[SCSI] remove broken driver cpqfc

Hopefully there should be a brand new replacement driver for this heap
of junk by the beginning of next year.

Acked By: Martin K. Petersen <mkp@mkp.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 0 insertions, 1530 deletions

diff --git a/drivers/scsi/cpqfcTSstructs.h b/drivers/scsi/cpqfcTSstructs.h
deleted file mode 100644
index 0bae3298c44b..000000000000
--- a/drivers/scsi/cpqfcTSstructs.h
+++ /dev/null
@@ -1,1530 +0,0 @@
-/* Copyright(c) 2000, Compaq Computer Corporation
- * Fibre Channel Host Bus Adapter 64-bit, 66MHz PCI 
- * Originally developed and tested on:
- * (front): [chip] Tachyon TS HPFC-5166A/1.2  L2C1090 ...
- *          SP# P225CXCBFIEL6T, Rev XC
- *          SP# 161290-001, Rev XD
- * (back): Board No. 010008-001 A/W Rev X5, FAB REV X5
- *  
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- * Written by Don Zimmerman
-*/
-#ifndef CPQFCTSSTRUCTS_H
-#define CPQFCTSSTRUCTS_H
-
-#include <linux/timer.h>  // timer declaration in our host data
-#include <linux/interrupt.h>
-#include <asm/atomic.h>
-#include "cpqfcTSioctl.h"
-
-#define DbgDelay(secs) { int wait_time; printk( " DbgDelay %ds ", secs); \
-                         for( wait_time=jiffies + (secs*HZ); \
-		         time_before(jiffies, wait_time) ;) ; }
-
-#define CPQFCTS_DRIVER_VER(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
-// don't forget to also change MODULE_DESCRIPTION in cpqfcTSinit.c
-#define VER_MAJOR 2
-#define VER_MINOR 5
-#define VER_SUBMINOR 4
-
-// Macros for kernel (esp. SMP) tracing using a PCI analyzer
-// (e.g. x86).
-//#define PCI_KERNEL_TRACE
-#ifdef PCI_KERNEL_TRACE
-#define PCI_TRACE(x) inl( fcChip->Registers.IOBaseL +x);
-#define PCI_TRACEO(x,y) outl( x, (fcChip->Registers.IOBaseL +y));
-#else
-
-#define PCI_TRACE(x) 
-#define PCI_TRACEO(x,y)
-#endif
-
-			 
-//#define DEBUG_CMND 1   // debug output for Linux Scsi CDBs
-//#define DUMMYCMND_DBG 1
-
-//#define DEBUG_CPQFCTS 1
-//#undef DEBUG_CPQFCTS 
-#ifdef DEBUG_CPQFCTS
-#define ENTER(x)	printk("cpqfcts : entering %s()\n", x);
-#define LEAVE(x)	printk("cpqfcts : leaving %s()\n", x);
-#define DEBUG(x)	x
-#else
-#define ENTER(x)
-#define LEAVE(x)
-#define DEBUG(x)
-#endif				/* DEBUG_CPQFCTS */
-
-//#define DEBUG_CPQFCTS_PCI 1
-//#undef DEBUG_CPQFCTS_PCI
-#if DEBUG_CPQFCTS_PCI
-#define DEBUG_PCI(x)	x
-#else
-#define DEBUG_PCI(x)
-#endif				/* DEBUG_CPQFCTS_PCI */
-
-#define STACHLITE66_TS12  "Compaq FibreChannel HBA Tachyon TS HPFC-5166A/1.2"
-#define STACHLITE66_TS13  "Compaq FibreChannel HBA Tachyon TS HPFC-5166A/1.3"
-#define STACHLITE_UNKNOWN "Compaq FibreChannel HBA Tachyon Chip/Board Ver??"
-#define SAGILENT_XL2_21   "Agilent FC HBA, Tachyon XL2 HPFC-5200B/2.1"
-
-// PDA is Peripheral Device Address, VSA is Volume Set Addressing
-// Linux SCSI parameters
-#define CPQFCTS_MAX_TARGET_ID 64
-
-// Note, changing CPQFCTS_MAX_LUN to less than 32 (e.g, 8) will result in
-// strange behavior if a box with more than, e.g. 8, is on the loop.
-#define CPQFCTS_MAX_LUN 32    // The RA-4x00 supports 32 (Linux SCSI supports 8)
-#define CPQFCTS_MAX_CHANNEL 0 // One FC port on cpqfcTS HBA
-
-#define CPQFCTS_CMD_PER_LUN 15 // power of 2 -1, must be >0 
-#define CPQFCTS_REQ_QUEUE_LEN (TACH_SEST_LEN/2) // must be < TACH_SEST_LEN
-
-#define LinuxVersionCode(v, p, s) (((v)<<16)+((p)<<8)+(s))
-#ifndef DECLARE_MUTEX_LOCKED
-#define DECLARE_MUTEX_LOCKED(sem) struct semaphore sem = MUTEX_LOCKED
-#endif
-
-#define DEV_NAME "cpqfcTS"
-
-struct SupportedPCIcards
-{
-  __u16 vendor_id;
-  __u16 device_id;
-};
-			 
-// nn:nn denotes bit field
-                            // TachyonHeader struct def.
-                            // the fields shared with ODB
-                            // need to have same value
-
-
-
-
-#ifndef BYTE
-//typedef UCHAR BYTE;
-typedef __u8 BYTE;
-#endif
-#ifndef UCHAR
-typedef __u8 UCHAR;
-#endif
-#ifndef LONG
-typedef __s32 LONG;
-#endif
-#ifndef ULONG
-typedef __u32 ULONG;
-#endif
-#ifndef PVOID
-typedef void * PVOID;
-#endif
-#ifndef USHORT
-typedef __u16 USHORT;
-#endif
-#ifndef BOOLEAN
-typedef __u8 BOOLEAN;
-#endif
-
-
-// macro for FC-PH reject codes
-// payload format for LS_RJT (FC payloads are big endian):
-//     byte  0         1         2         3  (MSB)
-// DWORD 0   01        00        00        00
-// DWORD 1   resvd     code      expl.     vendor
-
-#define LS_RJT_REASON( code, expl) (( code<<8) | (expl <<16))
-
-
-#define TachLiteSTATUS 0x12
-
-// Fibre Channel EXCHANGE status codes for Tachyon chips/ driver software
-// 32-bit ERROR word defines
-#define INVALID_ARGS 0x1
-#define LNKDWN_OSLS  0x2
-#define LNKDWN_LASER 0x4
-#define OUTQUE_FULL  0x8
-#define DRIVERQ_FULL 0x10
-#define SEST_FULL    0x20
-#define BAD_ALPA     0x40
-#define OVERFLOW     0x80  // inbound CM
-#define COUNT_ERROR     0x100  // inbound CM
-#define LINKFAIL_RX     0x200  // inbound CM
-#define ABORTSEQ_NOTIFY 0x400  // outbound CM
-#define LINKFAIL_TX     0x800  // outbound CM
-#define HOSTPROG_ERR     0x1000  // outbound CM
-#define FRAME_TO         0x2000  // outbound CM
-#define INV_ENTRY        0x4000  // outbound CM
-#define SESTPROG_ERR     0x8000  // outbound CM
-#define OUTBOUND_TIMEOUT 0x10000L // timeout waiting for Tachyon outbound CM
-#define INITIATOR_ABORT  0x20000L // initiator exchange timeout or O/S ABORT
-#define MEMPOOL_FAIL     0x40000L // O/S memory pool allocation failed
-#define FC2_TIMEOUT      0x80000L // driver timeout for lost frames
-#define TARGET_ABORT     0x100000L // ABTS received from FC port
-#define EXCHANGE_QUEUED  0x200000L // e.g. Link State was LDn on fcStart
-#define PORTID_CHANGED   0x400000L // fc Port address changed
-#define DEVICE_REMOVED   0x800000L // fc Port address changed
-// Several error scenarios result in SEST Exchange frames 
-// unexpectedly arriving in the SFQ
-#define SFQ_FRAME        0x1000000L // SFQ frames from open Exchange
-
-// Maximum number of Host Bus Adapters (HBA) / controllers supported
-// only important for mem allocation dimensions - increase as necessary
