[SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type

These enums have been separate since the dawn of SAS, mainly because the
latter is a procotol only enum and the former includes additional state
for libsas.  The dichotomy causes endless confusion about which one you
should use where and leads to pointless warnings like this:

drivers/scsi/mvsas/mv_sas.c: In function 'mvs_update_phyinfo':
drivers/scsi/mvsas/mv_sas.c:1162:34: warning: comparison between 'enum sas_device_type' and 'enum sas_dev_type' [-Wenum-compare]

Fix by eliminating one of them.  The one kept is effectively the sas.h
one, but call it sas_device_type and make sure the enums are all
properly namespaced with the SAS_ prefix.

Signed-off-by: James Bottomley <JBottomley@Parallels.com>

5 files changed, 25 insertions, 25 deletions

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 95d04cc78c0b..69dd49c05f1e 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1505,7 +1505,7 @@ void pm8001_work_fn(struct work_struct *work)
 	pm8001_dev = pw->data; /* Most stash device structure */
 	if ((pm8001_dev == NULL)
 	 || ((pw->handler != IO_XFER_ERROR_BREAK)
-	  && (pm8001_dev->dev_type == NO_DEVICE))) {
+	  && (pm8001_dev->dev_type == SAS_PHY_UNUSED))) {
 		kfree(pw);
 		return;
 	}
@@ -3443,7 +3443,7 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		sizeof(struct dev_to_host_fis));
 	phy->frame_rcvd_size = sizeof(struct dev_to_host_fis);
 	phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
-	phy->identify.device_type = SATA_DEV;
+	phy->identify.device_type = SAS_SATA_DEV;
 	pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
 	spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
 	pm8001_bytes_dmaed(pm8001_ha, phy_id);
@@ -4465,7 +4465,7 @@ pm8001_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id)
 	payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE |
 		LINKMODE_AUTO |	LINKRATE_15 |
 		LINKRATE_30 | LINKRATE_60 | phy_id);
-	payload.sas_identify.dev_type = SAS_END_DEV;
+	payload.sas_identify.dev_type = SAS_END_DEVICE;
 	payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL;
 	memcpy(payload.sas_identify.sas_addr,
 		pm8001_ha->sas_addr, SAS_ADDR_SIZE);
@@ -4527,11 +4527,11 @@ static int pm8001_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
 	if (flag == 1)
 		stp_sspsmp_sata = 0x02; /*direct attached sata */
 	else {
-		if (pm8001_dev->dev_type == SATA_DEV)
+		if (pm8001_dev->dev_type == SAS_SATA_DEV)
 			stp_sspsmp_sata = 0x00; /* stp*/
-		else if (pm8001_dev->dev_type == SAS_END_DEV ||
-			pm8001_dev->dev_type == EDGE_DEV ||
-			pm8001_dev->dev_type == FANOUT_DEV)
+		else if (pm8001_dev->dev_type == SAS_END_DEVICE ||
+			pm8001_dev->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+			pm8001_dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
 			stp_sspsmp_sata = 0x01; /*ssp or smp*/
 	}
 	if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))
@@ -4662,9 +4662,9 @@ int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha,
 	PM8001_EH_DBG(pm8001_ha,
 		pm8001_printk("cmd_tag = %x, abort task tag = 0x%x",
 			cmd_tag, task_tag));
-	if (pm8001_dev->dev_type == SAS_END_DEV)
+	if (pm8001_dev->dev_type == SAS_END_DEVICE)
 		opc = OPC_INB_SSP_ABORT;
-	else if (pm8001_dev->dev_type == SATA_DEV)
+	else if (pm8001_dev->dev_type == SAS_SATA_DEV)
 		opc = OPC_INB_SATA_ABORT;
 	else
 		opc = OPC_INB_SMP_ABORT;/* SMP */
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 1c718520036a..e4b9bc7f5410 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -361,7 +361,7 @@ static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
 
