Merge branch 'master'

28 files changed, 75 insertions, 69 deletions

diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index 0ab26d01877b..0d2b447c50ed 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -1026,7 +1026,7 @@ static void twa_free_request_id(TW_Device_Extension *tw_dev, int request_id)
 	tw_dev->free_tail = (tw_dev->free_tail + 1) % TW_Q_LENGTH;
 } /* End twa_free_request_id() */
 
-/* This function will get parameter table entires from the firmware */
+/* This function will get parameter table entries from the firmware */
 static void *twa_get_param(TW_Device_Extension *tw_dev, int request_id, int table_id, int parameter_id, int parameter_size_bytes)
 {
 	TW_Command_Full *full_command_packet;
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index 1c459343292b..bde3d5834ade 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -41,6 +41,8 @@
 #include <linux/stat.h>
 #include <linux/pci.h>
 #include <linux/spinlock.h>
+#include <linux/jiffies.h>
+#include <linux/dma-mapping.h>
 #include <scsi/scsicam.h>
 
 #include <asm/dma.h>
@@ -676,7 +678,7 @@ static int __init BusLogic_InitializeMultiMasterProbeInfo(struct BusLogic_HostAd
 		if (pci_enable_device(PCI_Device))
 			continue;
 
-		if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
+		if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK ))
 			continue;
 
 		Bus = PCI_Device->bus->number;
@@ -831,7 +833,7 @@ static int __init BusLogic_InitializeMultiMasterProbeInfo(struct BusLogic_HostAd
 		if (pci_enable_device(PCI_Device))
 			continue;
 
-		if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
+		if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK))
 			continue;
 
 		Bus = PCI_Device->bus->number;
@@ -885,7 +887,7 @@ static int __init BusLogic_InitializeFlashPointProbeInfo(struct BusLogic_HostAda
 		if (pci_enable_device(PCI_Device))
 			continue;
 
-		if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
+		if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK))
 			continue;
 
 		Bus = PCI_Device->bus->number;
@@ -2896,7 +2898,7 @@ static int BusLogic_QueueCommand(struct scsi_cmnd *Command, void (*CompletionRou
 		 */
 		if (HostAdapter->ActiveCommands[TargetID] == 0)
 			HostAdapter->LastSequencePoint[TargetID] = jiffies;
-		else if (jiffies - HostAdapter->LastSequencePoint[TargetID] > 4 * HZ) {
+		else if (time_after(jiffies, HostAdapter->LastSequencePoint[TargetID] + 4 * HZ)) {
 			HostAdapter->LastSequencePoint[TargetID] = jiffies;
 			QueueTag = BusLogic_OrderedQueueTag;
 		}
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
index 9f45ae1745da..3dce21c78737 100644
--- a/drivers/scsi/a100u2w.c
+++ b/drivers/scsi/a100u2w.c
@@ -89,6 +89,7 @@
 #include <linux/string.h>
 #include <linux/ioport.h>
 #include <linux/slab.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -1052,7 +1053,7 @@ static int __devinit inia100_probe_one(struct pci_dev *pdev,
 
 	if (pci_enable_device(pdev))
 		goto out;
-	if (pci_set_dma_mask(pdev, 0xffffffffULL)) {
+	if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
 		printk(KERN_WARNING "Unable to set 32bit DMA "
 				    "on inia100 adapter, ignoring.\n");
 		goto out_disable_device;
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index a16f8ded8f1d..8df4a0ea3761 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -32,6 +32,7 @@
 #include <linux/slab.h>
 #include <linux/completion.h>
 #include <linux/blkdev.h>
+#include <linux/dma-mapping.h>
 #include <asm/semaphore.h>
 #include <asm/uaccess.h>
 