-
-#define MAX_ADAPTERS 8
-#define MAX_RX_PAYLOAD 1024  // hardware dependent max frame payload
-// Tach header struc defines
-#define SOFi3 0x7
-#define SOFf  0x8
-#define SOFn3 0xB
-#define EOFn  0x5
-#define EOFt  0x6
-
-// FCP R_CTL defines
-#define FCP_CMND 0x6
-#define FCP_XFER_RDY 0x5
-#define FCP_RSP 0x7
-#define FCP_RESPONSE 0x777 // (arbitrary #)
-#define NEED_FCP_RSP 0x77  // (arbitrary #)
-#define FCP_DATA 0x1
-
-#define RESET_TACH 0x100 // Reset Tachyon/TachLite
-#define SCSI_IWE 0x2000  // initiator write entry (for SEST)
-#define SCSI_IRE 0x3000  // initiator read entry (for SEST)
-#define SCSI_TRE 0x400  // target read entry (for SEST)
-#define SCSI_TWE 0x500  // target write entry (for SEST)
-#define TOGGLE_LASER 0x800
-#define LIP 0x900
-#define CLEAR_FCPORTS 99 // (arbitrary #) free mem for Logged in ports
-#define FMINIT 0x707     // (arbitrary) for Frame Manager Init command
-
-// BLS == Basic Link Service
-// ELS == Extended Link Service
-#define BLS_NOP 4
-#define BLS_ABTS 0x10   // FC-PH Basic Link Service Abort Sequence
-#define BLS_ABTS_ACC 0x100  // FC-PH Basic Link Service Abort Sequence Accept
-#define BLS_ABTS_RJT 0x101  // FC-PH Basic Link Service Abort Sequence Reject
-#define ELS_PLOGI 0x03  // FC-PH Port Login (arbitrary assign)
-#define ELS_SCR   0x70  // (arb assign) State Change Registration (Fabric)
-#define FCS_NSR   0x72  // (arb assign) Name Service Request (Fabric)
-#define ELS_FLOGI 0x44  // (arb assign) Fabric Login
-#define ELS_FDISC 0x41  // (arb assign) Fabric Discovery (Login)
-#define ELS_PDISC 0x50  // FC-PH2 Port Discovery
-#define ELS_ABTX  0x06  // FC-PH Abort Exchange 
-#define ELS_LOGO 0x05   // FC-PH Port Logout
-#define ELS_PRLI 0x20   // FCP-SCSI Process Login
-#define ELS_PRLO 0x21   // FCP-SCSI Process Logout
-#define ELS_LOGO_ACC 0x07   // {FC-PH} Port Logout Accept
-#define ELS_PLOGI_ACC 0x08  // {FC-PH} Port Login Accept
-#define ELS_ACC 0x18        // {FC-PH} (generic) ACCept
-#define ELS_PRLI_ACC 0x22  // {FCP-SCSI} Process Login Accept
-#define ELS_RJT 0x1000000
-#define SCSI_REPORT_LUNS 0x0A0
-#define FCP_TARGET_RESET 0x200
-
-#define ELS_LILP_FRAME 0x00000711 // 1st payload word of LILP frame
-
-#define SFQ_UNASSISTED_FCP  1  // ICM, DWord3, "Type" unassisted FCP
-#define SFQ_UNKNOWN         0x31 // (arbitrary) ICM, DWord3, "Type" unknown
-
-// these "LINK" bits refer to loop or non-loop
-#define LINKACTIVE 0x2    // fcLinkQ type - LINK UP Tachyon FM 'Lup' bit set
-#define LINKDOWN 0xf2     // fcLinkQ type - LINK DOWN Tachyon FM 'Ldn' bit set
-
-//#define VOLUME_SET_ADDRESSING 1 // "channel" or "bus" 1
-
-typedef struct      // 32 bytes hdr ONLY (e.g. FCP_DATA buffer for SEST)
-{
-  ULONG reserved;   // dword 0 (don't use)
-  ULONG sof_eof;
-  ULONG d_id;       // dword 2 - 31:24 R_CTL, 23:0 D_ID
-  ULONG s_id;       // dword 3 - 31:24 CS_CTL, 23:0 S_ID
-  ULONG f_ctl;      // dword 4 - 31:24 Type,  23:0 F_CTL
-  ULONG seq_cnt;    // dword 5 - 31:24 SEQ_ID, 23:16 DF_CTL, 15:0 SEQ_CNT
-  ULONG ox_rx_id;   // dword 6 - 31:16 OX_ID,  15:0 RX_ID
-  ULONG ro;         // dword 7 - relative offset
-} TachFCHDR;
-
-                    // NOTE!! the following struct MUST be 64 bytes.
-typedef struct      // 32 bytes hdr + 32 bytes payload
-{
-  ULONG reserved;   // dword 0 (don't use - must clear to 0)
-  ULONG sof_eof;    // dword 1 - 31:24 SOF:EOF, UAM,CLS, LCr, TFV, TimeStamp
-  ULONG d_id;       // dword 2 - 31:24 R_CTL, 23:0 D_ID
-  ULONG s_id;       // dword 3 - 31:24 CS_CTL, 23:0 S_ID
-  ULONG f_ctl;      // dword 4 - 31:24 Type,  23:0 F_CTL
-  ULONG seq_cnt;    // dword 5 - 31:24 SEQ_ID, 23:16 DF_CTL, 15:0 SEQ_CNT
-  ULONG ox_rx_id;   // dword 6 - 31:16 OX_ID,  15:0 RX_ID
-  ULONG ro;  // dword 7 - relative offset
-//---------
-  __u32 pl[8];              // dwords 8-15 frame data payload
-} TachFCHDR_CMND;
-
-
-typedef struct      // 32 bytes hdr + 120 bytes payload
-{
-  ULONG reserved;   // dword 0 (don't use - must clear to 0)
-  ULONG sof_eof;    // dword 1 - 31:24 SOF:EOF, UAM,CLS, LCr, TFV, TimeStamp
-  ULONG d_id;       // dword 2 - 31:24 R_CTL, 23:0 D_ID
-  ULONG s_id;       // dword 3 - 31:24 CS_CTL, 23:0 S_ID
-  ULONG f_ctl;      // dword 4 - 31:24 Type,  23:0 F_CTL
-  ULONG seq_cnt;    // dword 5 - 31:24 SEQ_ID, 23:16 DF_CTL, 15:0 SEQ_CNT
-  ULONG ox_rx_id;   // dword 6 - 31:16 OX_ID,  15:0 RX_ID
-  ULONG ro;  // dword 7 - relative offset
-//---------
-  __u32 pl[30];              // largest necessary payload (for LOGIN cmnds)
-} TachFCHDR_GCMND;
-
-typedef struct      // 32 bytes hdr + 64 bytes payload
-{
-  ULONG reserved;   // dword 0 (don't use)
-  ULONG sof_eof;
-  ULONG d_id;       // dword 2 - 31:24 R_CTL, 23:0 D_ID
-  ULONG s_id;       // dword 3 - 31:24 CS_CTL, 23:0 S_ID
-  ULONG f_ctl;      // dword 4 - 31:24 Type,  23:0 F_CTL
-  ULONG seq_cnt;    // dword 5 - 31:24 SEQ_ID, 23:16 DF_CTL, 15:0 SEQ_CNT
-  ULONG ox_rx_id;   // dword 6 - 31:16 OX_ID,  15:0 RX_ID
-  ULONG ro;  // dword 7 - relative offset
-//---------
-  __u32 pl[18]; // payload for FCP-RSP (response buffer) RA-4x00 is 72bytes
-} TachFCHDR_RSP;
-
-
-
-
-
-
-// Inbound Message Queue structures...
-typedef struct              // each entry 8 words (32 bytes)
-{
-  ULONG type;               // IMQ completion message types
-  ULONG word[7];            // remainder of structure
-                            // interpreted by IMQ type
-} TachyonIMQE;
-
-
-// Queues for TachLite not in original Tachyon
-// ERQ       - Exchange Request Queue (for outbound commands)
-// SFQ       - Single Frame Queue (for incoming frames)
-
-                            // Define Tachyon Outbound Command Que
-                            // (Since many Tachyon registers are Read
-                            // only, maintain copies for debugging)
-                            // most Tach ques need power-of-2 sizes,
-                            // where registers are loaded with po2 -1
-#define TACH_SEST_LEN 512   // TachLite SEST
-
-#define ELS_EXCHANGES 64    // e.g. PLOGI, RSCN, ...
