Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

Pull SCSI target updates from Nicholas Bellinger:
 "The highlights this round include:

   - Introduce configfs support for unlocked configfs_depend_item()
     (krzysztof + andrezej)
   - Conversion of usb-gadget target driver to new function registration
     interface (andrzej + sebastian)
   - Enable qla2xxx FC target mode support for Extended Logins (himansu +
     giridhar)
   - Enable qla2xxx FC target mode support for Exchange Offload (himansu +
     giridhar)
   - Add qla2xxx FC target mode irq affinity notification + selective
     command queuing.  (quinn + himanshu)
   - Fix iscsi-target deadlock in se_node_acl configfs deletion (sagi +
     nab)
   - Convert se_node_acl configfs deletion + se_node_acl->queue_depth to
     proper se_session->sess_kref + target_get_session() usage.  (hch +
     sagi + nab)
   - Fix long-standing race between se_node_acl->acl_kref get and
     get_initiator_node_acl() lookup.  (hch + nab)
   - Fix target/user block-size handling, and make sure netlink reaches
     all network namespaces (sheng + andy)

  Note there is an outstanding bug-fix series for remote I_T nexus port
  TMR LUN_RESET has been posted and still being tested, and will likely
  become post -rc1 material at this point"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (56 commits)
  scsi: qla2xxxx: avoid type mismatch in comparison
  target/user: Make sure netlink would reach all network namespaces
  target: Obtain se_node_acl->acl_kref during get_initiator_node_acl
  target: Convert ACL change queue_depth se_session reference usage
  iscsi-target: Fix potential dead-lock during node acl delete
  ib_srpt: Convert acl lookup to modern get_initiator_node_acl usage
  tcm_fc: Convert acl lookup to modern get_initiator_node_acl usage
  tcm_fc: Wait for command completion before freeing a session
  target: Fix a memory leak in target_dev_lba_map_store()
  target: Support aborting tasks with a 64-bit tag
  usb/gadget: Remove set-but-not-used variables
  target: Remove an unused variable
  target: Fix indentation in target_core_configfs.c
  target/user: Allow user to set block size before enabling device
  iser-target: Fix non negative ERR_PTR isert_device_get usage
  target/fcoe: Add tag support to tcm_fc
  qla2xxx: Check for online flag instead of active reset when transmitting responses
  qla2xxx: Set all queues to 4k
  qla2xxx: Disable ZIO at start time.
  qla2xxx: Move atioq to a different lock to reduce lock contention
  ...

1 files changed, 162 insertions, 3 deletions

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 6be32fdab365..f1788db43195 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -221,6 +221,18 @@ MODULE_PARM_DESC(ql2xmdenable,
 		"0 - MiniDump disabled. "
 		"1 (Default) - MiniDump enabled.");
 
+int ql2xexlogins = 0;
+module_param(ql2xexlogins, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(ql2xexlogins,
+		 "Number of extended Logins. "
+		 "0 (Default)- Disabled.");
+
+int ql2xexchoffld = 0;
+module_param(ql2xexchoffld, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(ql2xexchoffld,
+		 "Number of exchanges to offload. "
+		 "0 (Default)- Disabled.");
+
 /*
  * SCSI host template entry points
  */
@@ -2324,6 +2336,9 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	ha->tgt.enable_class_2 = ql2xenableclass2;
 	INIT_LIST_HEAD(&ha->tgt.q_full_list);
 	spin_lock_init(&ha->tgt.q_full_lock);
+	spin_lock_init(&ha->tgt.sess_lock);
+	spin_lock_init(&ha->tgt.atio_lock);
+
 
