Fix common misspellings

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>

5 files changed, 19 insertions, 19 deletions

diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_init.h b/drivers/scsi/mpt2sas/mpi/mpi2_init.h
index 20e6b8869341..165454d52591 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_init.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_init.h
@@ -21,7 +21,7 @@
  *  05-21-08  02.00.05  Fixed typo in name of Mpi2SepRequest_t.
  *  10-02-08  02.00.06  Removed Untagged and No Disconnect values from SCSI IO
  *                      Control field Task Attribute flags.
- *                      Moved LUN field defines to mpi2.h becasue they are
+ *                      Moved LUN field defines to mpi2.h because they are
  *                      common to many structures.
  *  05-06-09  02.00.07  Changed task management type of Query Unit Attention to
  *                      Query Asynchronous Event.
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 5e001ffd4c13..3346357031e9 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -925,7 +925,7 @@ _base_interrupt(int irq, void *bus_id)
 }
 
 /**
- * mpt2sas_base_release_callback_handler - clear interupt callback handler
+ * mpt2sas_base_release_callback_handler - clear interrupt callback handler
  * @cb_idx: callback index
  *
  * Return nothing.
@@ -1113,7 +1113,7 @@ _base_restore_msix_table(struct MPT2SAS_ADAPTER *ioc)
  * @ioc: per adapter object
  *
  * Check to see if card is capable of MSIX, and set number
- * of avaliable msix vectors
+ * of available msix vectors
  */
 static int
 _base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc)
@@ -1595,7 +1595,7 @@ mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, u16 handle)
 
 
 /**
- * mpt2sas_base_put_smid_hi_priority - send Task Managment request to firmware
+ * mpt2sas_base_put_smid_hi_priority - send Task Management request to firmware
  * @ioc: per adapter object
  * @smid: system request message index
  *
@@ -2599,7 +2599,7 @@ _base_wait_for_doorbell_int(struct MPT2SAS_ADAPTER *ioc, int timeout,
 		int_status = readl(&ioc->chip->HostInterruptStatus);
 		if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
 			dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-			    "successfull count(%d), timeout(%d)\n", ioc->name,
+			    "successful count(%d), timeout(%d)\n", ioc->name,
 			    __func__, count, timeout));
 			return 0;
 		}
@@ -2640,7 +2640,7 @@ _base_wait_for_doorbell_ack(struct MPT2SAS_ADAPTER *ioc, int timeout,
 		int_status = readl(&ioc->chip->HostInterruptStatus);
 		if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) {
 			dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-			    "successfull count(%d), timeout(%d)\n", ioc->name,
+			    "successful count(%d), timeout(%d)\n", ioc->name,
 			    __func__, count, timeout));
 			return 0;
 		} else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
@@ -2688,7 +2688,7 @@ _base_wait_for_doorbell_not_used(struct MPT2SAS_ADAPTER *ioc, int timeout,
 		doorbell_reg = readl(&ioc->chip->Doorbell);
 		if (!(doorbell_reg & MPI2_DOORBELL_USED)) {
 			dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-			    "successfull count(%d), timeout(%d)\n", ioc->name,
+			    "successful count(%d), timeout(%d)\n", ioc->name,
 			    __func__, count, timeout));
 			return 0;
 		}
diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c
index 6afd67b324fe..6861244249a3 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_config.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_config.c
@@ -93,7 +93,7 @@ struct config_request{
  * @mpi_reply: reply message frame
  * Context: none.
  *
- * Function for displaying debug info helpfull when debugging issues
+ * Function for displaying debug info helpful when debugging issues
  * in this module.
  */
 static void
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index e92b77af5484..1c6d2b405eef 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -116,7 +116,7 @@ _ctl_sas_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
  * @mpi_reply: reply message frame
  * Context: none.
  *
- * Function for displaying debug info helpfull when debugging issues
+ * Function for displaying debug info helpful when debugging issues
  * in this module.
  */
 static void
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 6ceb7759bfe5..d2064a0533ae 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -397,7 +397,7 @@ _scsih_get_sas_address(struct MPT2SAS_ADAPTER *ioc, u16 handle,
  * @is_raid: [flag] 1 = raid object, 0 = sas object
  *
  * Determines whether this device should be first reported device to
- * to scsi-ml or sas transport, this purpose is for persistant boot device.
+ * to scsi-ml or sas transport, this purpose is for persistent boot device.
  * There are primary, alternate, and current entries in bios page 2. The order
  * priority is primary, alternate, then current.  This routine saves
  * the corresponding device object and is_raid flag in the ioc object.
@@ -2671,10 +2671,10 @@ _scsih_block_io_to_children_attached_directly(struct MPT2SAS_ADAPTER *ioc,
  * @handle: device handle
  * Context: interrupt time.
  *
- * This code is to initiate the device removal handshake protocal
+ * This code is to initiate the device removal handshake protocol
  * with controller firmware.  This function will issue target reset
  * using high priority request queue.  It will send a sas iounit
- * controll request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion.
+ * control request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion.
  *
  * This is designed to send muliple task management request at the same
  * time to the fifo. If the fifo is full, we will append the request,
@@ -2749,9 +2749,9 @@ _scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle)
  * @reply: reply message frame(lower 32bit addr)
  * Context: interrupt time.
  *
- * This is the sas iounit controll completion routine.
+ * This is the sas iounit control completion routine.
  * This code is part of the code to initiate the device removal
- * handshake protocal with controller firmware.
+ * handshake protocol with controller firmware.
  *
  * Return 1 meaning mf should be freed from _base_interrupt
  *        0 means the mf is freed from this function.
@@ -2878,8 +2878,8 @@ _scsih_tm_volume_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid,
  *
  * This is the target reset completion routine.
  * This code is part of the code to initiate the device removal
- * handshake protocal with controller firmware.
- * It will send a sas iounit controll request (MPI2_SAS_OP_REMOVE_DEVICE)
+ * handshake protocol with controller firmware.
+ * It will send a sas iounit control request (MPI2_SAS_OP_REMOVE_DEVICE)
  *
  * Return 1 meaning mf should be freed from _base_interrupt
  *        0 means the mf is freed from this function.
@@ -2984,7 +2984,7 @@ _scsih_check_for_pending_tm(struct MPT2SAS_ADAPTER *ioc, u16 smid)
  *
  * This routine added to better handle cable breaker.
  *
- * This handles the case where driver recieves multiple expander
+ * This handles the case where driver receives multiple expander
  * add and delete events in a single shot.  When there is a delete event
  * the routine will void any pending add events waiting in the event queue.
  *
@@ -3511,7 +3511,7 @@ _scsih_normalize_sense(char *sense_buffer, struct sense_info *data)
 
 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 /**
- * _scsih_scsi_ioc_info - translated non-successfull SCSI_IO request
+ * _scsih_scsi_ioc_info - translated non-successful SCSI_IO request
  * @ioc: per adapter object
  * @scmd: pointer to scsi command object
  * @mpi_reply: reply mf payload returned from firmware
@@ -5138,7 +5138,7 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc,
 	unsigned long flags;
 	int r;
 
-	dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "broadcast primative: "
+	dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "broadcast primitive: "
 	    "phy number(%d), width(%d)\n", ioc->name, event_data->PhyNum,
 	    event_data->PortWidth));
 	dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,