scsi: remove the NCR53c406a driver

This driver hasn't seen any recent bug fixing and is one of the last
drivers using the scsi_module.c infrastruture that has been deprecated
15 years ago.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

3 files changed, 0 insertions, 1103 deletions

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 117c2fb41b77..9fa0cfd5a068 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -841,18 +841,6 @@ config SCSI_IZIP_SLOW_CTR
 
 	  Generally, saying N is fine.
 
-config SCSI_NCR53C406A
-	tristate "NCR53c406a SCSI support"
-	depends on ISA && SCSI
-	help
-	  This is support for the NCR53c406a SCSI host adapter.  For user
-	  configurable parameters, check out <file:drivers/scsi/NCR53c406a.c>
-	  in the kernel source.  Also read the SCSI-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called NCR53c406.
-
 config SCSI_NCR_D700
 	tristate "NCR Dual 700 MCA SCSI support"
 	depends on MCA && SCSI
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 77bb0017bb02..192a58d7d9d9 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -75,7 +75,6 @@ obj-$(CONFIG_SCSI_PM8001)	+= pm8001/
 obj-$(CONFIG_SCSI_ISCI)		+= isci/
 obj-$(CONFIG_SCSI_IPS)		+= ips.o
 obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o
-obj-$(CONFIG_SCSI_NCR53C406A)	+= NCR53c406a.o
 obj-$(CONFIG_SCSI_NCR_D700)	+= 53c700.o NCR_D700.o
 obj-$(CONFIG_SCSI_NCR_Q720)	+= NCR_Q720_mod.o
 obj-$(CONFIG_SCSI_SYM53C416)	+= sym53c416.o
diff --git a/drivers/scsi/NCR53c406a.c b/drivers/scsi/NCR53c406a.c
deleted file mode 100644
index 44b09870bf51..000000000000
--- a/drivers/scsi/NCR53c406a.c
+++ /dev/null
@@ -1,1090 +0,0 @@
-/* 
- *  NCR53c406.c
- *  Low-level SCSI driver for NCR53c406a chip.
- *  Copyright (C) 1994, 1995, 1996 Normunds Saumanis (normunds@fi.ibm.com)
- * 
- *  LILO command line usage: ncr53c406a=<PORTBASE>[,<IRQ>[,<FASTPIO>]]
- *  Specify IRQ = 0 for non-interrupt driven mode.
- *  FASTPIO = 1 for fast pio mode, 0 for slow mode.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2, or (at your option) any
- *  later version.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- */
-
-#define NCR53C406A_DEBUG 0
-#define VERBOSE_NCR53C406A_DEBUG 0
-
-/* Set this to 1 for PIO mode (recommended) or to 0 for DMA mode */
-#define USE_PIO 1
-
-#define USE_BIOS 0
-				/* #define BIOS_ADDR 0xD8000 *//* define this if autoprobe fails */
-				/* #define PORT_BASE 0x330 *//* define this if autoprobe fails */
-				/* #define IRQ_LEV   0	*//* define this if autoprobe fails */
-#define DMA_CHAN  5		/* this is ignored if DMA is disabled */
-
-/* Set this to 0 if you encounter kernel lockups while transferring 
- * data in PIO mode */
-#define USE_FAST_PIO 1
-
-/* ============= End of user configurable parameters ============= */
-
-#include <linux/module.h>
-
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-
-#include <linux/blkdev.h>
-#include <linux/spinlock.h>
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-
-/* ============================================================= */
-
-#define WATCHDOG 5000000
-
-#define SYNC_MODE 0		/* Synchronous transfer mode */
-
-#ifdef DEBUG
-#undef NCR53C406A_DEBUG
-#define NCR53C406A_DEBUG 1
-#endif
-
-#if USE_PIO
-#define USE_DMA 0
-#else
-#define USE_DMA 1
-#endif
-
-/* Default configuration */
-#define C1_IMG   0x07		/* ID=7 */
-#define C2_IMG   0x48		/* FE SCSI2 */
-#if USE_DMA
-#define C3_IMG   0x21		/* CDB TE */
-#else
-#define C3_IMG   0x20		/* CDB */
-#endif
-#define C4_IMG   0x04		/* ANE */
-#define C5_IMG   0xb6		/* AA PI SIE POL */
-
-#define REG0 (outb(C4_IMG, CONFIG4))
-#define REG1 (outb(C5_IMG, CONFIG5))
-
-#if NCR53C406A_DEBUG
-#define DEB(x) x
-#else
-#define DEB(x)
-#endif
-
-#if VERBOSE_NCR53C406A_DEBUG
-#define VDEB(x) x
-#else
-#define VDEB(x)
-#endif
-
-#define LOAD_DMA_COUNT(count) \
