Move libata to drivers/ata.

1 files changed, 0 insertions, 482 deletions

diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
deleted file mode 100644
index 4c69a705a483..000000000000
--- a/drivers/scsi/sata_vsc.c
+++ /dev/null
@@ -1,482 +0,0 @@
-/*
- *  sata_vsc.c - Vitesse VSC7174 4 port DPA SATA
- *
- *  Maintained by:  Jeremy Higdon @ SGI
- * 		    Please ALWAYS copy linux-ide@vger.kernel.org
- *		    on emails.
- *
- *  Copyright 2004 SGI
- *
- *  Bits from Jeff Garzik, Copyright RedHat, Inc.
- *
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2, or (at your option)
- *  any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; see the file COPYING.  If not, write to
- *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- *  libata documentation is available via 'make {ps|pdf}docs',
- *  as Documentation/DocBook/libata.*
- *
- *  Vitesse hardware documentation presumably available under NDA.
- *  Intel 31244 (same hardware interface) documentation presumably
- *  available from http://developer.intel.com/
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <linux/device.h>
-#include <scsi/scsi_host.h>
-#include <linux/libata.h>
-
-#define DRV_NAME	"sata_vsc"
-#define DRV_VERSION	"2.0"
-
-enum {
-	/* Interrupt register offsets (from chip base address) */
-	VSC_SATA_INT_STAT_OFFSET	= 0x00,
-	VSC_SATA_INT_MASK_OFFSET	= 0x04,
-
-	/* Taskfile registers offsets */
-	VSC_SATA_TF_CMD_OFFSET		= 0x00,
-	VSC_SATA_TF_DATA_OFFSET		= 0x00,
-	VSC_SATA_TF_ERROR_OFFSET	= 0x04,
-	VSC_SATA_TF_FEATURE_OFFSET	= 0x06,
-	VSC_SATA_TF_NSECT_OFFSET	= 0x08,
-	VSC_SATA_TF_LBAL_OFFSET		= 0x0c,
-	VSC_SATA_TF_LBAM_OFFSET		= 0x10,
-	VSC_SATA_TF_LBAH_OFFSET		= 0x14,
-	VSC_SATA_TF_DEVICE_OFFSET	= 0x18,
-	VSC_SATA_TF_STATUS_OFFSET	= 0x1c,
-	VSC_SATA_TF_COMMAND_OFFSET	= 0x1d,
-	VSC_SATA_TF_ALTSTATUS_OFFSET	= 0x28,
-	VSC_SATA_TF_CTL_OFFSET		= 0x29,
-
-	/* DMA base */
-	VSC_SATA_UP_DESCRIPTOR_OFFSET	= 0x64,
-	VSC_SATA_UP_DATA_BUFFER_OFFSET	= 0x6C,
-	VSC_SATA_DMA_CMD_OFFSET		= 0x70,
-
-	/* SCRs base */
-	VSC_SATA_SCR_STATUS_OFFSET	= 0x100,
-	VSC_SATA_SCR_ERROR_OFFSET	= 0x104,
-	VSC_SATA_SCR_CONTROL_OFFSET	= 0x108,
-
-	/* Port stride */
-	VSC_SATA_PORT_OFFSET		= 0x200,
-
-	/* Error interrupt status bit offsets */
-	VSC_SATA_INT_ERROR_CRC		= 0x40,
-	VSC_SATA_INT_ERROR_T		= 0x20,
-	VSC_SATA_INT_ERROR_P		= 0x10,
-	VSC_SATA_INT_ERROR_R		= 0x8,
-	VSC_SATA_INT_ERROR_E		= 0x4,
-	VSC_SATA_INT_ERROR_M		= 0x2,
-	VSC_SATA_INT_PHY_CHANGE		= 0x1,
-	VSC_SATA_INT_ERROR = (VSC_SATA_INT_ERROR_CRC  | VSC_SATA_INT_ERROR_T | \
-			      VSC_SATA_INT_ERROR_P    | VSC_SATA_INT_ERROR_R | \
-			      VSC_SATA_INT_ERROR_E    | VSC_SATA_INT_ERROR_M | \
-			      VSC_SATA_INT_PHY_CHANGE),
-};
-
-
-#define is_vsc_sata_int_err(port_idx, int_status) \
-	 (int_status & (VSC_SATA_INT_ERROR << (8 * port_idx)))
-
-
-static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
-{
-	if (sc_reg > SCR_CONTROL)
-		return 0xffffffffU;
-	return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
-}
-
-
-static void vsc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg,
-			       u32 val)
-{
-	if (sc_reg > SCR_CONTROL)
-		return;
-	writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
-}
-
-
-static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl)
-{
-	void __iomem *mask_addr;
-	u8 mask;
-
-	mask_addr = ap->host_set->mmio_base +
-		VSC_SATA_INT_MASK_OFFSET + ap->port_no;
-	mask = readb(mask_addr);
-	if (ctl & ATA_NIEN)
-		mask |= 0x80;
-	else
-		mask &= 0x7F;
-	writeb(mask, mask_addr);
-}
-
-
-static void vsc_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
-{
-	struct ata_ioports *ioaddr = &ap->ioaddr;
-	unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
-
-	/*
-	 * The only thing the ctl register is used for is SRST.