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index c2596335549d..720330778648 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -45,6 +45,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
 #include <linux/syscalls.h>
 #include <linux/delay.h>
 #include <linux/smp_lock.h>
@@ -806,8 +807,8 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
 	 * to driver communication memory to be allocated below 2gig
 	 */
 	if (aac_drivers[index].quirks & AAC_QUIRK_31BIT) 
-		if (pci_set_dma_mask(pdev, 0x7FFFFFFFULL) ||
-				pci_set_consistent_dma_mask(pdev, 0x7FFFFFFFULL))
+		if (pci_set_dma_mask(pdev, DMA_31BIT_MASK) ||
+				pci_set_consistent_dma_mask(pdev, DMA_31BIT_MASK))
 			goto out;
 	
 	pci_set_master(pdev);
diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c
index 583d2d8c8335..fad2109268bb 100644
--- a/drivers/scsi/arm/cumana_2.c
+++ b/drivers/scsi/arm/cumana_2.c
@@ -550,6 +550,6 @@ module_exit(cumanascsi2_exit);
 
 MODULE_AUTHOR("Russell King");
 MODULE_DESCRIPTION("Cumana SCSI-2 driver for Acorn machines");
-MODULE_PARM(term, "1-8i");
+module_param_array(term, int, NULL, 0);
 MODULE_PARM_DESC(term, "SCSI bus termination");
 MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c
index 3ffec7efc9d5..dcbb4b2b3fe0 100644
--- a/drivers/scsi/arm/eesox.c
+++ b/drivers/scsi/arm/eesox.c
@@ -674,6 +674,6 @@ module_exit(eesox_exit);
 
 MODULE_AUTHOR("Russell King");
 MODULE_DESCRIPTION("EESOX 'Fast' SCSI driver for Acorn machines");
-MODULE_PARM(term, "1-8i");
+module_param_array(term, int, NULL, 0);
 MODULE_PARM_DESC(term, "SCSI bus termination");
 MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c
index 3113bdcedb13..3d69f6c45a6b 100644
--- a/drivers/scsi/arm/powertec.c
+++ b/drivers/scsi/arm/powertec.c
@@ -466,6 +466,6 @@ module_exit(powertecscsi_exit);
 
 MODULE_AUTHOR("Russell King");
 MODULE_DESCRIPTION("Powertec SCSI driver");
-MODULE_PARM(term, "1-8i");
+module_param_array(term, int, NULL, 0);
 MODULE_PARM_DESC(term, "SCSI bus termination");
 MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c
index f4c1ca7c1572..f677c5a32a68 100644
--- a/drivers/scsi/atari_scsi.c
+++ b/drivers/scsi/atari_scsi.c
@@ -239,17 +239,17 @@ static int atari_read_overruns = 0;
 #endif
 
 static int setup_can_queue = -1;
-MODULE_PARM(setup_can_queue, "i");
+module_param(setup_can_queue, int, 0);
 static int setup_cmd_per_lun = -1;
-MODULE_PARM(setup_cmd_per_lun, "i");
+module_param(setup_cmd_per_lun, int, 0);
 static int setup_sg_tablesize = -1;
-MODULE_PARM(setup_sg_tablesize, "i");
+module_param(setup_sg_tablesize, int, 0);
 #ifdef SUPPORT_TAGS
 static int setup_use_tagged_queuing = -1;
-MODULE_PARM(setup_use_tagged_queuing, "i");
+module_param(setup_use_tagged_queuing, int, 0);
 #endif
 static int setup_hostid = -1;
-MODULE_PARM(setup_hostid, "i");
+module_param(setup_hostid, int, 0);
 
 
 #if defined(CONFIG_TT_DMA_EMUL)
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index 5227a779c05c..a198d86667e9 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -28,6 +28,7 @@
 #include <linux/spinlock.h>
 #include <linux/pci.h>
 #include <linux/blkdev.h>
+#include <linux/dma-mapping.h>
 #include <asm/system.h>
 #include <asm/io.h>
 
@@ -2631,7 +2632,7 @@ static int atp870u_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (pci_enable_device(pdev))
 		return -EIO;
 
-        if (!pci_set_dma_mask(pdev, 0xFFFFFFFFUL)) {
+        if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
                 printk(KERN_INFO "atp870u: use 32bit DMA mask.\n");
         } else {
                 printk(KERN_ERR "atp870u: DMA mask required but not available.\n");
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index 6e6b293dcb28..b1b704a42efd 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -57,6 +57,7 @@ MODULE_DESCRIPTION("Adaptec I2O RAID Driver");
 #include <linux/reboot.h>
 #include <linux/spinlock.h>
 #include <linux/smp_lock.h>
+#include <linux/dma-mapping.h>
 