-  outb(count & 0xff, TC_LSB); \
-  outb((count >> 8) & 0xff, TC_MSB); \
-  outb((count >> 16) & 0xff, TC_HIGH);
-
-/* Chip commands */
-#define DMA_OP               0x80
-
-#define SCSI_NOP             0x00
-#define FLUSH_FIFO           0x01
-#define CHIP_RESET           0x02
-#define SCSI_RESET           0x03
-#define RESELECT             0x40
-#define SELECT_NO_ATN        0x41
-#define SELECT_ATN           0x42
-#define SELECT_ATN_STOP      0x43
-#define ENABLE_SEL           0x44
-#define DISABLE_SEL          0x45
-#define SELECT_ATN3          0x46
-#define RESELECT3            0x47
-#define TRANSFER_INFO        0x10
-#define INIT_CMD_COMPLETE    0x11
-#define MSG_ACCEPT           0x12
-#define TRANSFER_PAD         0x18
-#define SET_ATN              0x1a
-#define RESET_ATN            0x1b
-#define SEND_MSG             0x20
-#define SEND_STATUS          0x21
-#define SEND_DATA            0x22
-#define DISCONN_SEQ          0x23
-#define TERMINATE_SEQ        0x24
-#define TARG_CMD_COMPLETE    0x25
-#define DISCONN              0x27
-#define RECV_MSG             0x28
-#define RECV_CMD             0x29
-#define RECV_DATA            0x2a
-#define RECV_CMD_SEQ         0x2b
-#define TARGET_ABORT_DMA     0x04
-
-/*----------------------------------------------------------------*/
-/* the following will set the monitor border color (useful to find
-   where something crashed or gets stuck at */
-/* 1 = blue
-   2 = green
-   3 = cyan
-   4 = red
-   5 = magenta
-   6 = yellow
-   7 = white
-*/
-
-#if NCR53C406A_DEBUG
-#define rtrc(i) {inb(0x3da);outb(0x31,0x3c0);outb((i),0x3c0);}
-#else
-#define rtrc(i) {}
-#endif
-/*----------------------------------------------------------------*/
-
-enum Phase {
-	idle,
-	data_out,
-	data_in,
-	command_ph,
-	status_ph,
-	message_out,
-	message_in
-};
-
-/* Static function prototypes */
-static void NCR53c406a_intr(void *);
-static irqreturn_t do_NCR53c406a_intr(int, void *);
-static void chip_init(void);
-static void calc_port_addr(void);
-#ifndef IRQ_LEV
-static int irq_probe(void);
-#endif
-
-/* ================================================================= */
-
-#if USE_BIOS
-static void *bios_base;
-#endif
-
-#ifdef PORT_BASE
-static int port_base = PORT_BASE;
-#else
-static int port_base;
-#endif
-
-#ifdef IRQ_LEV
-static int irq_level = IRQ_LEV;
-#else
-static int irq_level = -1;	/* 0 is 'no irq', so use -1 for 'uninitialized' */
-#endif
-
-#if USE_DMA
-static int dma_chan;
-#endif
-
-#if USE_PIO
-static int fast_pio = USE_FAST_PIO;
-#endif
-
-static Scsi_Cmnd *current_SC;
-static char info_msg[256];
-
-/* ================================================================= */
-
-/* possible BIOS locations */
-#if USE_BIOS
-static void *addresses[] = {
-	(void *) 0xd8000,
-	(void *) 0xc8000
-};
-#define ADDRESS_COUNT ARRAY_SIZE(addresses)
-#endif				/* USE_BIOS */
-
-/* possible i/o port addresses */
-static unsigned short ports[] = { 0x230, 0x330, 0x280, 0x290, 0x330, 0x340, 0x300, 0x310, 0x348, 0x350 };
-#define PORT_COUNT ARRAY_SIZE(ports)
-
-#ifndef MODULE
-/* possible interrupt channels */
-static unsigned short intrs[] = { 10, 11, 12, 15 };
-#define INTR_COUNT ARRAY_SIZE(intrs)
-#endif /* !MODULE */
-
-/* signatures for NCR 53c406a based controllers */
-#if USE_BIOS
-struct signature {
-	char *signature;
-	int sig_offset;
-	int sig_length;
-} signatures[] __initdata = {
-	/*          1         2         3         4         5         6 */
-	/* 123456789012345678901234567890123456789012345678901234567890 */
-	{
-"Copyright (C) Acculogic, Inc.\r\n2.8M Diskette Extension Bios ver 4.04.03 03/01/1993", 61, 82},};
-
-#define SIGNATURE_COUNT ARRAY_SIZE(signatures)
-#endif				/* USE_BIOS */
-
-/* ============================================================ */
-
-/* Control Register Set 0 */
-static int TC_LSB;		/* transfer counter lsb         */