-	 * That is not enabled or disabled via tf_load.
-	 * However, if ATA_NIEN is changed, then we need to change the interrupt register.
-	 */
-	if ((tf->ctl & ATA_NIEN) != (ap->last_ctl & ATA_NIEN)) {
-		ap->last_ctl = tf->ctl;
-		vsc_intr_mask_update(ap, tf->ctl & ATA_NIEN);
-	}
-	if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
-		writew(tf->feature | (((u16)tf->hob_feature) << 8), ioaddr->feature_addr);
-		writew(tf->nsect | (((u16)tf->hob_nsect) << 8), ioaddr->nsect_addr);
-		writew(tf->lbal | (((u16)tf->hob_lbal) << 8), ioaddr->lbal_addr);
-		writew(tf->lbam | (((u16)tf->hob_lbam) << 8), ioaddr->lbam_addr);
-		writew(tf->lbah | (((u16)tf->hob_lbah) << 8), ioaddr->lbah_addr);
-	} else if (is_addr) {
-		writew(tf->feature, ioaddr->feature_addr);
-		writew(tf->nsect, ioaddr->nsect_addr);
-		writew(tf->lbal, ioaddr->lbal_addr);
-		writew(tf->lbam, ioaddr->lbam_addr);
-		writew(tf->lbah, ioaddr->lbah_addr);
-	}
-
-	if (tf->flags & ATA_TFLAG_DEVICE)
-		writeb(tf->device, ioaddr->device_addr);
-
-	ata_wait_idle(ap);
-}
-
-
-static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
-{
-	struct ata_ioports *ioaddr = &ap->ioaddr;
-	u16 nsect, lbal, lbam, lbah, feature;
-
-	tf->command = ata_check_status(ap);
-	tf->device = readw(ioaddr->device_addr);
-	feature = readw(ioaddr->error_addr);
-	nsect = readw(ioaddr->nsect_addr);
-	lbal = readw(ioaddr->lbal_addr);
-	lbam = readw(ioaddr->lbam_addr);
-	lbah = readw(ioaddr->lbah_addr);
-
-	tf->feature = feature;
-	tf->nsect = nsect;
-	tf->lbal = lbal;
-	tf->lbam = lbam;
-	tf->lbah = lbah;
-
-	if (tf->flags & ATA_TFLAG_LBA48) {
-		tf->hob_feature = feature >> 8;
-		tf->hob_nsect = nsect >> 8;
-		tf->hob_lbal = lbal >> 8;
-		tf->hob_lbam = lbam >> 8;
-		tf->hob_lbah = lbah >> 8;
-        }
-}
-
-
-/*
- * vsc_sata_interrupt
- *
- * Read the interrupt register and process for the devices that have them pending.
- */
-static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance,
-				       struct pt_regs *regs)
-{
-	struct ata_host_set *host_set = dev_instance;
-	unsigned int i;
-	unsigned int handled = 0;
-	u32 int_status;
-
-	spin_lock(&host_set->lock);
-
-	int_status = readl(host_set->mmio_base + VSC_SATA_INT_STAT_OFFSET);
-
-	for (i = 0; i < host_set->n_ports; i++) {
-		if (int_status & ((u32) 0xFF << (8 * i))) {
-			struct ata_port *ap;
-
-			ap = host_set->ports[i];
-
-			if (is_vsc_sata_int_err(i, int_status)) {
-				u32 err_status;
-				printk(KERN_DEBUG "%s: ignoring interrupt(s)\n", __FUNCTION__);
-				err_status = ap ? vsc_sata_scr_read(ap, SCR_ERROR) : 0;
-				vsc_sata_scr_write(ap, SCR_ERROR, err_status);
-				handled++;
-			}
-
-			if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
-				struct ata_queued_cmd *qc;
-
-				qc = ata_qc_from_tag(ap, ap->active_tag);
-				if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
-					handled += ata_host_intr(ap, qc);
-				else if (is_vsc_sata_int_err(i, int_status)) {
-					/*
-					 * On some chips (i.e. Intel 31244), an error
-					 * interrupt will sneak in at initialization
-					 * time (phy state changes).  Clearing the SCR
-					 * error register is not required, but it prevents
-					 * the phy state change interrupts from recurring
-					 * later.