 	/* Clear our data area */
 	ha->bars = bars;
@@ -2468,7 +2483,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400;
 		ha->mbx_count = MAILBOX_REGISTER_COUNT;
 		req_length = REQUEST_ENTRY_CNT_83XX;
-		rsp_length = RESPONSE_ENTRY_CNT_2300;
+		rsp_length = RESPONSE_ENTRY_CNT_83XX;
 		ha->tgt.atio_q_length = ATIO_ENTRY_CNT_24XX;
 		ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
 		ha->init_cb_size = sizeof(struct mid_init_cb_81xx);
@@ -2498,8 +2513,8 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		ha->portnum = PCI_FUNC(ha->pdev->devfn);
 		ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400;
 		ha->mbx_count = MAILBOX_REGISTER_COUNT;
-		req_length = REQUEST_ENTRY_CNT_24XX;
-		rsp_length = RESPONSE_ENTRY_CNT_2300;
+		req_length = REQUEST_ENTRY_CNT_83XX;
+		rsp_length = RESPONSE_ENTRY_CNT_83XX;
 		ha->tgt.atio_q_length = ATIO_ENTRY_CNT_24XX;
 		ha->max_loop_id = SNS_LAST_LOOP_ID_2300;
 		ha->init_cb_size = sizeof(struct mid_init_cb_81xx);
@@ -3128,6 +3143,14 @@ qla2x00_remove_one(struct pci_dev *pdev)
 
 	base_vha->flags.online = 0;
 
+	/* free DMA memory */
+	if (ha->exlogin_buf)
+		qla2x00_free_exlogin_buffer(ha);
+
+	/* free DMA memory */
+	if (ha->exchoffld_buf)
+		qla2x00_free_exchoffld_buffer(ha);
+
 	qla2x00_destroy_deferred_work(ha);
 
 	qlt_remove_target(ha, base_vha);
@@ -3587,6 +3610,140 @@ fail:
 	return -ENOMEM;
 }
 
