Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6:
  [SCSI] aic79xx: make driver respect nvram for IU and QAS settings
  [SCSI] don't attach ULD to Dell Universal Xport
  [SCSI] lpfc 8.3.3 : Update driver version to 8.3.3
  [SCSI] lpfc 8.3.3 : Add support for Target Reset handler entrypoint
  [SCSI] lpfc 8.3.3 : Fix a couple of spin_lock and memory issues and a crash
  [SCSI] lpfc 8.3.3 : FC/FCOE discovery fixes
  [SCSI] lpfc 8.3.3 : Fix various SLI-3 vs SLI-4 differences
  [SCSI] qla2xxx: Resolve a performance issue in interrupt
  [SCSI] cnic, bnx2i: Fix build failure when CONFIG_PCI is not set.
  [SCSI] nsp_cs: time_out reaches -1
  [SCSI] qla2xxx: fix printk format warnings
  [SCSI] ncr53c8xx: div reaches -1
  [SCSI] compat: don't perform unneeded copy in sg_io code
  [SCSI] zfcp: Update FC pass-through support
  [SCSI] zfcp: Add FC pass-through support
  [SCSI] FC Pass Thru support

16 files changed, 610 insertions, 448 deletions

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 540569849099..1877d9811831 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -457,10 +457,6 @@ struct lpfc_hba {
 	void (*lpfc_scsi_prep_cmnd)
 		(struct lpfc_vport *, struct lpfc_scsi_buf *,
 		 struct lpfc_nodelist *);
-	int (*lpfc_scsi_prep_task_mgmt_cmd)
-		(struct lpfc_vport *, struct lpfc_scsi_buf *,
-		 unsigned int, uint8_t);
-
 	/* IOCB interface function jump table entries */
 	int (*__lpfc_sli_issue_iocb)
 		(struct lpfc_hba *, uint32_t,
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index d73e677201f8..fc07be5fbce9 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -3113,6 +3113,9 @@ sysfs_ctlreg_write(struct kobject *kobj, struct bin_attribute *bin_attr,
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
 	struct lpfc_hba   *phba = vport->phba;
 
+	if (phba->sli_rev >= LPFC_SLI_REV4)
+		return -EPERM;
+
 	if ((off + count) > FF_REG_AREA_SIZE)
 		return -ERANGE;
 
@@ -3163,6 +3166,9 @@ sysfs_ctlreg_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
 	struct lpfc_hba   *phba = vport->phba;
 
+	if (phba->sli_rev >= LPFC_SLI_REV4)
+		return -EPERM;
+
 	if (off > FF_REG_AREA_SIZE)
 		return -ERANGE;
 
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 1dbccfd3d022..0e532f072eb3 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -1732,7 +1732,9 @@ lpfc_decode_firmware_rev(struct lpfc_hba *phba, char *fwrevision, int flag)
 	uint32_t *ptr, str[4];
 	uint8_t *fwname;
 
-	if (vp->rev.rBit) {
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		sprintf(fwrevision, "%s", vp->rev.opFwName);
+	else if (vp->rev.rBit) {
 		if (psli->sli_flag & LPFC_SLI_ACTIVE)
 			rev = vp->rev.sli2FwRev;
 		else
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 6bdeb14878a2..f72fdf23bf1b 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -168,6 +168,19 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp,
 	if (elsiocb == NULL)
 		return NULL;
 
+	/*
+	 * If this command is for fabric controller and HBA running
+	 * in FIP mode send FLOGI, FDISC and LOGO as FIP frames.
+	 */
+	if ((did == Fabric_DID) &&
+		bf_get(lpfc_fip_flag, &phba->sli4_hba.sli4_flags) &&
+		((elscmd == ELS_CMD_FLOGI) ||
+		 (elscmd == ELS_CMD_FDISC) ||
+		 (elscmd == ELS_CMD_LOGO)))
+		elsiocb->iocb_flag |= LPFC_FIP_ELS;
+	else
+		elsiocb->iocb_flag &= ~LPFC_FIP_ELS;
+
 	icmd = &elsiocb->iocb;
 
 	/* fill in BDEs for command */
@@ -6108,9 +6121,17 @@ lpfc_issue_els_fdisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	icmd->un.elsreq64.myID = 0;
 	icmd->un.elsreq64.fl = 1;
 
-	/* For FDISC, Let FDISC rsp set the NPortID for this VPI */
-	icmd->ulpCt_h = 1;
-	icmd->ulpCt_l = 0;
+	if  (phba->sli_rev == LPFC_SLI_REV4) {
+		/* FDISC needs to be 1 for WQE VPI */
+		elsiocb->iocb.ulpCt_h = (SLI4_CT_VPI >> 1) & 1;
+		elsiocb->iocb.ulpCt_l = SLI4_CT_VPI & 1 ;
+		/* Set the ulpContext to the vpi */
+		elsiocb->iocb.ulpContext = vport->vpi + phba->vpi_base;
+	} else {
+		/* For FDISC, Let FDISC rsp set the NPortID for this VPI */
+		icmd->ulpCt_h = 1;
+		icmd->ulpCt_l = 0;
+	}
 
 	pcmd = (uint8_t *) (((struct lpfc_dmabuf *) elsiocb->context2)->virt);
 	*((uint32_t *) (pcmd)) = ELS_CMD_FDISC;
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 35c41ae75be2..ed46b24a3380 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1197,6 +1197,11 @@ lpfc_match_fcf_conn_list(struct lpfc_hba *phba,
 {
 	struct lpfc_fcf_conn_entry *conn_entry;
 
+	/* If FCF not available return 0 */
+	if (!bf_get(lpfc_fcf_record_fcf_avail, new_fcf_record) ||
+		!bf_get(lpfc_fcf_record_fcf_valid, new_fcf_record))
+		return 0;
+
 	if (!phba->cfg_enable_fip) {
 		*boot_flag = 0;
 		*addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
@@ -1216,6 +1221,14 @@ lpfc_match_fcf_conn_list(struct lpfc_hba *phba,
 		*boot_flag = 0;
 		*addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
 			new_fcf_record);
+
+		/*
+		 * When there are no FCF connect entries, use driver's default
+		 * addressing mode - FPMA.
+		 */
+		if (*addr_mode & LPFC_FCF_FPMA)
+			*addr_mode = LPFC_FCF_FPMA;
+
 		*vlan_id = 0xFFFF;
 		return 1;
 	}
@@ -1241,6 +1254,14 @@ lpfc_match_fcf_conn_list(struct lpfc_hba *phba,
 		}
 
 		/*
+		 * If connection record does not support any addressing mode,
+		 * skip the FCF record.
+		 */
+		if (!(bf_get(lpfc_fcf_record_mac_addr_prov, new_fcf_record)
+			& (LPFC_FCF_FPMA | LPFC_FCF_SPMA)))
+			continue;
+
+		/*
 		 * Check if the connection record specifies a required
 		 * addressing mode.
 		 */
@@ -1272,6 +1293,11 @@ lpfc_match_fcf_conn_list(struct lpfc_hba *phba,
 		else
 			*boot_flag = 0;
 
+		/*
+		 * If user did not specify any addressing mode, or if the
+		 * prefered addressing mode specified by user is not supported
+		 * by FCF, allow fabric to pick the addressing mode.
+		 */
 		*addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
 				new_fcf_record);
 		/*
@@ -1297,12 +1323,6 @@ lpfc_match_fcf_conn_list(struct lpfc_hba *phba,
 			!(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
 			(*addr_mode & LPFC_FCF_FPMA))
 				*addr_mode = LPFC_FCF_FPMA;
-		/*
-		 * If user did not specify any addressing mode, use FPMA if
-		 * possible else use SPMA.
-		 */
-		else if (*addr_mode & LPFC_FCF_FPMA)
-			*addr_mode = LPFC_FCF_FPMA;
 
 		if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID)
 			*vlan_id = conn_entry->conn_rec.vlan_tag;
@@ -1864,7 +1884,7 @@ lpfc_mbx_cmpl_read_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 		vport->fc_flag &= ~FC_BYPASSED_MODE;
 	spin_unlock_irq(shost->host_lock);
 
-	if (((phba->fc_eventTag + 1) < la->eventTag) ||
+	if ((phba->fc_eventTag  < la->eventTag) ||
 	    (phba->fc_eventTag == la->eventTag)) {
 		phba->fc_stat.LinkMultiEvent++;
 		if (la->attType == AT_LINK_UP)
@@ -2925,6 +2945,7 @@ lpfc_unreg_rpi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 		lpfc_no_rpi(phba, ndlp);
 		ndlp->nlp_rpi = 0;
 		ndlp->nlp_flag &= ~NLP_RPI_VALID;
+		ndlp->nlp_flag &= ~NLP_NPR_ADISC;
 		return 1;
 	}
 	return 0;
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 02aa016b93e9..8a3a026667e4 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1183,7 +1183,6 @@ typedef struct {
 #define PCI_DEVICE_ID_ZEPHYR_DCSP   0xfe12
 #define PCI_VENDOR_ID_SERVERENGINE  0x19a2
 #define PCI_DEVICE_ID_TIGERSHARK    0x0704
-#define PCI_DEVICE_ID_TIGERSHARK_S  0x0705
 