-static int TC_MSB;		/* transfer counter msb */
-static int SCSI_FIFO;		/* scsi fifo register   */
-static int CMD_REG;		/* command register             */
-static int STAT_REG;		/* status register              */
-static int DEST_ID;		/* selection/reselection bus id */
-static int INT_REG;		/* interrupt status register    */
-static int SRTIMOUT;		/* select/reselect timeout reg  */
-static int SEQ_REG;		/* sequence step register       */
-static int SYNCPRD;		/* synchronous transfer period  */
-static int FIFO_FLAGS;		/* indicates # of bytes in fifo */
-static int SYNCOFF;		/* synchronous offset register  */
-static int CONFIG1;		/* configuration register       */
-static int CLKCONV;		/* clock conversion reg */
-				/*static int TESTREG;*//* test mode register           */
-static int CONFIG2;		/* Configuration 2 Register     */
-static int CONFIG3;		/* Configuration 3 Register     */
-static int CONFIG4;		/* Configuration 4 Register     */
-static int TC_HIGH;		/* Transfer Counter High */
-				/*static int FIFO_BOTTOM;*//* Reserve FIFO byte register   */
-
-/* Control Register Set 1 */
-				/*static int JUMPER_SENSE;*//* Jumper sense port reg (r/w) */
-				/*static int SRAM_PTR;*//* SRAM address pointer reg (r/w) */
-				/*static int SRAM_DATA;*//* SRAM data register (r/w) */
-static int PIO_FIFO;		/* PIO FIFO registers (r/w) */
-				/*static int PIO_FIFO1;*//*  */
-				/*static int PIO_FIFO2;*//*  */
-				/*static int PIO_FIFO3;*//*  */
-static int PIO_STATUS;		/* PIO status (r/w) */
-				/*static int ATA_CMD;*//* ATA command/status reg (r/w) */
-				/*static int ATA_ERR;*//* ATA features/error register (r/w) */
-static int PIO_FLAG;		/* PIO flag interrupt enable (r/w) */
-static int CONFIG5;		/* Configuration 5 register (r/w) */
-				/*static int SIGNATURE;*//* Signature Register (r) */
-				/*static int CONFIG6;*//* Configuration 6 register (r) */
-
-/* ============================================================== */
-
-#if USE_DMA
-static __inline__ int NCR53c406a_dma_setup(unsigned char *ptr, unsigned int count, unsigned char mode)
-{
-	unsigned limit;
-	unsigned long flags = 0;
-
-	VDEB(printk("dma: before count=%d   ", count));
-	if (dma_chan <= 3) {
-		if (count > 65536)
-			count = 65536;
-		limit = 65536 - (((unsigned) ptr) & 0xFFFF);
-	} else {
-		if (count > (65536 << 1))
-			count = (65536 << 1);
-		limit = (65536 << 1) - (((unsigned) ptr) & 0x1FFFF);
-	}
-
-	if (count > limit)
-		count = limit;
-
-	VDEB(printk("after count=%d\n", count));
-	if ((count & 1) || (((unsigned) ptr) & 1))
-		panic("NCR53c406a: attempted unaligned DMA transfer\n");
-
-	flags = claim_dma_lock();
-	disable_dma(dma_chan);
-	clear_dma_ff(dma_chan);
-	set_dma_addr(dma_chan, (long) ptr);
-	set_dma_count(dma_chan, count);
-	set_dma_mode(dma_chan, mode);
-	enable_dma(dma_chan);
-	release_dma_lock(flags);
-
-	return count;
-}
-
-static __inline__ int NCR53c406a_dma_write(unsigned char *src, unsigned int count)
-{
-	return NCR53c406a_dma_setup(src, count, DMA_MODE_WRITE);
-}
-
-static __inline__ int NCR53c406a_dma_read(unsigned char *src, unsigned int count)
-{
-	return NCR53c406a_dma_setup(src, count, DMA_MODE_READ);
-}
-
-static __inline__ int NCR53c406a_dma_residual(void)
-{
-	register int tmp;
-	unsigned long flags;
-
-	flags = claim_dma_lock();
-	clear_dma_ff(dma_chan);
-	tmp = get_dma_residue(dma_chan);
-	release_dma_lock(flags);
-
-	return tmp;
-}
-#endif				/* USE_DMA */
-
-#if USE_PIO
-static __inline__ int NCR53c406a_pio_read(unsigned char *request, unsigned int reqlen)
-{
-	int i;
-	int len;		/* current scsi fifo size */
-
-	REG1;
-	while (reqlen) {
-		i = inb(PIO_STATUS);
-		/*    VDEB(printk("pio_status=%x\n", i)); */
-		if (i & 0x80)
-			return 0;
-
-		switch (i & 0x1e) {
-		default:
-		case 0x10:
-			len = 0;
-			break;
-		case 0x0:
-			len = 1;
-			break;
-		case 0x8:
-			len = 42;
-			break;
-		case 0xc:
-			len = 84;
-			break;
-		case 0xe:
-			len = 128;
-			break;
-		}
-
-		if ((i & 0x40) && len == 0) {	/* fifo empty and interrupt occurred */
-			return 0;
-		}
-
-		if (len) {
-			if (len > reqlen)
-				len = reqlen;
-
-			if (fast_pio && len > 3) {
-				insl(PIO_FIFO, request, len >> 2);
-				request += len & 0xfc;
-				reqlen -= len & 0xfc;
-			} else {
-				while (len--) {
-					*request++ = inb(PIO_FIFO);
-					reqlen--;
-				}
-			}
-		}
-	}
-	return 0;
-}
-
-static __inline__ int NCR53c406a_pio_write(unsigned char *request, unsigned int reqlen)
-{
-	int i = 0;
-	int len;		/* current scsi fifo size */
-
-	REG1;
-	while (reqlen && !(i & 0x40)) {
-		i = inb(PIO_STATUS);
-		/*    VDEB(printk("pio_status=%x\n", i)); */
-		if (i & 0x80)	/* error */
-			return 0;
-
-		switch (i & 0x1e) {
-		case 0x10:
-			len = 128;
-			break;
-		case 0x0:
-			len = 84;
-			break;
-		case 0x8:
-			len = 42;
-			break;
-		case 0xc:
-			len = 1;
-			break;
-		default:
-		case 0xe:
-			len = 0;
-			break;
-		}
-
-		if (len) {
-			if (len > reqlen)
-				len = reqlen;
-
-			if (fast_pio && len > 3) {
-				outsl(PIO_FIFO, request, len >> 2);
-				request += len & 0xfc;
-				reqlen -= len & 0xfc;
-			} else {
-				while (len--) {
-					outb(*request++, PIO_FIFO);
-					reqlen--;
-				}
-			}
-		}
-	}
-	return 0;
-}
-#endif				/* USE_PIO */
-
-static int NCR53c406a_detect(struct scsi_host_template * tpnt)
-{
-	int present = 0;
-	struct Scsi_Host *shpnt = NULL;
-#ifndef PORT_BASE
-	int i;
-#endif
-
-#if USE_BIOS
-	int ii, jj;
-	bios_base = 0;
-	/* look for a valid signature */
-	for (ii = 0; ii < ADDRESS_COUNT && !bios_base; ii++)
-		for (jj = 0; (jj < SIGNATURE_COUNT) && !bios_base; jj++)
-			if (!memcmp((void *) addresses[ii] + signatures[jj].sig_offset, (void *) signatures[jj].signature, (int) signatures[jj].sig_length))
-				bios_base = addresses[ii];
-
-	if (!bios_base) {
-		printk("NCR53c406a: BIOS signature not found\n");
-		return 0;
-	}
-
-	DEB(printk("NCR53c406a BIOS found at 0x%x\n", (unsigned int) bios_base);
-	    );
-#endif				/* USE_BIOS */
-
-#ifdef PORT_BASE
-	if (!request_region(port_base, 0x10, "NCR53c406a"))	/* ports already snatched */
-		port_base = 0;
-
-#else				/* autodetect */
-	if (port_base) {	/* LILO override */
-		if (!request_region(port_base, 0x10, "NCR53c406a"))
-			port_base = 0;
-	} else {
-		for (i = 0; i < PORT_COUNT && !port_base; i++) {
-			if (!request_region(ports[i], 0x10, "NCR53c406a")) {
-				DEB(printk("NCR53c406a: port 0x%x in use\n", ports[i]));
-			} else {
-				VDEB(printk("NCR53c406a: port 0x%x available\n", ports[i]));
-				outb(C5_IMG, ports[i] + 0x0d);	/* reg set 1 */
-				if ((inb(ports[i] + 0x0e) ^ inb(ports[i] + 0x0e)) == 7 && (inb(ports[i] + 0x0e) ^ inb(ports[i] + 0x0e)) == 7 && (inb(ports[i] + 0x0e) & 0xf8) == 0x58) {
-					port_base = ports[i];
-					VDEB(printk("NCR53c406a: Sig register valid\n"));
-					VDEB(printk("port_base=0x%x\n", port_base));
-					break;
-				}
-				release_region(ports[i], 0x10);
-			}
-		}
-	}
-#endif				/* PORT_BASE */
-
-	if (!port_base) {	/* no ports found */
-		printk("NCR53c406a: no available ports found\n");
-		return 0;
-	}
-
-	DEB(printk("NCR53c406a detected\n"));
-
-	calc_port_addr();
-	chip_init();
-
-#ifndef IRQ_LEV
-	if (irq_level < 0) {	/* LILO override if >= 0 */
-		irq_level = irq_probe();
-		if (irq_level < 0) {	/* Trouble */
-			printk("NCR53c406a: IRQ problem, irq_level=%d, giving up\n", irq_level);
-			goto err_release;
-		}
-	}
-#endif
-
-	DEB(printk("NCR53c406a: using port_base 0x%x\n", port_base));
-
-	present = 1;
-	tpnt->proc_name = "NCR53c406a";
-
-	shpnt = scsi_register(tpnt, 0);
-	if (!shpnt) {
-		printk("NCR53c406a: Unable to register host, giving up.\n");
-		goto err_release;
-	}
-
-	if (irq_level > 0) {
