Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable

12 files changed, 19 insertions, 49 deletions

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index b2fb2b2a6e70..a6dea08664fc 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -90,11 +90,7 @@ static const struct pci_device_id hpsa_pci_device_id[] = {
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3252},
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3253},
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3254},
-#define PCI_DEVICE_ID_HP_CISSF 0x333f
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x333F},
-	{PCI_VENDOR_ID_HP,     PCI_ANY_ID,             PCI_ANY_ID, PCI_ANY_ID,
-		PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
-	{PCI_VENDOR_ID_COMPAQ,     PCI_ANY_ID,             PCI_ANY_ID, PCI_ANY_ID,
+	{PCI_VENDOR_ID_HP,     PCI_ANY_ID,	PCI_ANY_ID, PCI_ANY_ID,
 		PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
 	{0,}
 };
@@ -113,8 +109,6 @@ static struct board_type products[] = {
 	{0x3249103C, "Smart Array P812", &SA5_access},
 	{0x324a103C, "Smart Array P712m", &SA5_access},
 	{0x324b103C, "Smart Array P711m", &SA5_access},
-	{0x3233103C, "StorageWorks P1210m", &SA5_access},
-	{0x333F103C, "StorageWorks P1210m", &SA5_access},
 	{0x3250103C, "Smart Array", &SA5_access},
 	{0x3250113C, "Smart Array", &SA5_access},
 	{0x3250123C, "Smart Array", &SA5_access},
diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index 0433ea6f27c9..b37c8a3c1bb0 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -951,8 +951,8 @@ static int _osd_req_finalize_cdb_cont(struct osd_request *or, const u8 *cap_key)
 	/* create a bio for continuation segment */
 	bio = bio_map_kern(req_q, or->cdb_cont.buff, or->cdb_cont.total_bytes,
 			   GFP_KERNEL);
-	if (unlikely(!bio))
-		return -ENOMEM;
+	if (IS_ERR(bio))
+		return PTR_ERR(bio);
 
 	bio->bi_rw |= REQ_WRITE;
 
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index 5e76a624cb08..300d59f389da 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -62,6 +62,7 @@
 static unsigned int pmcraid_debug_log;
 static unsigned int pmcraid_disable_aen;
 static unsigned int pmcraid_log_level = IOASC_LOG_LEVEL_MUST;
+static unsigned int pmcraid_enable_msix;
 
 /*
  * Data structures to support multiple adapters by the LLD.
@@ -4691,7 +4692,8 @@ pmcraid_register_interrupt_handler(struct pmcraid_instance *pinstance)
 	int rc;
 	struct pci_dev *pdev = pinstance->pdev;
 
-	if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) {
+	if ((pmcraid_enable_msix) &&
+		(pci_find_capability(pdev, PCI_CAP_ID_MSIX))) {
 		int num_hrrq = PMCRAID_NUM_MSIX_VECTORS;
 		struct msix_entry entries[PMCRAID_NUM_MSIX_VECTORS];
 		int i;
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index 1134279604e8..4db210d93947 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -42,7 +42,7 @@
  */
 #define PMCRAID_DRIVER_NAME		"PMC MaxRAID"
 #define PMCRAID_DEVFILE			"pmcsas"
-#define PMCRAID_DRIVER_VERSION		"2.0.3"
+#define PMCRAID_DRIVER_VERSION		"1.0.3"
 #define PMCRAID_DRIVER_DATE		__DATE__
 
 #define PMCRAID_FW_VERSION_1		0x002
@@ -333,11 +333,9 @@ struct pmcraid_config_table_entry {
 	__u8  lun[PMCRAID_LUN_LEN];
 } __attribute__((packed, aligned(4)));
 
-/* extended configuration table sizes are of 64 bytes in size */
-#define PMCRAID_CFGTE_EXT_SIZE	32
+/* extended configuration table sizes are also of 32 bytes in size */
 struct pmcraid_config_table_entry_ext {
 	struct pmcraid_config_table_entry cfgte;
-	__u8  cfgte_ext[PMCRAID_CFGTE_EXT_SIZE];
 };
 
