Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] qla1280: retain firmware for error recovery
  [SCSI] attirbute_container: Initialize sysfs attributes with sysfs_attr_init
  [SCSI] advansys: fix regression with request_firmware change
  [SCSI] qla2xxx: Updated version number to 8.03.02-k2.
  [SCSI] qla2xxx: Prevent sending mbx commands from sysfs during isp reset.
  [SCSI] qla2xxx: Disable MSI on qla24xx chips other than QLA2432.
  [SCSI] qla2xxx: Check to make sure multique and CPU affinity support is not enabled at the same time.
  [SCSI] qla2xxx: Correct vp_idx checking during PORT_UPDATE processing.
  [SCSI] qla2xxx: Honour "Extended BB credits" bit for CNAs.
  [SCSI] scsi_transport_fc: Make sure commands are completed when rport is offline
  [SCSI] libiscsi: Fix recovery slowdown regression

1 files changed, 109 insertions, 52 deletions

diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 8ef87781e51d..b8166ecfd0e3 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -17,9 +17,11 @@
 * General Public License for more details.
 *
 ******************************************************************************/
-#define QLA1280_VERSION      "3.27"
+#define QLA1280_VERSION      "3.27.1"
 /*****************************************************************************
     Revision History:
+    Rev  3.27.1, February 8, 2010, Michael Reed
+	- Retain firmware image for error recovery.
     Rev  3.27, February 10, 2009, Michael Reed
 	- General code cleanup.
 	- Improve error recovery.
@@ -537,9 +539,9 @@ __setup("qla1280=", qla1280_setup);
 /*****************************************/
 
 struct qla_boards {
-	unsigned char name[9];	/* Board ID String */
+	char *name;		/* Board ID String */
 	int numPorts;		/* Number of SCSI ports */
-	char *fwname;		/* firmware name        */
+	int fw_index;		/* index into qla1280_fw_tbl for firmware */
 };
 
 /* NOTE: the last argument in each entry is used to index ql1280_board_tbl */
@@ -560,15 +562,30 @@ static struct pci_device_id qla1280_pci_tbl[] = {
 };
 MODULE_DEVICE_TABLE(pci, qla1280_pci_tbl);
 
+DEFINE_MUTEX(qla1280_firmware_mutex);
+
+struct qla_fw {
+	char *fwname;
+	const struct firmware *fw;
+};
+
+#define QL_NUM_FW_IMAGES 3
+
+struct qla_fw qla1280_fw_tbl[QL_NUM_FW_IMAGES] = {
+	{"qlogic/1040.bin",  NULL},	/* image 0 */
+	{"qlogic/1280.bin",  NULL},	/* image 1 */
+	{"qlogic/12160.bin", NULL},	/* image 2 */
+};
+
+/* NOTE: Order of boards in this table must match order in qla1280_pci_tbl */
 static struct qla_boards ql1280_board_tbl[] = {
-	/* Name ,  Number of ports, FW details */
-	{"QLA12160",	2, "qlogic/12160.bin"},
-	{"QLA1040",	1, "qlogic/1040.bin"},
-	{"QLA1080",	1, "qlogic/1280.bin"},
-	{"QLA1240",	2, "qlogic/1280.bin"},
-	{"QLA1280",	2, "qlogic/1280.bin"},
-	{"QLA10160",	1, "qlogic/12160.bin"},
-	{"        ",	0, "   "},
+	{.name = "QLA12160", .numPorts = 2, .fw_index = 2},
+	{.name = "QLA1040" , .numPorts = 1, .fw_index = 0},
+	{.name = "QLA1080" , .numPorts = 1, .fw_index = 1},
+	{.name = "QLA1240" , .numPorts = 2, .fw_index = 1},
+	{.name = "QLA1280" , .numPorts = 2, .fw_index = 1},
+	{.name = "QLA10160", .numPorts = 1, .fw_index = 2},
+	{.name = "        ", .numPorts = 0, .fw_index = -1},
 };
 
 static int qla1280_verbose = 1;
@@ -1511,6 +1528,63 @@ qla1280_initialize_adapter(struct scsi_qla_host *ha)
 }
 