 #define JEDEC_ID_ADDRESS            0x0080001c
 #define FIREFLY_JEDEC_ID            0x1ACC
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 39c34b3ad29d..2995d128f07f 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -422,9 +422,9 @@ struct lpfc_wqe_generic{
 #define lpfc_wqe_gen_pri_WORD		word10
 	uint32_t word11;
 #define lpfc_wqe_gen_cq_id_SHIFT	16
-#define lpfc_wqe_gen_cq_id_MASK		0x000003FF
+#define lpfc_wqe_gen_cq_id_MASK		0x0000FFFF
 #define lpfc_wqe_gen_cq_id_WORD		word11
-#define LPFC_WQE_CQ_ID_DEFAULT	0x3ff
+#define LPFC_WQE_CQ_ID_DEFAULT	0xffff
 #define lpfc_wqe_gen_wqec_SHIFT		7
 #define lpfc_wqe_gen_wqec_MASK		0x00000001
 #define lpfc_wqe_gen_wqec_WORD		word11
@@ -1128,7 +1128,7 @@ struct fcf_record {
 #define lpfc_fcf_record_mac_5_WORD		word4
 #define lpfc_fcf_record_fcf_avail_SHIFT		16
 #define lpfc_fcf_record_fcf_avail_MASK		0x000000FF
-#define lpfc_fcf_record_fc_avail_WORD		word4
+#define lpfc_fcf_record_fcf_avail_WORD		word4
 #define lpfc_fcf_record_mac_addr_prov_SHIFT	24
 #define lpfc_fcf_record_mac_addr_prov_MASK	0x000000FF
 #define lpfc_fcf_record_mac_addr_prov_WORD	word4
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 2f5907f92eea..fc67cc65c63b 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -428,7 +428,8 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 	/* Reset the DFT_HBA_Q_DEPTH to the max xri  */
 	if (phba->cfg_hba_queue_depth > (mb->un.varRdConfig.max_xri+1))
 		phba->cfg_hba_queue_depth =
-			mb->un.varRdConfig.max_xri + 1;
+			(mb->un.varRdConfig.max_xri + 1) -
+					lpfc_sli4_get_els_iocb_cnt(phba);
 
 	phba->lmt = mb->un.varRdConfig.lmt;
 
@@ -1646,10 +1647,6 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
 		oneConnect = 1;
 		m = (typeof(m)) {"OCe10100-F", max_speed, "PCIe"};
 		break;
-	case PCI_DEVICE_ID_TIGERSHARK_S:
-		oneConnect = 1;
-		m = (typeof(m)) {"OCe10100-F-S", max_speed, "PCIe"};
-		break;
 	default:
 		m = (typeof(m)){ NULL };
 		break;
@@ -3543,6 +3540,7 @@ lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba)
 
 	/* Free the allocated rpi headers. */
 	lpfc_sli4_remove_rpi_hdrs(phba);
+	lpfc_sli4_remove_rpis(phba);
 
 	/* Free the ELS sgl list */
 	lpfc_free_active_sgl(phba);
@@ -7184,16 +7182,19 @@ lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba)
 {
 	int max_xri = phba->sli4_hba.max_cfg_param.max_xri;
 
-	if (max_xri <= 100)
-		return 4;
-	else if (max_xri <= 256)
-		return 8;
-	else if (max_xri <= 512)
-		return 16;
-	else if (max_xri <= 1024)
-		return 32;
-	else
-		return 48;
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		if (max_xri <= 100)
+			return 4;
+		else if (max_xri <= 256)
+			return 8;
+		else if (max_xri <= 512)
+			return 16;
+		else if (max_xri <= 1024)
+			return 32;
+		else
+			return 48;
+	} else
+		return 0;
 }
 
 /**
@@ -7642,7 +7643,6 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
 
 	switch (dev_id) {
 	case PCI_DEVICE_ID_TIGERSHARK:
-	case PCI_DEVICE_ID_TIGERSHARK_S:
 		rc = lpfc_pci_probe_one_s4(pdev, pid);
 		break;
 	default:
@@ -7941,8 +7941,6 @@ static struct pci_device_id lpfc_id_table[] = {
 		PCI_ANY_ID, PCI_ANY_ID, },
 	{PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TIGERSHARK,
 		PCI_ANY_ID, PCI_ANY_ID, },
-	{PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TIGERSHARK_S,
-		PCI_ANY_ID, PCI_ANY_ID, },
 	{ 0 }
 };
 
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index b9b451c09010..3423571dd1b3 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1631,6 +1631,7 @@ lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox,
 		/* In case of malloc fails, proceed with whatever we have */
 		if (!viraddr)
 			break;
+		memset(viraddr, 0, PAGE_SIZE);
 		mbox->sge_array->addr[pagen] = viraddr;
 		/* Keep the first page for later sub-header construction */
 		if (pagen == 0)
@@ -1715,8 +1716,10 @@ lpfc_request_features(struct lpfc_hba *phba, struct lpfcMboxq *mboxq)
 	/* Set up host requested features. */
 	bf_set(lpfc_mbx_rq_ftr_rq_fcpi, &mboxq->u.mqe.un.req_ftrs, 1);
 
-	/* Virtual fabrics and FIPs are not supported yet. */
-	bf_set(lpfc_mbx_rq_ftr_rq_ifip, &mboxq->u.mqe.un.req_ftrs, 0);
+	if (phba->cfg_enable_fip)
+		bf_set(lpfc_mbx_rq_ftr_rq_ifip, &mboxq->u.mqe.un.req_ftrs, 0);
+	else
+		bf_set(lpfc_mbx_rq_ftr_rq_ifip, &mboxq->u.mqe.un.req_ftrs, 1);
 
 	/* Enable DIF (block guard) only if configured to do so. */
 	if (phba->cfg_enable_bg)
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 09f659f77bb3..3e74136f1ede 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -497,7 +497,7 @@ lpfc_rcv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		lpfc_els_rsp_acc(vport, ELS_CMD_PRLO, cmdiocb, ndlp, NULL);
 	else
 		lpfc_els_rsp_acc(vport, ELS_CMD_ACC, cmdiocb, ndlp, NULL);
-	if ((ndlp->nlp_type & NLP_FABRIC) &&
+	if ((ndlp->nlp_DID == Fabric_DID) &&
 		vport->port_type == LPFC_NPIV_PORT) {
 		lpfc_linkdown_port(vport);
 		mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ * 1);
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 7991ba1980ae..da59c4f0168f 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -116,6 +116,27 @@ lpfc_debug_save_dif(struct scsi_cmnd *cmnd)
 }
 
 /**
+ * lpfc_sli4_set_rsp_sgl_last - Set the last bit in the response sge.
+ * @phba: Pointer to HBA object.
+ * @lpfc_cmd: lpfc scsi command object pointer.
+ *
+ * This function is called from the lpfc_prep_task_mgmt_cmd function to
+ * set the last bit in the response sge entry.
+ **/
+static void
+lpfc_sli4_set_rsp_sgl_last(struct lpfc_hba *phba,
+				struct lpfc_scsi_buf *lpfc_cmd)
+{
+	struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
+	if (sgl) {
+		sgl += 1;
+		sgl->word2 = le32_to_cpu(sgl->word2);
+		bf_set(lpfc_sli4_sge_last, sgl, 1);
+		sgl->word2 = cpu_to_le32(sgl->word2);
+	}
+}
+
+/**
  * lpfc_update_stats - Update statistical data for the command completion
  * @phba: Pointer to HBA object.
  * @lpfc_cmd: lpfc scsi command object pointer.
@@ -1978,7 +1999,7 @@ lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport,
 }
 
 /**
- * lpfc_scsi_unprep_dma_buf_s3 - Un-map DMA mapping of SG-list for SLI3 dev
+ * lpfc_scsi_unprep_dma_buf - Un-map DMA mapping of SG-list for dev
  * @phba: The HBA for which this call is being executed.
  * @psb: The scsi buffer which is going to be un-mapped.
  *
@@ -1986,7 +2007,7 @@ lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport,
  * field of @lpfc_cmd for device with SLI-3 interface spec.
  **/
 static void
-lpfc_scsi_unprep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+lpfc_scsi_unprep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
 {
 	/*
 	 * There are only two special cases to consider.  (1) the scsi command
@@ -2003,36 +2024,6 @@ lpfc_scsi_unprep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
 }
 