 /* resource types (config_table_entry.resource_type values) */
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 3a22effced5f..9ce539d4557e 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2409,7 +2409,6 @@ struct qla_hw_data {
 		uint32_t	enable_target_reset	:1;
 		uint32_t	enable_lip_full_login	:1;
 		uint32_t	enable_led_scheme	:1;
-		uint32_t	inta_enabled		:1;
 		uint32_t	msi_enabled		:1;
 		uint32_t	msix_enabled		:1;
 		uint32_t	disable_serdes		:1;
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 5f94430b42f0..4c1ba6263eb3 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -1061,6 +1061,7 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
 		fcp_cmnd->additional_cdb_len |= 2;
 
 	int_to_scsilun(sp->cmd->device->lun, &fcp_cmnd->lun);
+	host_to_fcp_swap((uint8_t *)&fcp_cmnd->lun, sizeof(fcp_cmnd->lun));
 	memcpy(fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len);
 	cmd_pkt->fcp_cmnd_dseg_len = cpu_to_le16(fcp_cmnd_len);
 	cmd_pkt->fcp_cmnd_dseg_address[0] = cpu_to_le32(
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 1f06ddd9bdd1..7f77898486a9 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -2491,14 +2491,15 @@ skip_msix:
 skip_msi:
 
 	ret = request_irq(ha->pdev->irq, ha->isp_ops->intr_handler,
-	    IRQF_SHARED, QLA2XXX_DRIVER_NAME, rsp);
+	    ha->flags.msi_enabled ? 0 : IRQF_SHARED,
+	    QLA2XXX_DRIVER_NAME, rsp);
 	if (ret) {
 		qla_printk(KERN_WARNING, ha,
 		    "Failed to reserve interrupt %d already in use.\n",
 		    ha->pdev->irq);
 		goto fail;
 	}
-	ha->flags.inta_enabled = 1;
+
 clear_risc_ints:
 
 	/*
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 8d9edfb39803..ae2acacc0003 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -2749,6 +2749,7 @@ sufficient_dsds:
 			goto queuing_error_fcp_cmnd;
 
 		int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun);
+		host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun));
 
 		/* build FCP_CMND IU */
 		memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd));
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 1644eabaafeb..2c0876c81a3f 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -829,7 +829,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 {
 	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
 	srb_t *sp;
-	int ret;
+	int ret = SUCCESS;
 	unsigned int id, lun;
 	unsigned long flags;
 	int wait = 0;
@@ -2064,6 +2064,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		ha->init_cb_size = sizeof(struct mid_init_cb_81xx);
 		ha->gid_list_info_size = 8;
 		ha->optrom_size = OPTROM_SIZE_82XX;
+		ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX;
 		ha->isp_ops = &qla82xx_isp_ops;
 		ha->flash_conf_off = FARX_ACCESS_FLASH_CONF;
 		ha->flash_data_off = FARX_ACCESS_FLASH_DATA;
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 8edbccb3232d..cf0075a2d0c2 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,9 +7,9 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.04-k0"
+#define QLA2XXX_VERSION      "8.03.05-k0"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	3
-#define QLA_DRIVER_PATCH_VER	4
+#define QLA_DRIVER_PATCH_VER	5
 #define QLA_DRIVER_BETA_VER	0
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 824b8fc03ce5..30ac116186f5 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -615,7 +615,7 @@ static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd)
 	return rtn;
 }
 
-static int __scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
+static int scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
 {
 	if (!scmd->device->host->hostt->eh_abort_handler)
 		return FAILED;
@@ -623,31 +623,9 @@ static int __scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
 	return scmd->device->host->hostt->eh_abort_handler(scmd);
 }
 
-/**
- * scsi_try_to_abort_cmd - Ask host to abort a running command.
- * @scmd:	SCSI cmd to abort from Lower Level.
- *
- * Notes:
- *    This function will not return until the user's completion function
- *    has been called.  there is no timeout on this operation.  if the
- *    author of the low-level driver wishes this operation to be timed,
- *    they can provide this facility themselves.  helper functions in
- *    scsi_error.c can be supplied to make this easier to do.
- */
-static int scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
-{
-	/*
-	 * scsi_done was called just after the command timed out and before
-	 * we had a chance to process it. (db)
-	 */
-	if (scmd->serial_number == 0)
-		return SUCCESS;
-	return __scsi_try_to_abort_cmd(scmd);
-}
-
 static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd)
 {
-	if (__scsi_try_to_abort_cmd(scmd) != SUCCESS)
+	if (scsi_try_to_abort_cmd(scmd) != SUCCESS)
 		if (scsi_try_bus_device_reset(scmd) != SUCCESS)
 			if (scsi_try_target_reset(scmd) != SUCCESS)
 				if (scsi_try_bus_reset(scmd) != SUCCESS)
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index eafeeda6e194..5b6bbaea59fe 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1403,11 +1403,6 @@ static void scsi_softirq_done(struct request *rq)
 
 	INIT_LIST_HEAD(&cmd->eh_entry);
 
-	/*
-	 * Set the serial numbers back to zero
-	 */
-	cmd->serial_number = 0;
-
 	atomic_inc(&cmd->device->iodone_cnt);
 	if (cmd->result)
 		atomic_inc(&cmd->device->ioerr_cnt);