tty: move drivers/serial/ to drivers/tty/serial/

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 2159 deletions

diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
deleted file mode 100644
index 6a9c6605666a..000000000000
--- a/drivers/serial/mpsc.c
+++ /dev/null
@@ -1,2159 +0,0 @@
-/*
- * Generic driver for the MPSC (UART mode) on Marvell parts (e.g., GT64240,
- * GT64260, MV64340, MV64360, GT96100, ... ).
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * Based on an old MPSC driver that was in the linuxppc tree.  It appears to
- * have been created by Chris Zankel (formerly of MontaVista) but there
- * is no proper Copyright so I'm not sure.  Apparently, parts were also
- * taken from PPCBoot (now U-Boot).  Also based on drivers/serial/8250.c
- * by Russell King.
- *
- * 2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-/*
- * The MPSC interface is much like a typical network controller's interface.
- * That is, you set up separate rings of descriptors for transmitting and
- * receiving data.  There is also a pool of buffers with (one buffer per
- * descriptor) that incoming data are dma'd into or outgoing data are dma'd
- * out of.
- *
- * The MPSC requires two other controllers to be able to work.  The Baud Rate
- * Generator (BRG) provides a clock at programmable frequencies which determines
- * the baud rate.  The Serial DMA Controller (SDMA) takes incoming data from the
- * MPSC and DMA's it into memory or DMA's outgoing data and passes it to the
- * MPSC.  It is actually the SDMA interrupt that the driver uses to keep the
- * transmit and receive "engines" going (i.e., indicate data has been
- * transmitted or received).
- *
- * NOTES:
- *
- * 1) Some chips have an erratum where several regs cannot be
- * read.  To work around that, we keep a local copy of those regs in
- * 'mpsc_port_info'.
- *
- * 2) Some chips have an erratum where the ctlr will hang when the SDMA ctlr
- * accesses system mem with coherency enabled.  For that reason, the driver
- * assumes that coherency for that ctlr has been disabled.  This means
- * that when in a cache coherent system, the driver has to manually manage
- * the data cache on the areas that it touches because the dma_* macro are
- * basically no-ops.
- *
- * 3) There is an erratum (on PPC) where you can't use the instruction to do
- * a DMA_TO_DEVICE/cache clean so DMA_BIDIRECTIONAL/flushes are used in places
- * where a DMA_TO_DEVICE/clean would have [otherwise] sufficed.
- *
- * 4) AFAICT, hardware flow control isn't supported by the controller --MAG.
- */
-
-
-#if defined(CONFIG_SERIAL_MPSC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/mv643xx.h>
-#include <linux/platform_device.h>
-#include <linux/gfp.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#define	MPSC_NUM_CTLRS		2
-
-/*
- * Descriptors and buffers must be cache line aligned.
- * Buffers lengths must be multiple of cache line size.
- * Number of Tx & Rx descriptors must be powers of 2.
- */
-#define	MPSC_RXR_ENTRIES	32
-#define	MPSC_RXRE_SIZE		dma_get_cache_alignment()
-#define	MPSC_RXR_SIZE		(MPSC_RXR_ENTRIES * MPSC_RXRE_SIZE)
-#define	MPSC_RXBE_SIZE		dma_get_cache_alignment()
-#define	MPSC_RXB_SIZE		(MPSC_RXR_ENTRIES * MPSC_RXBE_SIZE)
-
-#define	MPSC_TXR_ENTRIES	32
-#define	MPSC_TXRE_SIZE		dma_get_cache_alignment()
-#define	MPSC_TXR_SIZE		(MPSC_TXR_ENTRIES * MPSC_TXRE_SIZE)
-#define	MPSC_TXBE_SIZE		dma_get_cache_alignment()
-#define	MPSC_TXB_SIZE		(MPSC_TXR_ENTRIES * MPSC_TXBE_SIZE)
-
-#define	MPSC_DMA_ALLOC_SIZE	(MPSC_RXR_SIZE + MPSC_RXB_SIZE + MPSC_TXR_SIZE \
-		+ MPSC_TXB_SIZE + dma_get_cache_alignment() /* for alignment */)
-
-/* Rx and Tx Ring entry descriptors -- assume entry size is <= cacheline size */
-struct mpsc_rx_desc {
-	u16 bufsize;
-	u16 bytecnt;
-	u32 cmdstat;
-	u32 link;
-	u32 buf_ptr;
-} __attribute((packed));
-
-struct mpsc_tx_desc {
-	u16 bytecnt;
-	u16 shadow;
-	u32 cmdstat;
-	u32 link;
-	u32 buf_ptr;
-} __attribute((packed));
-
-/*
- * Some regs that have the erratum that you can't read them are are shared
- * between the two MPSC controllers.  This struct contains those shared regs.