-// define the total number of outstanding (simultaneous) exchanges
-#define TACH_MAX_XID (TACH_SEST_LEN + ELS_EXCHANGES)  // ELS exchanges
-
-#define ERQ_LEN 128         // power of 2, max 4096
-
-// Inbound Message Queue structures...
-#define IMQ_LEN 512              // minimum 4 entries [(power of 2) - 1]
-typedef struct                   // 8 words - 32 bytes
-{
-  TachyonIMQE QEntry[IMQ_LEN];
-  ULONG producerIndex;   // IMQ Producer Index register
-                                 // @32 byte align
-  ULONG consumerIndex;   // Consumer Index register (in Tachyon)
-  ULONG length;          // Length register
-  ULONG base;
-} TachyonIMQ;                    // @ 32 * IMQ_LEN align
-
-
-
-typedef struct           // inbound completion message
-{
-  ULONG Type;
-  ULONG Index;
-  ULONG TransferLength;
-} TachyonInbCM;
-
-
-
-// arbitrary numeric tags for TL structures
-#define TL_FCHS 1  // TachLite Fibre Channel Header Structure
-#define TL_IWE 2  // initiator write entry (for SEST)
-#define TL_TWE 3  // target write entry (for SEST)
-#define TL_IRE 4  // initiator read entry (for SEST)
-#define TL_TRE 5  // target read entry (for SEST)
-#define TL_IRB 6  // I/O request block
-
-                                // for INCOMING frames
-#define SFQ_LEN 32              // minimum 32 entries, max 4096
-
-typedef struct                  // Single Frame Que
-{
-  TachFCHDR_CMND QEntry[SFQ_LEN]; // must be 64 bytes!!
-  ULONG producerIndex;   // IMQ Producer Index register
-                                 // @32 byte align
-  ULONG consumerIndex;   // Consumer Index register (in Tachyon)
-  ULONG length;          // Length register
-  ULONG base;
-} TachLiteSFQ;
-
-
-typedef struct                 // I/O Request Block flags
-{
-  UCHAR  BRD : 1;
-  UCHAR      : 1; // reserved
-  UCHAR  SFA : 1;
-  UCHAR  DNC : 1;
-  UCHAR  DIN : 1;
-  UCHAR  DCM : 1;
-  UCHAR  CTS : 1;
-  UCHAR  SBV : 1;  // IRB entry valid - IRB'B' only
-} IRBflags;
-
-typedef struct                  // I/O Request Block
-{                          // Request 'A'
-  ULONG Req_A_SFS_Len;     // total frame len (hdr + payload), min 32
-  ULONG Req_A_SFS_Addr;    // 32-bit pointer to FCHS struct (to be sent)
-  ULONG Req_A_SFS_D_ID;    // 24-bit FC destination (i.e. 8 bit al_pa)
-  ULONG Req_A_Trans_ID;    // X_ID (OX_ID or RX_ID) and/or Index in SEST
-                           // Request 'B'
-  ULONG Req_B_SFS_Len;     // total frame len (hdr + payload), min 32
-  ULONG Req_B_SFS_Addr;    // 32-bit pointer to FCHS struct (to be sent)
-  ULONG Req_B_SFS_D_ID;    // 24-bit FC destination (i.e. 8 bit al_pa)
-  ULONG Req_B_Trans_ID;    // X_ID (OX_ID or RX_ID) and/or Index in SEST
-} TachLiteIRB;
-
-
-typedef struct           // TachLite placeholder for IRBs
-{                        // aligned @sizeof(ERQ) for TachLite
-                         // MAX commands is sum of SEST len and ERQ
-                         // we know that each SEST entry requires an
-                         // IRB (ERQ) entry; in addition, we provide
-                         // ERQ_LEN
-  TachLiteIRB QEntry[ERQ_LEN]; // Base register; entries 32 bytes ea.
-  ULONG consumerIndex;   // Consumer Index register
-  ULONG producerIndex;   // ERQ Producer Index register
-  ULONG length;          // Length register
-  ULONG base;            // copy of base ptr for debug
-                         // struct is sized for largest expected cmnd (LOGIN)
-} TachLiteERQ;
-
-// for now, just 32 bit DMA, eventually 40something, with code changes
-#define CPQFCTS_DMA_MASK ((unsigned long) (0x00000000FFFFFFFF))
-
-#define TL_MAX_SG_ELEM_LEN 0x7ffff  // Max buffer length a single S/G entry
-				// may represent (a hardware limitation).  The
-				// only reason to ever change this is if you
-				// want to exercise very-hard-to-reach code in
-				// cpqfcTSworker.c:build_SEST_sglist().
-
-#define TL_DANGER_SGPAGES 7  // arbitrary high water mark for # of S/G pages
-				// we must exceed to elicit a warning indicative
-				// of EXTREMELY large data transfers or 
-				// EXTREME memory fragmentation.
-				// (means we just used up 2048 S/G elements,
-				// Never seen this is real life, only in 
-				// testing with tricked up driver.)
-
-#define TL_EXT_SG_PAGE_COUNT 256  // Number of Extended Scatter/Gather a/l PAIRS
-                                  // Tachyon register (IOBaseU 0x68)
-                                  // power-of-2 value ONLY!  4 min, 256 max
-
-                          // byte len is #Pairs * 2 ULONG/Pair * 4 bytes/ULONG
-#define TL_EXT_SG_PAGE_BYTELEN (TL_EXT_SG_PAGE_COUNT *2 *4)
-
-
-
-// SEST entry types: IWE, IRE, TWE, TRE
-typedef struct 
-{
-  ULONG Hdr_Len;
-  ULONG Hdr_Addr;
-  ULONG RSP_Len;
-  ULONG RSP_Addr;
-  ULONG Buff_Off;
-#define USES_EXTENDED_SGLIST(this_sest, x_ID) \
-	(!((this_sest)->u[ x_ID ].IWE.Buff_Off & 0x80000000))
-  ULONG Link;
-  ULONG RX_ID;
-  ULONG Data_Len;
-  ULONG Exp_RO;
-  ULONG Exp_Byte_Cnt;
-   // --- extended/local Gather Len/Address pairs
-  ULONG GLen1;
-  ULONG GAddr1;
-  ULONG GLen2;
-  ULONG GAddr2;
-  ULONG GLen3;
-  ULONG GAddr3;
-} TachLiteIWE;
-
-
-typedef struct 
-{
-  ULONG Seq_Accum;
-  ULONG reserved;       // must clear to 0
-  ULONG RSP_Len;
-  ULONG RSP_Addr;
-  ULONG Buff_Off;
-  ULONG Buff_Index;           // ULONG 5
-  ULONG Exp_RO;
-  ULONG Byte_Count;
-  ULONG reserved_;      // ULONG 8
-  ULONG Exp_Byte_Cnt;
-   // --- extended/local Scatter Len/Address pairs
-  ULONG SLen1;
-  ULONG SAddr1;
-  ULONG SLen2;
-  ULONG SAddr2;
-  ULONG SLen3;
-  ULONG SAddr3;
-} TachLiteIRE;
-
-
-typedef struct          // Target Write Entry
-{
-  ULONG Seq_Accum;      // dword 0
-  ULONG reserved;       // dword 1  must clear to 0
-  ULONG Remote_Node_ID;
-  ULONG reserved1;      // dword 3  must clear to 0
-  ULONG Buff_Off;
-  ULONG Buff_Index;     // ULONG 5
-  ULONG Exp_RO;
-  ULONG Byte_Count;
-  ULONG reserved_;      // ULONG 8
-  ULONG Exp_Byte_Cnt;
-   // --- extended/local Scatter Len/Address pairs
-  ULONG SLen1;
-  ULONG SAddr1;
-  ULONG SLen2;
-  ULONG SAddr2;
-  ULONG SLen3;
-  ULONG SAddr3;
-} TachLiteTWE;
-
-typedef struct      
-{
-  ULONG Hdr_Len;
-  ULONG Hdr_Addr;
-  ULONG RSP_Len;        // DWord 2
-  ULONG RSP_Addr;
-  ULONG Buff_Off;
-  ULONG Buff_Index;     // DWord 5
-  ULONG reserved;
-  ULONG Data_Len;
-  ULONG reserved_;
-  ULONG reserved__;
-   // --- extended/local Gather Len/Address pairs
-  ULONG GLen1;          // DWord A
-  ULONG GAddr1;
-  ULONG GLen2;
-  ULONG GAddr2;
-  ULONG GLen3;
-  ULONG GAddr3;
-} TachLiteTRE;
-
-typedef struct ext_sg_page_ptr_t *PSGPAGES;
-typedef struct ext_sg_page_ptr_t 
-{
-  unsigned char page[TL_EXT_SG_PAGE_BYTELEN * 2]; // 2x for alignment
-  dma_addr_t busaddr; 	// need the bus addresses and
-  unsigned int maplen;  // lengths for later pci unmapping.
