[SCSI] hpsa: Allow multiple command completions per interrupt.

This is done by adding support for the so-called "performant mode"
(that's really what they called it).  Smart Array controllers
have a mode which enables multiple command completions to be
delivered with a single interrupt, "performant" mode.  We want to use
that mode, as some newer controllers will be requiring this mode.

Signed-off-by: Don Brace <brace@beardog.cce.hp.com>
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Mike Miller <mikem@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

3 files changed, 404 insertions, 66 deletions

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 314854b455d2..e518766f9fe0 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -150,6 +150,11 @@ static int check_for_unit_attention(struct ctlr_info *h,
 	struct CommandList *c);
 static void check_ioctl_unit_attention(struct ctlr_info *h,
 	struct CommandList *c);
+/* performant mode helper functions */
+static void calc_bucket_map(int *bucket, int num_buckets,
+	int nsgs, int *bucket_map);
+static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h);
+static inline u32 next_command(struct ctlr_info *h);
 
 static DEVICE_ATTR(raid_level, S_IRUGO, raid_level_show, NULL);
 static DEVICE_ATTR(lunid, S_IRUGO, lunid_show, NULL);
@@ -173,10 +178,8 @@ static struct scsi_host_template hpsa_driver_template = {
 	.name			= "hpsa",
 	.proc_name		= "hpsa",
 	.queuecommand		= hpsa_scsi_queue_command,
-	.can_queue		= 512,
 	.this_id		= -1,
 	.sg_tablesize		= MAXSGENTRIES,
-	.cmd_per_lun		= 512,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.eh_device_reset_handler = hpsa_eh_device_reset_handler,
 	.ioctl			= hpsa_ioctl,
@@ -394,10 +397,44 @@ static inline void addQ(struct hlist_head *list, struct CommandList *c)
 	hlist_add_head(&c->list, list);
 }
 
+static inline u32 next_command(struct ctlr_info *h)
+{
+	u32 a;
+
+	if (unlikely(h->transMethod != CFGTBL_Trans_Performant))
+		return h->access.command_completed(h);
+
+	if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
+		a = *(h->reply_pool_head); /* Next cmd in ring buffer */
+		(h->reply_pool_head)++;
+		h->commands_outstanding--;
+	} else {
+		a = FIFO_EMPTY;
+	}
+	/* Check for wraparound */
+	if (h->reply_pool_head == (h->reply_pool + h->max_commands)) {
+		h->reply_pool_head = h->reply_pool;
+		h->reply_pool_wraparound ^= 1;
+	}
+	return a;
+}
+
+/* set_performant_mode: Modify the tag for cciss performant
+ * set bit 0 for pull model, bits 3-1 for block fetch
+ * register number
+ */
+static void set_performant_mode(struct ctlr_info *h, struct CommandList *c)
+{
+	if (likely(h->transMethod == CFGTBL_Trans_Performant))
+		c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1);
+}
+
 static void enqueue_cmd_and_start_io(struct ctlr_info *h,
 	struct CommandList *c)
 {
 	unsigned long flags;
+
+	set_performant_mode(h, c);
 	spin_lock_irqsave(&h->lock, flags);
 	addQ(&h->reqQ, c);
 	h->Qdepth++;
@@ -1116,9 +1153,11 @@ static int hpsa_scsi_detect(struct ctlr_info *h)
 	sh->max_cmd_len = MAX_COMMAND_SIZE;
 	sh->max_lun = HPSA_MAX_LUN;
 	sh->max_id = HPSA_MAX_LUN;
+	sh->can_queue = h->nr_cmds;
+	sh->cmd_per_lun = h->nr_cmds;
 	h->scsi_host = sh;
 	sh->hostdata[0] = (unsigned long) h;
-	sh->irq = h->intr[SIMPLE_MODE_INT];
+	sh->irq = h->intr[PERF_MODE_INT];
 	sh->unique_id = sh->irq;
 	error = scsi_add_host(sh, &h->pdev->dev);
 	if (error)
@@ -1843,7 +1882,8 @@ static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd,
 	c->scsi_cmd = cmd;
 	c->Header.ReplyQueue = 0;  /* unused in simple mode */
 	memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8);
-	c->Header.Tag.lower = c->busaddr;  /* Use k. address of cmd as tag */
+	c->Header.Tag.lower = (c->cmdindex << DIRECT_LOOKUP_SHIFT);
+	c->Header.Tag.lower |= DIRECT_LOOKUP_BIT;
 
