[SCSI] lpfc 8.3.5: Add AER support

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

1 files changed, 177 insertions, 0 deletions

diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index e058f1018ff2..82005b8ad957 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -23,6 +23,7 @@
 #include <linux/delay.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
+#include <linux/aer.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_device.h>
@@ -2766,6 +2767,179 @@ static DEVICE_ATTR(lpfc_link_speed, S_IRUGO | S_IWUSR,
 		lpfc_link_speed_show, lpfc_link_speed_store);
 
 /*
+# lpfc_aer_support: Support PCIe device Advanced Error Reporting (AER)
+#       0  = aer disabled or not supported
+#       1  = aer supported and enabled (default)
+# Value range is [0,1]. Default value is 1.
+*/
+
+/**
+ * lpfc_aer_support_store - Set the adapter for aer support
+ *
+ * @dev: class device that is converted into a Scsi_host.
+ * @attr: device attribute, not used.
+ * @buf: containing the string "selective".
+ * @count: unused variable.
+ *
+ * Description:
+ * If the val is 1 and currently the device's AER capability was not
+ * enabled, invoke the kernel's enable AER helper routine, trying to
+ * enable the device's AER capability. If the helper routine enabling
+ * AER returns success, update the device's cfg_aer_support flag to
+ * indicate AER is supported by the device; otherwise, if the device
+ * AER capability is already enabled to support AER, then do nothing.
+ *
+ * If the val is 0 and currently the device's AER support was enabled,
+ * invoke the kernel's disable AER helper routine. After that, update
+ * the device's cfg_aer_support flag to indicate AER is not supported
+ * by the device; otherwise, if the device AER capability is already
+ * disabled from supporting AER, then do nothing.
+ *
+ * Returns:
+ * length of the buf on success if val is in range the intended mode
+ * is supported.
+ * -EINVAL if val out of range or intended mode is not supported.
+ **/
+static ssize_t
+lpfc_aer_support_store(struct device *dev, struct device_attribute *attr,
+		       const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
+	struct lpfc_hba *phba = vport->phba;
+	int val = 0, rc = -EINVAL;
+
+	if (!isdigit(buf[0]))
+		return -EINVAL;
+	if (sscanf(buf, "%i", &val) != 1)
+		return -EINVAL;
+
+	switch (val) {
+	case 0:
+		if (phba->hba_flag & HBA_AER_ENABLED) {
+			rc = pci_disable_pcie_error_reporting(phba->pcidev);
+			if (!rc) {
+				spin_lock_irq(&phba->hbalock);
+				phba->hba_flag &= ~HBA_AER_ENABLED;
+				spin_unlock_irq(&phba->hbalock);
+				phba->cfg_aer_support = 0;
+				rc = strlen(buf);
+			} else
+				rc = -EINVAL;
+		} else
+			phba->cfg_aer_support = 0;
+		rc = strlen(buf);
+		break;
+	case 1:
+		if (!(phba->hba_flag & HBA_AER_ENABLED)) {
+			rc = pci_enable_pcie_error_reporting(phba->pcidev);
+			if (!rc) {
+				spin_lock_irq(&phba->hbalock);
+				phba->hba_flag |= HBA_AER_ENABLED;
+				spin_unlock_irq(&phba->hbalock);
+				phba->cfg_aer_support = 1;
+				rc = strlen(buf);
+			} else
+				 rc = -EINVAL;
+		} else
+			phba->cfg_aer_support = 1;
+		rc = strlen(buf);
+		break;
+	default:
+		rc = -EINVAL;
+		break;
+	}
+	return rc;
+}
+
+static int lpfc_aer_support = 1;
+module_param(lpfc_aer_support, int, 1);
+MODULE_PARM_DESC(lpfc_aer_support, "Enable PCIe device AER support");
+lpfc_param_show(aer_support)
+
+/**
+ * lpfc_aer_support_init - Set the initial adapters aer support flag
+ * @phba: lpfc_hba pointer.
+ * @val: link speed value.
+ *
+ * Description:
+ * If val is in a valid range [0,1], then set the adapter's initial
+ * cfg_aer_support field. It will be up to the driver's probe_one
+ * routine to determine whether the device's AER support can be set
+ * or not.
+ *
+ * Notes:
+ * If the value is not in range log a kernel error message, and
+ * choose the default value of setting AER support and return.
+ *
+ * Returns:
+ * zero if val saved.
+ * -EINVAL val out of range
+ **/
+static int
+lpfc_aer_support_init(struct lpfc_hba *phba, int val)
+{
+	if (val == 0 || val == 1) {
+		phba->cfg_aer_support = val;
+		return 0;
+	}
+	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"2712 lpfc_aer_support attribute value %d out "
+			"of range, allowed values are 0|1, setting it "
+			"to default value of 1\n", val);
+	phba->cfg_aer_support = 1;
+	return -EINVAL;
+}
+
+static DEVICE_ATTR(lpfc_aer_support, S_IRUGO | S_IWUSR,
+		   lpfc_aer_support_show, lpfc_aer_support_store);
+
+/**
+ * lpfc_aer_cleanup_state - Clean up aer state to the aer enabled device
+ * @dev: class device that is converted into a Scsi_host.
+ * @attr: device attribute, not used.
+ * @buf: containing the string "selective".
+ * @count: unused variable.
+ *
+ * Description:
+ * If the @buf contains 1 and the device currently has the AER support
+ * enabled, then invokes the kernel AER helper routine
+ * pci_cleanup_aer_uncorrect_error_status to clean up the uncorrectable
+ * error status register.
+ *
+ * Notes:
+ *
+ * Returns:
+ * -EINVAL if the buf does not contain the 1 or the device is not currently
+ * enabled with the AER support.
+ **/
+static ssize_t
+lpfc_aer_cleanup_state(struct device *dev, struct device_attribute *attr,
+		       const char *buf, size_t count)
+{
+	struct Scsi_Host  *shost = class_to_shost(dev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_hba   *phba = vport->phba;
+	int val, rc = -1;
+
+	if (!isdigit(buf[0]))
+		return -EINVAL;
+	if (sscanf(buf, "%i", &val) != 1)
+		return -EINVAL;
+
+	if (val == 1 && phba->hba_flag & HBA_AER_ENABLED)
+		rc = pci_cleanup_aer_uncorrect_error_status(phba->pcidev);
+
+	if (rc == 0)
+		return strlen(buf);
+	else
+		return -EINVAL;
+}
+
+static DEVICE_ATTR(lpfc_aer_state_cleanup, S_IWUSR, NULL,
+		   lpfc_aer_cleanup_state);
+
+/*
 # lpfc_fcp_class:  Determines FC class to use for the FCP protocol.
 # Value range is [2,3]. Default value is 3.
 */
@@ -3068,6 +3242,8 @@ struct device_attribute *lpfc_hba_attrs[] = {
 	&dev_attr_lpfc_max_scsicmpl_time,
 	&dev_attr_lpfc_stat_data_ctrl,
 	&dev_attr_lpfc_prot_sg_seg_cnt,
+	&dev_attr_lpfc_aer_support,
+	&dev_attr_lpfc_aer_state_cleanup,
 	NULL,
 };
 
@@ -4244,6 +4420,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
 	lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth);
 	lpfc_enable_fip_init(phba, lpfc_enable_fip);
 	lpfc_hba_log_verbose_init(phba, lpfc_log_verbose);
+	lpfc_aer_support_init(phba, lpfc_aer_support);
 
 	return;
 }