isci: uplevel phy infrastructure

Merge core/scic_sds_phy.[ch] into phy.[ch]

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

1 files changed, 573 insertions, 1 deletions

diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h
index 3a95adbb508c..093fd473366c 100644
--- a/drivers/scsi/isci/phy.h
+++ b/drivers/scsi/isci/phy.h
@@ -57,7 +57,105 @@
 
 #include <scsi/sas.h>
 #include <scsi/libsas.h>
-#include "scic_sds_phy.h"
+#include "state_machine.h"
+
+/* This is the timeout value for the SATA phy to wait for a SIGNATURE FIS
+ * before restarting the starting state machine.  Technically, the old parallel
+ * ATA specification required up to 30 seconds for a device to issue its
+ * signature FIS as a result of a soft reset.  Now we see that devices respond
+ * generally within 15 seconds, but we'll use 25 for now.
+ */
+#define SCIC_SDS_SIGNATURE_FIS_TIMEOUT    25000
+
+/* This is the timeout for the SATA OOB/SN because the hardware does not
+ * recognize a hot plug after OOB signal but before the SN signals.  We need to
+ * make sure after a hotplug timeout if we have not received the speed event
+ * notification from the hardware that we restart the hardware OOB state
+ * machine.
+ */
+#define SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT  250
+
+enum scic_sds_phy_protocol {
+	SCIC_SDS_PHY_PROTOCOL_UNKNOWN,
+	SCIC_SDS_PHY_PROTOCOL_SAS,
+	SCIC_SDS_PHY_PROTOCOL_SATA,
+	SCIC_SDS_MAX_PHY_PROTOCOLS
+};
+
+/**
+ * struct scic_sds_phy - This structure  contains or references all of the data
+ *    necessary to represent the core phy object and SCU harware protocol
+ *    engine.
+ *
+ *
+ */
+struct scic_sds_phy {
+	/**
+	 * This field contains the information for the base phy state machine.
+	 */
+	struct sci_base_state_machine state_machine;
+
+	/**
+	 * This field specifies the port object that owns/contains this phy.
+	 */
+	struct scic_sds_port *owning_port;
+
+	/**
+	 * This field indicates whether the phy supports 1.5 Gb/s, 3.0 Gb/s,
+	 * or 6.0 Gb/s operation.
+	 */
+	enum sas_linkrate max_negotiated_speed;
+
+	/**
+	 * This member specifies the protocol being utilized on this phy.  This
+	 * field contains a legitamite value once the PHY has link trained with
+	 * a remote phy.
+	 */
+	enum scic_sds_phy_protocol protocol;
+
+	/**
+	 * This field specifies the index with which this phy is associated (0-3).
+	 */
+	u8 phy_index;
+
+	/**
+	 * This member indicates if this particular PHY has received a BCN while
+	 * it had no port assignement.  This BCN will be reported once the phy is
+	 * assigned to a port.
+	 */
+	bool bcn_received_while_port_unassigned;
+
+	/**
+	 * This field indicates if this PHY is currently in the process of
+	 * link training (i.e. it has started OOB, but has yet to perform
+	 * IAF exchange/Signature FIS reception).
+	 */
+	bool is_in_link_training;
+
+	/**
+	 * This field contains a reference to the timer utilized in detecting
+	 * when a signature FIS timeout has occurred.  The signature FIS is the
+	 * first FIS sent by an attached SATA device after OOB/SN.
+	 */
+	void *sata_timeout_timer;
+
+	const struct scic_sds_phy_state_handler *state_handlers;
+
+	struct sci_base_state_machine starting_substate_machine;
+
+	/**
+	 * This field is the pointer to the transport layer register for the SCU
+	 * hardware.
+	 */
+	struct scu_transport_layer_registers __iomem *transport_layer_registers;
+
+	/**
+	 * This field points to the link layer register set within the SCU.