 /**
- * lpfc_scsi_unprep_dma_buf_s4 - Un-map DMA mapping of SG-list for SLI4 dev
- * @phba: The Hba for which this call is being executed.
- * @psb: The scsi buffer which is going to be un-mapped.
- *
- * This routine does DMA un-mapping of scatter gather list of scsi command
- * field of @lpfc_cmd for device with SLI-4 interface spec. If we have to
- * remove the sgl for this scsi buffer then we will do it here. For now
- * we should be able to just call the sli3 unprep routine.
- **/
-static void
-lpfc_scsi_unprep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
-{
-	lpfc_scsi_unprep_dma_buf_s3(phba, psb);
-}
-
-/**
- * lpfc_scsi_unprep_dma_buf - Wrapper function for unmap DMA mapping of SG-list
- * @phba: The Hba for which this call is being executed.
- * @psb: The scsi buffer which is going to be un-mapped.
- *
- * This routine does DMA un-mapping of scatter gather list of scsi command
- * field of @lpfc_cmd for device with SLI-4 interface spec.
- **/
-static void
-lpfc_scsi_unprep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
-{
-	phba->lpfc_scsi_unprep_dma_buf(phba, psb);
-}
-
-/**
  * lpfc_handler_fcp_err - FCP response handler
  * @vport: The virtual port for which this call is being executed.
  * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
@@ -2461,7 +2452,7 @@ lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd)
 }
 
 /**
- * lpfc_scsi_prep_cmnd_s3 - Convert scsi cmnd to FCP infor unit for SLI3 dev
+ * lpfc_scsi_prep_cmnd - Wrapper func for convert scsi cmnd to FCP info unit
  * @vport: The virtual port for which this call is being executed.
  * @lpfc_cmd: The scsi command which needs to send.
  * @pnode: Pointer to lpfc_nodelist.
@@ -2470,7 +2461,7 @@ lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd)
  * to transfer for device with SLI3 interface spec.
  **/
 static void
-lpfc_scsi_prep_cmnd_s3(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
 		    struct lpfc_nodelist *pnode)
 {
 	struct lpfc_hba *phba = vport->phba;
@@ -2558,46 +2549,7 @@ lpfc_scsi_prep_cmnd_s3(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
 }
 
 /**
- * lpfc_scsi_prep_cmnd_s4 - Convert scsi cmnd to FCP infor unit for SLI4 dev
- * @vport: The virtual port for which this call is being executed.
- * @lpfc_cmd: The scsi command which needs to send.
- * @pnode: Pointer to lpfc_nodelist.
- *
- * This routine initializes fcp_cmnd and iocb data structure from scsi command
- * to transfer for device with SLI4 interface spec.
- **/
-static void
-lpfc_scsi_prep_cmnd_s4(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
-		       struct lpfc_nodelist *pnode)
-{
-	/*
-	 * The prep cmnd routines do not touch the sgl or its
-	 * entries. We may not have to do anything different.
-	 * I will leave this function in place until we can
-	 * run some IO through the driver and determine if changes
-	 * are needed.
-	 */
-	return lpfc_scsi_prep_cmnd_s3(vport, lpfc_cmd, pnode);
-}
-
-/**
- * lpfc_scsi_prep_cmnd - Wrapper func for convert scsi cmnd to FCP info unit
- * @vport: The virtual port for which this call is being executed.
- * @lpfc_cmd: The scsi command which needs to send.
- * @pnode: Pointer to lpfc_nodelist.
- *
- * This routine wraps the actual convert SCSI cmnd function pointer from
- * the lpfc_hba struct.
- **/
-static inline void
-lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
-		    struct lpfc_nodelist *pnode)
-{
-	vport->phba->lpfc_scsi_prep_cmnd(vport, lpfc_cmd, pnode);
-}
-
-/**
- * lpfc_scsi_prep_task_mgmt_cmnd_s3 - Convert SLI3 scsi TM cmd to FCP info unit
+ * lpfc_scsi_prep_task_mgmt_cmnd - Convert SLI3 scsi TM cmd to FCP info unit
  * @vport: The virtual port for which this call is being executed.
  * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
  * @lun: Logical unit number.
@@ -2611,7 +2563,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
  *   1 - Success
  **/
 static int
-lpfc_scsi_prep_task_mgmt_cmd_s3(struct lpfc_vport *vport,
+lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
 			     struct lpfc_scsi_buf *lpfc_cmd,
 			     unsigned int lun,
 			     uint8_t task_mgmt_cmd)
@@ -2653,68 +2605,13 @@ lpfc_scsi_prep_task_mgmt_cmd_s3(struct lpfc_vport *vport,
 		 * The driver will provide the timeout mechanism.
 		 */
 		piocb->ulpTimeout = 0;
-	} else {
+	} else
 		piocb->ulpTimeout = lpfc_cmd->timeout;
-	}
-
-	return 1;
-}
-
-/**
- * lpfc_scsi_prep_task_mgmt_cmnd_s4 - Convert SLI4 scsi TM cmd to FCP info unit
- * @vport: The virtual port for which this call is being executed.
- * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
- * @lun: Logical unit number.
- * @task_mgmt_cmd: SCSI task management command.
- *
- * This routine creates FCP information unit corresponding to @task_mgmt_cmd
- * for device with SLI-4 interface spec.
- *
- * Return codes:
- * 	0 - Error
- * 	1 - Success
- **/
-static int
-lpfc_scsi_prep_task_mgmt_cmd_s4(struct lpfc_vport *vport,
-				struct lpfc_scsi_buf *lpfc_cmd,
-				unsigned int lun,
-				uint8_t task_mgmt_cmd)
-{
-	/*
-	 * The prep cmnd routines do not touch the sgl or its
-	 * entries. We may not have to do anything different.
-	 * I will leave this function in place until we can
-	 * run some IO through the driver and determine if changes
-	 * are needed.
-	 */
-	return lpfc_scsi_prep_task_mgmt_cmd_s3(vport, lpfc_cmd, lun,
-						task_mgmt_cmd);
-}
 
-/**
- * lpfc_scsi_prep_task_mgmt_cmnd - Wrapper func convert scsi TM cmd to FCP info
- * @vport: The virtual port for which this call is being executed.
- * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
- * @lun: Logical unit number.
- * @task_mgmt_cmd: SCSI task management command.
- *
- * This routine wraps the actual convert SCSI TM to FCP information unit
- * function pointer from the lpfc_hba struct.
- *
- * Return codes:
- * 	0 - Error
- * 	1 - Success
- **/
-static inline int
-lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
-			     struct lpfc_scsi_buf *lpfc_cmd,
-			     unsigned int lun,
-			     uint8_t task_mgmt_cmd)
-{
-	struct lpfc_hba *phba = vport->phba;
+	if (vport->phba->sli_rev == LPFC_SLI_REV4)
+		lpfc_sli4_set_rsp_sgl_last(vport->phba, lpfc_cmd);
 
-	return phba->lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun,
-						  task_mgmt_cmd);
+	return 1;
 }
 
 /**
@@ -2730,23 +2627,19 @@ int
 lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
 {
 
+	phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf;
+	phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd;
+	phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf;
+
 	switch (dev_grp) {
 	case LPFC_PCI_DEV_LP:
 		phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s3;
 		phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s3;
-		phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s3;
-		phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s3;
-		phba->lpfc_scsi_prep_task_mgmt_cmd =
-					lpfc_scsi_prep_task_mgmt_cmd_s3;
 		phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3;
 		break;
 	case LPFC_PCI_DEV_OC:
 		phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s4;
 		phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4;
-		phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s4;
-		phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s4;
-		phba->lpfc_scsi_prep_task_mgmt_cmd =
-					lpfc_scsi_prep_task_mgmt_cmd_s4;
 		phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4;
 		break;
 	default:
@@ -2783,72 +2676,6 @@ lpfc_tskmgmt_def_cmpl(struct lpfc_hba *phba,
 }
 