-  PSGPAGES next;
-} SGPAGES; // linked list of S/G pairs, by Exchange
-
-typedef struct                  // SCSI Exchange State Table
-{
-  union                         // Entry can be IWE, IRE, TWE, TRE
-  {                             // 64 bytes per entry
-    TachLiteIWE IWE;
-    TachLiteIRE IRE;
-    TachLiteTWE TWE;
-    TachLiteTRE TRE;
-  } u[TACH_SEST_LEN];
-
-  TachFCHDR DataHDR[TACH_SEST_LEN]; // for SEST FCP_DATA frame hdr (no pl)
-  TachFCHDR_RSP RspHDR[TACH_SEST_LEN]; // space for SEST FCP_RSP frame
-  PSGPAGES sgPages[TACH_SEST_LEN]; // head of linked list of Pool-allocations
-  ULONG length;          // Length register
-  ULONG base;            // copy of base ptr for debug
-} TachSEST;
-
-
-
-typedef struct                  // each register has it's own address
-                                // and value (used for write-only regs)
-{
-  void* address;
-  volatile ULONG value;
-} FCREGISTER;
-
-typedef struct         // Host copy - TachLite Registers
-{
-  ULONG IOBaseL, IOBaseU;  // I/O port lower and upper TL register addresses
-  ULONG MemBase;           // memory mapped register addresses
-  void* ReMapMemBase;      // O/S VM reference for MemBase
-  ULONG wwn_hi;            // WWN is set once at startup
-  ULONG wwn_lo;
-  ULONG my_al_pa;          // al_pa received after LIP()
-  ULONG ROMCTR;            // flags for on-board RAM/ROM
-  ULONG RAMBase;           // on-board RAM (i.e. some Tachlites)
-  ULONG SROMBase;          // on-board EEPROM (some Tachlites)
-  ULONG PCIMCTR;           // PCI Master Control Reg (has bus width)
-
-  FCREGISTER INTEN;        // copy of interrupt enable mask
-  FCREGISTER INTPEND;      // interrupt pending
-  FCREGISTER INTSTAT;      // interrupt status
-  FCREGISTER SFQconsumerIndex; 
-  FCREGISTER ERQproducerIndex; 
-  FCREGISTER TYconfig;   // TachYon (chip level)
-  FCREGISTER TYcontrol;
-  FCREGISTER TYstatus;
-  FCREGISTER FMconfig;   // Frame Manager (FC loop level)
-  FCREGISTER FMcontrol;
-  FCREGISTER FMstatus;
-  FCREGISTER FMLinkStatus1;
-  FCREGISTER FMLinkStatus2;
-  FCREGISTER FMBB_CreditZero;
-  FCREGISTER status;
-  FCREGISTER ed_tov;     // error detect time-out value
-  FCREGISTER rcv_al_pa;  // received arb. loop physical address
-  FCREGISTER primitive;  // e.g. LIP(), OPN(), ...
-} TL_REGISTERS;
-
-
-
-typedef struct 
-{
-  ULONG ok;
-  ULONG invalidArgs;
-  ULONG linkDown;
-  ULONG linkUp;
-  ULONG outQueFull;
-  ULONG SESTFull;
-  ULONG hpe;    // host programming err (from Tach)
-  ULONG FC4aborted; // aborts from Application or upper driver layer
-  ULONG FC2aborted; // aborts from our driver's timeouts
-  ULONG timeouts;   // our driver timeout (on individual exchanges)
-  ULONG logouts;    // explicit - sent LOGO; implicit - device removed
-  ULONG retries;
-  ULONG linkFailTX;
-  ULONG linkFailRX;
-  ULONG CntErrors;  // byte count expected != count received (typ. SEST)
-  ULONG e_stores;   // elastic store errs
-  ULONG resets;     // hard or soft controller resets
-  ULONG FMinits;    // TACH Frame Manager Init (e.g. LIPs)
-  ULONG lnkQueFull;  // too many LOGIN, loop commands
-  ULONG ScsiQueFull; // too many FCP-SCSI inbound frames
-  ULONG LossofSignal;   // FM link status 1 regs
-  ULONG BadRXChar;   // FM link status 1 regs
-  ULONG LossofSync;   // FM link status 1 regs
-  ULONG Rx_EOFa;   // FM link status 2 regs (received EOFa)
-  ULONG Dis_Frm;   // FM link status 2 regs (discarded frames)
-  ULONG Bad_CRC;   // FM link status 2 regs
-  ULONG BB0_Timer; //  FM BB_Credit Zero Timer Reg
-  ULONG loopBreaks; // infinite loop exits
-  ULONG lastBB0timer;  // static accum. buffer needed by Tachlite
-} FCSTATS;
-
-
-typedef struct               // Config Options
-{                            // LS Bit first
-  USHORT        : 1;           // bit0:
-  USHORT  flogi : 1;           // bit1: We sent FLOGI - wait for Fabric logins
-  USHORT  fabric: 1;           // bit2: Tachyon detected Fabric (FM stat LG)
-  USHORT  LILPin: 1;           // bit3: We can use an FC-AL LILP frame
-  USHORT  target: 1;           // bit4: this Port has SCSI target capability
-  USHORT  initiator:    1;     // bit5: this Port has SCSI initiator capability
-  USHORT  extLoopback:  1;     // bit6: loopback at GBIC
-  USHORT  intLoopback:  1;     // bit7: loopback in HP silicon
-  USHORT        : 1;           // bit8:
-  USHORT        : 1;           // bit9:
-  USHORT        : 1;           // bit10:
-  USHORT        : 1;           // bit11:
-  USHORT        : 1;           // bit12:
-  USHORT        : 1;           // bit13:
-  USHORT        : 1;           // bit14:
-  USHORT        : 1;           // bit15:
-} FC_OPTIONS;
-
-
-
-typedef struct dyn_mem_pair
-{
-  void *BaseAllocated;  // address as allocated from O/S;
-  unsigned long AlignedAddress; // aligned address (used by Tachyon DMA)
-  dma_addr_t dma_handle;
-  size_t size;
-} ALIGNED_MEM;
-
-
-
-
-// these structs contain only CRUCIAL (stuff we actually use) parameters
-// from FC-PH(n) logins.  (Don't save entire LOGIN payload to save mem.)
-
-// Implicit logout happens when the loop goes down - we require PDISC
-// to restore.  Explicit logout is when WE decide never to talk to someone,
-// or when a target refuses to talk to us, i.e. sends us a LOGO frame or
-// LS_RJT reject in response to our PLOGI request.
-
-#define IMPLICIT_LOGOUT 1
-#define EXPLICIT_LOGOUT 2
-
-typedef struct 
-{
-  UCHAR channel; // SCSI "bus"
-  UCHAR target;
-  UCHAR InqDeviceType;  // byte 0 from SCSI Inquiry response
-  UCHAR VolumeSetAddressing;  // FCP-SCSI LUN coding (40h for VSA)
-  UCHAR LunMasking;     // True if selective presentation supported
-  UCHAR lun[CPQFCTS_MAX_LUN];
-} SCSI_NEXUS;
-
-
-typedef struct        
-{
-  union 
-  {
-    UCHAR ucWWN[8];  // a FC 64-bit World Wide Name/ PortID of target
-                     // addressing of single target on single loop...