-					 */
-					u32 err_status;
-					err_status = vsc_sata_scr_read(ap, SCR_ERROR);
-					printk(KERN_DEBUG "%s: clearing interrupt, "
-					       "status %x; sata err status %x\n",
-					       __FUNCTION__,
-					       int_status, err_status);
-					vsc_sata_scr_write(ap, SCR_ERROR, err_status);
-					/* Clear interrupt status */
-					ata_chk_status(ap);
-					handled++;
-				}
-			}
-		}
-	}
-
-	spin_unlock(&host_set->lock);
-
-	return IRQ_RETVAL(handled);
-}
-
-
-static struct scsi_host_template vsc_sata_sht = {
-	.module			= THIS_MODULE,
-	.name			= DRV_NAME,
-	.ioctl			= ata_scsi_ioctl,
-	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= ATA_DEF_QUEUE,
-	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
-	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
-	.use_clustering		= ATA_SHT_USE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ATA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
-};
-
-
-static const struct ata_port_operations vsc_sata_ops = {
-	.port_disable		= ata_port_disable,
-	.tf_load		= vsc_sata_tf_load,
-	.tf_read		= vsc_sata_tf_read,
-	.exec_command		= ata_exec_command,
-	.check_status		= ata_check_status,
-	.dev_select		= ata_std_dev_select,
-	.bmdma_setup            = ata_bmdma_setup,
-	.bmdma_start            = ata_bmdma_start,
-	.bmdma_stop		= ata_bmdma_stop,
-	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
-	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_mmio_data_xfer,
-	.freeze			= ata_bmdma_freeze,
-	.thaw			= ata_bmdma_thaw,
-	.error_handler		= ata_bmdma_error_handler,
-	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
-	.irq_handler		= vsc_sata_interrupt,
-	.irq_clear		= ata_bmdma_irq_clear,
-	.scr_read		= vsc_sata_scr_read,
-	.scr_write		= vsc_sata_scr_write,
-	.port_start		= ata_port_start,
-	.port_stop		= ata_port_stop,
-	.host_stop		= ata_pci_host_stop,
-};
-
-static void __devinit vsc_sata_setup_port(struct ata_ioports *port, unsigned long base)
-{
-	port->cmd_addr		= base + VSC_SATA_TF_CMD_OFFSET;
-	port->data_addr		= base + VSC_SATA_TF_DATA_OFFSET;
-	port->error_addr	= base + VSC_SATA_TF_ERROR_OFFSET;
-	port->feature_addr	= base + VSC_SATA_TF_FEATURE_OFFSET;
-	port->nsect_addr	= base + VSC_SATA_TF_NSECT_OFFSET;
-	port->lbal_addr		= base + VSC_SATA_TF_LBAL_OFFSET;
-	port->lbam_addr		= base + VSC_SATA_TF_LBAM_OFFSET;
-	port->lbah_addr		= base + VSC_SATA_TF_LBAH_OFFSET;
-	port->device_addr	= base + VSC_SATA_TF_DEVICE_OFFSET;
-	port->status_addr	= base + VSC_SATA_TF_STATUS_OFFSET;
-	port->command_addr	= base + VSC_SATA_TF_COMMAND_OFFSET;
-	port->altstatus_addr	= base + VSC_SATA_TF_ALTSTATUS_OFFSET;
-	port->ctl_addr		= base + VSC_SATA_TF_CTL_OFFSET;
-	port->bmdma_addr	= base + VSC_SATA_DMA_CMD_OFFSET;
-	port->scr_addr		= base + VSC_SATA_SCR_STATUS_OFFSET;
-	writel(0, base + VSC_SATA_UP_DESCRIPTOR_OFFSET);
-	writel(0, base + VSC_SATA_UP_DATA_BUFFER_OFFSET);
-}
-
-
-static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
-{
-	static int printed_version;
-	struct ata_probe_ent *probe_ent = NULL;
-	unsigned long base;
-	int pci_dev_busy = 0;
-	void __iomem *mmio_base;
-	int rc;
-
-	if (!printed_version++)
-		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
-
-	rc = pci_enable_device(pdev);
-	if (rc)
-		return rc;
-
-	/*
-	 * Check if we have needed resource mapped.
