Drivers: scsi: remove __dev* attributes.

CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Adam Radford <linuxraid@lsi.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 25 insertions, 26 deletions

diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 13aeca3d51f2..865c64fa923c 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -489,7 +489,7 @@ struct ParameterData {
 	int def;		/* default value */
 	int safe;		/* safe value */
 };
-static struct ParameterData __devinitdata cfg_data[] = {
+static struct ParameterData cfg_data[] = {
 	{ /* adapter id */
 		CFG_PARAM_UNSET,
 		0,
@@ -574,7 +574,7 @@ MODULE_PARM_DESC(reset_delay, "Reset delay in seconds. Default 1 (0-180)");
  * set_safe_settings - if the use_safe_settings option is set then
  * set all values to the safe and slow values.
  **/
-static void __devinit set_safe_settings(void)
+static void set_safe_settings(void)
 {
 	if (use_safe_settings)
 	{
@@ -593,7 +593,7 @@ static void __devinit set_safe_settings(void)
  * fix_settings - reset any boot parameters which are out of range
  * back to the default values.
  **/
-static void __devinit fix_settings(void)
+static void fix_settings(void)
 {
 	int i;
 
@@ -620,7 +620,7 @@ static void __devinit fix_settings(void)
  * Mapping from the eeprom delay index value (index into this array)
  * to the number of actual seconds that the delay should be for.
  */
-static char __devinitdata eeprom_index_to_delay_map[] = 
+static char eeprom_index_to_delay_map[] =
 	{ 1, 3, 5, 10, 16, 30, 60, 120 };
 
 
@@ -630,7 +630,7 @@ static char __devinitdata eeprom_index_to_delay_map[] =
  *
  * @eeprom: The eeprom structure in which we find the delay index to map.
  **/
-static void __devinit eeprom_index_to_delay(struct NvRamType *eeprom)
+static void eeprom_index_to_delay(struct NvRamType *eeprom)
 {
 	eeprom->delay_time = eeprom_index_to_delay_map[eeprom->delay_time];
 }
@@ -643,7 +643,7 @@ static void __devinit eeprom_index_to_delay(struct NvRamType *eeprom)
  *
  * @delay: The delay, in seconds, to find the eeprom index for.
  **/
-static int __devinit delay_to_eeprom_index(int delay)
+static int delay_to_eeprom_index(int delay)
 {
 	u8 idx = 0;
 	while (idx < 7 && eeprom_index_to_delay_map[idx] < delay)
@@ -659,7 +659,7 @@ static int __devinit delay_to_eeprom_index(int delay)
  *
  * @eeprom: The eeprom data to override with command line options.
  **/
-static void __devinit eeprom_override(struct NvRamType *eeprom)
+static void eeprom_override(struct NvRamType *eeprom)
 {
 	u8 id;
 
@@ -3938,7 +3938,7 @@ static void dc395x_slave_destroy(struct scsi_device *scsi_device)
  *
  * @io_port: base I/O address
  **/
-static void __devinit trms1040_wait_30us(unsigned long io_port)
+static void trms1040_wait_30us(unsigned long io_port)
 {
 	/* ScsiPortStallExecution(30); wait 30 us */
 	outb(5, io_port + TRM_S1040_GEN_TIMER);
@@ -3955,7 +3955,7 @@ static void __devinit trms1040_wait_30us(unsigned long io_port)
  * @cmd:	SB + op code (command) to send
  * @addr:	address to send
  **/
-static void __devinit trms1040_write_cmd(unsigned long io_port, u8 cmd, u8 addr)
+static void trms1040_write_cmd(unsigned long io_port, u8 cmd, u8 addr)
 {
 	int i;
 	u8 send_data;
@@ -4000,7 +4000,7 @@ static void __devinit trms1040_write_cmd(unsigned long io_port, u8 cmd, u8 addr)
  * @addr:	offset into EEPROM
  * @byte:	bytes to write
  **/
-static void __devinit trms1040_set_data(unsigned long io_port, u8 addr, u8 byte)
+static void trms1040_set_data(unsigned long io_port, u8 addr, u8 byte)
 {
 	int i;
 	u8 send_data;
@@ -4054,7 +4054,7 @@ static void __devinit trms1040_set_data(unsigned long io_port, u8 addr, u8 byte)
  * @eeprom:	the data to write
  * @io_port:	the base io port
  **/
-static void __devinit trms1040_write_all(struct NvRamType *eeprom, unsigned long io_port)
+static void trms1040_write_all(struct NvRamType *eeprom, unsigned long io_port)
 {
 	u8 *b_eeprom = (u8 *)eeprom;
 	u8 addr;
@@ -4094,7 +4094,7 @@ static void __devinit trms1040_write_all(struct NvRamType *eeprom, unsigned long
  *
  * Returns the byte read.
  **/
-static u8 __devinit trms1040_get_data(unsigned long io_port, u8 addr)
+static u8 trms1040_get_data(unsigned long io_port, u8 addr)
 {
 	int i;
 	u8 read_byte;
@@ -4132,7 +4132,7 @@ static u8 __devinit trms1040_get_data(unsigned long io_port, u8 addr)
  * @eeprom:	where to store the data
  * @io_port:	the base io port
  **/
-static void __devinit trms1040_read_all(struct NvRamType *eeprom, unsigned long io_port)
+static void trms1040_read_all(struct NvRamType *eeprom, unsigned long io_port)
 {
 	u8 *b_eeprom = (u8 *)eeprom;
 	u8 addr;
@@ -4162,7 +4162,7 @@ static void __devinit trms1040_read_all(struct NvRamType *eeprom, unsigned long
  * @eeprom:	caller allocated strcuture to read the eeprom data into
  * @io_port:	io port to read from
  **/
-static void __devinit check_eeprom(struct NvRamType *eeprom, unsigned long io_port)
+static void check_eeprom(struct NvRamType *eeprom, unsigned long io_port)
 {
 	u16 *w_eeprom = (u16 *)eeprom;
 	u16 w_addr;
@@ -4232,7 +4232,7 @@ static void __devinit check_eeprom(struct NvRamType *eeprom, unsigned long io_po
  *
  * @eeprom: The eeprom data strucutre to show details for.
  **/
-static void __devinit print_eeprom_settings(struct NvRamType *eeprom)
+static void print_eeprom_settings(struct NvRamType *eeprom)
 {
 	dprintkl(KERN_INFO, "Used settings: AdapterID=%02i, Speed=%i(%02i.%01iMHz), dev_mode=0x%02x\n",
 		eeprom->scsi_id,
@@ -4260,7 +4260,7 @@ static void adapter_sg_tables_free(struct AdapterCtlBlk *acb)
 /*
  * Allocate SG tables; as we have to pci_map them, an SG list (struct SGentry*)
  * should never cross a page boundary */
-static int __devinit adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
+static int adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
 {
 	const unsigned mem_needed = (DC395x_MAX_SRB_CNT+1)
 	                            *SEGMENTX_LEN;
@@ -4306,7 +4306,7 @@ static int __devinit adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
  *
  * @acb: The adapter to print the information for.
  **/
-static void __devinit adapter_print_config(struct AdapterCtlBlk *acb)
+static void adapter_print_config(struct AdapterCtlBlk *acb)
 {
 	u8 bval;
 