-    u64 liWWN;
-  } u;
-
-  ULONG port_id;     // a FC 24-bit address of port (lower 8 bits = al_pa)
-
-#define REPORT_LUNS_PL 256  
-  UCHAR ReportLunsPayload[REPORT_LUNS_PL];
-  
-  SCSI_NEXUS ScsiNexus; // LUNs per FC device
-
-  ULONG LOGO_counter; // might try several times before logging out for good
-  ULONG LOGO_timer;   // after LIP, ports expecting PDISC must time-out and
-                      // LOGOut if successful PDISC not completed in 2 secs
-
-  ULONG concurrent_seq;  // must be 1 or greater
-  ULONG rx_data_size;    // e.g. 128, 256, 1024, 2048 per FC-PH spec
-  ULONG BB_credit;
-  ULONG EE_credit;
-
-  ULONG fcp_info;        // from PRLI (i.e. INITIATOR/ TARGET flags)
-                         // flags for login process
-  BOOLEAN Originator;    // Login sequence Originated (if false, we
-                         // responded to another port's login sequence)
-  BOOLEAN plogi;         // PLOGI frame ACCepted (originated or responded)
-  BOOLEAN pdisc;         // PDISC frame was ORIGINATED (self-login logic)
-  BOOLEAN prli;          // PRLI frame ACCepted (originated or responded)
-  BOOLEAN flogi;         // FLOGI frame ACCepted (originated or responded)
-  BOOLEAN logo;          // port permanently logged out (invalid login param)
-  BOOLEAN flogiReq;      // Fabric login required (set in LIP process)
-  UCHAR highest_ver;
-  UCHAR lowest_ver;
-
-  
-  // when the "target" (actually FC Port) is waiting for login
-  // (e.g. after Link reset), set the device_blocked bit;
-  // after Port completes login, un-block target.
-  UCHAR device_blocked; // see Scsi_Device struct
-
-                    // define singly-linked list of logged-in ports
-                    // once a port_id is identified, it is remembered,
-                    // even if the port is removed indefinitely
-  PVOID pNextPort;  // actually, type PFC_LOGGEDIN_PORT; void for Compiler
-
-} FC_LOGGEDIN_PORT, *PFC_LOGGEDIN_PORT;
-
-
-
-// This serves as the ESB (Exchange Status Block),
-// and has timeout counter; used for ABORTs
-typedef struct                
-{                                  // FC-1 X_IDs
-  ULONG type;            // ELS_PLOGI, SCSI_IWE, ... (0 if free)
-  PFC_LOGGEDIN_PORT pLoggedInPort; // FC device on other end of Exchange
-  Scsi_Cmnd *Cmnd;       // Linux SCSI command packet includes S/G list
-  ULONG timeOut;         // units of ??, DEC by driver, Abort when 0
-  ULONG reTries;         // need one or more retries?
-  ULONG status;          // flags indicating errors (0 if none)
-  TachLiteIRB IRB;       // I/O Request Block, gets copied to ERQ
-  TachFCHDR_GCMND fchs;  // location of IRB's Req_A_SFS_Addr
-} FC_EXCHANGE, *PFC_EXCHANGE;
-
-// Unfortunately, Linux limits our kmalloc() allocations to 128k.
-// Because of this and the fact that our ScsiRegister allocation
-// is also constrained, we move this large structure out for
-// allocation after Scsi Register.
-// (In other words, this cumbersome indirection is necessary
-// because of kernel memory allocation constraints!)
-
-typedef struct // we will allocate this dynamically
-{
-  FC_EXCHANGE fcExchange[ TACH_MAX_XID ];
-} FC_EXCHANGES;
-
-
-
-
-
-
-
-
-
-
-
-typedef struct
-{
-  char Name[64]; // name of controller ("HP Tachlite TL Rev2.0, 33MHz, 64bit bus")
-  //PVOID  pAdapterDevExt; // back pointer to device object/extension
-  ULONG ChipType;        // local numeric key for Tachyon Type / Rev.
-  ULONG status;              // our Driver - logical status
-  
-  TL_REGISTERS Registers;    // reg addresses & host memory copies
-                             // FC-4 mapping of 'transaction' to X_IDs
-  UCHAR LILPmap[32*4];       // Loop Position Map of ALPAs (late FC-AL only)
-  FC_OPTIONS Options;        // e.g. Target, Initiator, loopback...
-  UCHAR highest_FCPH_ver;    // FC-PH version limits
-  UCHAR lowest_FCPH_ver;     // FC-PH version limits
-
-  FC_EXCHANGES *Exchanges;  
-  ULONG fcLsExchangeLRU;       // Least Recently Used counter (Link Service)
-  ULONG fcSestExchangeLRU;       // Least Recently Used counter (FCP-SCSI)
-  FC_LOGGEDIN_PORT fcPorts;  // linked list of every FC port ever seen
-  FCSTATS fcStats;           // FC comm err counters
-
-                             // Host memory QUEUE pointers
-  TachLiteERQ *ERQ;          // Exchange Request Que 
-  TachyonIMQ *IMQ;           // Inbound Message Que 
-  TachLiteSFQ *SFQ;          // Single Frame Queue
-  TachSEST *SEST;            // SCSI Exchange State Table
-
-  dma_addr_t exch_dma_handle;
-
-  // these function pointers are for "generic" functions, which are
-  // replaced with Host Bus Adapter types at
-  // runtime.
-  int (*CreateTachyonQues)( void* , int);
-  int (*DestroyTachyonQues)( void* , int);
-  int (*LaserControl)(void*, int );   // e.g. On/Off
-  int (*ResetTachyon)(void*, int );
-  void (*FreezeTachyon)(void*, int );
-  void (*UnFreezeTachyon)(void*, int );
-  int (*InitializeTachyon)(void*, int, int );
-  int (*InitializeFrameManager)(void*, int );
-  int (*ProcessIMQEntry)(void*);
-  int (*ReadWriteWWN)(void*, int ReadWrite);
-  int (*ReadWriteNVRAM)(void*, void*, int ReadWrite);
-
-} TACHYON, *PTACHYON;
-
-
-void cpqfcTSClearLinkStatusCounters(TACHYON * fcChip);
-
-int CpqTsCreateTachLiteQues( void* pHBA, int opcode);
-int CpqTsDestroyTachLiteQues( void* , int);
-int CpqTsInitializeTachLite( void *pHBA, int opcode1, int opcode2);
-
-int CpqTsProcessIMQEntry(void* pHBA);
-int CpqTsResetTachLite(void *pHBA, int type);
-void CpqTsFreezeTachlite(void *pHBA, int type);
-void CpqTsUnFreezeTachlite(void *pHBA, int type);
-int CpqTsInitializeFrameManager(void *pHBA, int);
-int CpqTsLaserControl( void* addrBase, int opcode );
-int CpqTsReadWriteWWN(void*, int ReadWrite);
-int CpqTsReadWriteNVRAM(void*, void* data, int ReadWrite);
-
-void cpqfcTS_WorkTask( struct Scsi_Host *HostAdapter);
-void cpqfcTSWorkerThread( void *host);
-
-int cpqfcTS_GetNVRAM_data( UCHAR *wwnbuf, UCHAR *buf );
-ULONG cpqfcTS_ReadNVRAM( void* GPIOin, void* GPIOout , USHORT count,
-	UCHAR *buf );
-
-BOOLEAN tl_write_i2c_nvram( void* GPIOin, void* GPIOout,
-  USHORT startOffset,  // e.g. 0x2f for WWN start
-  USHORT count,
-  UCHAR *buf );
-
-
-// define misc functions 
-int cpqfcTSGetLPSM( PTACHYON fcChip, char cErrorString[]);
-int cpqfcTSDecodeGBICtype( PTACHYON fcChip, char cErrorString[]);
-void* fcMemManager( struct pci_dev *pdev,
-		ALIGNED_MEM *dyn_mem_pair, ULONG n_alloc, ULONG ab,
-                   ULONG ulAlignedAddress, dma_addr_t *dma_handle);
-
-void BigEndianSwap(  UCHAR *source, UCHAR *dest,  USHORT cnt);
-
-//ULONG virt_to_phys( PVOID virtaddr );
-                  
-
-// Linux interrupt handler
-irqreturn_t cpqfcTS_intr_handler( int irq,void *dev_id,struct pt_regs *regs);
-void cpqfcTSheartbeat( unsigned long ptr );
-
-
-
-// The biggest Q element we deal with is Aborts - we
-// need 4 bytes for x_ID, and a Scsi_Cmnd (~284 bytes)
-//#define LINKQ_ITEM_SIZE ((4+sizeof(Scsi_Cmnd)+3)/4)
-#define LINKQ_ITEM_SIZE (3*16)
-typedef struct
-{
-  ULONG Type;              // e.g. LINKUP, SFQENTRY, PDISC, BLS_ABTS, ...