 	/* Fill in the request block... */
 
@@ -2700,8 +2740,9 @@ static inline bool interrupt_pending(struct ctlr_info *h)
 
 static inline long interrupt_not_for_us(struct ctlr_info *h)
 {
-	return ((h->access.intr_pending(h) == 0) ||
-		 (h->interrupts_enabled == 0));
+	return !(h->msi_vector || h->msix_vector) &&
+		((h->access.intr_pending(h) == 0) ||
+		(h->interrupts_enabled == 0));
 }
 
 static inline int bad_tag(struct ctlr_info *h, u32 tag_index,
@@ -2725,13 +2766,13 @@ static inline void finish_cmd(struct CommandList *c, u32 raw_tag)
 
 static inline u32 hpsa_tag_contains_index(u32 tag)
 {
-#define DIRECT_LOOKUP_BIT 0x04
+#define DIRECT_LOOKUP_BIT 0x10
 	return tag & DIRECT_LOOKUP_BIT;
 }
 
 static inline u32 hpsa_tag_to_index(u32 tag)
 {
-#define DIRECT_LOOKUP_SHIFT 3
+#define DIRECT_LOOKUP_SHIFT 5
 	return tag >> DIRECT_LOOKUP_SHIFT;
 }
 
@@ -2741,42 +2782,61 @@ static inline u32 hpsa_tag_discard_error_bits(u32 tag)
 	return tag & ~HPSA_ERROR_BITS;
 }
 
+/* process completion of an indexed ("direct lookup") command */
+static inline u32 process_indexed_cmd(struct ctlr_info *h,
+	u32 raw_tag)
+{
+	u32 tag_index;
+	struct CommandList *c;
+
+	tag_index = hpsa_tag_to_index(raw_tag);
+	if (bad_tag(h, tag_index, raw_tag))
+		return next_command(h);
+	c = h->cmd_pool + tag_index;
+	finish_cmd(c, raw_tag);
+	return next_command(h);
+}
+
+/* process completion of a non-indexed command */
+static inline u32 process_nonindexed_cmd(struct ctlr_info *h,
+	u32 raw_tag)
+{
+	u32 tag;
+	struct CommandList *c = NULL;
+	struct hlist_node *tmp;
+
+	tag = hpsa_tag_discard_error_bits(raw_tag);
+	hlist_for_each_entry(c, tmp, &h->cmpQ, list) {
+		if ((c->busaddr & 0xFFFFFFE0) == (tag & 0xFFFFFFE0)) {
+			finish_cmd(c, raw_tag);
+			return next_command(h);
+		}
+	}
+	bad_tag(h, h->nr_cmds + 1, raw_tag);
+	return next_command(h);
+}
+
 static irqreturn_t do_hpsa_intr(int irq, void *dev_id)
 {
 	struct ctlr_info *h = dev_id;
-	struct CommandList *c;
 	unsigned long flags;
-	u32 raw_tag, tag, tag_index;
-	struct hlist_node *tmp;
+	u32 raw_tag;
 
 	if (interrupt_not_for_us(h))
 		return IRQ_NONE;
 	spin_lock_irqsave(&h->lock, flags);
-	while (interrupt_pending(h)) {
-		while ((raw_tag = get_next_completion(h)) != FIFO_EMPTY) {
-			if (likely(hpsa_tag_contains_index(raw_tag))) {
-				tag_index = hpsa_tag_to_index(raw_tag);
-				if (bad_tag(h, tag_index, raw_tag))
-					return IRQ_HANDLED;
-				c = h->cmd_pool + tag_index;
-				finish_cmd(c, raw_tag);
-				continue;
-			}
-			tag = hpsa_tag_discard_error_bits(raw_tag);
-			c = NULL;
-			hlist_for_each_entry(c, tmp, &h->cmpQ, list) {
-				if (c->busaddr == tag) {
-					finish_cmd(c, raw_tag);
-					break;
-				}
-			}
-		}
+	raw_tag = get_next_completion(h);
+	while (raw_tag != FIFO_EMPTY) {
+		if (hpsa_tag_contains_index(raw_tag))
+			raw_tag = process_indexed_cmd(h, raw_tag);
+		else
+			raw_tag = process_nonindexed_cmd(h, raw_tag);
 	}
 	spin_unlock_irqrestore(&h->lock, flags);
 	return IRQ_HANDLED;
 }
 
