scsi: mpt3sas: Transition IOC to Ready state during shutdown

The IOC firmware assumes that the host driver is still alive after shutdown
and continues to post events to host memory (due to faulty expander phy
links, etc). This leads to 0x2666 (a bus fault occurred during a host-IOC
memory access).

Perform an IOC soft reset as part of shutdown to disable event posting.

Link: https://lore.kernel.org/r/20210705145951.32258-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 16 insertions, 16 deletions

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index c39955239d1c..19b1c0cf5f2a 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -2983,13 +2983,13 @@ _base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc)
 }
 
 /**
- * _base_free_irq - free irq
+ * mpt3sas_base_free_irq - free irq
  * @ioc: per adapter object
  *
  * Freeing respective reply_queue from the list.
  */
-static void
-_base_free_irq(struct MPT3SAS_ADAPTER *ioc)
+void
+mpt3sas_base_free_irq(struct MPT3SAS_ADAPTER *ioc)
 {
 	struct adapter_reply_queue *reply_q, *next;
 
@@ -3191,12 +3191,12 @@ _base_check_and_enable_high_iops_queues(struct MPT3SAS_ADAPTER *ioc,
 }
 
 /**
- * _base_disable_msix - disables msix
+ * mpt3sas_base_disable_msix - disables msix
  * @ioc: per adapter object
  *
  */
-static void
-_base_disable_msix(struct MPT3SAS_ADAPTER *ioc)
+void
+mpt3sas_base_disable_msix(struct MPT3SAS_ADAPTER *ioc)
 {
 	if (!ioc->msix_enable)
 		return;
@@ -3304,8 +3304,8 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc)
 	for (i = 0; i < ioc->reply_queue_count; i++) {
 		r = _base_request_irq(ioc, i);
 		if (r) {
-			_base_free_irq(ioc);
-			_base_disable_msix(ioc);
+			mpt3sas_base_free_irq(ioc);
+			mpt3sas_base_disable_msix(ioc);
 			goto try_ioapic;
 		}
 	}
@@ -3342,8 +3342,8 @@ mpt3sas_base_unmap_resources(struct MPT3SAS_ADAPTER *ioc)
 
 	dexitprintk(ioc, ioc_info(ioc, "%s\n", __func__));
 
-	_base_free_irq(ioc);
-	_base_disable_msix(ioc);
+	mpt3sas_base_free_irq(ioc);
+	mpt3sas_base_disable_msix(ioc);
 
 	kfree(ioc->replyPostRegisterIndex);
 	ioc->replyPostRegisterIndex = NULL;
@@ -7613,14 +7613,14 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc)
 }
 
 /**
- * _base_make_ioc_ready - put controller in READY state
+ * mpt3sas_base_make_ioc_ready - put controller in READY state
  * @ioc: per adapter object
  * @type: FORCE_BIG_HAMMER or SOFT_RESET
  *
  * Return: 0 for success, non-zero for failure.
  */
-static int
-_base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, enum reset_type type)
+int
+mpt3sas_base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, enum reset_type type)
 {
 	u32 ioc_state;
 	int rc;
@@ -7897,7 +7897,7 @@ mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc)
 	if (ioc->chip_phys && ioc->chip) {
 		mpt3sas_base_mask_interrupts(ioc);
 		ioc->shost_recovery = 1;
-		_base_make_ioc_ready(ioc, SOFT_RESET);
+		mpt3sas_base_make_ioc_ready(ioc, SOFT_RESET);
 		ioc->shost_recovery = 0;
 	}
 
@@ -8017,7 +8017,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
 	ioc->build_sg_mpi = &_base_build_sg;
 	ioc->build_zero_len_sge_mpi = &_base_build_zero_len_sge;
 
-	r = _base_make_ioc_ready(ioc, SOFT_RESET);
+	r = mpt3sas_base_make_ioc_ready(ioc, SOFT_RESET);
 	if (r)
 		goto out_free_resources;
 
@@ -8471,7 +8471,7 @@ mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc,
 	_base_pre_reset_handler(ioc);
 	mpt3sas_wait_for_commands_to_complete(ioc);
 	mpt3sas_base_mask_interrupts(ioc);
-	r = _base_make_ioc_ready(ioc, type);
+	r = mpt3sas_base_make_ioc_ready(ioc, type);
 	if (r)
 		goto out;
 	_base_clear_outstanding_commands(ioc);