 #include <linux/timer.h>
 #include <linux/string.h>
@@ -906,8 +907,8 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev
 	}
 
 	pci_set_master(pDev);
-	if (pci_set_dma_mask(pDev, 0xffffffffffffffffULL) &&
-	    pci_set_dma_mask(pDev, 0xffffffffULL))
+	if (pci_set_dma_mask(pDev, DMA_64BIT_MASK) &&
+	    pci_set_dma_mask(pDev, DMA_32BIT_MASK))
 		return -EINVAL;
 
 	base_addr0_phys = pci_resource_start(pDev,0);
diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c
index b3f9de8f7595..059eeee4b554 100644
--- a/drivers/scsi/eata.c
+++ b/drivers/scsi/eata.c
@@ -490,6 +490,7 @@
 #include <linux/init.h>
 #include <linux/ctype.h>
 #include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
 #include <asm/byteorder.h>
 #include <asm/dma.h>
 #include <asm/io.h>
@@ -1426,7 +1427,7 @@ static int port_detect(unsigned long port_base, unsigned int j,
 
 	if (ha->pdev) {
 		pci_set_master(ha->pdev);
-		if (pci_set_dma_mask(ha->pdev, 0xffffffff))
+		if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK))
 			printk("%s: warning, pci_set_dma_mask failed.\n",
 			       ha->board_name);
 	}
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index 62e3cda859af..d5740bbdef3e 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -388,6 +388,7 @@
 #include <linux/proc_fs.h>
 #include <linux/time.h>
 #include <linux/timer.h>
+#include <linux/dma-mapping.h>
 #ifdef GDTH_RTC
 #include <linux/mc146818rtc.h>
 #endif
@@ -671,7 +672,7 @@ static struct file_operations gdth_fops = {
 static struct notifier_block gdth_notifier = {
     gdth_halt, NULL, 0
 };
-
+static int notifier_disabled = 0;
 
 static void gdth_delay(int milliseconds)
 {
@@ -4527,15 +4528,15 @@ static int __init gdth_detect(struct scsi_host_template *shtp)
             if (!(ha->cache_feat & ha->raw_feat & ha->screen_feat &GDT_64BIT)||
                 /* 64-bit DMA only supported from FW >= x.43 */
                 (!ha->dma64_support)) {
-                if (pci_set_dma_mask(pcistr[ctr].pdev, 0xffffffff)) {
+                if (pci_set_dma_mask(pcistr[ctr].pdev, DMA_32BIT_MASK)) {
                     printk(KERN_WARNING "GDT-PCI %d: Unable to set 32-bit DMA\n", hanum);
                     err = TRUE;
                 }
             } else {
                 shp->max_cmd_len = 16;
-                if (!pci_set_dma_mask(pcistr[ctr].pdev, 0xffffffffffffffffULL)) {
+                if (!pci_set_dma_mask(pcistr[ctr].pdev, DMA_64BIT_MASK)) {
                     printk("GDT-PCI %d: 64-bit DMA enabled\n", hanum);
-                } else if (pci_set_dma_mask(pcistr[ctr].pdev, 0xffffffff)) {
+                } else if (pci_set_dma_mask(pcistr[ctr].pdev, DMA_32BIT_MASK)) {
                     printk(KERN_WARNING "GDT-PCI %d: Unable to set 64/32-bit DMA\n", hanum);
                     err = TRUE;
                 }
@@ -4595,13 +4596,13 @@ static int __init gdth_detect(struct scsi_host_template *shtp)
         add_timer(&gdth_timer);
 #endif
         major = register_chrdev(0,"gdth",&gdth_fops);
+        notifier_disabled = 0;
         register_reboot_notifier(&gdth_notifier);
     }
     gdth_polling = FALSE;
     return gdth_ctr_vcount;
 }
 