- */
-struct mpsc_shared_regs {
-	phys_addr_t mpsc_routing_base_p;
-	phys_addr_t sdma_intr_base_p;
-
-	void __iomem *mpsc_routing_base;
-	void __iomem *sdma_intr_base;
-
-	u32 MPSC_MRR_m;
-	u32 MPSC_RCRR_m;
-	u32 MPSC_TCRR_m;
-	u32 SDMA_INTR_CAUSE_m;
-	u32 SDMA_INTR_MASK_m;
-};
-
-/* The main driver data structure */
-struct mpsc_port_info {
-	struct uart_port port;	/* Overlay uart_port structure */
-
-	/* Internal driver state for this ctlr */
-	u8 ready;
-	u8 rcv_data;
-	tcflag_t c_iflag;	/* save termios->c_iflag */
-	tcflag_t c_cflag;	/* save termios->c_cflag */
-
-	/* Info passed in from platform */
-	u8 mirror_regs;		/* Need to mirror regs? */
-	u8 cache_mgmt;		/* Need manual cache mgmt? */
-	u8 brg_can_tune;	/* BRG has baud tuning? */
-	u32 brg_clk_src;
-	u16 mpsc_max_idle;
-	int default_baud;
-	int default_bits;
-	int default_parity;
-	int default_flow;
-
-	/* Physical addresses of various blocks of registers (from platform) */
-	phys_addr_t mpsc_base_p;
-	phys_addr_t sdma_base_p;
-	phys_addr_t brg_base_p;
-
-	/* Virtual addresses of various blocks of registers (from platform) */
-	void __iomem *mpsc_base;
-	void __iomem *sdma_base;
-	void __iomem *brg_base;
-
-	/* Descriptor ring and buffer allocations */
-	void *dma_region;
-	dma_addr_t dma_region_p;
-
-	dma_addr_t rxr;		/* Rx descriptor ring */
-	dma_addr_t rxr_p;	/* Phys addr of rxr */
-	u8 *rxb;		/* Rx Ring I/O buf */
-	u8 *rxb_p;		/* Phys addr of rxb */
-	u32 rxr_posn;		/* First desc w/ Rx data */
-
-	dma_addr_t txr;		/* Tx descriptor ring */
-	dma_addr_t txr_p;	/* Phys addr of txr */
-	u8 *txb;		/* Tx Ring I/O buf */
-	u8 *txb_p;		/* Phys addr of txb */
-	int txr_head;		/* Where new data goes */
-	int txr_tail;		/* Where sent data comes off */
-	spinlock_t tx_lock;	/* transmit lock */
-
-	/* Mirrored values of regs we can't read (if 'mirror_regs' set) */
-	u32 MPSC_MPCR_m;
-	u32 MPSC_CHR_1_m;
-	u32 MPSC_CHR_2_m;
-	u32 MPSC_CHR_10_m;
-	u32 BRG_BCR_m;
-	struct mpsc_shared_regs *shared_regs;
-};
-
-/* Hooks to platform-specific code */
-int mpsc_platform_register_driver(void);
-void mpsc_platform_unregister_driver(void);
-
-/* Hooks back in to mpsc common to be called by platform-specific code */
-struct mpsc_port_info *mpsc_device_probe(int index);
-struct mpsc_port_info *mpsc_device_remove(int index);
-
-/* Main MPSC Configuration Register Offsets */
-#define	MPSC_MMCRL			0x0000
-#define	MPSC_MMCRH			0x0004
-#define	MPSC_MPCR			0x0008
-#define	MPSC_CHR_1			0x000c
-#define	MPSC_CHR_2			0x0010
-#define	MPSC_CHR_3			0x0014
-#define	MPSC_CHR_4			0x0018
-#define	MPSC_CHR_5			0x001c
-#define	MPSC_CHR_6			0x0020
-#define	MPSC_CHR_7			0x0024
-#define	MPSC_CHR_8			0x0028
-#define	MPSC_CHR_9			0x002c
-#define	MPSC_CHR_10			0x0030
-#define	MPSC_CHR_11			0x0034
-
-#define	MPSC_MPCR_FRZ			(1 << 9)
-#define	MPSC_MPCR_CL_5			0
