[SCSI] lpfc 8.3.24: Miscellaneous Fixes and Corrections

Miscellaneous Fixes and Corrections
- Remove the memset in the lpfc_sli4_remove_rpi_hdrs call.
- Correct swapping of SGE word 2 relative to offset value
- Reorganize CQ and EQ usage to comply with SLI4 Specification.
- Expand the driver to check the rn bit. Only detect an error if the error bit
  is set and the RN bit is NOT set.
- If mailbox completion code is not success AND the mailbox status is success,
  then and only then will the driver overwrite the mailbox status.
- When driver initializing device, if the device is on a PCIe bus, set
  PCI's "needs fundamental reset" bit so that EEH uses fundamental reset
  instead of hot reset for recovery.
- Prevent driver from using new WWN when changed in firmware (until driver
  reload)
- When HBA reports maximum SGE size > 0xffffffff (infinite), override
  with 0x80000000.
- Fixed potential missed SLI4 device initialization failure conditions.
- Added 100ms delay before driver action following IF_TYPE_2 function reset.
- Reverted patch to UNREG/REG on PLOGI to mapped/unmapped node.
- Add a check for the CVL received flag in the fcf inuse routine to avoid
  unregistering the fcf if Devloss fires before Delay discover timer fires.

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>

1 files changed, 6 insertions, 4 deletions

diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index c93fca058603..ffe82d169b40 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -1665,7 +1665,8 @@ lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes,
 	/* Get fast-path complete queue information */
 	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
 			"Fast-path FCP CQ information:\n");
-	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++) {
+	fcp_qidx = 0;
+	do {
 		len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
 				"Associated EQID[%02d]:\n",
 				phba->sli4_hba.fcp_cq[fcp_qidx]->assoc_qid);
@@ -1678,7 +1679,7 @@ lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes,
 				phba->sli4_hba.fcp_cq[fcp_qidx]->entry_size,
 				phba->sli4_hba.fcp_cq[fcp_qidx]->host_index,
 				phba->sli4_hba.fcp_cq[fcp_qidx]->hba_index);
-	}
+	} while (++fcp_qidx < phba->cfg_fcp_eq_count);
 	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n");
 
 	/* Get mailbox queue information */
@@ -2012,7 +2013,8 @@ lpfc_idiag_queacc_write(struct file *file, const char __user *buf,
 			goto pass_check;
 		}
 		/* FCP complete queue */
-		for (qidx = 0; qidx < phba->cfg_fcp_eq_count; qidx++) {
+		qidx = 0;
+		do {
 			if (phba->sli4_hba.fcp_cq[qidx]->queue_id == queid) {
 				/* Sanity check */
 				rc = lpfc_idiag_que_param_check(
@@ -2024,7 +2026,7 @@ lpfc_idiag_queacc_write(struct file *file, const char __user *buf,
 						phba->sli4_hba.fcp_cq[qidx];
 				goto pass_check;
 			}
-		}
+		} while (++qidx < phba->cfg_fcp_eq_count);
 		goto error_out;
 		break;
 	case LPFC_IDIAG_MQ: