Merge tag 'v4.20-rc6' into for-4.21/block

Pull in v4.20-rc6 to resolve the conflict in NVMe, but also to get the
two corruption fixes. We're going to be overhauling the direct dispatch
path, and we need to do that on top of the changes we made for that
in mainline.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

5 files changed, 39 insertions, 37 deletions

diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 93c66ebad907..f78d2e5c1471 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -2416,8 +2416,8 @@ int iscsi_eh_session_reset(struct scsi_cmnd *sc)
 failed:
 		ISCSI_DBG_EH(session,
 			     "failing session reset: Could not log back into "
-			     "%s, %s [age %d]\n", session->targetname,
-			     conn->persistent_address, session->age);
+			     "%s [age %d]\n", session->targetname,
+			     session->age);
 		spin_unlock_bh(&session->frwd_lock);
 		mutex_unlock(&session->eh_mutex);
 		return FAILED;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 20fa6785a0e2..68d62d55a3a5 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -167,7 +167,11 @@ lpfc_config_port_prep(struct lpfc_hba *phba)
 		       sizeof(phba->wwpn));
 	}
 
-	phba->sli3_options = 0x0;
+	/*
+	 * Clear all option bits except LPFC_SLI3_BG_ENABLED,
+	 * which was already set in lpfc_get_cfgparam()
+	 */
+	phba->sli3_options &= (uint32_t)LPFC_SLI3_BG_ENABLED;
 
 	/* Setup and issue mailbox READ REV command */
 	lpfc_read_rev(phba, pmb);
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 783a1540cfbe..b9e5cd79931a 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -4965,7 +4965,6 @@ lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode)
 		phba->sli3_options &= ~(LPFC_SLI3_NPIV_ENABLED |
 					LPFC_SLI3_HBQ_ENABLED |
 					LPFC_SLI3_CRP_ENABLED |
-					LPFC_SLI3_BG_ENABLED |
 					LPFC_SLI3_DSS_ENABLED);
 		if (rc != MBX_SUCCESS) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index f03dc03a42c3..8f88348ebe42 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -446,7 +446,6 @@ struct storvsc_device {
 
 	bool	 destroy;
 	bool	 drain_notify;
-	bool	 open_sub_channel;
 	atomic_t num_outstanding_req;
 	struct Scsi_Host *host;
 
@@ -636,33 +635,38 @@ get_in_err:
 static void handle_sc_creation(struct vmbus_channel *new_sc)
 {
 	struct hv_device *device = new_sc->primary_channel->device_obj;
+	struct device *dev = &device->device;
 	struct storvsc_device *stor_device;
 	struct vmstorage_channel_properties props;
+	int ret;
 
 	stor_device = get_out_stor_device(device);
 	if (!stor_device)
 		return;
 
-	if (stor_device->open_sub_channel == false)
-		return;
-
 	memset(&props, 0, sizeof(struct vmstorage_channel_properties));
 
-	vmbus_open(new_sc,
-		   storvsc_ringbuffer_size,
-		   storvsc_ringbuffer_size,
-		   (void *)&props,
-		   sizeof(struct vmstorage_channel_properties),
-		   storvsc_on_channel_callback, new_sc);
+	ret = vmbus_open(new_sc,
+			 storvsc_ringbuffer_size,
+			 storvsc_ringbuffer_size,
+			 (void *)&props,
+			 sizeof(struct vmstorage_channel_properties),
+			 storvsc_on_channel_callback, new_sc);
 
-	if (new_sc->state == CHANNEL_OPENED_STATE) {
-		stor_device->stor_chns[new_sc->target_cpu] = new_sc;
-		cpumask_set_cpu(new_sc->target_cpu, &stor_device->alloced_cpus);
+	/* In case vmbus_open() fails, we don't use the sub-channel. */
+	if (ret != 0) {
+		dev_err(dev, "Failed to open sub-channel: err=%d\n", ret);
+		return;
 	}
+
+	/* Add the sub-channel to the array of available channels. */
+	stor_device->stor_chns[new_sc->target_cpu] = new_sc;
+	cpumask_set_cpu(new_sc->target_cpu, &stor_device->alloced_cpus);
 }
 
 static void  handle_multichannel_storage(struct hv_device *device, int max_chns)
 {
+	struct device *dev = &device->device;
 	struct storvsc_device *stor_device;
 	int num_cpus = num_online_cpus();
 	int num_sc;
@@ -679,22 +683,12 @@ static void  handle_multichannel_storage(struct hv_device *device, int max_chns)
 	request = &stor_device->init_request;
 	vstor_packet = &request->vstor_packet;
 