-
 static int gdth_release(struct Scsi_Host *shp)
 {
     int hanum;
@@ -5632,10 +5633,14 @@ static int gdth_halt(struct notifier_block *nb, ulong event, void *buf)
     char            cmnd[MAX_COMMAND_SIZE];   
 #endif
 
+    if (notifier_disabled)
+    	return NOTIFY_OK;
+
     TRACE2(("gdth_halt() event %d\n",(int)event));
     if (event != SYS_RESTART && event != SYS_HALT && event != SYS_POWER_OFF)
         return NOTIFY_DONE;
 
+    notifier_disabled = 1;
     printk("GDT-HA: Flushing all host drives .. ");
     for (hanum = 0; hanum < gdth_ctr_count; ++hanum) {
         gdth_flush(hanum);
@@ -5679,7 +5684,6 @@ static int gdth_halt(struct notifier_block *nb, ulong event, void *buf)
 #ifdef GDTH_STATISTICS
     del_timer(&gdth_timer);
 #endif
-    unregister_reboot_notifier(&gdth_notifier);
     return NOTIFY_OK;
 }
 
diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c
index ea6f3c0e05d9..0cc7f65b584f 100644
--- a/drivers/scsi/initio.c
+++ b/drivers/scsi/initio.c
@@ -127,6 +127,7 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/jiffies.h>
+#include <linux/dma-mapping.h>
 #include <asm/io.h>
 
 #include <scsi/scsi.h>
@@ -2780,7 +2781,7 @@ static int tul_NewReturnNumberOfAdapters(void)
 			if (((dRegValue & 0xFF00) >> 8) == 0xFF)
 				dRegValue = 0;
 			wBIOS = (wBIOS << 8) + ((UWORD) ((dRegValue & 0xFF00) >> 8));
-			if (pci_set_dma_mask(pDev, 0xffffffff)) {
+			if (pci_set_dma_mask(pDev, DMA_32BIT_MASK)) {
 				printk(KERN_WARNING 
 				       "i91u: Could not set 32 bit DMA mask\n");
 				continue;
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index 481708d527ae..a4c0b04cfdbd 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -179,6 +179,7 @@
 
 #include <linux/blkdev.h>
 #include <linux/types.h>
+#include <linux/dma-mapping.h>
 
 #include <scsi/sg.h>
 
@@ -7284,10 +7285,10 @@ ips_init_phase1(struct pci_dev *pci_dev, int *indexPtr)
 	 * are guaranteed to be < 4G.
 	 */
 	if (IPS_ENABLE_DMA64 && IPS_HAS_ENH_SGLIST(ha) &&
-	    !pci_set_dma_mask(ha->pcidev, 0xffffffffffffffffULL)) {
+	    !pci_set_dma_mask(ha->pcidev, DMA_64BIT_MASK)) {
 		(ha)->flags |= IPS_HA_ENH_SG;
 	} else {
-		if (pci_set_dma_mask(ha->pcidev, 0xffffffffULL) != 0) {
+		if (pci_set_dma_mask(ha->pcidev, DMA_32BIT_MASK) != 0) {
 			printk(KERN_WARNING "Unable to set DMA Mask\n");
 			return ips_abort_init(ha, index);
 		}
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 7b82ff090d42..2068b66822b7 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -3200,8 +3200,8 @@ iscsi_r2tpool_alloc(struct iscsi_session *session)
 		 * Data-Out PDU's within R2T-sequence can be quite big;
 		 * using mempool
 		 */
-		ctask->datapool = mempool_create(ISCSI_DTASK_DEFAULT_MAX,
-			 mempool_alloc_slab, mempool_free_slab, taskcache);
+		ctask->datapool = mempool_create_slab_pool(ISCSI_DTASK_DEFAULT_MAX,
+							   taskcache);
 		if (ctask->datapool == NULL) {
 			kfifo_free(ctask->r2tqueue);
 			iscsi_pool_free(&ctask->r2tpool, (void**)ctask->r2ts);
diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index 352df47bcaca..07017658ac56 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -38,18 +38,6 @@
 #define LPFC_MBUF_POOL_SIZE     64      /* max elements in MBUF safety pool */
 #define LPFC_MEM_POOL_SIZE      64      /* max elem in non-DMA safety pool */
 