-#define	MPSC_MPCR_CL_6			1
-#define	MPSC_MPCR_CL_7			2
-#define	MPSC_MPCR_CL_8			3
-#define	MPSC_MPCR_SBL_1			0
-#define	MPSC_MPCR_SBL_2			1
-
-#define	MPSC_CHR_2_TEV			(1<<1)
-#define	MPSC_CHR_2_TA			(1<<7)
-#define	MPSC_CHR_2_TTCS			(1<<9)
-#define	MPSC_CHR_2_REV			(1<<17)
-#define	MPSC_CHR_2_RA			(1<<23)
-#define	MPSC_CHR_2_CRD			(1<<25)
-#define	MPSC_CHR_2_EH			(1<<31)
-#define	MPSC_CHR_2_PAR_ODD		0
-#define	MPSC_CHR_2_PAR_SPACE		1
-#define	MPSC_CHR_2_PAR_EVEN		2
-#define	MPSC_CHR_2_PAR_MARK		3
-
-/* MPSC Signal Routing */
-#define	MPSC_MRR			0x0000
-#define	MPSC_RCRR			0x0004
-#define	MPSC_TCRR			0x0008
-
-/* Serial DMA Controller Interface Registers */
-#define	SDMA_SDC			0x0000
-#define	SDMA_SDCM			0x0008
-#define	SDMA_RX_DESC			0x0800
-#define	SDMA_RX_BUF_PTR			0x0808
-#define	SDMA_SCRDP			0x0810
-#define	SDMA_TX_DESC			0x0c00
-#define	SDMA_SCTDP			0x0c10
-#define	SDMA_SFTDP			0x0c14
-
-#define	SDMA_DESC_CMDSTAT_PE		(1<<0)
-#define	SDMA_DESC_CMDSTAT_CDL		(1<<1)
-#define	SDMA_DESC_CMDSTAT_FR		(1<<3)
-#define	SDMA_DESC_CMDSTAT_OR		(1<<6)
-#define	SDMA_DESC_CMDSTAT_BR		(1<<9)
-#define	SDMA_DESC_CMDSTAT_MI		(1<<10)
-#define	SDMA_DESC_CMDSTAT_A		(1<<11)
-#define	SDMA_DESC_CMDSTAT_AM		(1<<12)
-#define	SDMA_DESC_CMDSTAT_CT		(1<<13)
-#define	SDMA_DESC_CMDSTAT_C		(1<<14)
-#define	SDMA_DESC_CMDSTAT_ES		(1<<15)
-#define	SDMA_DESC_CMDSTAT_L		(1<<16)
-#define	SDMA_DESC_CMDSTAT_F		(1<<17)
-#define	SDMA_DESC_CMDSTAT_P		(1<<18)
-#define	SDMA_DESC_CMDSTAT_EI		(1<<23)
-#define	SDMA_DESC_CMDSTAT_O		(1<<31)
-
-#define SDMA_DESC_DFLT			(SDMA_DESC_CMDSTAT_O \
-		| SDMA_DESC_CMDSTAT_EI)
-
-#define	SDMA_SDC_RFT			(1<<0)
-#define	SDMA_SDC_SFM			(1<<1)
-#define	SDMA_SDC_BLMR			(1<<6)
-#define	SDMA_SDC_BLMT			(1<<7)
-#define	SDMA_SDC_POVR			(1<<8)
-#define	SDMA_SDC_RIFB			(1<<9)
-
-#define	SDMA_SDCM_ERD			(1<<7)
-#define	SDMA_SDCM_AR			(1<<15)
-#define	SDMA_SDCM_STD			(1<<16)
-#define	SDMA_SDCM_TXD			(1<<23)
-#define	SDMA_SDCM_AT			(1<<31)
-
-#define	SDMA_0_CAUSE_RXBUF		(1<<0)
-#define	SDMA_0_CAUSE_RXERR		(1<<1)
-#define	SDMA_0_CAUSE_TXBUF		(1<<2)
-#define	SDMA_0_CAUSE_TXEND		(1<<3)
-#define	SDMA_1_CAUSE_RXBUF		(1<<8)
-#define	SDMA_1_CAUSE_RXERR		(1<<9)
-#define	SDMA_1_CAUSE_TXBUF		(1<<10)
-#define	SDMA_1_CAUSE_TXEND		(1<<11)
-
-#define	SDMA_CAUSE_RX_MASK	(SDMA_0_CAUSE_RXBUF | SDMA_0_CAUSE_RXERR \
-		| SDMA_1_CAUSE_RXBUF | SDMA_1_CAUSE_RXERR)
-#define	SDMA_CAUSE_TX_MASK	(SDMA_0_CAUSE_TXBUF | SDMA_0_CAUSE_TXEND \
-		| SDMA_1_CAUSE_TXBUF | SDMA_1_CAUSE_TXEND)
-
-/* SDMA Interrupt registers */
-#define	SDMA_INTR_CAUSE			0x0000
-#define	SDMA_INTR_MASK			0x0080
-
-/* Baud Rate Generator Interface Registers */
-#define	BRG_BCR				0x0000
-#define	BRG_BTR				0x0004
-
-/*
- * Define how this driver is known to the outside (we've been assigned a
- * range on the "Low-density serial ports" major).
