tty: move drivers/serial/ to drivers/tty/serial/

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 188 deletions

diff --git a/drivers/serial/68328serial.h b/drivers/serial/68328serial.h
deleted file mode 100644
index 664ceb0a158c..000000000000
--- a/drivers/serial/68328serial.h
+++ /dev/null
@@ -1,188 +0,0 @@
-/* 68328serial.h: Definitions for the mc68328 serial driver.
- *
- * Copyright (C) 1995       David S. Miller    <davem@caip.rutgers.edu>
- * Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
- * Copyright (C) 1998, 1999 D. Jeff Dionne     <jeff@uclinux.org>
- * Copyright (C) 1999       Vladimir Gurevich  <vgurevic@cisco.com>
- *
- * VZ Support/Fixes             Evan Stawnyczy <e@lineo.ca>
- */
-
-#ifndef _MC683XX_SERIAL_H
-#define _MC683XX_SERIAL_H
-
-
-struct serial_struct {
-	int	type;
-	int	line;
-	int	port;
-	int	irq;
-	int	flags;
-	int	xmit_fifo_size;
-	int	custom_divisor;
-	int	baud_base;
-	unsigned short	close_delay;
-	char	reserved_char[2];
-	int	hub6;  /* FIXME: We don't have AT&T Hub6 boards! */
-	unsigned short	closing_wait; /* time to wait before closing */
-	unsigned short	closing_wait2; /* no longer used... */
-	int	reserved[4];
-};
-
-/*
- * For the close wait times, 0 means wait forever for serial port to
- * flush its output.  65535 means don't wait at all.
- */
-#define S_CLOSING_WAIT_INF	0
-#define S_CLOSING_WAIT_NONE	65535
-
-/*
- * Definitions for S_struct (and serial_struct) flags field
- */
-#define S_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes 
-				   on the callout port */
-#define S_FOURPORT  0x0002	/* Set OU1, OUT2 per AST Fourport settings */
-#define S_SAK	0x0004	/* Secure Attention Key (Orange book) */
-#define S_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */
-
-#define S_SPD_MASK	0x0030
-#define S_SPD_HI	0x0010	/* Use 56000 instead of 38400 bps */
-
-#define S_SPD_VHI	0x0020  /* Use 115200 instead of 38400 bps */
-#define S_SPD_CUST	0x0030  /* Use user-specified divisor */
-
-#define S_SKIP_TEST	0x0040 /* Skip UART test during autoconfiguration */
-#define S_AUTO_IRQ  0x0080 /* Do automatic IRQ during autoconfiguration */
-#define S_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */
-#define S_PGRP_LOCKOUT    0x0200 /* Lock out cua opens based on pgrp */
-#define S_CALLOUT_NOHUP   0x0400 /* Don't do hangups for cua device */
-
-#define S_FLAGS	0x0FFF	/* Possible legal S flags */
-#define S_USR_MASK 0x0430	/* Legal flags that non-privileged
-				 * users can set or reset */
-
-/* Internal flags used only by kernel/chr_drv/serial.c */
-#define S_INITIALIZED	0x80000000 /* Serial port was initialized */
-#define S_CALLOUT_ACTIVE	0x40000000 /* Call out device is active */
-#define S_NORMAL_ACTIVE	0x20000000 /* Normal device is active */
-#define S_BOOT_AUTOCONF	0x10000000 /* Autoconfigure port on bootup */
-#define S_CLOSING		0x08000000 /* Serial port is closing */
-#define S_CTS_FLOW		0x04000000 /* Do CTS flow control */
-#define S_CHECK_CD		0x02000000 /* i.e., CLOCAL */
-
-/* Software state per channel */
-
-#ifdef __KERNEL__
-
-/*
- * I believe this is the optimal setting that reduces the number of interrupts.