-	stor_device->open_sub_channel = true;
 	/*
 	 * Establish a handler for dealing with subchannels.
 	 */
 	vmbus_set_sc_create_callback(device->channel, handle_sc_creation);
 
 	/*
-	 * Check to see if sub-channels have already been created. This
-	 * can happen when this driver is re-loaded after unloading.
-	 */
-
-	if (vmbus_are_subchannels_present(device->channel))
-		return;
-
-	stor_device->open_sub_channel = false;
-	/*
 	 * Request the host to create sub-channels.
 	 */
 	memset(request, 0, sizeof(struct storvsc_cmd_request));
@@ -710,23 +704,29 @@ static void  handle_multichannel_storage(struct hv_device *device, int max_chns)
 			       VM_PKT_DATA_INBAND,
 			       VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
 
-	if (ret != 0)
+	if (ret != 0) {
+		dev_err(dev, "Failed to create sub-channel: err=%d\n", ret);
 		return;
+	}
 
 	t = wait_for_completion_timeout(&request->wait_event, 10*HZ);
-	if (t == 0)
+	if (t == 0) {
+		dev_err(dev, "Failed to create sub-channel: timed out\n");
 		return;
+	}
 
 	if (vstor_packet->operation != VSTOR_OPERATION_COMPLETE_IO ||
-	    vstor_packet->status != 0)
+	    vstor_packet->status != 0) {
+		dev_err(dev, "Failed to create sub-channel: op=%d, sts=%d\n",
+			vstor_packet->operation, vstor_packet->status);
 		return;
+	}
 
 	/*
-	 * Now that we created the sub-channels, invoke the check; this
-	 * may trigger the callback.
+	 * We need to do nothing here, because vmbus_process_offer()
+	 * invokes channel->sc_creation_callback, which will open and use
+	 * the sub-channel(s).
 	 */
-	stor_device->open_sub_channel = true;
-	vmbus_are_subchannels_present(device->channel);
 }
 
 static void cache_wwn(struct storvsc_device *stor_device,
@@ -1794,7 +1794,6 @@ static int storvsc_probe(struct hv_device *device,
 	}
 
 	stor_device->destroy = false;
-	stor_device->open_sub_channel = false;
 	init_waitqueue_head(&stor_device->waiting_to_drain);
 	stor_device->device = device;
 	stor_device->host = host;
diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c
index 6e491023fdd8..0d6b2a88fc8e 100644
--- a/drivers/scsi/vmw_pvscsi.c
+++ b/drivers/scsi/vmw_pvscsi.c
@@ -1202,8 +1202,6 @@ static void pvscsi_shutdown_intr(struct pvscsi_adapter *adapter)
 
 static void pvscsi_release_resources(struct pvscsi_adapter *adapter)
 {
-	pvscsi_shutdown_intr(adapter);
-
 	if (adapter->workqueue)
 		destroy_workqueue(adapter->workqueue);
 
@@ -1534,6 +1532,7 @@ static int pvscsi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 out_reset_adapter:
 	ll_adapter_reset(adapter);
 out_release_resources:
+	pvscsi_shutdown_intr(adapter);
 	pvscsi_release_resources(adapter);
 	scsi_host_put(host);
 out_disable_device:
@@ -1542,6 +1541,7 @@ out_disable_device:
 	return error;
 
 out_release_resources_and_disable:
+	pvscsi_shutdown_intr(adapter);
 	pvscsi_release_resources(adapter);
 	goto out_disable_device;
 }