 /**
- * lpfc_scsi_tgt_reset - Target reset handler
- * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure
- * @vport: The virtual port for which this call is being executed.
- * @tgt_id: Target ID.
- * @lun: Lun number.
- * @rdata: Pointer to lpfc_rport_data.
- *
- * This routine issues a TARGET RESET iocb to reset a target with @tgt_id ID.
- *
- * Return Code:
- *   0x2003 - Error
- *   0x2002 - Success.
- **/
-static int
-lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport,
-		    unsigned  tgt_id, unsigned int lun,
-		    struct lpfc_rport_data *rdata)
-{
-	struct lpfc_hba   *phba = vport->phba;
-	struct lpfc_iocbq *iocbq;
-	struct lpfc_iocbq *iocbqrsp;
-	int ret;
-	int status;
-
-	if (!rdata->pnode || !NLP_CHK_NODE_ACT(rdata->pnode))
-		return FAILED;
-
-	lpfc_cmd->rdata = rdata;
-	status = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun,
-					   FCP_TARGET_RESET);
-	if (!status)
-		return FAILED;
-
-	iocbq = &lpfc_cmd->cur_iocbq;
-	iocbqrsp = lpfc_sli_get_iocbq(phba);
-
-	if (!iocbqrsp)
-		return FAILED;
-
-	/* Issue Target Reset to TGT <num> */
-	lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
-			 "0702 Issue Target Reset to TGT %d Data: x%x x%x\n",
-			 tgt_id, rdata->pnode->nlp_rpi, rdata->pnode->nlp_flag);
-	status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
-					  iocbq, iocbqrsp, lpfc_cmd->timeout);
-	if (status != IOCB_SUCCESS) {
-		if (status == IOCB_TIMEDOUT) {
-			iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
-			ret = TIMEOUT_ERROR;
-		} else
-			ret = FAILED;
-		lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
-	} else {
-		ret = SUCCESS;
-		lpfc_cmd->result = iocbqrsp->iocb.un.ulpWord[4];
-		lpfc_cmd->status = iocbqrsp->iocb.ulpStatus;
-		if (lpfc_cmd->status == IOSTAT_LOCAL_REJECT &&
-			(lpfc_cmd->result & IOERR_DRVR_MASK))
-				lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
-	}
-
-	lpfc_sli_release_iocbq(phba, iocbqrsp);
-	return ret;
-}
-
-/**
  * lpfc_info - Info entry point of scsi_host_template data structure
  * @host: The scsi host for which this call is being executed.
  *
@@ -3228,156 +3055,334 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 	return ret;
 }
 
+static char *
+lpfc_taskmgmt_name(uint8_t task_mgmt_cmd)
+{
+	switch (task_mgmt_cmd) {
+	case FCP_ABORT_TASK_SET:
+		return "ABORT_TASK_SET";
+	case FCP_CLEAR_TASK_SET:
+		return "FCP_CLEAR_TASK_SET";
+	case FCP_BUS_RESET:
+		return "FCP_BUS_RESET";
+	case FCP_LUN_RESET:
+		return "FCP_LUN_RESET";
+	case FCP_TARGET_RESET:
+		return "FCP_TARGET_RESET";
+	case FCP_CLEAR_ACA:
+		return "FCP_CLEAR_ACA";
+	case FCP_TERMINATE_TASK:
+		return "FCP_TERMINATE_TASK";
+	default:
+		return "unknown";
+	}
+}
+
 /**
- * lpfc_device_reset_handler - scsi_host_template eh_device_reset entry point
- * @cmnd: Pointer to scsi_cmnd data structure.
+ * lpfc_send_taskmgmt - Generic SCSI Task Mgmt Handler
+ * @vport: The virtual port for which this call is being executed.
+ * @rdata: Pointer to remote port local data
+ * @tgt_id: Target ID of remote device.
+ * @lun_id: Lun number for the TMF
+ * @task_mgmt_cmd: type of TMF to send
  *
- * This routine does a device reset by sending a TARGET_RESET task management
- * command.
+ * This routine builds and sends a TMF (SCSI Task Mgmt Function) to
+ * a remote port.
  *
- * Return code :
- *  0x2003 - Error
- *  0x2002 - Success
+ * Return Code:
+ *   0x2003 - Error
+ *   0x2002 - Success.
  **/
 static int
-lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
+lpfc_send_taskmgmt(struct lpfc_vport *vport, struct lpfc_rport_data *rdata,
+		    unsigned  tgt_id, unsigned int lun_id,
+		    uint8_t task_mgmt_cmd)
 {
-	struct Scsi_Host  *shost = cmnd->device->host;
-	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
 	struct lpfc_hba   *phba = vport->phba;
 	struct lpfc_scsi_buf *lpfc_cmd;
-	struct lpfc_iocbq *iocbq, *iocbqrsp;
-	struct lpfc_rport_data *rdata = cmnd->device->hostdata;
-	struct lpfc_nodelist *pnode = rdata->pnode;
-	unsigned long later;
-	int ret = SUCCESS;
+	struct lpfc_iocbq *iocbq;
+	struct lpfc_iocbq *iocbqrsp;
+	int ret;
 	int status;
-	int cnt;
-	struct lpfc_scsi_event_header scsi_event;
 
-	lpfc_block_error_handler(cmnd);
-	/*
-	 * If target is not in a MAPPED state, delay the reset until
-	 * target is rediscovered or devloss timeout expires.
-	 */
-	later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
-	while (time_after(later, jiffies)) {
-		if (!pnode || !NLP_CHK_NODE_ACT(pnode))
-			return FAILED;
-		if (pnode->nlp_state == NLP_STE_MAPPED_NODE)
-			break;
-		schedule_timeout_uninterruptible(msecs_to_jiffies(500));
-		rdata = cmnd->device->hostdata;
-		if (!rdata)
-			break;
-		pnode = rdata->pnode;
-	}
-
-	scsi_event.event_type = FC_REG_SCSI_EVENT;
-	scsi_event.subcategory = LPFC_EVENT_TGTRESET;
-	scsi_event.lun = 0;
-	memcpy(scsi_event.wwpn, &pnode->nlp_portname, sizeof(struct lpfc_name));
-	memcpy(scsi_event.wwnn, &pnode->nlp_nodename, sizeof(struct lpfc_name));
-
-	fc_host_post_vendor_event(shost,
-		fc_get_event_number(),
-		sizeof(scsi_event),
-		(char *)&scsi_event,
-		LPFC_NL_VENDOR_ID);
-
-	if (!rdata || pnode->nlp_state != NLP_STE_MAPPED_NODE) {
-		lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
-				 "0721 LUN Reset rport "
-				 "failure: msec x%x rdata x%p\n",
-				 jiffies_to_msecs(jiffies - later), rdata);
+	if (!rdata->pnode || !NLP_CHK_NODE_ACT(rdata->pnode))
 		return FAILED;
-	}
+
 	lpfc_cmd = lpfc_get_scsi_buf(phba);
 	if (lpfc_cmd == NULL)
 		return FAILED;
 	lpfc_cmd->timeout = 60;
 	lpfc_cmd->rdata = rdata;
 
-	status = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd,
-					      cmnd->device->lun,
-					      FCP_TARGET_RESET);
+	status = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun_id,
+					   task_mgmt_cmd);
 	if (!status) {
 		lpfc_release_scsi_buf(phba, lpfc_cmd);
 		return FAILED;
 	}
-	iocbq = &lpfc_cmd->cur_iocbq;
 