-	 */
-	if (pci_resource_len(pdev, 0) == 0) {
-		rc = -ENODEV;
-		goto err_out;
-	}
-
-	rc = pci_request_regions(pdev, DRV_NAME);
-	if (rc) {
-		pci_dev_busy = 1;
-		goto err_out;
-	}
-
-	/*
-	 * Use 32 bit DMA mask, because 64 bit address support is poor.
-	 */
-	rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
-	if (rc)
-		goto err_out_regions;
-	rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
-	if (rc)
-		goto err_out_regions;
-
-	probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
-	if (probe_ent == NULL) {
-		rc = -ENOMEM;
-		goto err_out_regions;
-	}
-	memset(probe_ent, 0, sizeof(*probe_ent));
-	probe_ent->dev = pci_dev_to_dev(pdev);
-	INIT_LIST_HEAD(&probe_ent->node);
-
-	mmio_base = pci_iomap(pdev, 0, 0);
-	if (mmio_base == NULL) {
-		rc = -ENOMEM;
-		goto err_out_free_ent;
-	}
-	base = (unsigned long) mmio_base;
-
-	/*
-	 * Due to a bug in the chip, the default cache line size can't be used
-	 */
-	pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x80);
-
-	probe_ent->sht = &vsc_sata_sht;
-	probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				ATA_FLAG_MMIO;
-	probe_ent->port_ops = &vsc_sata_ops;
-	probe_ent->n_ports = 4;
-	probe_ent->irq = pdev->irq;
-	probe_ent->irq_flags = IRQF_SHARED;
-	probe_ent->mmio_base = mmio_base;
-
-	/* We don't care much about the PIO/UDMA masks, but the core won't like us
-	 * if we don't fill these
-	 */
-	probe_ent->pio_mask = 0x1f;
-	probe_ent->mwdma_mask = 0x07;
-	probe_ent->udma_mask = 0x7f;
-
-	/* We have 4 ports per PCI function */
-	vsc_sata_setup_port(&probe_ent->port[0], base + 1 * VSC_SATA_PORT_OFFSET);
-	vsc_sata_setup_port(&probe_ent->port[1], base + 2 * VSC_SATA_PORT_OFFSET);
-	vsc_sata_setup_port(&probe_ent->port[2], base + 3 * VSC_SATA_PORT_OFFSET);
-	vsc_sata_setup_port(&probe_ent->port[3], base + 4 * VSC_SATA_PORT_OFFSET);
-
-	pci_set_master(pdev);
-
-	/*
-	 * Config offset 0x98 is "Extended Control and Status Register 0"
-	 * Default value is (1 << 28).  All bits except bit 28 are reserved in
-	 * DPA mode.  If bit 28 is set, LED 0 reflects all ports' activity.
-	 * If bit 28 is clear, each port has its own LED.
-	 */
-	pci_write_config_dword(pdev, 0x98, 0);
-
-	/* FIXME: check ata_device_add return value */
-	ata_device_add(probe_ent);
-	kfree(probe_ent);
-
-	return 0;
-
-err_out_free_ent:
-	kfree(probe_ent);
-err_out_regions:
-	pci_release_regions(pdev);
-err_out:
-	if (!pci_dev_busy)
-		pci_disable_device(pdev);
-	return rc;
-}
-
-
-static const struct pci_device_id vsc_sata_pci_tbl[] = {
-	{ PCI_VENDOR_ID_VITESSE, 0x7174,
-	  PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
-	{ PCI_VENDOR_ID_INTEL, 0x3200,
-	  PCI_ANY_ID, PCI_ANY_ID, 0x10600, 0xFFFFFF, 0 },
-	{ }	/* terminate list */
-};
-
-
-static struct pci_driver vsc_sata_pci_driver = {
-	.name			= DRV_NAME,
-	.id_table		= vsc_sata_pci_tbl,
-	.probe			= vsc_sata_init_one,
-	.remove			= ata_pci_remove_one,
-};
-
-
-static int __init vsc_sata_init(void)
-{
-	return pci_register_driver(&vsc_sata_pci_driver);
-}
-
-
-static void __exit vsc_sata_exit(void)
-{
-	pci_unregister_driver(&vsc_sata_pci_driver);
-}
-
-
-MODULE_AUTHOR("Jeremy Higdon");
-MODULE_DESCRIPTION("low-level driver for Vitesse VSC7174 SATA controller");
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(pci, vsc_sata_pci_tbl);
-MODULE_VERSION(DRV_VERSION);
-
-module_init(vsc_sata_init);
-module_exit(vsc_sata_exit);