summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc/lpfc_init.c
diff options
context:
space:
mode:
authorJames Smart <james.smart@emulex.com>2014-09-03 18:57:08 +0200
committerChristoph Hellwig <hch@lst.de>2014-09-16 18:10:09 +0200
commit2f6fa2c911167e7a3fda130689a36f55b39ed86d (patch)
treee5adad6b8e32a0c54fb0fb31e50449df18ce33d0 /drivers/scsi/lpfc/lpfc_init.c
parentlpfc: fix quarantined XRI recovery qualifier state in link bounce (diff)
downloadlinux-2f6fa2c911167e7a3fda130689a36f55b39ed86d.tar.xz
linux-2f6fa2c911167e7a3fda130689a36f55b39ed86d.zip
lpfc: fix IP Reset processing - wait for RDY before proceeding
Fix IP Reset processing - wait for RDY before proceeding Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_init.c')
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c109
1 files changed, 47 insertions, 62 deletions
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 7f54916c4f62..33a24fc0afec 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -7903,7 +7903,8 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
LPFC_MBOXQ_t *mboxq;
uint32_t rc = 0, if_type;
uint32_t shdr_status, shdr_add_status;
- uint32_t rdy_chk, num_resets = 0, reset_again = 0;
+ uint32_t rdy_chk;
+ uint32_t port_reset = 0;
union lpfc_sli4_cfg_shdr *shdr;
struct lpfc_register reg_data;
uint16_t devid;
@@ -7943,9 +7944,42 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
}
break;
case LPFC_SLI_INTF_IF_TYPE_2:
- for (num_resets = 0;
- num_resets < MAX_IF_TYPE_2_RESETS;
- num_resets++) {
+wait:
+ /*
+ * Poll the Port Status Register and wait for RDY for
+ * up to 30 seconds. If the port doesn't respond, treat
+ * it as an error.
+ */
+ for (rdy_chk = 0; rdy_chk < 3000; rdy_chk++) {
+ if (lpfc_readl(phba->sli4_hba.u.if_type2.
+ STATUSregaddr, &reg_data.word0)) {
+ rc = -ENODEV;
+ goto out;
+ }
+ if (bf_get(lpfc_sliport_status_rdy, &reg_data))
+ break;
+ msleep(20);
+ }
+
+ if (!bf_get(lpfc_sliport_status_rdy, &reg_data)) {
+ phba->work_status[0] = readl(
+ phba->sli4_hba.u.if_type2.ERR1regaddr);
+ phba->work_status[1] = readl(
+ phba->sli4_hba.u.if_type2.ERR2regaddr);
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2890 Port not ready, port status reg "
+ "0x%x error 1=0x%x, error 2=0x%x\n",
+ reg_data.word0,
+ phba->work_status[0],
+ phba->work_status[1]);
+ rc = -ENODEV;
+ goto out;
+ }
+
+ if (!port_reset) {
+ /*
+ * Reset the port now
+ */
reg_data.word0 = 0;
bf_set(lpfc_sliport_ctrl_end, &reg_data,
LPFC_SLIPORT_LITTLE_ENDIAN);
@@ -7956,64 +7990,16 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
/* flush */
pci_read_config_word(phba->pcidev,
PCI_DEVICE_ID, &devid);
- /*
- * Poll the Port Status Register and wait for RDY for
- * up to 10 seconds. If the port doesn't respond, treat
- * it as an error. If the port responds with RN, start
- * the loop again.
- */
- for (rdy_chk = 0; rdy_chk < 1000; rdy_chk++) {
- msleep(10);
- if (lpfc_readl(phba->sli4_hba.u.if_type2.
- STATUSregaddr, &reg_data.word0)) {
- rc = -ENODEV;
- goto out;
- }
- if (bf_get(lpfc_sliport_status_rn, &reg_data))
- reset_again++;
- if (bf_get(lpfc_sliport_status_rdy, &reg_data))
- break;
- }
-
- /*
- * If the port responds to the init request with
- * reset needed, delay for a bit and restart the loop.
- */
- if (reset_again && (rdy_chk < 1000)) {
- msleep(10);
- reset_again = 0;
- continue;
- }
- /* Detect any port errors. */
- if ((bf_get(lpfc_sliport_status_err, &reg_data)) ||
- (rdy_chk >= 1000)) {
- phba->work_status[0] = readl(
- phba->sli4_hba.u.if_type2.ERR1regaddr);
- phba->work_status[1] = readl(
- phba->sli4_hba.u.if_type2.ERR2regaddr);
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "2890 Port error detected during port "
- "reset(%d): wait_tmo:%d ms, "
- "port status reg 0x%x, "
- "error 1=0x%x, error 2=0x%x\n",
- num_resets, rdy_chk*10,
- reg_data.word0,
- phba->work_status[0],
- phba->work_status[1]);
- rc = -ENODEV;
- }
-
- /*
- * Terminate the outer loop provided the Port indicated
- * ready within 10 seconds.
- */
- if (rdy_chk < 1000)
- break;
+ port_reset = 1;
+ msleep(20);
+ goto wait;
+ } else if (bf_get(lpfc_sliport_status_rn, &reg_data)) {
+ rc = -ENODEV;
+ goto out;
}
- /* delay driver action following IF_TYPE_2 function reset */
- msleep(100);
break;
+
case LPFC_SLI_INTF_IF_TYPE_1:
default:
break;
@@ -8021,11 +8007,10 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
out:
/* Catch the not-ready port failure after a port reset. */
- if (num_resets >= MAX_IF_TYPE_2_RESETS) {
+ if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"3317 HBA not functional: IP Reset Failed "
- "after (%d) retries, try: "
- "echo fw_reset > board_mode\n", num_resets);
+ "try: echo fw_reset > board_mode\n");
rc = -ENODEV;
}