- * At high speeds the output might become a little "bursted" (use USTCNT_TXHE
- * if that bothers you), but in most cases it will not, since we try to 
- * transmit characters every time rs_interrupt is called. Thus, quite often
- * you'll see that a receive interrupt occures before the transmit one.
- *                                  -- Vladimir Gurevich
- */
-#define USTCNT_TX_INTR_MASK (USTCNT_TXEE)
-
-/*
- * 68328 and 68EZ328 UARTS are a little bit different. EZ328 has special
- * "Old data interrupt" which occures whenever the data stay in the FIFO
- * longer than 30 bits time. This allows us to use FIFO without compromising
- * latency. '328 does not have this feature and without the real  328-based
- * board I would assume that RXRE is the safest setting.
- *
- * For EZ328 I use RXHE (Half empty) interrupt to reduce the number of
- * interrupts. RXFE (receive queue full) causes the system to lose data
- * at least at 115200 baud
- *
- * If your board is busy doing other stuff, you might consider to use
- * RXRE (data ready intrrupt) instead.
- *
- * The other option is to make these INTR masks run-time configurable, so
- * that people can dynamically adapt them according to the current usage.
- *                                  -- Vladimir Gurevich
- */
-
-/* (es) */
-#if defined(CONFIG_M68EZ328) || defined(CONFIG_M68VZ328)
-#define USTCNT_RX_INTR_MASK (USTCNT_RXHE | USTCNT_ODEN)
-#elif defined(CONFIG_M68328)
-#define USTCNT_RX_INTR_MASK (USTCNT_RXRE)
-#else
-#error Please, define the Rx interrupt events for your CPU
-#endif
-/* (/es) */
-
-/*
- * This is our internal structure for each serial port's state.
- * 
- * Many fields are paralleled by the structure used by the serial_struct
- * structure.
- *
- * For definitions of the flags field, see tty.h
- */
-
-struct m68k_serial {
-	char soft_carrier;  /* Use soft carrier on this channel */
-	char break_abort;   /* Is serial console in, so process brk/abrt */
-	char is_cons;       /* Is this our console. */
-
-	/* We need to know the current clock divisor
-	 * to read the bps rate the chip has currently
-	 * loaded.
-	 */
-	unsigned char clk_divisor;  /* May be 1, 16, 32, or 64 */
-	int baud;
-	int			magic;
-	int			baud_base;
-	int			port;
-	int			irq;
-	int			flags; 		/* defined in tty.h */
-	int			type; 		/* UART type */
-	struct tty_struct 	*tty;
-	int			read_status_mask;
-	int			ignore_status_mask;
-	int			timeout;
-	int			xmit_fifo_size;
-	int			custom_divisor;
-	int			x_char;	/* xon/xoff character */
-	int			close_delay;
-	unsigned short		closing_wait;
-	unsigned short		closing_wait2;
-	unsigned long		event;
-	unsigned long		last_active;
-	int			line;
-	int			count;	    /* # of fd on device */
-	int			blocked_open; /* # of blocked opens */
-	unsigned char 		*xmit_buf;
-	int			xmit_head;
-	int			xmit_tail;
-	int			xmit_cnt;
-	struct work_struct	tqueue;
-	struct work_struct	tqueue_hangup;
-	wait_queue_head_t	open_wait;
-	wait_queue_head_t	close_wait;
-};
-
-
-#define SERIAL_MAGIC 0x5301
-
-/*
- * The size of the serial xmit buffer is 1 page, or 4096 bytes
- */
-#define SERIAL_XMIT_SIZE 4096
-
-/*
- * Events are used to schedule things to happen at timer-interrupt
- * time, instead of at rs interrupt time.
- */
-#define RS_EVENT_WRITE_WAKEUP	0
-
-/* 
- * Define the number of ports supported and their irqs.
- */
-#define NR_PORTS 1
-#define UART_IRQ_DEFNS {UART_IRQ_NUM}
-
-#endif /* __KERNEL__ */
-#endif /* !(_MC683XX_SERIAL_H) */