-/* Send a message CDB to the firmware. */
+/* Send a message CDB to the firmwart. */
 static __devinit int hpsa_message(struct pci_dev *pdev, unsigned char opcode,
 						unsigned char type)
 {
@@ -3108,7 +3168,7 @@ static void __devinit hpsa_interrupt_mode(struct ctlr_info *h,
 default_int_mode:
 #endif				/* CONFIG_PCI_MSI */
 	/* if we get here we're going to use the default interrupt mode */
-	h->intr[SIMPLE_MODE_INT] = pdev->irq;
+	h->intr[PERF_MODE_INT] = pdev->irq;
 }
 
 static int hpsa_pci_init(struct ctlr_info *h, struct pci_dev *pdev)
@@ -3118,6 +3178,7 @@ static int hpsa_pci_init(struct ctlr_info *h, struct pci_dev *pdev)
 	u64 cfg_offset;
 	u32 cfg_base_addr;
 	u64 cfg_base_addr_index;
+	u32 trans_offset;
 	int i, prod_index, err;
 
 	subsystem_vendor_id = pdev->subsystem_vendor;
@@ -3211,11 +3272,14 @@ static int hpsa_pci_init(struct ctlr_info *h, struct pci_dev *pdev)
 	h->cfgtable = remap_pci_mem(pci_resource_start(pdev,
 			       cfg_base_addr_index) + cfg_offset,
 				sizeof(h->cfgtable));
-	h->board_id = board_id;
-
-	/* Query controller for max supported commands: */
-	h->max_commands = readl(&(h->cfgtable->CmdsOutMax));
+	/* Find performant mode table. */
+	trans_offset = readl(&(h->cfgtable->TransMethodOffset));
+	h->transtable = remap_pci_mem(pci_resource_start(pdev,
+				cfg_base_addr_index)+cfg_offset+trans_offset,
+				sizeof(*h->transtable));
 
+	h->board_id = board_id;
+	h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
 	h->product_name = products[prod_index].product_name;
 	h->access = *(products[prod_index].access);
 	/* Allow room for some ioctls */
@@ -3314,7 +3378,12 @@ static int __devinit hpsa_init_one(struct pci_dev *pdev,
 		}
 	}
 
-	BUILD_BUG_ON(sizeof(struct CommandList) % 8);
+	/* Command structures must be aligned on a 32-byte boundary because
+	 * the 5 lower bits of the address are used by the hardware. and by
+	 * the driver.  See comments in hpsa.h for more info.
+	 */
+#define COMMANDLIST_ALIGNMENT 32
+	BUILD_BUG_ON(sizeof(struct CommandList) % COMMANDLIST_ALIGNMENT);
 	h = kzalloc(sizeof(*h), GFP_KERNEL);
 	if (!h)
 		return -ENOMEM;
@@ -3349,17 +3418,17 @@ static int __devinit hpsa_init_one(struct pci_dev *pdev,
 
 	/* make sure the board interrupts are off */
 	h->access.set_intr_mask(h, HPSA_INTR_OFF);
-	rc = request_irq(h->intr[SIMPLE_MODE_INT], do_hpsa_intr,
-			IRQF_DISABLED | IRQF_SHARED, h->devname, h);
+	rc = request_irq(h->intr[PERF_MODE_INT], do_hpsa_intr,
+			IRQF_DISABLED, h->devname, h);
 	if (rc) {
 		dev_err(&pdev->dev, "unable to get irq %d for %s\n",
-		       h->intr[SIMPLE_MODE_INT], h->devname);
+		       h->intr[PERF_MODE_INT], h->devname);
 		goto clean2;
 	}
 
-	dev_info(&pdev->dev, "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
-	       h->devname, pdev->device, pci_name(pdev),
-	       h->intr[SIMPLE_MODE_INT], dac ? "" : " not");
+	dev_info(&pdev->dev, "%s: <0x%x> at IRQ %d%s using DAC\n",
+	       h->devname, pdev->device,
+	       h->intr[PERF_MODE_INT], dac ? "" : " not");
 
 	h->cmd_pool_bits =
 	    kmalloc(((h->nr_cmds + BITS_PER_LONG -
@@ -3389,6 +3458,7 @@ static int __devinit hpsa_init_one(struct pci_dev *pdev,
 	/* Turn the interrupts on so we can service requests */
 	h->access.set_intr_mask(h, HPSA_INTR_ON);
 