+	 */
+	struct scu_link_layer_registers __iomem *link_layer_registers;
+
+};
+
 
 struct isci_phy {
 	struct scic_sds_phy sci;
@@ -85,6 +183,480 @@ static inline struct isci_phy *sci_phy_to_iphy(struct scic_sds_phy *sci_phy)
 	return iphy;
 }
 
+struct scic_phy_cap {
+	union {
+		struct {
+			/*
+			 * The SAS specification indicates the start bit shall
+			 * always be set to
+			 * 1.  This implementation will have the start bit set
+			 * to 0 if the PHY CAPABILITIES were either not
+			 * received or speed negotiation failed.
+			 */
+			u8 start:1;
+			u8 tx_ssc_type:1;
+			u8 res1:2;
+			u8 req_logical_linkrate:4;
+
+			u32 gen1_no_ssc:1;
+			u32 gen1_ssc:1;
+			u32 gen2_no_ssc:1;
+			u32 gen2_ssc:1;
+			u32 gen3_no_ssc:1;
+			u32 gen3_ssc:1;
+			u32 res2:17;
+			u32 parity:1;
+		};
+		u32 all;
+	};
+}  __packed;
+
+/* this data structure reflects the link layer transmit identification reg */
+struct scic_phy_proto {
+	union {
+		struct {
+			u16 _r_a:1;
+			u16 smp_iport:1;
+			u16 stp_iport:1;
+			u16 ssp_iport:1;
+			u16 _r_b:4;
+			u16 _r_c:1;
+			u16 smp_tport:1;
+			u16 stp_tport:1;
+			u16 ssp_tport:1;
+			u16 _r_d:4;
+		};
+		u16 all;
+	};
+} __packed;
+
+
+/**
+ * struct scic_phy_properties - This structure defines the properties common to
+ *    all phys that can be retrieved.
+ *
+ *
+ */
+struct scic_phy_properties {
+	/**
+	 * This field specifies the port that currently contains the
+	 * supplied phy.  This field may be set to NULL
+	 * if the phy is not currently contained in a port.
+	 */
+	struct scic_sds_port *owning_port;
+
+	/**
+	 * This field specifies the link rate at which the phy is
+	 * currently operating.
+	 */
+	enum sas_linkrate negotiated_link_rate;
+
+	/**
+	 * This field specifies the index of the phy in relation to other
+	 * phys within the controller.  This index is zero relative.
+	 */
+	u8 index;
+};
+
+/**
+ * struct scic_sas_phy_properties - This structure defines the properties,
+ *    specific to a SAS phy, that can be retrieved.
+ *
+ *
+ */
+struct scic_sas_phy_properties {
+	/**
+	 * This field delineates the Identify Address Frame received
+	 * from the remote end point.
+	 */
+	struct sas_identify_frame rcvd_iaf;
+
+	/**
+	 * This field delineates the Phy capabilities structure received
+	 * from the remote end point.
+	 */
+	struct scic_phy_cap rcvd_cap;
+
+};
+
+/**
+ * struct scic_sata_phy_properties - This structure defines the properties,
+ *    specific to a SATA phy, that can be retrieved.
+ *
+ *
+ */
+struct scic_sata_phy_properties {
+	/**
+	 * This field delineates the signature FIS received from the
+	 * attached target.
+	 */
+	struct dev_to_host_fis signature_fis;
+
+	/**
+	 * This field specifies to the user if a port selector is connected
+	 * on the specified phy.
+	 */
+	bool is_port_selector_present;
+
+};
+
+/**
+ * enum scic_phy_counter_id - This enumeration depicts the various pieces of
+ *    optional information that can be retrieved for a specific phy.
+ *
+ *
+ */
+enum scic_phy_counter_id {
+	/**
+	 * This PHY information field tracks the number of frames received.
+	 */
+	SCIC_PHY_COUNTER_RECEIVED_FRAME,
+
+	/**
+	 * This PHY information field tracks the number of frames transmitted.