-	/* get a buffer for this IOCB command response */
+	iocbq = &lpfc_cmd->cur_iocbq;
 	iocbqrsp = lpfc_sli_get_iocbq(phba);
 	if (iocbqrsp == NULL) {
 		lpfc_release_scsi_buf(phba, lpfc_cmd);
 		return FAILED;
 	}
+
 	lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
-			 "0703 Issue target reset to TGT %d LUN %d "
-			 "rpi x%x nlp_flag x%x\n", cmnd->device->id,
-			 cmnd->device->lun, pnode->nlp_rpi, pnode->nlp_flag);
+			 "0702 Issue %s to TGT %d LUN %d "
+			 "rpi x%x nlp_flag x%x\n",
+			 lpfc_taskmgmt_name(task_mgmt_cmd), tgt_id, lun_id,
+			 rdata->pnode->nlp_rpi, rdata->pnode->nlp_flag);
+
 	status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
 					  iocbq, iocbqrsp, lpfc_cmd->timeout);
-	if (status == IOCB_TIMEDOUT) {
-		iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
-		ret = TIMEOUT_ERROR;
-	} else {
-		if (status != IOCB_SUCCESS)
+	if (status != IOCB_SUCCESS) {
+		if (status == IOCB_TIMEDOUT) {
+			iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
+			ret = TIMEOUT_ERROR;
+		} else
 			ret = FAILED;
-		lpfc_release_scsi_buf(phba, lpfc_cmd);
-	}
-	lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
-			 "0713 SCSI layer issued device reset (%d, %d) "
-			 "return x%x status x%x result x%x\n",
-			 cmnd->device->id, cmnd->device->lun, ret,
-			 iocbqrsp->iocb.ulpStatus,
+		lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+			 "0727 TMF %s to TGT %d LUN %d failed (%d, %d)\n",
+			 lpfc_taskmgmt_name(task_mgmt_cmd),
+			 tgt_id, lun_id, iocbqrsp->iocb.ulpStatus,
 			 iocbqrsp->iocb.un.ulpWord[4]);
+	} else
+		ret = SUCCESS;
+
 	lpfc_sli_release_iocbq(phba, iocbqrsp);
-	cnt = lpfc_sli_sum_iocb(vport, cmnd->device->id, cmnd->device->lun,
-				LPFC_CTX_TGT);
+
+	if (ret != TIMEOUT_ERROR)
+		lpfc_release_scsi_buf(phba, lpfc_cmd);
+
+	return ret;
+}
+
+/**
+ * lpfc_chk_tgt_mapped -
+ * @vport: The virtual port to check on
+ * @cmnd: Pointer to scsi_cmnd data structure.
+ *
+ * This routine delays until the scsi target (aka rport) for the
+ * command exists (is present and logged in) or we declare it non-existent.
+ *
+ * Return code :
+ *  0x2003 - Error
+ *  0x2002 - Success
+ **/
+static int
+lpfc_chk_tgt_mapped(struct lpfc_vport *vport, struct scsi_cmnd *cmnd)
+{
+	struct lpfc_rport_data *rdata = cmnd->device->hostdata;
+	struct lpfc_nodelist *pnode = rdata->pnode;
+	unsigned long later;
+
+	/*
+	 * If target is not in a MAPPED state, delay until
+	 * target is rediscovered or devloss timeout expires.
+	 */
+	later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
+	while (time_after(later, jiffies)) {
+		if (!pnode || !NLP_CHK_NODE_ACT(pnode))
+			return FAILED;
+		if (pnode->nlp_state == NLP_STE_MAPPED_NODE)
+			return SUCCESS;
+		schedule_timeout_uninterruptible(msecs_to_jiffies(500));
+		rdata = cmnd->device->hostdata;
+		if (!rdata)
+			return FAILED;
+		pnode = rdata->pnode;
+	}
+	if (!pnode || !NLP_CHK_NODE_ACT(pnode) ||
+	    (pnode->nlp_state != NLP_STE_MAPPED_NODE))
+		return FAILED;
+	return SUCCESS;
+}
+
+/**
+ * lpfc_reset_flush_io_context -
+ * @vport: The virtual port (scsi_host) for the flush context
+ * @tgt_id: If aborting by Target contect - specifies the target id
+ * @lun_id: If aborting by Lun context - specifies the lun id
+ * @context: specifies the context level to flush at.
+ *
+ * After a reset condition via TMF, we need to flush orphaned i/o
+ * contexts from the adapter. This routine aborts any contexts
+ * outstanding, then waits for their completions. The wait is
+ * bounded by devloss_tmo though.
+ *
+ * Return code :
+ *  0x2003 - Error
+ *  0x2002 - Success
+ **/
+static int
+lpfc_reset_flush_io_context(struct lpfc_vport *vport, uint16_t tgt_id,
+			uint64_t lun_id, lpfc_ctx_cmd context)
+{
+	struct lpfc_hba   *phba = vport->phba;
+	unsigned long later;
+	int cnt;
+
+	cnt = lpfc_sli_sum_iocb(vport, tgt_id, lun_id, context);
 	if (cnt)
 		lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
-				    cmnd->device->id, cmnd->device->lun,
-				    LPFC_CTX_TGT);
+				    tgt_id, lun_id, context);
 	later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
 	while (time_after(later, jiffies) && cnt) {
 		schedule_timeout_uninterruptible(msecs_to_jiffies(20));
-		cnt = lpfc_sli_sum_iocb(vport, cmnd->device->id,
-					cmnd->device->lun, LPFC_CTX_TGT);
+		cnt = lpfc_sli_sum_iocb(vport, tgt_id, lun_id, context);
 	}
 	if (cnt) {
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
-				 "0719 device reset I/O flush failure: "
-				 "cnt x%x\n", cnt);
-		ret = FAILED;
+			"0724 I/O flush failure for context %s : cnt x%x\n",
+			((context == LPFC_CTX_LUN) ? "LUN" :
+			 ((context == LPFC_CTX_TGT) ? "TGT" :
+			  ((context == LPFC_CTX_HOST) ? "HOST" : "Unknown"))),
+			cnt);
+		return FAILED;
 	}
-	return ret;
+	return SUCCESS;
+}
+
+/**
+ * lpfc_device_reset_handler - scsi_host_template eh_device_reset entry point
+ * @cmnd: Pointer to scsi_cmnd data structure.
+ *
+ * This routine does a device reset by sending a LUN_RESET task management
+ * command.
+ *
+ * Return code :
+ *  0x2003 - Error
+ *  0x2002 - Success
+ **/
+static int
+lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
+{
+	struct Scsi_Host  *shost = cmnd->device->host;
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_rport_data *rdata = cmnd->device->hostdata;
+	struct lpfc_nodelist *pnode = rdata->pnode;
+	unsigned tgt_id = cmnd->device->id;
+	unsigned int lun_id = cmnd->device->lun;
+	struct lpfc_scsi_event_header scsi_event;
+	int status;
+
+	lpfc_block_error_handler(cmnd);
+
+	status = lpfc_chk_tgt_mapped(vport, cmnd);
+	if (status == FAILED) {
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+			"0721 Device Reset rport failure: rdata x%p\n", rdata);
+		return FAILED;
+	}
+
+	scsi_event.event_type = FC_REG_SCSI_EVENT;
+	scsi_event.subcategory = LPFC_EVENT_LUNRESET;
+	scsi_event.lun = lun_id;
+	memcpy(scsi_event.wwpn, &pnode->nlp_portname, sizeof(struct lpfc_name));
+	memcpy(scsi_event.wwnn, &pnode->nlp_nodename, sizeof(struct lpfc_name));
+
+	fc_host_post_vendor_event(shost, fc_get_event_number(),
+		sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);
+
+	status = lpfc_send_taskmgmt(vport, rdata, tgt_id, lun_id,
+						FCP_LUN_RESET);
+
+	lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+			 "0713 SCSI layer issued Device Reset (%d, %d) "
+			 "return x%x\n", tgt_id, lun_id, status);
+
+	/*
+	 * We have to clean up i/o as : they may be orphaned by the TMF;
+	 * or if the TMF failed, they may be in an indeterminate state.
+	 * So, continue on.
+	 * We will report success if all the i/o aborts successfully.
+	 */
+	status = lpfc_reset_flush_io_context(vport, tgt_id, lun_id,
+						LPFC_CTX_LUN);
+	return status;
+}
+
+/**
+ * lpfc_target_reset_handler - scsi_host_template eh_target_reset entry point
+ * @cmnd: Pointer to scsi_cmnd data structure.
+ *
+ * This routine does a target reset by sending a TARGET_RESET task management
+ * command.
+ *
+ * Return code :
+ *  0x2003 - Error
+ *  0x2002 - Success
+ **/
+static int
+lpfc_target_reset_handler(struct scsi_cmnd *cmnd)
+{
+	struct Scsi_Host  *shost = cmnd->device->host;
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_rport_data *rdata = cmnd->device->hostdata;
+	struct lpfc_nodelist *pnode = rdata->pnode;
+	unsigned tgt_id = cmnd->device->id;
+	unsigned int lun_id = cmnd->device->lun;
+	struct lpfc_scsi_event_header scsi_event;
+	int status;
+
+	lpfc_block_error_handler(cmnd);
+
+	status = lpfc_chk_tgt_mapped(vport, cmnd);
+	if (status == FAILED) {
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+			"0722 Target Reset rport failure: rdata x%p\n", rdata);
+		return FAILED;
+	}
+
+	scsi_event.event_type = FC_REG_SCSI_EVENT;
+	scsi_event.subcategory = LPFC_EVENT_TGTRESET;
+	scsi_event.lun = 0;
+	memcpy(scsi_event.wwpn, &pnode->nlp_portname, sizeof(struct lpfc_name));
+	memcpy(scsi_event.wwnn, &pnode->nlp_nodename, sizeof(struct lpfc_name));
+
+	fc_host_post_vendor_event(shost, fc_get_event_number(),
+		sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);
+
+	status = lpfc_send_taskmgmt(vport, rdata, tgt_id, lun_id,
+					FCP_TARGET_RESET);
+
+	lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+			 "0723 SCSI layer issued Target Reset (%d, %d) "
+			 "return x%x\n", tgt_id, lun_id, status);
+
+	/*
+	 * We have to clean up i/o as : they may be orphaned by the TMF;
+	 * or if the TMF failed, they may be in an indeterminate state.
+	 * So, continue on.
+	 * We will report success if all the i/o aborts successfully.
+	 */
+	status = lpfc_reset_flush_io_context(vport, tgt_id, lun_id,
+					LPFC_CTX_TGT);
+	return status;
 }
 