+	hpsa_put_ctlr_into_performant_mode(h);
 	hpsa_register_scsi(h);	/* hook ourselves into SCSI subsystem */
 	h->busy_initializing = 0;
 	return 1;
@@ -3404,7 +3474,7 @@ clean4:
 			    h->nr_cmds * sizeof(struct ErrorInfo),
 			    h->errinfo_pool,
 			    h->errinfo_pool_dhandle);
-	free_irq(h->intr[SIMPLE_MODE_INT], h);
+	free_irq(h->intr[PERF_MODE_INT], h);
 clean2:
 clean1:
 	h->busy_initializing = 0;
@@ -3448,7 +3518,7 @@ static void hpsa_shutdown(struct pci_dev *pdev)
 	 */
 	hpsa_flush_cache(h);
 	h->access.set_intr_mask(h, HPSA_INTR_OFF);
-	free_irq(h->intr[2], h);
+	free_irq(h->intr[PERF_MODE_INT], h);
 #ifdef CONFIG_PCI_MSI
 	if (h->msix_vector)
 		pci_disable_msix(h->pdev);
@@ -3477,7 +3547,10 @@ static void __devexit hpsa_remove_one(struct pci_dev *pdev)
 	pci_free_consistent(h->pdev,
 		h->nr_cmds * sizeof(struct ErrorInfo),
 		h->errinfo_pool, h->errinfo_pool_dhandle);
+	pci_free_consistent(h->pdev, h->reply_pool_size,
+		h->reply_pool, h->reply_pool_dhandle);
 	kfree(h->cmd_pool_bits);
+	kfree(h->blockFetchTable);
 	/*
 	 * Deliberately omit pci_disable_device(): it does something nasty to
 	 * Smart Array controllers that pci_enable_device does not undo
@@ -3509,6 +3582,129 @@ static struct pci_driver hpsa_pci_driver = {
 	.resume = hpsa_resume,
 };
 