+	 */
+	SCIC_PHY_COUNTER_TRANSMITTED_FRAME,
+
+	/**
+	 * This PHY information field tracks the number of DWORDs received.
+	 */
+	SCIC_PHY_COUNTER_RECEIVED_FRAME_WORD,
+
+	/**
+	 * This PHY information field tracks the number of DWORDs transmitted.
+	 */
+	SCIC_PHY_COUNTER_TRANSMITTED_FRAME_DWORD,
+
+	/**
+	 * This PHY information field tracks the number of times DWORD
+	 * synchronization was lost.
+	 */
+	SCIC_PHY_COUNTER_LOSS_OF_SYNC_ERROR,
+
+	/**
+	 * This PHY information field tracks the number of received DWORDs with
+	 * running disparity errors.
+	 */
+	SCIC_PHY_COUNTER_RECEIVED_DISPARITY_ERROR,
+
+	/**
+	 * This PHY information field tracks the number of received frames with a
+	 * CRC error (not including short or truncated frames).
+	 */
+	SCIC_PHY_COUNTER_RECEIVED_FRAME_CRC_ERROR,
+
+	/**
+	 * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT)
+	 * primitives received.
+	 */
+	SCIC_PHY_COUNTER_RECEIVED_DONE_ACK_NAK_TIMEOUT,
+
+	/**
+	 * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT)
+	 * primitives transmitted.
+	 */
+	SCIC_PHY_COUNTER_TRANSMITTED_DONE_ACK_NAK_TIMEOUT,
+
+	/**
+	 * This PHY information field tracks the number of times the inactivity
+	 * timer for connections on the phy has been utilized.
+	 */
+	SCIC_PHY_COUNTER_INACTIVITY_TIMER_EXPIRED,
+
+	/**
+	 * This PHY information field tracks the number of DONE (CREDIT TIMEOUT)
+	 * primitives received.
+	 */
+	SCIC_PHY_COUNTER_RECEIVED_DONE_CREDIT_TIMEOUT,
+
+	/**
+	 * This PHY information field tracks the number of DONE (CREDIT TIMEOUT)
+	 * primitives transmitted.
+	 */
+	SCIC_PHY_COUNTER_TRANSMITTED_DONE_CREDIT_TIMEOUT,
+
+	/**
+	 * This PHY information field tracks the number of CREDIT BLOCKED
+	 * primitives received.
+	 * @note Depending on remote device implementation, credit blocks
+	 *       may occur regularly.
+	 */
+	SCIC_PHY_COUNTER_RECEIVED_CREDIT_BLOCKED,
+
+	/**
+	 * This PHY information field contains the number of short frames
+	 * received.  A short frame is simply a frame smaller then what is
+	 * allowed by either the SAS or SATA specification.
+	 */
+	SCIC_PHY_COUNTER_RECEIVED_SHORT_FRAME,
+
+	/**
+	 * This PHY information field contains the number of frames received after
+	 * credit has been exhausted.
+	 */
+	SCIC_PHY_COUNTER_RECEIVED_FRAME_WITHOUT_CREDIT,
+
+	/**
+	 * This PHY information field contains the number of frames received after
+	 * a DONE has been received.
+	 */
+	SCIC_PHY_COUNTER_RECEIVED_FRAME_AFTER_DONE,
+
+	/**
+	 * This PHY information field contains the number of times the phy
+	 * failed to achieve DWORD synchronization during speed negotiation.
+	 */
+	SCIC_PHY_COUNTER_SN_DWORD_SYNC_ERROR
+};
+
+enum scic_sds_phy_states {
+	/**
+	 * Simply the initial state for the base domain state machine.
+	 */
+	SCI_BASE_PHY_STATE_INITIAL,
+
+	/**
+	 * This state indicates that the phy has successfully been stopped.
+	 * In this state no new IO operations are permitted on this phy.