 /**
  * lpfc_bus_reset_handler - scsi_host_template eh_bus_reset_handler entry point
  * @cmnd: Pointer to scsi_cmnd data structure.
  *
- * This routine does target reset to all target on @cmnd->device->host.
+ * This routine does target reset to all targets on @cmnd->device->host.
+ * This emulates Parallel SCSI Bus Reset Semantics.
  *
- * Return Code:
- *   0x2003 - Error
- *   0x2002 - Success
+ * Return code :
+ *  0x2003 - Error
+ *  0x2002 - Success
  **/
 static int
 lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
 {
 	struct Scsi_Host  *shost = cmnd->device->host;
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
-	struct lpfc_hba   *phba = vport->phba;
 	struct lpfc_nodelist *ndlp = NULL;
-	int match;
-	int ret = SUCCESS, status = SUCCESS, i;
-	int cnt;
-	struct lpfc_scsi_buf * lpfc_cmd;
-	unsigned long later;
 	struct lpfc_scsi_event_header scsi_event;
+	int match;
+	int ret = SUCCESS, status, i;
 
 	scsi_event.event_type = FC_REG_SCSI_EVENT;
 	scsi_event.subcategory = LPFC_EVENT_BUSRESET;
@@ -3385,13 +3390,11 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
 	memcpy(scsi_event.wwpn, &vport->fc_portname, sizeof(struct lpfc_name));
 	memcpy(scsi_event.wwnn, &vport->fc_nodename, sizeof(struct lpfc_name));
 
-	fc_host_post_vendor_event(shost,
-		fc_get_event_number(),
-		sizeof(scsi_event),
-		(char *)&scsi_event,
-		LPFC_NL_VENDOR_ID);
+	fc_host_post_vendor_event(shost, fc_get_event_number(),
+		sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);
 
 	lpfc_block_error_handler(cmnd);
+
 	/*
 	 * Since the driver manages a single bus device, reset all
 	 * targets known to the driver.  Should any target reset
@@ -3414,16 +3417,11 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
 		spin_unlock_irq(shost->host_lock);
 		if (!match)
 			continue;
-		lpfc_cmd = lpfc_get_scsi_buf(phba);
-		if (lpfc_cmd) {
-			lpfc_cmd->timeout = 60;
-			status = lpfc_scsi_tgt_reset(lpfc_cmd, vport, i,
-						     cmnd->device->lun,
-						     ndlp->rport->dd_data);
-			if (status != TIMEOUT_ERROR)
-				lpfc_release_scsi_buf(phba, lpfc_cmd);
-		}
-		if (!lpfc_cmd || status != SUCCESS) {
+
+		status = lpfc_send_taskmgmt(vport, ndlp->rport->dd_data,
+					i, 0, FCP_TARGET_RESET);
+
+		if (status != SUCCESS) {
 			lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
 					 "0700 Bus Reset on target %d failed\n",
 					 i);
@@ -3431,25 +3429,16 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
 		}
 	}
 	/*
-	 * All outstanding txcmplq I/Os should have been aborted by
-	 * the targets.  Unfortunately, some targets do not abide by
-	 * this forcing the driver to double check.
+	 * We have to clean up i/o as : they may be orphaned by the TMFs
+	 * above; or if any of the TMFs failed, they may be in an
+	 * indeterminate state.
+	 * We will report success if all the i/o aborts successfully.
 	 */
-	cnt = lpfc_sli_sum_iocb(vport, 0, 0, LPFC_CTX_HOST);
-	if (cnt)
-		lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
-				    0, 0, LPFC_CTX_HOST);
-	later = msecs_to_jiffies(2 * vport->cfg_devloss_tmo * 1000) + jiffies;
-	while (time_after(later, jiffies) && cnt) {
-		schedule_timeout_uninterruptible(msecs_to_jiffies(20));
-		cnt = lpfc_sli_sum_iocb(vport, 0, 0, LPFC_CTX_HOST);
-	}
-	if (cnt) {
-		lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
-				 "0715 Bus Reset I/O flush failure: "
-				 "cnt x%x left x%x\n", cnt, i);
+
+	status = lpfc_reset_flush_io_context(vport, 0, 0, LPFC_CTX_HOST);
+	if (status != SUCCESS)
 		ret = FAILED;
-	}
+
 	lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
 			 "0714 SCSI layer issued Bus Reset Data: x%x\n", ret);
 	return ret;
@@ -3582,7 +3571,8 @@ struct scsi_host_template lpfc_template = {
 	.info			= lpfc_info,
 	.queuecommand		= lpfc_queuecommand,
 	.eh_abort_handler	= lpfc_abort_handler,
-	.eh_device_reset_handler= lpfc_device_reset_handler,
+	.eh_device_reset_handler = lpfc_device_reset_handler,
+	.eh_target_reset_handler = lpfc_target_reset_handler,
 	.eh_bus_reset_handler	= lpfc_bus_reset_handler,
 	.slave_alloc		= lpfc_slave_alloc,
 	.slave_configure	= lpfc_slave_configure,
@@ -3602,7 +3592,8 @@ struct scsi_host_template lpfc_vport_template = {
 	.info			= lpfc_info,
 	.queuecommand		= lpfc_queuecommand,
 	.eh_abort_handler	= lpfc_abort_handler,
-	.eh_device_reset_handler= lpfc_device_reset_handler,
+	.eh_device_reset_handler = lpfc_device_reset_handler,
+	.eh_target_reset_handler = lpfc_target_reset_handler,
 	.eh_bus_reset_handler	= lpfc_bus_reset_handler,
 	.slave_alloc		= lpfc_slave_alloc,
 	.slave_configure	= lpfc_slave_configure,
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index ff04daf18f48..acc43b061ba1 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -4139,8 +4139,11 @@ lpfc_sli4_read_fcoe_params(struct lpfc_hba *phba,
 		return -EIO;
 	}
 	data_length = mqe->un.mb_words[5];
-	if (data_length > DMP_FCOEPARAM_RGN_SIZE)
+	if (data_length > DMP_FCOEPARAM_RGN_SIZE) {
+		lpfc_mbuf_free(phba, mp->virt, mp->phys);
+		kfree(mp);
 		return -EIO;
+	}
 
 	lpfc_parse_fcoe_conf(phba, mp->virt, data_length);
 	lpfc_mbuf_free(phba, mp->virt, mp->phys);
@@ -4211,27 +4214,6 @@ lpfc_sli4_read_rev(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
 		return -EIO;
 	}
 
-	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
-			"(%d):0380 Mailbox cmd x%x Status x%x "
-			"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x "
-			"x%x x%x x%x x%x x%x x%x x%x x%x x%x "
-			"CQ: x%x x%x x%x x%x\n",
-			mboxq->vport ? mboxq->vport->vpi : 0,
-			bf_get(lpfc_mqe_command, mqe),
-			bf_get(lpfc_mqe_status, mqe),
-			mqe->un.mb_words[0], mqe->un.mb_words[1],
-			mqe->un.mb_words[2], mqe->un.mb_words[3],
-			mqe->un.mb_words[4], mqe->un.mb_words[5],
-			mqe->un.mb_words[6], mqe->un.mb_words[7],
-			mqe->un.mb_words[8], mqe->un.mb_words[9],
-			mqe->un.mb_words[10], mqe->un.mb_words[11],
-			mqe->un.mb_words[12], mqe->un.mb_words[13],
-			mqe->un.mb_words[14], mqe->un.mb_words[15],
-			mqe->un.mb_words[16], mqe->un.mb_words[50],
-			mboxq->mcqe.word0,
-			mboxq->mcqe.mcqe_tag0, 	mboxq->mcqe.mcqe_tag1,
-			mboxq->mcqe.trailer);
-
 	/*
 	 * The available vpd length cannot be bigger than the
 	 * DMA buffer passed to the port.  Catch the less than
@@ -4337,21 +4319,18 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 		goto out_free_vpd;
 
 	mqe = &mboxq->u.mqe;
-	if ((bf_get(lpfc_mbx_rd_rev_sli_lvl,
-		    &mqe->un.read_rev) != LPFC_SLI_REV4) ||
-	    (bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev) == 0)) {
+	phba->sli_rev = bf_get(lpfc_mbx_rd_rev_sli_lvl, &mqe->un.read_rev);
+	if (bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev))
+		phba->hba_flag |= HBA_FCOE_SUPPORT;
+	if (phba->sli_rev != LPFC_SLI_REV4 ||
+	    !(phba->hba_flag & HBA_FCOE_SUPPORT)) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
 			"0376 READ_REV Error. SLI Level %d "
 			"FCoE enabled %d\n",
-			bf_get(lpfc_mbx_rd_rev_sli_lvl, &mqe->un.read_rev),
-			bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev));
+			phba->sli_rev, phba->hba_flag & HBA_FCOE_SUPPORT);
 		rc = -EIO;
 		goto out_free_vpd;
 	}
-	/* Single threaded at this point, no need for lock */
-	spin_lock_irq(&phba->hbalock);
-	phba->hba_flag |= HBA_FCOE_SUPPORT;
-	spin_unlock_irq(&phba->hbalock);
 	/*
 	 * Evaluate the read rev and vpd data. Populate the driver
 	 * state with the results. If this routine fails, the failure
@@ -4365,8 +4344,32 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 		rc = 0;
 	}
 