+int
+qla2x00_set_exlogins_buffer(scsi_qla_host_t *vha)
+{
+	int rval;
+	uint16_t	size, max_cnt, temp;
+	struct qla_hw_data *ha = vha->hw;
+
+	/* Return if we don't need to alloacate any extended logins */
+	if (!ql2xexlogins)
+		return QLA_SUCCESS;
+
+	ql_log(ql_log_info, vha, 0xd021, "EXLOGIN count: %d.\n", ql2xexlogins);
+	max_cnt = 0;
+	rval = qla_get_exlogin_status(vha, &size, &max_cnt);
+	if (rval != QLA_SUCCESS) {
+		ql_log_pci(ql_log_fatal, ha->pdev, 0xd029,
+		    "Failed to get exlogin status.\n");
+		return rval;
+	}
+
+	temp = (ql2xexlogins > max_cnt) ? max_cnt : ql2xexlogins;
+	ha->exlogin_size = (size * temp);
+	ql_log(ql_log_info, vha, 0xd024,
+		"EXLOGIN: max_logins=%d, portdb=0x%x, total=%d.\n",
+		max_cnt, size, temp);
+
+	ql_log(ql_log_info, vha, 0xd025, "EXLOGIN: requested size=0x%x\n",
+		ha->exlogin_size);
+
+	/* Get consistent memory for extended logins */
+	ha->exlogin_buf = dma_alloc_coherent(&ha->pdev->dev,
+	    ha->exlogin_size, &ha->exlogin_buf_dma, GFP_KERNEL);
+	if (!ha->exlogin_buf) {
+		ql_log_pci(ql_log_fatal, ha->pdev, 0xd02a,
+		    "Failed to allocate memory for exlogin_buf_dma.\n");
+		return -ENOMEM;
+	}
+
+	/* Now configure the dma buffer */
+	rval = qla_set_exlogin_mem_cfg(vha, ha->exlogin_buf_dma);
+	if (rval) {
+		ql_log(ql_log_fatal, vha, 0x00cf,
+		    "Setup extended login buffer  ****FAILED****.\n");
+		qla2x00_free_exlogin_buffer(ha);
+	}
+
+	return rval;
+}
+
+/*
+* qla2x00_free_exlogin_buffer
+*
+* Input:
+*	ha = adapter block pointer
+*/
+void
+qla2x00_free_exlogin_buffer(struct qla_hw_data *ha)
+{
+	if (ha->exlogin_buf) {
+		dma_free_coherent(&ha->pdev->dev, ha->exlogin_size,
+		    ha->exlogin_buf, ha->exlogin_buf_dma);
+		ha->exlogin_buf = NULL;
+		ha->exlogin_size = 0;
+	}
+}
+
+int
+qla2x00_set_exchoffld_buffer(scsi_qla_host_t *vha)
+{
+	int rval;
+	uint16_t	size, max_cnt, temp;
+	struct qla_hw_data *ha = vha->hw;
+
+	/* Return if we don't need to alloacate any extended logins */
+	if (!ql2xexchoffld)
+		return QLA_SUCCESS;
+
+	ql_log(ql_log_info, vha, 0xd014,
+	    "Exchange offload count: %d.\n", ql2xexlogins);
+
+	max_cnt = 0;
+	rval = qla_get_exchoffld_status(vha, &size, &max_cnt);
+	if (rval != QLA_SUCCESS) {
+		ql_log_pci(ql_log_fatal, ha->pdev, 0xd012,
+		    "Failed to get exlogin status.\n");
+		return rval;
+	}
+
+	temp = (ql2xexchoffld > max_cnt) ? max_cnt : ql2xexchoffld;
+	ha->exchoffld_size = (size * temp);
+	ql_log(ql_log_info, vha, 0xd016,
+		"Exchange offload: max_count=%d, buffers=0x%x, total=%d.\n",
+		max_cnt, size, temp);
+
+	ql_log(ql_log_info, vha, 0xd017,
+	    "Exchange Buffers requested size = 0x%x\n", ha->exchoffld_size);
+
+	/* Get consistent memory for extended logins */
+	ha->exchoffld_buf = dma_alloc_coherent(&ha->pdev->dev,
+	    ha->exchoffld_size, &ha->exchoffld_buf_dma, GFP_KERNEL);
+	if (!ha->exchoffld_buf) {
+		ql_log_pci(ql_log_fatal, ha->pdev, 0xd013,
+		    "Failed to allocate memory for exchoffld_buf_dma.\n");
+		return -ENOMEM;
+	}
+
+	/* Now configure the dma buffer */
+	rval = qla_set_exchoffld_mem_cfg(vha, ha->exchoffld_buf_dma);
+	if (rval) {
+		ql_log(ql_log_fatal, vha, 0xd02e,
+		    "Setup exchange offload buffer ****FAILED****.\n");
+		qla2x00_free_exchoffld_buffer(ha);
+	}
+
+	return rval;
+}
+
+/*
+* qla2x00_free_exchoffld_buffer
+*
+* Input:
+*	ha = adapter block pointer
+*/
+void
+qla2x00_free_exchoffld_buffer(struct qla_hw_data *ha)
+{
+	if (ha->exchoffld_buf) {
+		dma_free_coherent(&ha->pdev->dev, ha->exchoffld_size,
+		    ha->exchoffld_buf, ha->exchoffld_buf_dma);
+		ha->exchoffld_buf = NULL;
+		ha->exchoffld_size = 0;
+	}
+}
+
 /*
 * qla2x00_free_fw_dump
 *	Frees fw dump stuff.
@@ -3766,6 +3923,8 @@ struct scsi_qla_host *qla2x00_create_host(struct scsi_host_template *sht,
 	INIT_LIST_HEAD(&vha->list);
 	INIT_LIST_HEAD(&vha->qla_cmd_list);
 	INIT_LIST_HEAD(&vha->qla_sess_op_cmd_list);
+	INIT_LIST_HEAD(&vha->logo_list);
+	INIT_LIST_HEAD(&vha->plogi_ack_list);
 
 	spin_lock_init(&vha->work_lock);
 	spin_lock_init(&vha->cmd_list_lock);