-		if (request_irq(irq_level, do_NCR53c406a_intr, 0, "NCR53c406a", shpnt)) {
-			printk("NCR53c406a: unable to allocate IRQ %d\n", irq_level);
-			goto err_free_scsi;
-		}
-		tpnt->can_queue = 1;
-		DEB(printk("NCR53c406a: allocated IRQ %d\n", irq_level));
-	} else if (irq_level == 0) {
-		tpnt->can_queue = 0;
-		DEB(printk("NCR53c406a: No interrupts detected\n"));
-		printk("NCR53c406a driver no longer supports polling interface\n");
-		printk("Please email linux-scsi@vger.kernel.org\n");
-                        
-#if USE_DMA
-		printk("NCR53c406a: No interrupts found and DMA mode defined. Giving up.\n");
-#endif				/* USE_DMA */
-		goto err_free_scsi;
-	} else {
-		DEB(printk("NCR53c406a: Shouldn't get here!\n"));
-		goto err_free_scsi;
-	}
-
-#if USE_DMA
-	dma_chan = DMA_CHAN;
-	if (request_dma(dma_chan, "NCR53c406a") != 0) {
-		printk("NCR53c406a: unable to allocate DMA channel %d\n", dma_chan);
-		goto err_free_irq;
-	}
-
-	DEB(printk("Allocated DMA channel %d\n", dma_chan));
-#endif				/* USE_DMA */
-
-	shpnt->irq = irq_level;
-	shpnt->io_port = port_base;
-	shpnt->n_io_port = 0x10;
-#if USE_DMA
-	shpnt->dma = dma_chan;
-#endif
-
-#if USE_DMA
-	sprintf(info_msg, "NCR53c406a at 0x%x, IRQ %d, DMA channel %d.", port_base, irq_level, dma_chan);
-#else
-	sprintf(info_msg, "NCR53c406a at 0x%x, IRQ %d, %s PIO mode.", port_base, irq_level, fast_pio ? "fast" : "slow");
-#endif
-
-	return (present);
-
-#if USE_DMA
-      err_free_irq:
-	if (irq_level)
-		free_irq(irq_level, shpnt);
-#endif
-      err_free_scsi:
-	scsi_unregister(shpnt);
-      err_release:
-	release_region(port_base, 0x10);
-	return 0;
-}
-
-static int NCR53c406a_release(struct Scsi_Host *shost)
-{
-	if (shost->irq)
-		free_irq(shost->irq, NULL);
-#if USE_DMA
-	if (shost->dma_channel != 0xff)
-		free_dma(shost->dma_channel);
-#endif
-	if (shost->io_port && shost->n_io_port)
-		release_region(shost->io_port, shost->n_io_port);
-
-	scsi_unregister(shost);
-	return 0;
-}
-
-#ifndef MODULE
-/* called from init/main.c */
-static int __init NCR53c406a_setup(char *str)
-{
-	static size_t setup_idx = 0;
-	size_t i;
-	int ints[4];
-
-	DEB(printk("NCR53c406a: Setup called\n");
-	    );
-
-	if (setup_idx >= PORT_COUNT - 1) {
-		printk("NCR53c406a: Setup called too many times.  Bad LILO params?\n");
-		return 0;
-	}
-	get_options(str, 4, ints);
-	if (ints[0] < 1 || ints[0] > 3) {
-		printk("NCR53c406a: Malformed command line\n");
-		printk("NCR53c406a: Usage: ncr53c406a=<PORTBASE>[,<IRQ>[,<FASTPIO>]]\n");
-		return 0;
-	}
-	for (i = 0; i < PORT_COUNT && !port_base; i++)
-		if (ports[i] == ints[1]) {
-			port_base = ints[1];
-			DEB(printk("NCR53c406a: Specified port_base 0x%x\n", port_base);
-			    )
-		}
-	if (!port_base) {
-		printk("NCR53c406a: Invalid PORTBASE 0x%x specified\n", ints[1]);
-		return 0;
-	}
-
-	if (ints[0] > 1) {
-		if (ints[2] == 0) {
-			irq_level = 0;
-			DEB(printk("NCR53c406a: Specified irq %d\n", irq_level);
-			    )
-		} else
-			for (i = 0; i < INTR_COUNT && irq_level < 0; i++)
-				if (intrs[i] == ints[2]) {
-					irq_level = ints[2];
-					DEB(printk("NCR53c406a: Specified irq %d\n", port_base);
-					    )
-				}
-		if (irq_level < 0)
-			printk("NCR53c406a: Invalid IRQ %d specified\n", ints[2]);
-	}
-
-	if (ints[0] > 2)
-		fast_pio = ints[3];
-
-	DEB(printk("NCR53c406a: port_base=0x%x, irq=%d, fast_pio=%d\n", port_base, irq_level, fast_pio);)
-	return 1;
-}
-
-__setup("ncr53c406a=", NCR53c406a_setup);
-
-#endif /* !MODULE */
-
-static const char *NCR53c406a_info(struct Scsi_Host *SChost)
-{
-	DEB(printk("NCR53c406a_info called\n"));
-	return (info_msg);
-}
-
-#if 0
-static void wait_intr(void)
-{
-	unsigned long i = jiffies + WATCHDOG;
-
-	while (time_after(i, jiffies) && !(inb(STAT_REG) & 0xe0)) {	/* wait for a pseudo-interrupt */
-		cpu_relax();
-		barrier();
-	}
-