 	pm8001_ha->devices = pm8001_ha->memoryMap.region[DEV_MEM].virt_ptr;
 	for (i = 0; i < PM8001_MAX_DEVICES; i++) {
-		pm8001_ha->devices[i].dev_type = NO_DEVICE;
+		pm8001_ha->devices[i].dev_type = SAS_PHY_UNUSED;
 		pm8001_ha->devices[i].id = i;
 		pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES;
 		pm8001_ha->devices[i].running_req = 0;
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 9af95853f840..a85d73de7c80 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -357,7 +357,7 @@ static int sas_find_local_port_id(struct domain_device *dev)
   * @tmf: the task management IU
   */
 #define DEV_IS_GONE(pm8001_dev)	\
-	((!pm8001_dev || (pm8001_dev->dev_type == NO_DEVICE)))
+	((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)))
 static int pm8001_task_exec(struct sas_task *task, const int num,
 	gfp_t gfp_flags, int is_tmf, struct pm8001_tmf_task *tmf)
 {
@@ -375,7 +375,7 @@ static int pm8001_task_exec(struct sas_task *task, const int num,
 		struct task_status_struct *tsm = &t->task_status;
 		tsm->resp = SAS_TASK_UNDELIVERED;
 		tsm->stat = SAS_PHY_DOWN;
-		if (dev->dev_type != SATA_DEV)
+		if (dev->dev_type != SAS_SATA_DEV)
 			t->task_done(t);
 		return 0;
 	}
@@ -553,7 +553,7 @@ struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha)
 {
 	u32 dev;
 	for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
-		if (pm8001_ha->devices[dev].dev_type == NO_DEVICE) {
+		if (pm8001_ha->devices[dev].dev_type == SAS_PHY_UNUSED) {
 			pm8001_ha->devices[dev].id = dev;
 			return &pm8001_ha->devices[dev];
 		}
@@ -589,7 +589,7 @@ static void pm8001_free_dev(struct pm8001_device *pm8001_dev)
 	u32 id = pm8001_dev->id;
 	memset(pm8001_dev, 0, sizeof(*pm8001_dev));
 	pm8001_dev->id = id;
-	pm8001_dev->dev_type = NO_DEVICE;
+	pm8001_dev->dev_type = SAS_PHY_UNUSED;
 	pm8001_dev->device_id = PM8001_MAX_DEVICES;
 	pm8001_dev->sas_device = NULL;
 }
@@ -647,7 +647,7 @@ static int pm8001_dev_found_notify(struct domain_device *dev)
 			res = -1;
 		}
 	} else {
-		if (dev->dev_type == SATA_DEV) {
+		if (dev->dev_type == SAS_SATA_DEV) {
 			pm8001_device->attached_phy =
 				dev->rphy->identify.phy_identifier;
 				flag = 1; /* directly sata*/
@@ -657,7 +657,7 @@ static int pm8001_dev_found_notify(struct domain_device *dev)
 	PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag);
 	spin_unlock_irqrestore(&pm8001_ha->lock, flags);
 	wait_for_completion(&completion);
-	if (dev->dev_type == SAS_END_DEV)
+	if (dev->dev_type == SAS_END_DEVICE)
 		msleep(50);
 	pm8001_ha->flags = PM8001F_RUN_TIME;
 	return 0;
@@ -927,7 +927,7 @@ void pm8001_open_reject_retry(
 		struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[i];
 
 		pm8001_dev = ccb->device;
-		if (!pm8001_dev || (pm8001_dev->dev_type == NO_DEVICE))
+		if (!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED))
 			continue;
 		if (!device_to_close) {
 			uintptr_t d = (uintptr_t)pm8001_dev
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 72d46ea398dc..570819464d90 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -103,7 +103,7 @@ do {						\
 #define PM8001_READ_VPD
 
 
-#define DEV_IS_EXPANDER(type)	((type == EDGE_DEV) || (type == FANOUT_DEV))
+#define DEV_IS_EXPANDER(type)	((type == SAS_EDGE_EXPANDER_DEVICE) || (type == SAS_FANOUT_EXPANDER_DEVICE))
 
 #define PM8001_NAME_LENGTH		32/* generic length of strings */
 extern struct list_head hba_list;
@@ -206,7 +206,7 @@ struct pm8001_phy {
 };
 
 struct pm8001_device {
-	enum sas_dev_type	dev_type;
+	enum sas_device_type	dev_type;
 	struct domain_device	*sas_device;
 	u32			attached_phy;
 	u32			id;
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 670998a8ca79..302514d8157b 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -2684,7 +2684,7 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
 		sizeof(struct dev_to_host_fis));
 	phy->frame_rcvd_size = sizeof(struct dev_to_host_fis);
 	phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
-	phy->identify.device_type = SATA_DEV;
+	phy->identify.device_type = SAS_SATA_DEV;
 	pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
 	spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
 	pm8001_bytes_dmaed(pm8001_ha, phy_id);
@@ -3952,7 +3952,7 @@ pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id)
 	Have to add "SAS PHY Analog Setup SPASTI 1 Byte" Based on need
 	**/
 
-	payload.sas_identify.dev_type = SAS_END_DEV;
+	payload.sas_identify.dev_type = SAS_END_DEVICE;
 	payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL;
 	memcpy(payload.sas_identify.sas_addr,
 		pm8001_ha->sas_addr, SAS_ADDR_SIZE);
@@ -4015,11 +4015,11 @@ static int pm80xx_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
 	if (flag == 1) {
 		stp_sspsmp_sata = 0x02; /*direct attached sata */
 	} else {
-		if (pm8001_dev->dev_type == SATA_DEV)
+		if (pm8001_dev->dev_type == SAS_SATA_DEV)
 			stp_sspsmp_sata = 0x00; /* stp*/
-		else if (pm8001_dev->dev_type == SAS_END_DEV ||
-			pm8001_dev->dev_type == EDGE_DEV ||
-			pm8001_dev->dev_type == FANOUT_DEV)
+		else if (pm8001_dev->dev_type == SAS_END_DEVICE ||
+			pm8001_dev->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
+			pm8001_dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
 			stp_sspsmp_sata = 0x01; /*ssp or smp*/
 	}
 	if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))