-static void *
-lpfc_pool_kmalloc(gfp_t gfp_flags, void *data)
-{
-	return kmalloc((unsigned long)data, gfp_flags);
-}
-
-static void
-lpfc_pool_kfree(void *obj, void *data)
-{
-	kfree(obj);
-}
-
 int
 lpfc_mem_alloc(struct lpfc_hba * phba)
 {
@@ -79,15 +67,13 @@ lpfc_mem_alloc(struct lpfc_hba * phba)
 		pool->current_count++;
 	}
 
-	phba->mbox_mem_pool = mempool_create(LPFC_MEM_POOL_SIZE,
-				lpfc_pool_kmalloc, lpfc_pool_kfree,
-				(void *)(unsigned long)sizeof(LPFC_MBOXQ_t));
+	phba->mbox_mem_pool = mempool_create_kmalloc_pool(LPFC_MEM_POOL_SIZE,
+							 sizeof(LPFC_MBOXQ_t));
 	if (!phba->mbox_mem_pool)
 		goto fail_free_mbuf_pool;
 
-	phba->nlp_mem_pool = mempool_create(LPFC_MEM_POOL_SIZE,
-			lpfc_pool_kmalloc, lpfc_pool_kfree,
-			(void *)(unsigned long)sizeof(struct lpfc_nodelist));
+	phba->nlp_mem_pool = mempool_create_kmalloc_pool(LPFC_MEM_POOL_SIZE,
+						sizeof(struct lpfc_nodelist));
 	if (!phba->nlp_mem_pool)
 		goto fail_free_mbox_pool;
 
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 7144674bc8e6..80b68a2481b3 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -45,6 +45,7 @@
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/dma-mapping.h>
 #include <scsi/scsicam.h>
 
 #include "scsi.h"
@@ -2094,7 +2095,7 @@ make_local_pdev(adapter_t *adapter, struct pci_dev **pdev)
 
 	memcpy(*pdev, adapter->dev, sizeof(struct pci_dev));
 
-	if( pci_set_dma_mask(*pdev, 0xffffffff) != 0 ) {
+	if( pci_set_dma_mask(*pdev, DMA_32BIT_MASK) != 0 ) {
 		kfree(*pdev);
 		return -1;
 	}
@@ -4859,10 +4860,10 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* Set the Mode of addressing to 64 bit if we can */
 	if ((adapter->flag & BOARD_64BIT) && (sizeof(dma_addr_t) == 8)) {
-		pci_set_dma_mask(pdev, 0xffffffffffffffffULL);
+		pci_set_dma_mask(pdev, DMA_64BIT_MASK);
 		adapter->has_64bit_addr = 1;
 	} else  {
-		pci_set_dma_mask(pdev, 0xffffffff);
+		pci_set_dma_mask(pdev, DMA_32BIT_MASK);
 		adapter->has_64bit_addr = 0;
 	}
 		
diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c
index d6d2125f9044..f852421002ef 100644
--- a/drivers/scsi/mesh.c
+++ b/drivers/scsi/mesh.c
@@ -1748,7 +1748,7 @@ static int mesh_host_reset(struct scsi_cmnd *cmd)
 