-	if (time_before_eq(i, jiffies)) {	/* Timed out */
-		rtrc(0);
-		current_SC->result = DID_TIME_OUT << 16;
-		current_SC->SCp.phase = idle;
-		current_SC->scsi_done(current_SC);
-		return;
-	}
-
-	NCR53c406a_intr(NULL);
-}
-#endif
-
-static int NCR53c406a_queue_lck(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
-{
-	int i;
-
-	VDEB(printk("NCR53c406a_queue called\n"));
-        DEB(printk("cmd=%02x, cmd_len=%02x, target=%02x, lun=%02x, bufflen=%d\n", SCpnt->cmnd[0], SCpnt->cmd_len, SCpnt->device->target, (u8)SCpnt->device->lun, scsi_bufflen(SCpnt)));
-
-#if 0
-	VDEB(for (i = 0; i < SCpnt->cmd_len; i++)
-	     printk("cmd[%d]=%02x  ", i, SCpnt->cmnd[i]));
-	VDEB(printk("\n"));
-#endif
-
-	current_SC = SCpnt;
-	current_SC->scsi_done = done;
-	current_SC->SCp.phase = command_ph;
-	current_SC->SCp.Status = 0;
-	current_SC->SCp.Message = 0;
-
-	/* We are locked here already by the mid layer */
-	REG0;
-	outb(scmd_id(SCpnt), DEST_ID);	/* set destination */
-	outb(FLUSH_FIFO, CMD_REG);	/* reset the fifos */
-
-	for (i = 0; i < SCpnt->cmd_len; i++) {
-		outb(SCpnt->cmnd[i], SCSI_FIFO);
-	}
-	outb(SELECT_NO_ATN, CMD_REG);
-
-	rtrc(1);
-	return 0;
-}
-
-static DEF_SCSI_QCMD(NCR53c406a_queue)
-
-static int NCR53c406a_host_reset(Scsi_Cmnd * SCpnt)
-{
-	DEB(printk("NCR53c406a_reset called\n"));
-
-	spin_lock_irq(SCpnt->device->host->host_lock);
-
-	outb(C4_IMG, CONFIG4);	/* Select reg set 0 */
-	outb(CHIP_RESET, CMD_REG);
-	outb(SCSI_NOP, CMD_REG);	/* required after reset */
-	outb(SCSI_RESET, CMD_REG);
-	chip_init();
-
-	rtrc(2);
-
-	spin_unlock_irq(SCpnt->device->host->host_lock);
-
-	return SUCCESS;
-}
-
-static int NCR53c406a_biosparm(struct scsi_device *disk,
-                               struct block_device *dev,
-			       sector_t capacity, int *info_array)
-{
-	int size;
-
-	DEB(printk("NCR53c406a_biosparm called\n"));
-
-	size = capacity;
-	info_array[0] = 64;	/* heads */
-	info_array[1] = 32;	/* sectors */
-	info_array[2] = size >> 11;	/* cylinders */
-	if (info_array[2] > 1024) {	/* big disk */
-		info_array[0] = 255;
-		info_array[1] = 63;
-		info_array[2] = size / (255 * 63);
-	}
-	return 0;
-}
-
-static irqreturn_t do_NCR53c406a_intr(int unused, void *dev_id)
-{
-	unsigned long flags;
-	struct Scsi_Host *dev = dev_id;
-
-	spin_lock_irqsave(dev->host_lock, flags);
-	NCR53c406a_intr(dev_id);
-	spin_unlock_irqrestore(dev->host_lock, flags);
-	return IRQ_HANDLED;
-}
-
-static void NCR53c406a_intr(void *dev_id)
-{
-	DEB(unsigned char fifo_size;
-	    )
-	    DEB(unsigned char seq_reg;
-	    )
-	unsigned char status, int_reg;
-#if USE_PIO
-	unsigned char pio_status;
-	struct scatterlist *sg;
-        int i;
-#endif
-
-	VDEB(printk("NCR53c406a_intr called\n"));
-
-#if USE_PIO
-	REG1;
-	pio_status = inb(PIO_STATUS);
-#endif
-	REG0;
-	status = inb(STAT_REG);
-	DEB(seq_reg = inb(SEQ_REG));
-	int_reg = inb(INT_REG);
-	DEB(fifo_size = inb(FIFO_FLAGS) & 0x1f);
-
-#if NCR53C406A_DEBUG
-	printk("status=%02x, seq_reg=%02x, int_reg=%02x, fifo_size=%02x", status, seq_reg, int_reg, fifo_size);
-#if (USE_DMA)
-	printk("\n");
-#else
-	printk(", pio=%02x\n", pio_status);
-#endif				/* USE_DMA */
-#endif				/* NCR53C406A_DEBUG */
-
-	if (int_reg & 0x80) {	/* SCSI reset intr */
-		rtrc(3);
-		DEB(printk("NCR53c406a: reset intr received\n"));
-		current_SC->SCp.phase = idle;
-		current_SC->result = DID_RESET << 16;
-		current_SC->scsi_done(current_SC);
-		return;
-	}
-#if USE_PIO
-	if (pio_status & 0x80) {
-		printk("NCR53C406A: Warning: PIO error!\n");
-		current_SC->SCp.phase = idle;
-		current_SC->result = DID_ERROR << 16;
-		current_SC->scsi_done(current_SC);
-		return;
-	}
-#endif				/* USE_PIO */
-
-	if (status & 0x20) {	/* Parity error */
-		printk("NCR53c406a: Warning: parity error!\n");
-		current_SC->SCp.phase = idle;
-		current_SC->result = DID_PARITY << 16;
-		current_SC->scsi_done(current_SC);
