summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/hisi_sas
diff options
context:
space:
mode:
authorXiang Chen <chenxiang66@hisilicon.com>2020-10-02 16:30:37 +0200
committerMartin K. Petersen <martin.petersen@oracle.com>2020-10-07 02:47:06 +0200
commitb14a37e011d829404c29a5ae17849d7efb034893 (patch)
tree276b690bbaaa51f16b8a17e78b67712446a902b8 /drivers/scsi/hisi_sas
parentscsi: hisi_sas: Add device link between SCSI devices and hisi_hba (diff)
downloadlinux-b14a37e011d829404c29a5ae17849d7efb034893.tar.xz
linux-b14a37e011d829404c29a5ae17849d7efb034893.zip
scsi: hisi_sas: Filter out new PHY up events during suspend
Currently sas_resume_ha() is called while resuming the controller to wait for all suspended PHYs to come up and all the libsas events to be completed. There is a scenario which will cause task hung: For direct attach with two disks connected with two PHYs, disable phy0 before suspending the disk on phy1 and the controller, then enable phy0 and resume the controller, and task hung occurs as follows: [ 591.901463] hisi_sas_v3_hw 0000:b4:02.0: resuming from operating state [D0] [ 593.113525] hisi_sas_v3_hw 0000:b4:02.0: neither _PS0 nor _PR0 is defined [ 593.120301] hisi_sas_v3_hw 0000:b4:02.0: waiting up to 25 seconds for 1 phy to resume [ 593.120836] hisi_sas_v3_hw 0000:b4:02.0: phyup: phy0 link_rate=10(sata) [ 593.134680] hisi_sas_v3_hw 0000:b4:02.0: phyup: phy1 link_rate=10(sata) [ 593.134733] sas: phy-2:0 added to port-2:0, phy_mask:0x1 (5000000000000200) [ 593.148350] sas: DOING DISCOVERY on port 0, pid:948 [ 593.153227] hisi_sas_v3_hw 0000:b4:02.0: dev[3:5] found [ 593.159840] sas: Enter sas_scsi_recover_host busy: 0 failed: 0 [ 593.165663] sas: ata7: end_device-2:0: dev error handler [ 593.165730] sas: ata2: end_device-2:1: dev error handler [ 593.172532] hisi_sas_v3_hw 0000:b4:02.0: phydown: phy0 phy_state=0x2 [ 593.182570] hisi_sas_v3_hw 0000:b4:02.0: ignore flutter phy0 down [ 593.331277] hisi_sas_v3_hw 0000:b4:02.0: phyup: phy0 link_rate=10(sata) [ 593.498956] ata7.00: ATA-11: SAMSUNG MZ7LH960HAJR-00005, HXT7404Q, max UDMA/133 [ 593.506235] ata7.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 32) [ 593.514295] ata7.00: configured for UDMA/133 [ 593.518557] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1 [ 593.528613] sas: ata7: end_device-2:0: model:SAMSUNG MZ7LH960HAJR-00005 serial:S45NNA0M712225 [ 593.537520] device_link_add 316: dev=2:0:2:0 supplier:2 consumer:0 [ 593.543674] device_link_add 324 [ 593.546801] device_link_add 352 [ 593.549930] device_link_add 406 [ 593.553058] device_link_add 440: dev=2:0:2:0 supplier:2 consumer:0 [ 593.559208] device_link_add 444 [ 593.562335] device_link_add 455 [ 593.565517] scsi 2:0:2:0: Direct-Access ATA SAMSUNG MZ7LH960 404Q PQ: 0 ANSI: 5 [ 620.057464] phy-2:1: resume timeout [ 738.841445] INFO: task kworker/u256:0:8 blocked for more than 120 seconds. [ 738.848295] Not tainted 5.8.0-rc1-76154-g0d52b59-dirty #744 [ 738.854361] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 738.862155] kworker/u256:0 D 0 8 2 0x00000028 [ 738.867626] Workqueue: 0000:b4:02.0_event_q sas_port_event_worker [ 738.873693] Call trace: [ 738.876133] __switch_to+0xf4/0x148 [ 738.879613] __schedule+0x270/0x5d8 [ 738.883091] schedule+0x78/0x110 [ 738.886307] schedule_timeout+0x1ac/0x280 [ 738.890299] wait_for_completion+0x94/0x138 [ 738.894472] flush_workqueue+0x114/0x438 [ 738.898377] sas_porte_bytes_dmaed+0x400/0x500 [ 738.902801] sas_port_event_worker+0x28/0x40 [ 738.907053] process_one_work+0x1e8/0x360 [ 738.911046] worker_thread+0x44/0x478 [ 738.914698] kthread+0x150/0x158 [ 738.917915] ret_from_fork+0x10/0x1c [ 738.921534] INFO: task kworker/u256:1:948 blocked for more than 120 seconds. [ 738.928550] Not tainted 5.8.0-rc1-76154-g0d52b59-dirty #744 [ 738.934614] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 738.942408] kworker/u256:1 D 0 948 2 0x00000028 [ 738.947873] Workqueue: 0000:b4:02.0_disco_q sas_discover_domain [ 738.953766] Call trace: [ 738.956203] __switch_to+0xf4/0x148 [ 738.959678] __schedule+0x270/0x5d8 [ 738.963152] schedule+0x78/0x110 [ 738.966368] rpm_resume+0xcc/0x550 [ 738.969757] __pm_runtime_resume+0x3c/0x88 [ 738.973836] rpm_get_suppliers+0x50/0x148 [ 738.977829] __pm_runtime_set_status+0x124/0x2f0 [ 738.982427] scsi_sysfs_add_sdev+0x1a0/0x2a8 [ 738.986679] scsi_probe_and_add_lun+0x888/0xab0 [ 738.991190] __scsi_scan_target+0xec/0x520 [ 738.995268] scsi_scan_target+0x11c/0x128 [ 738.999261] sas_rphy_add+0x15c/0x1e8 [ 739.002907] sas_probe_devices+0xe4/0x150 [ 739.006899] sas_discover_domain+0x33c/0x588 [ 739.011150] process_one_work+0x1e8/0x360 [ 739.015143] worker_thread+0x44/0x478 [ 739.018789] kthread+0x150/0x158 [ 739.022003] ret_from_fork+0x10/0x1c ... If an extra phy0 up happens during resume of the SAS controller, it will emit a new libsas event (event PORTE_BYTES_DMAED and event DISCE_DISCOVER_DOMAIN). We will call function scsi_sysfs_add_sdev() in event DISCE_DISCOVER_DOMAIN, which will call __pm_runtime_set_status() to resume supplier (host controller). For runtime PM core, if device is in the resuming state, the later resume request of the device will wait for previous resume request to complete synchronously. At that point in time the state of the controller is still resuming as it waits for all libsas events to be completed, while libsas event DISCE_DISCOVER_DOMAIN is blocked as the state of the controller is resuming which causes a deadlock. To avoid the issue, filter out new PHY up events while the controller is suspended. Link: https://lore.kernel.org/r/1601649038-25534-7-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers/scsi/hisi_sas')
-rw-r--r--drivers/scsi/hisi_sas/hisi_sas_main.c6
1 files changed, 6 insertions, 0 deletions
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index f18452942508..ef3922ad70c0 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -619,6 +619,12 @@ static void hisi_sas_bytes_dmaed(struct hisi_hba *hisi_hba, int phy_no)
if (!phy->phy_attached)
return;
+ if (test_bit(HISI_SAS_PM_BIT, &hisi_hba->flags) &&
+ !sas_phy->suspended) {
+ dev_warn(hisi_hba->dev, "phy%d during suspend filtered out\n", phy_no);
+ return;
+ }
+
sas_ha = &hisi_hba->sha;
sas_ha->notify_phy_event(sas_phy, PHYE_OOB_DONE);