-	/* By now, we should determine the SLI revision, hard code for now */
-	phba->sli_rev = LPFC_SLI_REV4;
+	/* Save information as VPD data */
+	phba->vpd.rev.biuRev = mqe->un.read_rev.first_hw_rev;
+	phba->vpd.rev.smRev = mqe->un.read_rev.second_hw_rev;
+	phba->vpd.rev.endecRev = mqe->un.read_rev.third_hw_rev;
+	phba->vpd.rev.fcphHigh = bf_get(lpfc_mbx_rd_rev_fcph_high,
+					 &mqe->un.read_rev);
+	phba->vpd.rev.fcphLow = bf_get(lpfc_mbx_rd_rev_fcph_low,
+				       &mqe->un.read_rev);
+	phba->vpd.rev.feaLevelHigh = bf_get(lpfc_mbx_rd_rev_ftr_lvl_high,
+					    &mqe->un.read_rev);
+	phba->vpd.rev.feaLevelLow = bf_get(lpfc_mbx_rd_rev_ftr_lvl_low,
+					   &mqe->un.read_rev);
+	phba->vpd.rev.sli1FwRev = mqe->un.read_rev.fw_id_rev;
+	memcpy(phba->vpd.rev.sli1FwName, mqe->un.read_rev.fw_name, 16);
+	phba->vpd.rev.sli2FwRev = mqe->un.read_rev.ulp_fw_id_rev;
+	memcpy(phba->vpd.rev.sli2FwName, mqe->un.read_rev.ulp_fw_name, 16);
+	phba->vpd.rev.opFwRev = mqe->un.read_rev.fw_id_rev;
+	memcpy(phba->vpd.rev.opFwName, mqe->un.read_rev.fw_name, 16);
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):0380 READ_REV Status x%x "
+			"fw_rev:%s fcphHi:%x fcphLo:%x flHi:%x flLo:%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0,
+			bf_get(lpfc_mqe_status, mqe),
+			phba->vpd.rev.opFwName,
+			phba->vpd.rev.fcphHigh, phba->vpd.rev.fcphLow,
+			phba->vpd.rev.feaLevelHigh, phba->vpd.rev.feaLevelLow);
 
 	/*
 	 * Discover the port's supported feature set and match it against the
@@ -4491,8 +4494,10 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 		rc = -ENODEV;
 		goto out_free_vpd;
 	}
-	/* Temporary initialization of lpfc_fip_flag to non-fip */
-	bf_set(lpfc_fip_flag, &phba->sli4_hba.sli4_flags, 0);
+	if (phba->cfg_enable_fip)
+		bf_set(lpfc_fip_flag, &phba->sli4_hba.sli4_flags, 1);
+	else
+		bf_set(lpfc_fip_flag, &phba->sli4_hba.sli4_flags, 0);
 
 	/* Set up all the queues to the device */
 	rc = lpfc_sli4_queue_setup(phba);
@@ -5030,6 +5035,92 @@ out_not_finished:
 }
 
 /**
+ * lpfc_sli4_async_mbox_block - Block posting SLI4 asynchronous mailbox command
+ * @phba: Pointer to HBA context object.
+ *
+ * The function blocks the posting of SLI4 asynchronous mailbox commands from
+ * the driver internal pending mailbox queue. It will then try to wait out the
+ * possible outstanding mailbox command before return.
+ *
+ * Returns:
+ * 	0 - the outstanding mailbox command completed; otherwise, the wait for
+ * 	the outstanding mailbox command timed out.
+ **/
+static int
+lpfc_sli4_async_mbox_block(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	uint8_t actcmd = MBX_HEARTBEAT;
+	int rc = 0;
+	unsigned long timeout;
+
+	/* Mark the asynchronous mailbox command posting as blocked */
+	spin_lock_irq(&phba->hbalock);
+	psli->sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
+	if (phba->sli.mbox_active)
+		actcmd = phba->sli.mbox_active->u.mb.mbxCommand;
+	spin_unlock_irq(&phba->hbalock);
+	/* Determine how long we might wait for the active mailbox
+	 * command to be gracefully completed by firmware.
+	 */
+	timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, actcmd) * 1000) +
+				   jiffies;
+	/* Wait for the outstnading mailbox command to complete */
+	while (phba->sli.mbox_active) {
+		/* Check active mailbox complete status every 2ms */
+		msleep(2);
+		if (time_after(jiffies, timeout)) {
+			/* Timeout, marked the outstanding cmd not complete */
+			rc = 1;
+			break;
+		}
+	}
+
+	/* Can not cleanly block async mailbox command, fails it */
+	if (rc) {
+		spin_lock_irq(&phba->hbalock);
+		psli->sli_flag &= ~LPFC_SLI_ASYNC_MBX_BLK;
+		spin_unlock_irq(&phba->hbalock);
+	}
+	return rc;
+}
+
+/**
+ * lpfc_sli4_async_mbox_unblock - Block posting SLI4 async mailbox command
+ * @phba: Pointer to HBA context object.
+ *
+ * The function unblocks and resume posting of SLI4 asynchronous mailbox
+ * commands from the driver internal pending mailbox queue. It makes sure
+ * that there is no outstanding mailbox command before resuming posting
+ * asynchronous mailbox commands. If, for any reason, there is outstanding
+ * mailbox command, it will try to wait it out before resuming asynchronous
+ * mailbox command posting.
+ **/
+static void
+lpfc_sli4_async_mbox_unblock(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+
+	spin_lock_irq(&phba->hbalock);
+	if (!(psli->sli_flag & LPFC_SLI_ASYNC_MBX_BLK)) {
+		/* Asynchronous mailbox posting is not blocked, do nothing */
+		spin_unlock_irq(&phba->hbalock);
+		return;
+	}
+
+	/* Outstanding synchronous mailbox command is guaranteed to be done,
+	 * successful or timeout, after timing-out the outstanding mailbox
+	 * command shall always be removed, so just unblock posting async
+	 * mailbox command and resume
+	 */
+	psli->sli_flag &= ~LPFC_SLI_ASYNC_MBX_BLK;
+	spin_unlock_irq(&phba->hbalock);
+
+	/* wake up worker thread to post asynchronlous mailbox command */
+	lpfc_worker_wake_up(phba);
+}
+
+/**
  * lpfc_sli4_post_sync_mbox - Post an SLI4 mailbox to the bootstrap mailbox
  * @phba: Pointer to HBA context object.
  * @mboxq: Pointer to mailbox object.
@@ -5204,14 +5295,35 @@ lpfc_sli_issue_mbox_s4(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
 					psli->sli_flag, flag);
 		return rc;
 	} else if (flag == MBX_POLL) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
-				"(%d):2542 Mailbox command x%x (x%x) "
-				"cannot issue Data: x%x x%x\n",
+		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+				"(%d):2542 Try to issue mailbox command "
+				"x%x (x%x) synchronously ahead of async"
+				"mailbox command queue: x%x x%x\n",
 				mboxq->vport ? mboxq->vport->vpi : 0,
 				mboxq->u.mb.mbxCommand,
 				lpfc_sli4_mbox_opcode_get(phba, mboxq),
 				psli->sli_flag, flag);
-		return -EIO;
+		/* Try to block the asynchronous mailbox posting */
+		rc = lpfc_sli4_async_mbox_block(phba);
+		if (!rc) {
+			/* Successfully blocked, now issue sync mbox cmd */
+			rc = lpfc_sli4_post_sync_mbox(phba, mboxq);
+			if (rc != MBX_SUCCESS)
+				lpfc_printf_log(phba, KERN_ERR,
+						LOG_MBOX | LOG_SLI,
+						"(%d):2597 Mailbox command "
+						"x%x (x%x) cannot issue "
+						"Data: x%x x%x\n",
+						mboxq->vport ?
+						mboxq->vport->vpi : 0,
+						mboxq->u.mb.mbxCommand,
+						lpfc_sli4_mbox_opcode_get(phba,
+								mboxq),
+						psli->sli_flag, flag);
+			/* Unblock the async mailbox posting afterward */
+			lpfc_sli4_async_mbox_unblock(phba);
+		}
+		return rc;
 	}
 
 	/* Now, interrupt mode asynchrous mailbox command */
@@ -5749,18 +5861,13 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 
 	fip = bf_get(lpfc_fip_flag, &phba->sli4_hba.sli4_flags);
 	/* The fcp commands will set command type */
-	if ((!(iocbq->iocb_flag &  LPFC_IO_FCP)) && (!fip))
-		command_type = ELS_COMMAND_NON_FIP;
-	else if (!(iocbq->iocb_flag &  LPFC_IO_FCP))
-		command_type = ELS_COMMAND_FIP;
-	else if (iocbq->iocb_flag &  LPFC_IO_FCP)
+	if (iocbq->iocb_flag &  LPFC_IO_FCP)
 		command_type = FCP_COMMAND;
-	else {
-		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
-			"2019 Invalid cmd 0x%x\n",
-			iocbq->iocb.ulpCommand);
-		return IOCB_ERROR;
-	}
+	else if (fip && (iocbq->iocb_flag & LPFC_FIP_ELS))
+		command_type = ELS_COMMAND_FIP;
+	else
+		command_type = ELS_COMMAND_NON_FIP;
+
 	/* Some of the fields are in the right position already */
 	memcpy(wqe, &iocbq->iocb, sizeof(union lpfc_wqe));
 	abort_tag = (uint32_t) iocbq->iotag;
@@ -5814,11 +5921,6 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		bf_set(lpfc_wqe_gen_context, &wqe->generic,
 				iocbq->iocb.ulpContext);
 