+	 * This state is entered from the INITIAL state.
+	 * This state is entered from the STARTING state.
+	 * This state is entered from the READY state.
+	 * This state is entered from the RESETTING state.
+	 */
+	SCI_BASE_PHY_STATE_STOPPED,
+
+	/**
+	 * This state indicates that the phy is in the process of becomming
+	 * ready.  In this state no new IO operations are permitted on this phy.
+	 * This state is entered from the STOPPED state.
+	 * This state is entered from the READY state.
+	 * This state is entered from the RESETTING state.
+	 */
+	SCI_BASE_PHY_STATE_STARTING,
+
+	/**
+	 * This state indicates the the phy is now ready.  Thus, the user
+	 * is able to perform IO operations utilizing this phy as long as it
+	 * is currently part of a valid port.
+	 * This state is entered from the STARTING state.
+	 */
+	SCI_BASE_PHY_STATE_READY,
+
+	/**
+	 * This state indicates that the phy is in the process of being reset.
+	 * In this state no new IO operations are permitted on this phy.
+	 * This state is entered from the READY state.
+	 */
+	SCI_BASE_PHY_STATE_RESETTING,
+
+	/**
+	 * Simply the final state for the base phy state machine.
+	 */
+	SCI_BASE_PHY_STATE_FINAL,
+};
+
+
+/**
+ * enum scic_sds_phy_starting_substates -
+ *
+ *
+ */
+enum scic_sds_phy_starting_substates {
+	/**
+	 * Initial state
+	 */
+	SCIC_SDS_PHY_STARTING_SUBSTATE_INITIAL,
+
+	/**
+	 * Wait state for the hardware OSSP event type notification
+	 */
+	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_OSSP_EN,
+
+	/**
+	 * Wait state for the PHY speed notification
+	 */
+	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_SPEED_EN,
+
+	/**
+	 * Wait state for the IAF Unsolicited frame notification
+	 */
+	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_IAF_UF,
+
+	/**
+	 * Wait state for the request to consume power
+	 */
+	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SAS_POWER,
+
+	/**
+	 * Wait state for request to consume power
+	 */
+	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_POWER,
+
+	/**
+	 * Wait state for the SATA PHY notification
+	 */
+	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_PHY_EN,
+
+	/**
+	 * Wait for the SATA PHY speed notification
+	 */
+	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SATA_SPEED_EN,
+
+	/**
+	 * Wait state for the SIGNATURE FIS unsolicited frame notification
+	 */
+	SCIC_SDS_PHY_STARTING_SUBSTATE_AWAIT_SIG_FIS_UF,
+
+	/**
+	 * Exit state for this state machine
+	 */
+	SCIC_SDS_PHY_STARTING_SUBSTATE_FINAL,
+};
+
+
+
+typedef enum sci_status (*scic_sds_phy_handler_t)(struct scic_sds_phy *);
+typedef enum sci_status (*scic_sds_phy_event_handler_t)(struct scic_sds_phy *, u32);
+typedef enum sci_status (*scic_sds_phy_frame_handler_t)(struct scic_sds_phy *, u32);
+typedef enum sci_status (*scic_sds_phy_power_handler_t)(struct scic_sds_phy *);
+
+struct scic_sds_phy_state_handler {
+	/**
+	 * The start_handler specifies the method invoked when there is an
+	 * attempt to start a phy.
+	 */
+	scic_sds_phy_handler_t start_handler;
+
+	/**
+	 * The stop_handler specifies the method invoked when there is an
+	 * attempt to stop a phy.
+	 */
+	scic_sds_phy_handler_t stop_handler;
+
+	/**
+	 * The reset_handler specifies the method invoked when there is an
+	 * attempt to reset a phy.
+	 */
+	scic_sds_phy_handler_t reset_handler;
+
+	/**
+	 * The destruct_handler specifies the method invoked when attempting to
+	 * destruct a phy.