 static void set_mesh_power(struct mesh_state *ms, int state)
 {
-	if (_machine != _MACH_Pmac)
+	if (!machine_is(powermac))
 		return;
 	if (state) {
 		pmac_call_feature(PMAC_FTR_MESH_ENABLE, macio_get_of_node(ms->mdev), 0, 1);
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index a279ebb61447..30ee0ef4b459 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -38,6 +38,7 @@
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/ctype.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/dma.h>
 #include <asm/system.h>
@@ -2776,7 +2777,7 @@ static int nsp32_detect(struct scsi_host_template *sht)
 	/*
 	 * setup DMA 
 	 */
-	if (pci_set_dma_mask(PCIDEV, 0xffffffffUL) != 0) {
+	if (pci_set_dma_mask(PCIDEV, DMA_32BIT_MASK) != 0) {
 		nsp32_msg (KERN_ERR, "failed to set PCI DMA mask");
 		goto scsi_unregister;
 	}
diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c
index 66ea47a9c53c..e3bd4bc339f4 100644
--- a/drivers/scsi/osst.c
+++ b/drivers/scsi/osst.c
@@ -49,6 +49,7 @@ static const char * osst_version = "0.99.4";
 #include <linux/blkdev.h>
 #include <linux/moduleparam.h>
 #include <linux/delay.h>
+#include <linux/jiffies.h>
 #include <asm/uaccess.h>
 #include <asm/dma.h>
 #include <asm/system.h>
@@ -856,7 +857,7 @@ static int osst_wait_frame(struct osst_tape * STp, struct osst_request ** aSRpnt
 		    ) && result >= 0)
 		{
 #if DEBUG			
-			if (debugging || jiffies - startwait >= 2*HZ/OSST_POLL_PER_SEC)
+			if (debugging || time_after_eq(jiffies, startwait + 2*HZ/OSST_POLL_PER_SEC))
 				printk (OSST_DEB_MSG
 					"%s:D: Succ wait f fr %i (>%i): %i-%i %i (%i): %3li.%li s\n",
 					name, curr, curr+minlast, STp->first_frame_position,
@@ -867,7 +868,7 @@ static int osst_wait_frame(struct osst_tape * STp, struct osst_request ** aSRpnt
 			return 0;
 		}
 #if DEBUG
-		if (jiffies - startwait >= 2*HZ/OSST_POLL_PER_SEC && notyetprinted)
+		if (time_after_eq(jiffies, startwait + 2*HZ/OSST_POLL_PER_SEC) && notyetprinted)
 		{
 			printk (OSST_DEB_MSG "%s:D: Wait for frame %i (>%i): %i-%i %i (%i)\n",
 				name, curr, curr+minlast, STp->first_frame_position,
diff --git a/drivers/scsi/ppa.c b/drivers/scsi/ppa.c
index 05347eed9dd5..fee843fab1c7 100644
--- a/drivers/scsi/ppa.c
+++ b/drivers/scsi/ppa.c
@@ -18,6 +18,7 @@
 #include <linux/parport.h>
 #include <linux/workqueue.h>
 #include <linux/delay.h>
+#include <linux/jiffies.h>
 #include <asm/io.h>
 
 #include <scsi/scsi.h>
@@ -726,7 +727,7 @@ static int ppa_engine(ppa_struct *dev, struct scsi_cmnd *cmd)
 				retv--;
 
 			if (retv) {
-				if ((jiffies - dev->jstart) > (1 * HZ)) {
+				if (time_after(jiffies, dev->jstart + (1 * HZ))) {
 					printk
 					    ("ppa: Parallel port cable is unplugged!!\n");
 					ppa_fail(dev, DID_BUS_BUSY);
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index e0230249fa0f..5a48e55f9418 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -350,6 +350,7 @@
 #include <linux/pci_ids.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -4321,7 +4322,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 #ifdef QLA_64BIT_PTR
 	if (pci_set_dma_mask(ha->pdev, (dma_addr_t) ~ 0ULL)) {
-		if (pci_set_dma_mask(ha->pdev, 0xffffffff)) {
+		if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK)) {
 			printk(KERN_WARNING "scsi(%li): Unable to set a "
 			       "suitable DMA mask - aborting\n", ha->host_no);
 			error = -ENODEV;
@@ -4331,7 +4332,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		dprintk(2, "scsi(%li): 64 Bit PCI Addressing Enabled\n",
 			ha->host_no);
 #else
-	if (pci_set_dma_mask(ha->pdev, 0xffffffff)) {
+	if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK)) {
 		printk(KERN_WARNING "scsi(%li): Unable to set a "
 		       "suitable DMA mask - aborting\n", ha->host_no);
 		error = -ENODEV;
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 029bbf461bb2..017729c59a49 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2154,8 +2154,7 @@ qla2x00_allocate_sp_pool(scsi_qla_host_t *ha)
 	int      rval;
 