@@ -4350,7 +4350,7 @@ static void __devinit adapter_print_config(struct AdapterCtlBlk *acb)
  *
  * @acb: The adapter to initialize.
  **/
-static void __devinit adapter_init_params(struct AdapterCtlBlk *acb)
+static void adapter_init_params(struct AdapterCtlBlk *acb)
 {
 	struct NvRamType *eeprom = &acb->eeprom;
 	int i;
@@ -4412,7 +4412,7 @@ static void __devinit adapter_init_params(struct AdapterCtlBlk *acb)
  *
  * @host: The scsi host instance to fill in the values for.
  **/
-static void __devinit adapter_init_scsi_host(struct Scsi_Host *host)
+static void adapter_init_scsi_host(struct Scsi_Host *host)
 {
         struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)host->hostdata;
 	struct NvRamType *eeprom = &acb->eeprom;
@@ -4453,7 +4453,7 @@ static void __devinit adapter_init_scsi_host(struct Scsi_Host *host)
  *
  * @acb: The adapter which we are to init.
  **/
-static void __devinit adapter_init_chip(struct AdapterCtlBlk *acb)
+static void adapter_init_chip(struct AdapterCtlBlk *acb)
 {
         struct NvRamType *eeprom = &acb->eeprom;
         
@@ -4506,8 +4506,8 @@ static void __devinit adapter_init_chip(struct AdapterCtlBlk *acb)
  * Returns 0 if the initialization succeeds, any other value on
  * failure.
  **/
-static int __devinit adapter_init(struct AdapterCtlBlk *acb,
-	unsigned long io_port, u32 io_port_len, unsigned int irq)
+static int adapter_init(struct AdapterCtlBlk *acb, unsigned long io_port,
+			u32 io_port_len, unsigned int irq)
 {
 	if (!request_region(io_port, io_port_len, DC395X_NAME)) {
 		dprintkl(KERN_ERR, "Failed to reserve IO region 0x%lx\n", io_port);
@@ -4794,8 +4794,7 @@ static void banner_display(void)
  *
  * Returns 0 on success, or an error code (-ve) on failure.
  **/
-static int __devinit dc395x_init_one(struct pci_dev *dev,
-		const struct pci_device_id *id)
+static int dc395x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	struct Scsi_Host *scsi_host = NULL;
 	struct AdapterCtlBlk *acb = NULL;
@@ -4861,7 +4860,7 @@ fail:
  *
  * @dev: The PCI device to initialize.
  **/
-static void __devexit dc395x_remove_one(struct pci_dev *dev)
+static void dc395x_remove_one(struct pci_dev *dev)
 {
 	struct Scsi_Host *scsi_host = pci_get_drvdata(dev);
 	struct AdapterCtlBlk *acb = (struct AdapterCtlBlk *)(scsi_host->hostdata);
@@ -4892,7 +4891,7 @@ static struct pci_driver dc395x_driver = {
 	.name           = DC395X_NAME,
 	.id_table       = dc395x_pci_table,
 	.probe          = dc395x_init_one,
-	.remove         = __devexit_p(dc395x_remove_one),
+	.remove         = dc395x_remove_one,
 };