-		return;
-	}
-
-	if (status & 0x40) {	/* Gross error */
-		printk("NCR53c406a: Warning: gross error!\n");
-		current_SC->SCp.phase = idle;
-		current_SC->result = DID_ERROR << 16;
-		current_SC->scsi_done(current_SC);
-		return;
-	}
-
-	if (int_reg & 0x20) {	/* Disconnect */
-		DEB(printk("NCR53c406a: disconnect intr received\n"));
-		if (current_SC->SCp.phase != message_in) {	/* Unexpected disconnect */
-			current_SC->result = DID_NO_CONNECT << 16;
-		} else {	/* Command complete, return status and message */
-			current_SC->result = (current_SC->SCp.Status & 0xff)
-			    | ((current_SC->SCp.Message & 0xff) << 8) | (DID_OK << 16);
-		}
-
-		rtrc(0);
-		current_SC->SCp.phase = idle;
-		current_SC->scsi_done(current_SC);
-		return;
-	}
-
-	switch (status & 0x07) {	/* scsi phase */
-	case 0x00:		/* DATA-OUT */
-		if (int_reg & 0x10) {	/* Target requesting info transfer */
-			rtrc(5);
-			current_SC->SCp.phase = data_out;
-			VDEB(printk("NCR53c406a: Data-Out phase\n"));
-			outb(FLUSH_FIFO, CMD_REG);
-			LOAD_DMA_COUNT(scsi_bufflen(current_SC));	/* Max transfer size */
-#if USE_DMA			/* No s/g support for DMA */
-			NCR53c406a_dma_write(scsi_sglist(current_SC),
-                                             scsdi_bufflen(current_SC));
-
-#endif				/* USE_DMA */
-			outb(TRANSFER_INFO | DMA_OP, CMD_REG);
-#if USE_PIO
-                        scsi_for_each_sg(current_SC, sg, scsi_sg_count(current_SC), i) {
-                                NCR53c406a_pio_write(sg_virt(sg), sg->length);
-                        }
-			REG0;
-#endif				/* USE_PIO */
-		}
-		break;
-
-	case 0x01:		/* DATA-IN */
-		if (int_reg & 0x10) {	/* Target requesting info transfer */
-			rtrc(6);
-			current_SC->SCp.phase = data_in;
-			VDEB(printk("NCR53c406a: Data-In phase\n"));
-			outb(FLUSH_FIFO, CMD_REG);
-			LOAD_DMA_COUNT(scsi_bufflen(current_SC));	/* Max transfer size */
-#if USE_DMA			/* No s/g support for DMA */
-			NCR53c406a_dma_read(scsi_sglist(current_SC),
-                                            scsdi_bufflen(current_SC));
-#endif				/* USE_DMA */
-			outb(TRANSFER_INFO | DMA_OP, CMD_REG);
-#if USE_PIO
-                        scsi_for_each_sg(current_SC, sg, scsi_sg_count(current_SC), i) {
-                                NCR53c406a_pio_read(sg_virt(sg), sg->length);
-                        }
-			REG0;
-#endif				/* USE_PIO */
-		}
-		break;
-
-	case 0x02:		/* COMMAND */
-		current_SC->SCp.phase = command_ph;
-		printk("NCR53c406a: Warning: Unknown interrupt occurred in command phase!\n");
-		break;
-
-	case 0x03:		/* STATUS */
-		rtrc(7);
-		current_SC->SCp.phase = status_ph;
-		VDEB(printk("NCR53c406a: Status phase\n"));
-		outb(FLUSH_FIFO, CMD_REG);
-		outb(INIT_CMD_COMPLETE, CMD_REG);
-		break;
-
-	case 0x04:		/* Reserved */
-	case 0x05:		/* Reserved */
-		printk("NCR53c406a: WARNING: Reserved phase!!!\n");
-		break;
-
-	case 0x06:		/* MESSAGE-OUT */
-		DEB(printk("NCR53c406a: Message-Out phase\n"));
-		current_SC->SCp.phase = message_out;
-		outb(SET_ATN, CMD_REG);	/* Reject the message */
-		outb(MSG_ACCEPT, CMD_REG);
-		break;
-
-	case 0x07:		/* MESSAGE-IN */
-		rtrc(4);
-		VDEB(printk("NCR53c406a: Message-In phase\n"));
-		current_SC->SCp.phase = message_in;
-
-		current_SC->SCp.Status = inb(SCSI_FIFO);
-		current_SC->SCp.Message = inb(SCSI_FIFO);
-
-		VDEB(printk("SCSI FIFO size=%d\n", inb(FIFO_FLAGS) & 0x1f));
-		DEB(printk("Status = %02x  Message = %02x\n", current_SC->SCp.Status, current_SC->SCp.Message));
-
-		if (current_SC->SCp.Message == SAVE_POINTERS || current_SC->SCp.Message == DISCONNECT) {
-			outb(SET_ATN, CMD_REG);	/* Reject message */
-			DEB(printk("Discarding SAVE_POINTERS message\n"));
-		}
-		outb(MSG_ACCEPT, CMD_REG);
-		break;
-	}
-}
-
-#ifndef IRQ_LEV
-static int irq_probe(void)
-{
-	int irqs, irq;
-	unsigned long i;
-