+/* Fill in bucket_map[], given nsgs (the max number of
+ * scatter gather elements supported) and bucket[],
+ * which is an array of 8 integers.  The bucket[] array
+ * contains 8 different DMA transfer sizes (in 16
+ * byte increments) which the controller uses to fetch
+ * commands.  This function fills in bucket_map[], which
+ * maps a given number of scatter gather elements to one of
+ * the 8 DMA transfer sizes.  The point of it is to allow the
+ * controller to only do as much DMA as needed to fetch the
+ * command, with the DMA transfer size encoded in the lower
+ * bits of the command address.
+ */
+static void  calc_bucket_map(int bucket[], int num_buckets,
+	int nsgs, int *bucket_map)
+{
+	int i, j, b, size;
+
+	/* even a command with 0 SGs requires 4 blocks */
+#define MINIMUM_TRANSFER_BLOCKS 4
+#define NUM_BUCKETS 8
+	/* Note, bucket_map must have nsgs+1 entries. */
+	for (i = 0; i <= nsgs; i++) {
+		/* Compute size of a command with i SG entries */
+		size = i + MINIMUM_TRANSFER_BLOCKS;
+		b = num_buckets; /* Assume the biggest bucket */
+		/* Find the bucket that is just big enough */
+		for (j = 0; j < 8; j++) {
+			if (bucket[j] >= size) {
+				b = j;
+				break;
+			}
+		}
+		/* for a command with i SG entries, use bucket b. */
+		bucket_map[i] = b;
+	}
+}
+
+static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h)
+{
+	u32 trans_support;
+	u64 trans_offset;
+	/*  5 = 1 s/g entry or 4k
+	 *  6 = 2 s/g entry or 8k
+	 *  8 = 4 s/g entry or 16k
+	 * 10 = 6 s/g entry or 24k
+	 */
+	int bft[8] = {5, 6, 8, 10, 12, 20, 28, 35}; /* for scatter/gathers */
+	int i = 0;
+	int l = 0;
+	unsigned long register_value;
+
+	trans_support = readl(&(h->cfgtable->TransportSupport));
+	if (!(trans_support & PERFORMANT_MODE))
+		return;
+
+	h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
+	h->max_sg_entries = 32;
+	/* Performant mode ring buffer and supporting data structures */
+	h->reply_pool_size = h->max_commands * sizeof(u64);
+	h->reply_pool = pci_alloc_consistent(h->pdev, h->reply_pool_size,
+				&(h->reply_pool_dhandle));
+
+	/* Need a block fetch table for performant mode */
+	h->blockFetchTable = kmalloc(((h->max_sg_entries+1) *
+				sizeof(u32)), GFP_KERNEL);
+
+	if ((h->reply_pool == NULL)
+		|| (h->blockFetchTable == NULL))
+		goto clean_up;
+
+	h->reply_pool_wraparound = 1; /* spec: init to 1 */
+
+	/* Controller spec: zero out this buffer. */
+	memset(h->reply_pool, 0, h->reply_pool_size);
+	h->reply_pool_head = h->reply_pool;
+
+	trans_offset = readl(&(h->cfgtable->TransMethodOffset));
+	bft[7] = h->max_sg_entries + 4;
+	calc_bucket_map(bft, ARRAY_SIZE(bft), 32, h->blockFetchTable);
+	for (i = 0; i < 8; i++)
+		writel(bft[i], &h->transtable->BlockFetch[i]);
+
+	/* size of controller ring buffer */
+	writel(h->max_commands, &h->transtable->RepQSize);
+	writel(1, &h->transtable->RepQCount);
+	writel(0, &h->transtable->RepQCtrAddrLow32);
+	writel(0, &h->transtable->RepQCtrAddrHigh32);
+	writel(h->reply_pool_dhandle, &h->transtable->RepQAddr0Low32);
+	writel(0, &h->transtable->RepQAddr0High32);
+	writel(CFGTBL_Trans_Performant,
+		&(h->cfgtable->HostWrite.TransportRequest));
+	writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
+	/* under certain very rare conditions, this can take awhile.
+	 * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
+	 * as we enter this code.) */
+	for (l = 0; l < MAX_CONFIG_WAIT; l++) {
+		register_value = readl(h->vaddr + SA5_DOORBELL);
+		if (!(register_value & CFGTBL_ChangeReq))
+			break;
+		/* delay and try again */
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule_timeout(10);
+	}
+	register_value = readl(&(h->cfgtable->TransportActive));
+	if (!(register_value & CFGTBL_Trans_Performant)) {
+		dev_warn(&h->pdev->dev, "unable to get board into"
+					" performant mode\n");
+		return;
+	}
+
+	/* Change the access methods to the performant access methods */
+	h->access = SA5_performant_access;
+	h->transMethod = CFGTBL_Trans_Performant;
+
+	return;
+
+clean_up:
+	if (h->reply_pool)
+		pci_free_consistent(h->pdev, h->reply_pool_size,
+			h->reply_pool, h->reply_pool_dhandle);
+	kfree(h->blockFetchTable);
+}
+
 /*
  *  This is it.  Register the PCI driver information for the cards we control
  *  the OS will call our registered routines when it finds one of our cards.
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 0eab386a03be..0ba1aa3f4d4d 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -60,14 +60,15 @@ struct ctlr_info {
 	unsigned long paddr;
 	int 	nr_cmds; /* Number of commands allowed on this controller */
 	struct CfgTable __iomem *cfgtable;
+	int     max_sg_entries;
 	int	interrupts_enabled;
 	int	major;
 	int 	max_commands;
 	int	commands_outstanding;
 	int 	max_outstanding; /* Debug */
 	int	usage_count;  /* number of opens all all minor devices */
-#	define DOORBELL_INT	0
-#	define PERF_MODE_INT	1
+#	define PERF_MODE_INT	0
+#	define DOORBELL_INT	1
 #	define SIMPLE_MODE_INT	2
 #	define MEMQ_MODE_INT	3
 	unsigned int intr[4];
@@ -102,6 +103,23 @@ struct ctlr_info {
 	int ndevices; /* number of used elements in .dev[] array. */
 #define HPSA_MAX_SCSI_DEVS_PER_HBA 256
 	struct hpsa_scsi_dev_t *dev[HPSA_MAX_SCSI_DEVS_PER_HBA];
+	/*
+	 * Performant mode tables.
+	 */
+	u32 trans_support;
+	u32 trans_offset;
+	struct TransTable_struct *transtable;
+	unsigned long transMethod;
+
+	/*
+	 * Performant mode completion buffer
+	 */
+	u64 *reply_pool;
+	dma_addr_t reply_pool_dhandle;
+	u64 *reply_pool_head;
+	size_t reply_pool_size;
+	unsigned char reply_pool_wraparound;
+	u32 *blockFetchTable;
 };
 #define HPSA_ABORT_MSG 0
 #define HPSA_DEVICE_RESET_MSG 1
@@ -165,6 +183,16 @@ struct ctlr_info {
 
 #define HPSA_ERROR_BIT		0x02
 
+/* Performant mode flags */
+#define SA5_PERF_INTR_PENDING   0x04
+#define SA5_PERF_INTR_OFF       0x05
+#define SA5_OUTDB_STATUS_PERF_BIT       0x01
+#define SA5_OUTDB_CLEAR_PERF_BIT        0x01
+#define SA5_OUTDB_CLEAR         0xA0
+#define SA5_OUTDB_CLEAR_PERF_BIT        0x01
+#define SA5_OUTDB_STATUS        0x9C
+
+
 #define HPSA_INTR_ON 	1
 #define HPSA_INTR_OFF	0
 /*
@@ -173,7 +201,8 @@ struct ctlr_info {
 static void SA5_submit_command(struct ctlr_info *h,
 	struct CommandList *c)
 {
-	dev_dbg(&h->pdev->dev, "Sending %x\n", c->busaddr);
+	dev_dbg(&h->pdev->dev, "Sending %x, tag = %x\n", c->busaddr,
+		c->Header.Tag.lower);
 	writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
 	h->commands_outstanding++;
 	if (h->commands_outstanding > h->max_outstanding)
@@ -196,6 +225,52 @@ static void SA5_intr_mask(struct ctlr_info *h, unsigned long val)
 			h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 	}
 }
+
+static void SA5_performant_intr_mask(struct ctlr_info *h, unsigned long val)
+{
+	if (val) { /* turn on interrupts */
+		h->interrupts_enabled = 1;
+		writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+	} else {
+		h->interrupts_enabled = 0;
+		writel(SA5_PERF_INTR_OFF,
+			h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
+	}
+}
+
+static unsigned long SA5_performant_completed(struct ctlr_info *h)
+{
+	unsigned long register_value = FIFO_EMPTY;
+
+	/* flush the controller write of the reply queue by reading
+	 * outbound doorbell status register.
+	 */
+	register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+	/* msi auto clears the interrupt pending bit. */
+	if (!(h->msi_vector || h->msix_vector)) {
+		writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR);
+		/* Do a read in order to flush the write to the controller
+		 * (as per spec.)
+		 */
+		register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+	}
+
+	if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
+		register_value = *(h->reply_pool_head);
+		(h->reply_pool_head)++;
+		h->commands_outstanding--;
+	} else {
+		register_value = FIFO_EMPTY;
+	}
+	/* Check for wraparound */
+	if (h->reply_pool_head == (h->reply_pool + h->max_commands)) {
+		h->reply_pool_head = h->reply_pool;
+		h->reply_pool_wraparound ^= 1;
+	}
+
+	return register_value;
+}
+
 /*
  *  Returns true if fifo is full.
  *
@@ -241,6 +316,20 @@ static bool SA5_intr_pending(struct ctlr_info *h)
 	return register_value & SA5_INTR_PENDING;
 }
 
+static bool SA5_performant_intr_pending(struct ctlr_info *h)
+{
+	unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);
+
+	if (!register_value)
+		return false;
+
+	if (h->msi_vector || h->msix_vector)
+		return true;
+
+	/* Read outbound doorbell to flush */
+	register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
+	return register_value & SA5_OUTDB_STATUS_PERF_BIT;
+}
 
 static struct access_method SA5_access = {
 	SA5_submit_command,
@@ -250,14 +339,19 @@ static struct access_method SA5_access = {
 	SA5_completed,
 };
 
+static struct access_method SA5_performant_access = {
+	SA5_submit_command,
+	SA5_performant_intr_mask,
+	SA5_fifo_full,
+	SA5_performant_intr_pending,
+	SA5_performant_completed,
+};
+
 struct board_type {
 	u32	board_id;
 	char	*product_name;
 	struct access_method *access;
 };
 
-
-/* end of old hpsa_scsi.h file */
-
 #endif /* HPSA_H */
 
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index 88bb3b0a21d3..3e0abdf76689 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -101,6 +101,7 @@
 #define CFGTBL_AccCmds          0x00000001l
 
 #define CFGTBL_Trans_Simple     0x00000002l
+#define CFGTBL_Trans_Performant 0x00000004l
 
 #define CFGTBL_BusType_Ultra2   0x00000001l
 #define CFGTBL_BusType_Ultra3   0x00000002l
@@ -267,12 +268,31 @@ struct ErrorInfo {
 #define CMD_IOCTL_PEND  0x01
 #define CMD_SCSI	0x03
 
+/* This structure needs to be divisible by 32 for new
+ * indexing method and performant mode.
+ */
+#define PAD32 32
+#define PAD64DIFF 0
+#define USEEXTRA ((sizeof(void *) - 4)/4)
+#define PADSIZE (PAD32 + PAD64DIFF * USEEXTRA)
+
+#define DIRECT_LOOKUP_SHIFT 5
+#define DIRECT_LOOKUP_BIT 0x10
+
+#define HPSA_ERROR_BIT          0x02
 struct ctlr_info; /* defined in hpsa.h */
-/* The size of this structure needs to be divisible by 8
- * on all architectures, because the controller uses 2
- * lower bits of the address, and the driver uses 1 lower
- * bit (3 bits total.)
+/* The size of this structure needs to be divisible by 32
+ * on all architectures because low 5 bits of the addresses
+ * are used as follows:
+ *
+ * bit 0: to device, used to indicate "performant mode" command
+ *        from device, indidcates error status.
+ * bit 1-3: to device, indicates block fetch table entry for
+ *          reducing DMA in fetching commands from host memory.
+ * bit 4: used to indicate whether tag is "direct lookup" (index),
+ *        or a bus address.
  */
+
 struct CommandList {
 	struct CommandListHeader Header;
 	struct RequestBlock      Request;
@@ -291,6 +311,14 @@ struct CommandList {
 	struct completion *waiting;
 	int	 retry_count;
 	void   *scsi_cmd;
+
+/* on 64 bit architectures, to get this to be 32-byte-aligned
+ * it so happens we need no padding, on 32 bit systems,
+ * we need 8 bytes of padding.   This does that.
+ */
+#define COMMANDLIST_PAD ((8 - sizeof(long))/4 * 8)
+	u8 pad[COMMANDLIST_PAD];
+
 };
 
 /* Configuration Table Structure */
@@ -301,18 +329,38 @@ struct HostWrite {
 	u32 CoalIntCount;
 };
 
+#define SIMPLE_MODE     0x02
+#define PERFORMANT_MODE 0x04
+#define MEMQ_MODE       0x08
+
 struct CfgTable {
-	u8             Signature[4];
-	u32            SpecValence;
-	u32            TransportSupport;
-	u32            TransportActive;
-	struct HostWrite HostWrite;
-	u32            CmdsOutMax;
-	u32            BusTypes;
-	u32            Reserved;
-	u8             ServerName[16];
-	u32            HeartBeat;
-	u32            SCSI_Prefetch;
+	u8            Signature[4];
+	u32		SpecValence;
+	u32           TransportSupport;
+	u32           TransportActive;
+	struct 		HostWrite HostWrite;
+	u32           CmdsOutMax;
+	u32           BusTypes;
+	u32           TransMethodOffset;
+	u8            ServerName[16];
+	u32           HeartBeat;
+	u32           SCSI_Prefetch;
+	u32	 	MaxScatterGatherElements;
+	u32		MaxLogicalUnits;
+	u32		MaxPhysicalDevices;
+	u32		MaxPhysicalDrivesPerLogicalUnit;
+	u32		MaxPerformantModeCommands;
+};
+
+#define NUM_BLOCKFETCH_ENTRIES 8
+struct TransTable_struct {
+	u32            BlockFetch[NUM_BLOCKFETCH_ENTRIES];
+	u32            RepQSize;
+	u32            RepQCount;
+	u32            RepQCtrAddrLow32;
+	u32            RepQCtrAddrHigh32;
+	u32            RepQAddr0Low32;
+	u32            RepQAddr0High32;
 };
 
 struct hpsa_pci_info {