 /*
+ * qla1280_request_firmware
+ *      Acquire firmware for chip.  Retain in memory
+ *      for error recovery.
+ *
+ * Input:
+ *      ha = adapter block pointer.
+ *
+ * Returns:
+ *      Pointer to firmware image or an error code
+ *      cast to pointer via ERR_PTR().
+ */
+static const struct firmware *
+qla1280_request_firmware(struct scsi_qla_host *ha)
+{
+	const struct firmware *fw;
+	int err;
+	int index;
+	char *fwname;
+
+	spin_unlock_irq(ha->host->host_lock);
+	mutex_lock(&qla1280_firmware_mutex);
+
+	index = ql1280_board_tbl[ha->devnum].fw_index;
+	fw = qla1280_fw_tbl[index].fw;
+	if (fw)
+		goto out;
+
+	fwname = qla1280_fw_tbl[index].fwname;
+	err = request_firmware(&fw, fwname, &ha->pdev->dev);
+
+	if (err) {
+		printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
+		       fwname, err);
+		fw = ERR_PTR(err);
+		goto unlock;
+	}
+	if ((fw->size % 2) || (fw->size < 6)) {
+		printk(KERN_ERR "Invalid firmware length %zu in image \"%s\"\n",
+		       fw->size, fwname);
+		release_firmware(fw);
+		fw = ERR_PTR(-EINVAL);
+		goto unlock;
+	}
+
+	qla1280_fw_tbl[index].fw = fw;
+
+ out:
+	ha->fwver1 = fw->data[0];
+	ha->fwver2 = fw->data[1];
+	ha->fwver3 = fw->data[2];
+ unlock:
+	mutex_unlock(&qla1280_firmware_mutex);
+	spin_lock_irq(ha->host->host_lock);
+	return fw;
+}
+
+/*
  * Chip diagnostics
  *      Test chip for proper operation.
  *
@@ -1633,30 +1707,18 @@ qla1280_chip_diag(struct scsi_qla_host *ha)
 static int
 qla1280_load_firmware_pio(struct scsi_qla_host *ha)
 {
+	/* enter with host_lock acquired */
+
 	const struct firmware *fw;
 	const __le16 *fw_data;
 	uint16_t risc_address, risc_code_size;
 	uint16_t mb[MAILBOX_REGISTER_COUNT], i;
-	int err;
+	int err = 0;
+
+	fw = qla1280_request_firmware(ha);
+	if (IS_ERR(fw))
+		return PTR_ERR(fw);
 
-	spin_unlock_irq(ha->host->host_lock);
-	err = request_firmware(&fw, ql1280_board_tbl[ha->devnum].fwname,
-			       &ha->pdev->dev);
-	spin_lock_irq(ha->host->host_lock);
-	if (err) {
-		printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
-		       ql1280_board_tbl[ha->devnum].fwname, err);
-		return err;
-	}
-	if ((fw->size % 2) || (fw->size < 6)) {
-		printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
-		       fw->size, ql1280_board_tbl[ha->devnum].fwname);
-		err = -EINVAL;
-		goto out;
-	}
-	ha->fwver1 = fw->data[0];
-	ha->fwver2 = fw->data[1];
-	ha->fwver3 = fw->data[2];
 	fw_data = (const __le16 *)&fw->data[0];
 	ha->fwstart = __le16_to_cpu(fw_data[2]);
 
@@ -1674,11 +1736,10 @@ qla1280_load_firmware_pio(struct scsi_qla_host *ha)
 		if (err) {
 			printk(KERN_ERR "scsi(%li): Failed to load firmware\n",
 					ha->host_no);
-			goto out;
+			break;
 		}
 	}
-out:
-	release_firmware(fw);
+
 	return err;
 }
 
@@ -1686,6 +1747,7 @@ out:
 static int
 qla1280_load_firmware_dma(struct scsi_qla_host *ha)
 {
+	/* enter with host_lock acquired */
 	const struct firmware *fw;
 	const __le16 *fw_data;
 	uint16_t risc_address, risc_code_size;
@@ -1700,24 +1762,10 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
 		return -ENOMEM;
 #endif
 
-	spin_unlock_irq(ha->host->host_lock);
-	err = request_firmware(&fw, ql1280_board_tbl[ha->devnum].fwname,
-			       &ha->pdev->dev);
-	spin_lock_irq(ha->host->host_lock);
-	if (err) {
-		printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
-		       ql1280_board_tbl[ha->devnum].fwname, err);
-		return err;
-	}
-	if ((fw->size % 2) || (fw->size < 6)) {
-		printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
-		       fw->size, ql1280_board_tbl[ha->devnum].fwname);
-		err = -EINVAL;
-		goto out;
-	}
-	ha->fwver1 = fw->data[0];
-	ha->fwver2 = fw->data[1];
-	ha->fwver3 = fw->data[2];
+	fw = qla1280_request_firmware(ha);
+	if (IS_ERR(fw))
+		return PTR_ERR(fw);
+
 	fw_data = (const __le16 *)&fw->data[0];
 	ha->fwstart = __le16_to_cpu(fw_data[2]);
 
@@ -1802,7 +1850,6 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
 #if DUMP_IT_BACK
 	pci_free_consistent(ha->pdev, 8000, tbuf, p_tbuf);
 #endif
-	release_firmware(fw);
 	return err;
 }
 
@@ -1841,6 +1888,7 @@ qla1280_start_firmware(struct scsi_qla_host *ha)
 static int
 qla1280_load_firmware(struct scsi_qla_host *ha)
 {
+	/* enter with host_lock taken */
 	int err;
 
 	err = qla1280_chip_diag(ha);
@@ -4419,7 +4467,16 @@ qla1280_init(void)
 static void __exit
 qla1280_exit(void)
 {
+	int i;
+
 	pci_unregister_driver(&qla1280_pci_driver);
+	/* release any allocated firmware images */
+	for (i = 0; i < QL_NUM_FW_IMAGES; i++) {
+		if (qla1280_fw_tbl[i].fw) {
+			release_firmware(qla1280_fw_tbl[i].fw);
+			qla1280_fw_tbl[i].fw = NULL;
+		}
+	}
 }
 
 module_init(qla1280_init);