-	inb(INT_REG);		/* clear the interrupt register */
-	irqs = probe_irq_on();
-
-	/* Invalid command will cause an interrupt */
-	REG0;
-	outb(0xff, CMD_REG);
-
-	/* Wait for the interrupt to occur */
-	i = jiffies + WATCHDOG;
-	while (time_after(i, jiffies) && !(inb(STAT_REG) & 0x80))
-		barrier();
-	if (time_before_eq(i, jiffies)) {	/* Timed out, must be hardware trouble */
-		probe_irq_off(irqs);
-		return -1;
-	}
-
-	irq = probe_irq_off(irqs);
-
-	/* Kick the chip */
-	outb(CHIP_RESET, CMD_REG);
-	outb(SCSI_NOP, CMD_REG);
-	chip_init();
-
-	return irq;
-}
-#endif				/* IRQ_LEV */
-
-static void chip_init(void)
-{
-	REG1;
-#if USE_DMA
-	outb(0x00, PIO_STATUS);
-#else				/* USE_PIO */
-	outb(0x01, PIO_STATUS);
-#endif
-	outb(0x00, PIO_FLAG);
-
-	outb(C4_IMG, CONFIG4);	/* REG0; */
-	outb(C3_IMG, CONFIG3);
-	outb(C2_IMG, CONFIG2);
-	outb(C1_IMG, CONFIG1);
-
-	outb(0x05, CLKCONV);	/* clock conversion factor */
-	outb(0x9C, SRTIMOUT);	/* Selection timeout */
-	outb(0x05, SYNCPRD);	/* Synchronous transfer period */
-	outb(SYNC_MODE, SYNCOFF);	/* synchronous mode */
-}
-
-static void __init calc_port_addr(void)
-{
-	/* Control Register Set 0 */
-	TC_LSB = (port_base + 0x00);
-	TC_MSB = (port_base + 0x01);
-	SCSI_FIFO = (port_base + 0x02);
-	CMD_REG = (port_base + 0x03);
-	STAT_REG = (port_base + 0x04);
-	DEST_ID = (port_base + 0x04);
-	INT_REG = (port_base + 0x05);
-	SRTIMOUT = (port_base + 0x05);
-	SEQ_REG = (port_base + 0x06);
-	SYNCPRD = (port_base + 0x06);
-	FIFO_FLAGS = (port_base + 0x07);
-	SYNCOFF = (port_base + 0x07);
-	CONFIG1 = (port_base + 0x08);
-	CLKCONV = (port_base + 0x09);
-	/* TESTREG          = (port_base+0x0A); */
-	CONFIG2 = (port_base + 0x0B);
-	CONFIG3 = (port_base + 0x0C);
-	CONFIG4 = (port_base + 0x0D);
-	TC_HIGH = (port_base + 0x0E);
-	/* FIFO_BOTTOM      = (port_base+0x0F); */
-
-	/* Control Register Set 1 */
-	/* JUMPER_SENSE     = (port_base+0x00); */
-	/* SRAM_PTR         = (port_base+0x01); */
-	/* SRAM_DATA        = (port_base+0x02); */
-	PIO_FIFO = (port_base + 0x04);
-	/* PIO_FIFO1        = (port_base+0x05); */
-	/* PIO_FIFO2        = (port_base+0x06); */
-	/* PIO_FIFO3        = (port_base+0x07); */
-	PIO_STATUS = (port_base + 0x08);
-	/* ATA_CMD          = (port_base+0x09); */
-	/* ATA_ERR          = (port_base+0x0A); */
-	PIO_FLAG = (port_base + 0x0B);
-	CONFIG5 = (port_base + 0x0D);
-	/* SIGNATURE        = (port_base+0x0E); */
-	/* CONFIG6          = (port_base+0x0F); */
-}
-
-MODULE_LICENSE("GPL");
-
-/* NOTE:  scatter-gather support only works in PIO mode.
- * Use SG_NONE if DMA mode is enabled!
- */
-
-static struct scsi_host_template driver_template =
-{
-     .proc_name         	= "NCR53c406a"		/* proc_name */,        
-     .name              	= "NCR53c406a"		/* name */,             
-     .detect            	= NCR53c406a_detect	/* detect */,           
-     .release            	= NCR53c406a_release,
-     .info              	= NCR53c406a_info		/* info */,             
-     .queuecommand      	= NCR53c406a_queue	/* queuecommand */,     
-     .eh_host_reset_handler     = NCR53c406a_host_reset	/* reset */,            
-     .bios_param        	= NCR53c406a_biosparm	/* biosparm */,         
-     .can_queue         	= 1			/* can_queue */,        
-     .this_id           	= 7			/* SCSI ID of the chip */,
-     .sg_tablesize      	= 32			/*SG_ALL*/ /*SG_NONE*/, 
-     .unchecked_isa_dma 	= 1			/* unchecked_isa_dma */,
-     .use_clustering    	= ENABLE_CLUSTERING,
-};
-
-#include "scsi_module.c"
-
-/*
- * Overrides for Emacs so that we get a uniform tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 4
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -4
- * c-argdecl-indent: 4
- * c-label-offset: -4
- * c-continued-statement-offset: 4
- * c-continued-brace-offset: 0
- * indent-tabs-mode: nil
- * tab-width: 8
- * End:
- */