 	rval = QLA_SUCCESS;
-	ha->srb_mempool = mempool_create(SRB_MIN_REQ, mempool_alloc_slab,
-	    mempool_free_slab, srb_cachep);
+	ha->srb_mempool = mempool_create_slab_pool(SRB_MIN_REQ, srb_cachep);
 	if (ha->srb_mempool == NULL) {
 		qla_printk(KERN_INFO, ha, "Unable to allocate SRB mempool.\n");
 		rval = QLA_FUNCTION_FAILED;
diff --git a/drivers/scsi/qlogicfc.c b/drivers/scsi/qlogicfc.c
index 94ef3f08d378..52b224a5d6fd 100644
--- a/drivers/scsi/qlogicfc.c
+++ b/drivers/scsi/qlogicfc.c
@@ -61,6 +61,8 @@
 #include <linux/unistd.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/jiffies.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include "scsi.h"
@@ -737,8 +739,8 @@ static int isp2x00_detect(struct scsi_host_template * tmpt)
 				continue;
 
 			/* Try to configure DMA attributes. */
-			if (pci_set_dma_mask(pdev, 0xffffffffffffffffULL) &&
-			    pci_set_dma_mask(pdev, 0xffffffffULL))
+			if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
+			    pci_set_dma_mask(pdev, DMA_32BIT_MASK))
 					continue;
 
 		        host = scsi_register(tmpt, sizeof(struct isp2x00_hostdata));
@@ -1325,7 +1327,7 @@ static int isp2x00_queuecommand(Scsi_Cmnd * Cmnd, void (*done) (Scsi_Cmnd *))
 		cmd->control_flags = cpu_to_le16(CFLAG_READ);
 
 	if (Cmnd->device->tagged_supported) {
-		if ((jiffies - hostdata->tag_ages[Cmnd->device->id]) > (2 * ISP_TIMEOUT)) {
+		if (time_after(jiffies, hostdata->tag_ages[Cmnd->device->id] + (2 * ISP_TIMEOUT))) {
 			cmd->control_flags |= cpu_to_le16(CFLAG_ORDERED_TAG);
 			hostdata->tag_ages[Cmnd->device->id] = jiffies;
 		} else
diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index 1fd5fc6d0fe3..c7e78dcf09df 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -24,6 +24,7 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/jiffies.h>
 
 #include <asm/byteorder.h>
 
@@ -1017,7 +1018,7 @@ static inline void cmd_frob(struct Command_Entry *cmd, struct scsi_cmnd *Cmnd,
 	if (Cmnd->device->tagged_supported) {
 		if (qpti->cmd_count[Cmnd->device->id] == 0)
 			qpti->tag_ages[Cmnd->device->id] = jiffies;
-		if ((jiffies - qpti->tag_ages[Cmnd->device->id]) > (5*HZ)) {
+		if (time_after(jiffies, qpti->tag_ages[Cmnd->device->id] + (5*HZ))) {
 			cmd->control_flags = CFLAG_ORDERED_TAG;
 			qpti->tag_ages[Cmnd->device->id] = jiffies;
 		} else
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index ede158d08d9d..8f010a314a3d 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1787,9 +1787,8 @@ int __init scsi_init_queue(void)
 					sgp->name);
 		}
 
-		sgp->pool = mempool_create(SG_MEMPOOL_SIZE,
-				mempool_alloc_slab, mempool_free_slab,
-				sgp->slab);
+		sgp->pool = mempool_create_slab_pool(SG_MEMPOOL_SIZE,
+						     sgp->slab);
 		if (!sgp->pool) {
 			printk(KERN_ERR "SCSI: can't init sg mempool %s\n",
 					sgp->name);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 024ef86c5242..c647d85d97d1 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -190,7 +190,7 @@ static ssize_t sd_store_cache_type(struct class_device *cdev, const char *buf,
 	if (scsi_mode_sense(sdp, 0x08, 8, buffer, sizeof(buffer), SD_TIMEOUT,
 			    SD_MAX_RETRIES, &data, NULL))
 		return -EINVAL;
-	len = min(sizeof(buffer), data.length - data.header_length -
+	len = min_t(size_t, sizeof(buffer), data.length - data.header_length -
 		  data.block_descriptor_length);
 	buffer_data = buffer + data.header_length +
 		data.block_descriptor_length;