- */
-#define MPSC_MAJOR			204
-#define MPSC_MINOR_START		44
-#define	MPSC_DRIVER_NAME		"MPSC"
-#define	MPSC_DEV_NAME			"ttyMM"
-#define	MPSC_VERSION			"1.00"
-
-static struct mpsc_port_info mpsc_ports[MPSC_NUM_CTLRS];
-static struct mpsc_shared_regs mpsc_shared_regs;
-static struct uart_driver mpsc_reg;
-
-static void mpsc_start_rx(struct mpsc_port_info *pi);
-static void mpsc_free_ring_mem(struct mpsc_port_info *pi);
-static void mpsc_release_port(struct uart_port *port);
-/*
- ******************************************************************************
- *
- * Baud Rate Generator Routines (BRG)
- *
- ******************************************************************************
- */
-static void mpsc_brg_init(struct mpsc_port_info *pi, u32 clk_src)
-{
-	u32	v;
-
-	v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
-	v = (v & ~(0xf << 18)) | ((clk_src & 0xf) << 18);
-
-	if (pi->brg_can_tune)
-		v &= ~(1 << 25);
-
-	if (pi->mirror_regs)
-		pi->BRG_BCR_m = v;
-	writel(v, pi->brg_base + BRG_BCR);
-
-	writel(readl(pi->brg_base + BRG_BTR) & 0xffff0000,
-		pi->brg_base + BRG_BTR);
-}
-
-static void mpsc_brg_enable(struct mpsc_port_info *pi)
-{
-	u32	v;
-
-	v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
-	v |= (1 << 16);
-
-	if (pi->mirror_regs)
-		pi->BRG_BCR_m = v;
-	writel(v, pi->brg_base + BRG_BCR);
-}
-
-static void mpsc_brg_disable(struct mpsc_port_info *pi)
-{
-	u32	v;
-
-	v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
-	v &= ~(1 << 16);
-
-	if (pi->mirror_regs)
-		pi->BRG_BCR_m = v;
-	writel(v, pi->brg_base + BRG_BCR);
-}
-
-/*
- * To set the baud, we adjust the CDV field in the BRG_BCR reg.
- * From manual: Baud = clk / ((CDV+1)*2) ==> CDV = (clk / (baud*2)) - 1.
- * However, the input clock is divided by 16 in the MPSC b/c of how
- * 'MPSC_MMCRH' was set up so we have to divide the 'clk' used in our
- * calculation by 16 to account for that.  So the real calculation
- * that accounts for the way the mpsc is set up is:
- * CDV = (clk / (baud*2*16)) - 1 ==> CDV = (clk / (baud << 5)) - 1.
