[PATCH] sata_sil24: implement loss of completion interrupt on PCI-X errta fix

SiI3124 might lose completion interrupt if completion interrupt occurs
shortly after SLOT_STAT register is read for the previous completion
interrupt if it is operating in PCI-X mode.

This currently doesn't trigger as libata never queues more than one
command, but it will with NCQ changes.  This patch implements the
workaround - turning on WoC and explicitly clearing interrupt.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 25 insertions, 2 deletions

diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index 50c2c6bcba6e..c535607e995a 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -221,6 +221,7 @@ enum {
 	/* host flags */
 	SIL24_COMMON_FLAGS	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
+	SIL24_FLAG_PCIX_IRQ_WOC	= (1 << 24), /* IRQ loss errata on PCI-X */
 
 	IRQ_STAT_4PORTS		= 0xf,
 };
@@ -348,7 +349,8 @@ static struct ata_port_info sil24_port_info[] = {
 	/* sil_3124 */
 	{
 		.sht		= &sil24_sht,
-		.host_flags	= SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4),
+		.host_flags	= SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) |
+				  SIL24_FLAG_PCIX_IRQ_WOC,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
 		.udma_mask	= 0x3f,			/* udma0-5 */
@@ -737,6 +739,10 @@ static inline void sil24_host_intr(struct ata_port *ap)
 	slot_stat = readl(port + PORT_SLOT_STAT);
 	if (!(slot_stat & HOST_SSTAT_ATTN)) {
 		struct sil24_port_priv *pp = ap->private_data;
+
+		if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
+			writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT);
+
 		/*
 		 * !HOST_SSAT_ATTN guarantees successful completion,
 		 * so reading back tf registers is unnecessary for
@@ -868,6 +874,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	void __iomem *host_base = NULL;
 	void __iomem *port_base = NULL;
 	int i, rc;
+	u32 tmp;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
@@ -941,13 +948,23 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/* GPIO off */
 	writel(0, host_base + HOST_FLASH_CMD);
 
+	/* Apply workaround for completion IRQ loss on PCI-X errata */
+	if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC) {
+		tmp = readl(host_base + HOST_CTRL);
+		if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL))
+			dev_printk(KERN_INFO, &pdev->dev,
+				   "Applying completion IRQ loss on PCI-X "
+				   "errata fix\n");
+		else
+			probe_ent->host_flags &= ~SIL24_FLAG_PCIX_IRQ_WOC;
+	}
+
 	/* clear global reset & mask interrupts during initialization */
 	writel(0, host_base + HOST_CTRL);
 
 	for (i = 0; i < probe_ent->n_ports; i++) {
 		void __iomem *port = port_base + i * PORT_REGS_SIZE;
 		unsigned long portu = (unsigned long)port;
-		u32 tmp;
 
 		probe_ent->port[i].cmd_addr = portu + PORT_PRB;
 		probe_ent->port[i].scr_addr = portu + PORT_SCONTROL;
@@ -969,6 +986,12 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 				           "failed to clear port RST\n");
 		}
 
+		/* Configure IRQ WoC */
+		if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC)
+			writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT);
+		else
+			writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
+
 		/* Zero error counters. */
 		writel(0x8000, port + PORT_DECODE_ERR_THRESH);
 		writel(0x8000, port + PORT_CRC_ERR_THRESH);