-  ULONG ulBuff[ LINKQ_ITEM_SIZE ];
-} LINKQ_ITEM;
-
-#define FC_LINKQ_DEPTH TACH_MAX_XID
-typedef struct
-{
-  ULONG producer;
-  ULONG consumer;  // when producer equals consumer, Q empty
-
-  LINKQ_ITEM Qitem[ FC_LINKQ_DEPTH ];
-
-} FC_LINK_QUE, *PFC_LINK_QUE;
-
-
-     // DPC routines post to here on Inbound SCSI frames
-     // User thread processes
-#define FC_SCSIQ_DEPTH 32
-
-typedef struct
-{
-  int Type;              // e.g. SCSI
-  ULONG ulBuff[ 3*16 ];
-} SCSIQ_ITEM;
-
-typedef struct
-{
-  ULONG producer;
-  ULONG consumer;  // when producer equals consumer, Q empty
-
-  SCSIQ_ITEM Qitem[ FC_SCSIQ_DEPTH ];
-
-} FC_SCSI_QUE, *PFC_SCSI_QUE;
-
-typedef struct {
-	/* This is tacked on to a Scsi_Request in upper_private_data 
-	   for pasthrough ioctls, as a place to hold data that can't 
-	   be stashed anywhere else in the Scsi_Request.  We differentiate
-	   this from _real_ upper_private_data by checking if the virt addr
-	   is within our special pool.  */
-	ushort bus;
-	ushort pdrive;
-} cpqfc_passthru_private_t;
-
-#define CPQFC_MAX_PASSTHRU_CMDS 100
-
-#define DYNAMIC_ALLOCATIONS 4  // Tachyon aligned allocations: ERQ,IMQ,SFQ,SEST
-
-// Linux space allocated per HBA (chip state, etc.)
-typedef struct 
-{
-  struct Scsi_Host *HostAdapter; // back pointer to Linux Scsi struct
-
-  TACHYON fcChip;    // All Tachyon registers, Queues, functions
-  ALIGNED_MEM dynamic_mem[DYNAMIC_ALLOCATIONS];
-
-  struct pci_dev *PciDev;
-  dma_addr_t fcLQ_dma_handle;
-
-  Scsi_Cmnd *LinkDnCmnd[CPQFCTS_REQ_QUEUE_LEN]; // collects Cmnds during LDn
-                                                // (for Acceptable targets)
-  Scsi_Cmnd *BoardLockCmnd[CPQFCTS_REQ_QUEUE_LEN]; // SEST was full
-  
-  Scsi_Cmnd *BadTargetCmnd[CPQFCTS_MAX_TARGET_ID]; // missing targets
-
-  u_char HBAnum;     // 0-based host number
-
-
-  struct timer_list cpqfcTStimer; // FC utility timer for implicit
-                                  // logouts, FC protocol timeouts, etc.
-  int fcStatsTime;  // Statistics delta reporting time
-
-  struct task_struct *worker_thread; // our kernel thread
-  int PortDiscDone;    // set by SendLogins(), cleared by LDn
-  
-  struct semaphore *TachFrozen;
-  struct semaphore *TYOBcomplete;    // handshake for Tach outbound frames
-  struct semaphore *fcQueReady;      // FibreChannel work for our kernel thread
-  struct semaphore *notify_wt;       // synchronizes kernel thread kill
-  struct semaphore *BoardLock;
-  
-  PFC_LINK_QUE fcLQ;             // the WorkerThread operates on this
-
-  spinlock_t hba_spinlock;           // held/released by WorkerThread
-  cpqfc_passthru_private_t *private_data_pool;
-  unsigned long *private_data_bits;
-
-} CPQFCHBA;
-
-#define	CPQ_SPINLOCK_HBA( x )   spin_lock(&x->hba_spinlock);
-#define CPQ_SPINUNLOCK_HBA(x)   spin_unlock(&x->hba_spinlock);
-
-
-
-void cpqfcTSImplicitLogout( CPQFCHBA* cpqfcHBAdata,
-		PFC_LOGGEDIN_PORT pFcPort);
-
-
-void cpqfcTSTerminateExchange( CPQFCHBA*, SCSI_NEXUS *target, int );
-
-PFC_LOGGEDIN_PORT fcPortLoggedIn( 
-   CPQFCHBA *cpqfcHBAdata, 
-   TachFCHDR_GCMND* fchs, 
-   BOOLEAN, 
-   BOOLEAN);
-void fcProcessLoggedIn( 
-   CPQFCHBA *cpqfcHBAdata, TachFCHDR_GCMND* fchs);
-
-
-ULONG cpqfcTSBuildExchange( 
-  CPQFCHBA *cpqfcHBAdata,
-  ULONG type, // e.g. PLOGI
-  TachFCHDR_GCMND* InFCHS,  // incoming FCHS
-  void *Data,               // the CDB, scatter/gather, etc.  
-  LONG *ExchangeID );       // allocated exchange ID
-
-ULONG cpqfcTSStartExchange( 
-  CPQFCHBA *cpqfcHBAdata,
-  LONG ExchangeID );
-
-void cpqfcTSCompleteExchange( 
-       struct pci_dev *pcidev,
-       PTACHYON fcChip, 
-       ULONG exchange_ID);
-
-
-PFC_LOGGEDIN_PORT  fcFindLoggedInPort( 
-  PTACHYON fcChip, 
-  Scsi_Cmnd *Cmnd,  // (We want the channel/target/lun Nexus from Cmnd)
-  ULONG port_id,  // search linked list for al_pa, or
-  UCHAR wwn[8],    // search linked list for WWN, or...
-  PFC_LOGGEDIN_PORT *pLastLoggedInPort
-);
-
-void cpqfcTSPutLinkQue( 
-  CPQFCHBA *cpqfcHBAdata, 
-  int Type, 
-  void *QueContent);
-
-void fcPutScsiQue( 
-  CPQFCHBA *cpqfcHBAdata, 
-  int Type, 
-  void *QueContent);
-
-void fcLinkQReset(
-   CPQFCHBA *);
-void fcScsiQReset(
-   CPQFCHBA *);
-void fcSestReset(
-   CPQFCHBA *);
-
-void cpqfc_pci_unmap(struct pci_dev *pcidev, 
-	Scsi_Cmnd *cmd, 
-	PTACHYON fcChip, 
-	ULONG x_ID);
-
-extern const UCHAR valid_al_pa[];
-extern const int number_of_al_pa;
-
-#define FCP_RESID_UNDER   0x80000
-#define FCP_RESID_OVER    0x40000
-#define FCP_SNS_LEN_VALID 0x20000
-#define FCP_RSP_LEN_VALID 0x10000
-
-// RSP_CODE definitions (dpANS Fibre Channel Protocol for SCSI, pg 34)
-#define FCP_DATA_LEN_NOT_BURST_LEN 0x1000000
-#define FCP_CMND_FIELD_INVALID     0x2000000
-#define FCP_DATA_RO_NOT_XRDY_RO    0x3000000
-#define FCP_TASKFUNCTION_NS        0x4000000
-#define FCP_TASKFUNCTION_FAIL      0x5000000
-
-// FCP-SCSI response status struct
-typedef struct  // see "TachFCHDR_RSP" definition - 64 bytes
-{
-  __u32 reserved;
-  __u32 reserved1;
-  __u32 fcp_status;    // field validity and SCSI status
-  __u32 fcp_resid;
-  __u32 fcp_sns_len;   // length of FCP_SNS_INFO field
-  __u32 fcp_rsp_len;   // length of FCP_RSP_INFO field (expect 8)
-  __u32 fcp_rsp_info;  // 4 bytes of FCP protocol response information
-  __u32 fcp_rsp_info2; // (4 more bytes, since most implementations use 8)
-  __u8  fcp_sns_info[36]; // bytes for SCSI sense (ASC, ASCQ)
-
-} FCP_STATUS_RESPONSE, *PFCP_STATUS_RESPONSE;
-
-
-// Fabric State Change Registration
-typedef struct scrpl
-{
-  __u32 command;
-  __u32 function;
-} SCR_PL;
-
-// Fabric Name Service Request
-typedef struct nsrpl
-{
-  __u32 CT_Rev;  // (& IN_ID)   WORD 0
-  __u32 FCS_Type;            // WORD 1
-  __u32 Command_code;        // WORD 2
-  __u32 reason_code;         // WORD 3
-  __u32 FCP;                 // WORD 4 (lower byte)
-  
-} NSR_PL;
-
-
-
-// "FC.H"
-#define MAX_RX_SIZE		0x800	// Max Receive Buffer Size is 2048
-#define MIN_RX_SIZE		0x100	// Min Size is 256, per FC-PLDA Spec
-#define	MAX_TARGET_RXIDS	SEST_DEPTH
-#define TARGET_RX_SIZE		SEST_BUFFER_LENGTH
-
-#define CLASS_1			0x01
-#define CLASS_2			0x02
-#define CLASS_3			0x03
-
-#define FC_PH42			0x08
-#define FC_PH43			0x09
-#define FC_PH3			0x20
-
-#define RR_TOV			2	// Minimum Time for target to wait for
-					// PDISC after a LIP.