+	 */
+	scic_sds_phy_handler_t destruct_handler;
+
+	/**
+	 * The state handler for unsolicited frames received from the SCU hardware.
+	 */
+	scic_sds_phy_frame_handler_t frame_handler;
+
+	/**
+	 * The state handler for events received from the SCU hardware.
+	 */
+	scic_sds_phy_event_handler_t event_handler;
+
+	/**
+	 * The state handler for staggered spinup.
+	 */
+	scic_sds_phy_power_handler_t consume_power_handler;
+
+};
+
+/**
+ * scic_sds_phy_get_index() -
+ *
+ * This macro returns the phy index for the specified phy
+ */
+#define scic_sds_phy_get_index(phy) \
+	((phy)->phy_index)
+
+/**
+ * scic_sds_phy_get_controller() - This macro returns the controller for this
+ *    phy
+ *
+ *
+ */
+#define scic_sds_phy_get_controller(phy) \
+	(scic_sds_port_get_controller((phy)->owning_port))
+
+/**
+ * scic_sds_phy_set_state_handlers() - This macro sets the state handlers for
+ *    this phy object
+ *
+ *
+ */
+#define scic_sds_phy_set_state_handlers(phy, handlers) \
+	((phy)->state_handlers = (handlers))
+
+/**
+ * scic_sds_phy_set_base_state_handlers() -
+ *
+ * This macro set the base state handlers for the phy object.
+ */
+#define scic_sds_phy_set_base_state_handlers(phy, state_id) \
+	scic_sds_phy_set_state_handlers(\
+		(phy), \
+		&scic_sds_phy_state_handler_table[(state_id)] \
+		)
+
+void scic_sds_phy_construct(
+	struct scic_sds_phy *this_phy,
+	struct scic_sds_port *owning_port,
+	u8 phy_index);
+
+struct scic_sds_port *scic_sds_phy_get_port(
+	struct scic_sds_phy *this_phy);
+
+void scic_sds_phy_set_port(
+	struct scic_sds_phy *this_phy,
+	struct scic_sds_port *owning_port);
+
+enum sci_status scic_sds_phy_initialize(
+	struct scic_sds_phy *this_phy,
+	struct scu_transport_layer_registers __iomem *transport_layer_registers,
+	struct scu_link_layer_registers __iomem *link_layer_registers);
+
+enum sci_status scic_sds_phy_start(
+	struct scic_sds_phy *this_phy);
+
+enum sci_status scic_sds_phy_stop(
+	struct scic_sds_phy *this_phy);
+
+enum sci_status scic_sds_phy_reset(
+	struct scic_sds_phy *this_phy);
+
+void scic_sds_phy_resume(
+	struct scic_sds_phy *this_phy);
+
+void scic_sds_phy_setup_transport(
+	struct scic_sds_phy *this_phy,
+	u32 device_id);
+
+enum sci_status scic_sds_phy_event_handler(
+	struct scic_sds_phy *this_phy,
+	u32 event_code);
+
+enum sci_status scic_sds_phy_frame_handler(
+	struct scic_sds_phy *this_phy,
+	u32 frame_index);
+
+enum sci_status scic_sds_phy_consume_power_handler(
+	struct scic_sds_phy *this_phy);
+
+void scic_sds_phy_get_sas_address(
+	struct scic_sds_phy *this_phy,
+	struct sci_sas_address *sas_address);
+
+void scic_sds_phy_get_attached_sas_address(
+	struct scic_sds_phy *this_phy,
+	struct sci_sas_address *sas_address);
+
+struct scic_phy_proto;
+void scic_sds_phy_get_protocols(
+	struct scic_sds_phy *sci_phy,
+	struct scic_phy_proto *protocols);
+enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy);
+
 struct isci_host;
 void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index);
 int isci_phy_control(struct asd_sas_phy *phy, enum phy_func func, void *buf);