-		if (iocbq->vport->fc_myDID != 0) {
-			bf_set(els_req64_sid, &wqe->els_req,
-				 iocbq->vport->fc_myDID);
-			bf_set(els_req64_sp, &wqe->els_req, 1);
-		}
 		bf_set(lpfc_wqe_gen_ct, &wqe->generic, ct);
 		bf_set(lpfc_wqe_gen_pu, &wqe->generic, 0);
 		/* CCP CCPE PV PRI in word10 were set in the memcpy */
@@ -5877,14 +5979,19 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		 * is set and we are sending our 2nd or greater command on
 		 * this exchange.
 		 */
+		/* Always open the exchange */
+		bf_set(wqe_xc, &wqe->fcp_iread.wqe_com, 0);
 
-	/* ALLOW read & write to fall through to ICMD64 */
+		wqe->words[10] &= 0xffff0000; /* zero out ebde count */
+		bf_set(lpfc_wqe_gen_pu, &wqe->generic, iocbq->iocb.ulpPU);
+		break;
 	case CMD_FCP_ICMND64_CR:
 		/* Always open the exchange */
 		bf_set(wqe_xc, &wqe->fcp_iread.wqe_com, 0);
 
+		wqe->words[4] = 0;
 		wqe->words[10] &= 0xffff0000; /* zero out ebde count */
-		bf_set(lpfc_wqe_gen_pu, &wqe->generic, iocbq->iocb.ulpPU);
+		bf_set(lpfc_wqe_gen_pu, &wqe->generic, 0);
 	break;
 	case CMD_GEN_REQUEST64_CR:
 		/* word3 command length is described as byte offset to the
@@ -7247,6 +7354,32 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba,
 }
 
 /**
+ * lpfc_chk_iocb_flg - Test IOCB flag with lock held.
+ * @phba: Pointer to HBA context object..
+ * @piocbq: Pointer to command iocb.
+ * @flag: Flag to test.
+ *
+ * This routine grabs the hbalock and then test the iocb_flag to
+ * see if the passed in flag is set.
+ * Returns:
+ * 1 if flag is set.
+ * 0 if flag is not set.
+ **/
+static int
+lpfc_chk_iocb_flg(struct lpfc_hba *phba,
+		 struct lpfc_iocbq *piocbq, uint32_t flag)
+{
+	unsigned long iflags;
+	int ret;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	ret = piocbq->iocb_flag & flag;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	return ret;
+
+}
+
+/**
  * lpfc_sli_issue_iocb_wait - Synchronous function to issue iocb commands
  * @phba: Pointer to HBA context object..
  * @pring: Pointer to sli ring.
@@ -7313,7 +7446,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba,
 	if (retval == IOCB_SUCCESS) {
 		timeout_req = timeout * HZ;
 		timeleft = wait_event_timeout(done_q,
-				piocb->iocb_flag & LPFC_IO_WAKE,
+				lpfc_chk_iocb_flg(phba, piocb, LPFC_IO_WAKE),
 				timeout_req);
 
 		if (piocb->iocb_flag & LPFC_IO_WAKE) {
@@ -7498,20 +7631,16 @@ lpfc_sli_eratt_read(struct lpfc_hba *phba)
 		if ((HS_FFER1 & phba->work_hs) &&
 		    ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
 		     HS_FFER6 | HS_FFER7) & phba->work_hs)) {
-			spin_lock_irq(&phba->hbalock);
 			phba->hba_flag |= DEFER_ERATT;
-			spin_unlock_irq(&phba->hbalock);
 			/* Clear all interrupt enable conditions */
 			writel(0, phba->HCregaddr);
 			readl(phba->HCregaddr);
 		}
 
 		/* Set the driver HA work bitmap */
-		spin_lock_irq(&phba->hbalock);
 		phba->work_ha |= HA_ERATT;
 		/* Indicate polling handles this ERATT */
 		phba->hba_flag |= HBA_ERATT_HANDLED;
-		spin_unlock_irq(&phba->hbalock);
 		return 1;
 	}
 	return 0;
@@ -7557,12 +7686,10 @@ lpfc_sli4_eratt_read(struct lpfc_hba *phba)
 			return 0;
 			phba->work_status[0] = uerr_sta_lo;
 			phba->work_status[1] = uerr_sta_hi;
-			spin_lock_irq(&phba->hbalock);
 			/* Set the driver HA work bitmap */
 			phba->work_ha |= HA_ERATT;
 			/* Indicate polling handles this ERATT */
 			phba->hba_flag |= HBA_ERATT_HANDLED;
-			spin_unlock_irq(&phba->hbalock);
 			return 1;
 		}
 	}
@@ -9245,6 +9372,7 @@ lpfc_sli4_queue_alloc(struct lpfc_hba *phba, uint32_t entry_size,
 			kfree(dmabuf);
 			goto out_fail;
 		}
+		memset(dmabuf->virt, 0, PAGE_SIZE);
 		dmabuf->buffer_tag = x;
 		list_add_tail(&dmabuf->list, &queue->page_list);
 		/* initialize queue's entry array */
@@ -9667,7 +9795,7 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
 	/* link the wq onto the parent cq child list */
 	list_add_tail(&wq->list, &cq->child_list);
 out:
-	if (rc == MBX_TIMEOUT)
+	if (rc != MBX_TIMEOUT)
 		mempool_free(mbox, phba->mbox_mem_pool);
 	return status;
 }
@@ -11020,10 +11148,7 @@ lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page)
 	       rpi_page->start_rpi);
 	hdr_tmpl->rpi_paddr_lo = putPaddrLow(rpi_page->dmabuf->phys);
 	hdr_tmpl->rpi_paddr_hi = putPaddrHigh(rpi_page->dmabuf->phys);
-	if (!phba->sli4_hba.intr_enable)
-		rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
-	else
-		rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
 	shdr = (union lpfc_sli4_cfg_shdr *) &hdr_tmpl->header.cfg_shdr;
 	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
 	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
@@ -11363,6 +11488,7 @@ lpfc_sli4_build_dflt_fcf_record(struct lpfc_hba *phba,
 	bf_set(lpfc_fcf_record_fc_map_1, fcf_record, phba->fc_map[1]);
 	bf_set(lpfc_fcf_record_fc_map_2, fcf_record, phba->fc_map[2]);
 	bf_set(lpfc_fcf_record_fcf_valid, fcf_record, 1);
+	bf_set(lpfc_fcf_record_fcf_avail, fcf_record, 1);
 	bf_set(lpfc_fcf_record_fcf_index, fcf_record, fcf_index);
 	bf_set(lpfc_fcf_record_mac_addr_prov, fcf_record,
 		LPFC_FCF_FPMA | LPFC_FCF_SPMA);
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index 7d37eb7459bf..3c53316cf6d0 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -56,6 +56,7 @@ struct lpfc_iocbq {
 #define LPFC_DRIVER_ABORTED	8	/* driver aborted this request */
 #define LPFC_IO_FABRIC		0x10	/* Iocb send using fabric scheduler */
 #define LPFC_DELAY_MEM_FREE	0x20    /* Defer free'ing of FC data */
+#define LPFC_FIP_ELS		0x40
 
 	uint8_t abort_count;
 	uint8_t rsvd2;
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 5196b46608d7..3b276b47d18f 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -229,7 +229,7 @@ struct lpfc_bmbx {
 
 #define LPFC_EQE_DEF_COUNT	1024
 #define LPFC_CQE_DEF_COUNT      256
-#define LPFC_WQE_DEF_COUNT      64
+#define LPFC_WQE_DEF_COUNT      256
 #define LPFC_MQE_DEF_COUNT      16
 #define LPFC_RQE_DEF_COUNT	512
 
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 6b8a148f0a55..41094e02304b 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "8.3.2"
+#define LPFC_DRIVER_VERSION "8.3.3"
 
 #define LPFC_DRIVER_NAME		"lpfc"
 #define LPFC_SP_DRIVER_HANDLER_NAME	"lpfc:sp"
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index a6313ee84ac5..e0b49922193e 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -695,8 +695,6 @@ lpfc_vport_delete(struct fc_vport *fc_vport)
 		}
 		vport->unreg_vpi_cmpl = VPORT_INVAL;
 		timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
-		if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
-			goto skip_logo;
 		if (!lpfc_issue_els_npiv_logo(vport, ndlp))
 			while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout)
 				timeout = schedule_timeout(timeout);