-#define E_D_TOV			2	// Minimum Time to wait for Sequence
-					// Completion.
-#define R_A_TOV			0	// Minimum Time for Target to wait 
-					// before reclaiming resources.
-//
-//	R_CTL Field
-//
-//	Routing Bits (31-28)
-//
-#define FC4_DEVICE_DATA		0x00000000
-#define EXT_LINK_DATA		0x20000000
-#define FC4_LINK_DATA		0x30000000
-#define VIDEO_DATA		0x40000000
-#define BASIC_LINK_DATA		0x80000000
-#define LINK_CONTROL		0xC0000000
-#define ROUTING_MASK		0xF0000000
-
-//
-//	Information Bits (27-24)
-//
-#define UNCAT_INFORMATION	0x00000000
-#define SOLICITED_DATA		0x01000000
-#define UNSOLICITED_CONTROL	0x02000000
-#define SOLICITED_CONTROL	0x03000000
-#define UNSOLICITED_DATA	0x04000000
-#define DATA_DESCRIPTOR		0x05000000
-#define UNSOLICITED_COMMAND	0x06000000
-#define COMMAND_STATUS		0x07000000
-#define INFO_MASK		0x0F000000
-//
-//	(Link Control Codes)
-//
-#define ACK_1			0x00000000
-#define ACK_0_OR_N		0x01000000
-#define P_RJT			0x02000000 
-#define F_RJT			0x03000000 
-#define P_BSY			0x04000000
-#define FABRIC_BUSY_TO_DF	0x05000000	// Fabric Busy to Data Frame
-#define FABRIC_BUSY_TO_LC	0x06000000	// Fabric Busy to Link Ctl Frame
-#define LINK_CREDIT_RESET	0x07000000
-//
-//	(Link Service Command Codes)
-//
-//#define LS_RJT			0x01000000	// LS Reject
-
-#define LS_ACC			0x02000000	// LS Accept
-#define LS_PLOGI		0x03000000	// N_PORT Login
-#define LS_FLOGI		0x04000000	// F_PORT Login
-#define LS_LOGO			0x05000000	// Logout
-#define LS_ABTX			0x06000000	// Abort Exchange
-#define LS_RCS			0x07000000	// Read Connection Status
-#define LS_RES			0x08000000	// Read Exchange Status
-#define LS_RSS			0x09000000	// Read Sequence Status
-#define LS_RSI			0x0A000000	// Request Seq Initiative
-#define LS_ESTS			0x0B000000	// Establish Steaming
-#define LS_ESTC			0x0C000000	// Estimate Credit
-#define LS_ADVC			0x0D000000	// Advice Credit
-#define LS_RTV			0x0E000000	// Read Timeout Value
-#define LS_RLS			0x0F000000	// Read Link Status
-#define LS_ECHO			0x10000000	// Echo
-#define LS_TEST			0x11000000	// Test
-#define LS_RRQ			0x12000000	// Reinstate Rec. Qual.
-#define LS_PRLI			0x20000000	// Process Login
-#define LS_PRLO			0x21000000	// Process Logout
-#define LS_TPRLO		0x24000000	// 3rd Party Process Logout
-#define LS_PDISC		0x50000000	// Process Discovery
-#define LS_FDISC		0x51000000	// Fabric Discovery
-#define LS_ADISC		0x52000000	// Discover Address
-#define LS_RNC			0x53000000	// Report Node Capability
-#define LS_SCR                  0x62000000      // State Change Registration
-#define LS_MASK			0xFF000000	
-
-//
-// 	TYPE Bit Masks
-//
-#define BASIC_LINK_SERVICE	0x00000000
-#define EXT_LINK_SERVICE	0x01000000
-
-#define LLC			0x04000000
-#define LLC_SNAP		0x05000000
-#define SCSI_FCP		0x08000000
-#define SCSI_GPP		0x09000000
-#define IPI3_MASTER		0x11000000
-#define IPI3_SLAVE		0x12000000
-#define IPI3_PEER		0x13000000
-#define CP_IPI3_MASTER		0x15000000
-#define CP_IPI3_SLAVE		0x16000000
-#define CP_IPI3_PEER		0x17000000
-#define SBCCS_CHANNEL		0x19000000
-#define SBCCS_CONTROL		0x1A000000
-#define FIBRE_SERVICES		0x20000000
-#define FC_FG			0x21000000
-#define FC_XS			0x22000000
-#define FC_AL			0x23000000
-#define SNMP			0x24000000
-#define HIPPI_FP		0x40000000
-#define TYPE_MASK		0xFF000000
-
-typedef struct {
-	UCHAR seq_id_valid;
-	UCHAR seq_id;
-	USHORT reserved;  // 2 bytes reserved
-	ULONG ox_rx_id;
-	USHORT low_seq_cnt;
-	USHORT high_seq_cnt;
-} BA_ACC_PAYLOAD;
-
-typedef struct {
-	UCHAR reserved;
-	UCHAR reason_code;
-	UCHAR reason_explain;
-	UCHAR vendor_unique;
-} BA_RJT_PAYLOAD;
-
-
-typedef struct {
-	ULONG 	command_code;
-	ULONG 	sid;
-	USHORT	ox_id;
-	USHORT	rx_id;
-} RRQ_MESSAGE;
-
-typedef struct {
-	ULONG command_code;
-	UCHAR vendor;
-	UCHAR explain;
-	UCHAR reason;
-	UCHAR reserved;
-} REJECT_MESSAGE;
-
-
-#define	N_OR_F_PORT		0x1000
-#define RANDOM_RELATIVE_OFFSET	0x4000
-#define CONTINUOSLY_INCREASING	0x8000
-
-#define CLASS_VALID		0x8000
-#define INTERMIX_MODE		0x4000
-#define TRANSPARENT_STACKED	0x2000
-#define LOCKDOWN_STACKED	0x1000
-#define SEQ_DELIVERY		0x800
-
-#define XID_NOT_SUPPORTED	0x00
-#define XID_SUPPORTED		0x4000
-#define XID_REQUIRED		0xC000
-
-#define ASSOCIATOR_NOT_SUPPORTED	0x00
-#define ASSOCIATOR_SUPPORTED	0x1000
-#define ASSOCIATOR_REQUIRED	0x3000
-
-#define	INIT_ACK0_SUPPORT	0x800
-#define INIT_ACKN_SUPPORT	0x400
-
-#define	RECIP_ACK0_SUPPORT	0x8000
-#define RECIP_ACKN_SUPPORT	0x4000
-
-#define X_ID_INTERLOCK		0x2000
-
-#define ERROR_POLICY		0x1800		// Error Policy Supported
-#define ERROR_DISCARD		0x00		// Only Discard Supported
-#define ERROR_DISC_PROCESS	0x02		// Discard and process supported
-
-#define NODE_ID			0x01
-#define IEEE_EXT		0x20
-
-//
-// Categories Supported Per Sequence
-//
-#define	CATEGORIES_PER_SEQUENCE	0x300
-#define ONE_CATEGORY_SEQUENCE	0x00		// 1 Category per Sequence
-#define TWO_CATEGORY_SEQUENCE	0x01		// 2 Categories per Sequence
-#define MANY_CATEGORY_SEQUENCE	0x03		// > 2 Categories/Sequence
-
-typedef struct {
-
-	USHORT initiator_control;
-	USHORT service_options;
-
-	USHORT rx_data_size;
-	USHORT recipient_control;
-
-	USHORT ee_credit;
-	USHORT concurrent_sequences;
-
-	USHORT reserved;
-	USHORT open_sequences;
-
-} CLASS_PARAMETERS;
-
-typedef struct {
-	ULONG	login_cmd;
-	//
-	// Common Service Parameters
-	//
-	struct {
-
-		USHORT bb_credit;
-		UCHAR lowest_ver;
-		UCHAR highest_ver;
-
-		USHORT bb_rx_size;
-		USHORT common_features;
-
-		USHORT rel_offset;
-		USHORT concurrent_seq;
-
-
-		ULONG e_d_tov;
-	} cmn_services;
-
-	//
-	// Port Name
-	//
-	UCHAR port_name[8];
-
-	//
-	// Node/Fabric Name
-	//
-	UCHAR node_name[8];
-
-	//
-	// Class 1, 2 and 3 Service Parameters
-	//
-	CLASS_PARAMETERS	class1;
-	CLASS_PARAMETERS	class2;
-	CLASS_PARAMETERS	class3;
-
-	ULONG reserved[4];
-
-	//
-	// Vendor Version Level
-	//
-	UCHAR		vendor_id[2];
-	UCHAR		vendor_version[6];
-	ULONG		buffer_size;
-	USHORT		rxid_start;
-	USHORT		total_rxids;
-} LOGIN_PAYLOAD;
-
-
-typedef struct
-{
-  ULONG cmd;  // 4 bytes
-  UCHAR n_port_identifier[3];
-  UCHAR reserved;
-  UCHAR port_name[8];
-} LOGOUT_PAYLOAD;
-
-
-//
-//	PRLI Request Service Parameter Defines
-//
-#define PRLI_ACC			0x01
-#define PRLI_REQ			0x02
-#define ORIG_PROCESS_ASSOC_VALID	0x8000
-#define RESP_PROCESS_ASSOC_VALID	0x4000
-#define ESTABLISH_PAIR			0x2000
-#define DATA_OVERLAY_ALLOWED		0x40
-#define	INITIATOR_FUNCTION		0x20
-#define	TARGET_FUNCTION			0x10
-#define CMD_DATA_MIXED			0x08
-#define DATA_RESP_MIXED			0x04
-#define READ_XFER_RDY			0x02
-#define WRITE_XFER_RDY			0x01
-
-#define RESPONSE_CODE_MASK	0xF00
-#define REQUEST_EXECUTED	0x100
-#define NO_RESOURCES		0x200
-#define INIT_NOT_COMPLETE	0x300
-#define IMAGE_DOES_NOT_EXIST	0x400
-#define BAD_PREDEFINED_COND	0x500
-#define REQ_EXEC_COND		0x600
-#define NO_MULTI_PAGE		0x700
-
-typedef struct {
-	USHORT	payload_length;
-	UCHAR	page_length;
-	UCHAR	cmd;
-
-
-	ULONG	valid;
-
-	ULONG	orig_process_associator;
-
-	ULONG	resp_process_associator;
-	
-	ULONG	fcp_info;
-} PRLI_REQUEST;
-
-typedef struct {
-
-	USHORT	payload_length;
-	UCHAR	page_length;
-	UCHAR	cmd;
-
-	ULONG	valid;
-	ULONG	orig_process_associator;
-
-	ULONG	resp_process_associator;
-	ULONG	reserved;
-} PRLO_REQUEST;
-
-typedef struct {
-	ULONG	cmd;
-
-	ULONG	hard_address;
-	
-	UCHAR	port_name[8];
-
-	UCHAR	node_name[8];
-
-	ULONG	s_id;
-} ADISC_PAYLOAD;
-
-struct ext_sg_entry_t {
-	__u32 len:18;		/* buffer length, bits 0-17 */
-	__u32 uba:13;		/* upper bus address bits 18-31 */
-	__u32 lba;		/* lower bus address bits 0-31 */
-}; 
-
-
-// J. McCarty's LINK.H
-//
-//	LS_RJT Reason Codes
-//
-
-#define INVALID_COMMAND_CODE	0x01
-#define LOGICAL_ERROR		0x03
-#define LOGICAL_BUSY		0x05
-#define PROTOCOL_ERROR		0x07
-#define UNABLE_TO_PERFORM	0x09
-#define COMMAND_NOT_SUPPORTED	0x0B
-#define LS_VENDOR_UNIQUE	0xFF
-
-//
-// 	LS_RJT Reason Codes Explanations
-//
-#define NO_REASON		0x00
-#define OPTIONS_ERROR		0x01
-#define INITIATOR_CTL_ERROR	0x03
-#define RECIPIENT_CTL_ERROR	0x05
-#define DATA_FIELD_SIZE_ERROR	0x07
-#define CONCURRENT_SEQ_ERROR	0x09
-#define CREDIT_ERROR		0x0B
-#define INVALID_PORT_NAME	0x0D
-#define INVALID_NODE_NAME	0x0E
-#define INVALID_CSP		0x0F	// Invalid Service Parameters
-#define INVALID_ASSOC_HDR	0x11	// Invalid Association Header
-#define ASSOC_HDR_REQUIRED	0x13	// Association Header Required
-#define LS_INVALID_S_ID		0x15
-#define INVALID_OX_RX_ID	0x17	// Invalid OX_ID RX_ID Combination
-#define CMD_IN_PROCESS		0x19
-#define INVALID_IDENTIFIER	0x1F	// Invalid N_PORT Identifier
-#define INVALID_SEQ_ID		0x21
-#define ABT_INVALID_XCHNG	0x23 	// Attempt to Abort an invalid Exchange
-#define ABT_INACTIVE_XCHNG	0x25 	// Attempt to Abort an inactive Exchange
-#define NEED_REC_QUAL		0x27	// Recovery Qualifier required
-#define NO_LOGIN_RESOURCES	0x29	// No resources to support login
-#define NO_DATA			0x2A	// Unable to supply requested data
-#define	REQUEST_NOT_SUPPORTED	0x2C	// Request Not Supported
-
-//
-//	Link Control Codes
-//
-
-//
-//	P_BSY Action Codes
-//
-#define SEQUENCE_TERMINATED	0x01000000
-#define SEQUENCE_ACTIVE		0x02000000
-
-//
-//	P_BSY Reason Codes
-//
-#define PHYS_NPORT_BUSY		0x010000
-#define NPORT_RESOURCE_BUSY	0x020000
-
-//
-// 	P_RJT, F_RJT Action Codes
-//
-
-#define RETRYABLE_ERROR		0x01000000
-#define NON_RETRYABLE_ERROR	0x02000000
-
-//
-// 	P_RJT, F_RJT Reason Codes
-//
-#define INVALID_D_ID		0x010000
-#define INVALID_S_ID		0x020000
-#define NPORT_NOT_AVAIL_TMP	0x030000
-#define NPORT_NOT_AVAIL_PERM	0x040000
-#define CLASS_NOT_SUPPORTED	0x050000
-#define USAGE_ERROR		0x060000
-#define TYPE_NOT_SUPPORTED	0x070000
-#define INVAL_LINK_CONTROL	0x080000
-#define INVAL_R_CTL		0x090000
-#define INVAL_F_CTL		0x0A0000
-#define INVAL_OX_ID		0x0B0000
-#define INVAL_RX_ID		0x0C0000
-#define INVAL_SEQ_ID		0x0D0000
-#define INVAL_DF_CTL		0x0E0000
-#define INVAL_SEQ_CNT		0x0F0000
-#define INVAL_PARAMS		0x100000
-#define EXCHANGE_ERROR		0x110000
-#define LS_PROTOCOL_ERROR	0x120000
-#define INCORRECT_LENGTH	0x130000
-#define UNEXPECTED_ACK		0x140000
-#define LOGIN_REQ		0x160000
-#define EXCESSIVE_SEQ		0x170000
-#define NO_EXCHANGE		0x180000
-#define SEC_HDR_NOT_SUPPORTED	0x190000
-#define NO_FABRIC		0x1A0000
-#define P_VENDOR_UNIQUE		0xFF0000
-
-//
-// 	BA_RJT Reason Codes
-//
-#define BA_INVALID_COMMAND	0x00010000
-#define BA_LOGICAL_ERROR	0x00030000
-#define BA_LOGICAL_BUSY		0x00050000
-#define BA_PROTOCOL_ERROR	0x00070000
-#define BA_UNABLE_TO_PERFORM	0x00090000
-
-//
-// 	BA_RJT Reason Explanation Codes
-//
-#define BA_NO_REASON		0x00000000
-#define BA_INVALID_OX_RX	0x00000300
-#define BA_SEQUENCE_ABORTED	0x00000500
-
-
-
-#endif /* CPQFCTSSTRUCTS_H	*/
-