- */
-static void mpsc_set_baudrate(struct mpsc_port_info *pi, u32 baud)
-{
-	u32	cdv = (pi->port.uartclk / (baud << 5)) - 1;
-	u32	v;
-
-	mpsc_brg_disable(pi);
-	v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
-	v = (v & 0xffff0000) | (cdv & 0xffff);
-
-	if (pi->mirror_regs)
-		pi->BRG_BCR_m = v;
-	writel(v, pi->brg_base + BRG_BCR);
-	mpsc_brg_enable(pi);
-}
-
-/*
- ******************************************************************************
- *
- * Serial DMA Routines (SDMA)
- *
- ******************************************************************************
- */
-
-static void mpsc_sdma_burstsize(struct mpsc_port_info *pi, u32 burst_size)
-{
-	u32	v;
-
-	pr_debug("mpsc_sdma_burstsize[%d]: burst_size: %d\n",
-			pi->port.line, burst_size);
-
-	burst_size >>= 3; /* Divide by 8 b/c reg values are 8-byte chunks */
-
-	if (burst_size < 2)
-		v = 0x0;	/* 1 64-bit word */
-	else if (burst_size < 4)
-		v = 0x1;	/* 2 64-bit words */
-	else if (burst_size < 8)
-		v = 0x2;	/* 4 64-bit words */
-	else
-		v = 0x3;	/* 8 64-bit words */
-
-	writel((readl(pi->sdma_base + SDMA_SDC) & (0x3 << 12)) | (v << 12),
-		pi->sdma_base + SDMA_SDC);
-}
-
-static void mpsc_sdma_init(struct mpsc_port_info *pi, u32 burst_size)
-{
-	pr_debug("mpsc_sdma_init[%d]: burst_size: %d\n", pi->port.line,
-		burst_size);
-
-	writel((readl(pi->sdma_base + SDMA_SDC) & 0x3ff) | 0x03f,
-		pi->sdma_base + SDMA_SDC);
-	mpsc_sdma_burstsize(pi, burst_size);
-}
-
-static u32 mpsc_sdma_intr_mask(struct mpsc_port_info *pi, u32 mask)
-{
-	u32	old, v;
-
-	pr_debug("mpsc_sdma_intr_mask[%d]: mask: 0x%x\n", pi->port.line, mask);
-
-	old = v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m :
-		readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
-
-	mask &= 0xf;
-	if (pi->port.line)
-		mask <<= 8;
-	v &= ~mask;
-
-	if (pi->mirror_regs)
-		pi->shared_regs->SDMA_INTR_MASK_m = v;
-	writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
-
-	if (pi->port.line)
-		old >>= 8;
-	return old & 0xf;
-}
-
-static void mpsc_sdma_intr_unmask(struct mpsc_port_info *pi, u32 mask)
-{
-	u32	v;
-
-	pr_debug("mpsc_sdma_intr_unmask[%d]: mask: 0x%x\n", pi->port.line,mask);
-
-	v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m
-		: readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
-
-	mask &= 0xf;
-	if (pi->port.line)
-		mask <<= 8;
-	v |= mask;
-
-	if (pi->mirror_regs)
-		pi->shared_regs->SDMA_INTR_MASK_m = v;
-	writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
-}
-
-static void mpsc_sdma_intr_ack(struct mpsc_port_info *pi)
-{
-	pr_debug("mpsc_sdma_intr_ack[%d]: Acknowledging IRQ\n", pi->port.line);
-
-	if (pi->mirror_regs)
-		pi->shared_regs->SDMA_INTR_CAUSE_m = 0;
-	writeb(0x00, pi->shared_regs->sdma_intr_base + SDMA_INTR_CAUSE
-			+ pi->port.line);
-}
-
-static void mpsc_sdma_set_rx_ring(struct mpsc_port_info *pi,
-		struct mpsc_rx_desc *rxre_p)
-{
-	pr_debug("mpsc_sdma_set_rx_ring[%d]: rxre_p: 0x%x\n",
-		pi->port.line, (u32)rxre_p);
-
-	writel((u32)rxre_p, pi->sdma_base + SDMA_SCRDP);
-}
-
-static void mpsc_sdma_set_tx_ring(struct mpsc_port_info *pi,
-		struct mpsc_tx_desc *txre_p)
-{
-	writel((u32)txre_p, pi->sdma_base + SDMA_SFTDP);
-	writel((u32)txre_p, pi->sdma_base + SDMA_SCTDP);
-}
-
-static void mpsc_sdma_cmd(struct mpsc_port_info *pi, u32 val)
-{
-	u32	v;
-
-	v = readl(pi->sdma_base + SDMA_SDCM);
-	if (val)
-		v |= val;
-	else
-		v = 0;
-	wmb();
-	writel(v, pi->sdma_base + SDMA_SDCM);
-	wmb();
-}
-
-static uint mpsc_sdma_tx_active(struct mpsc_port_info *pi)
-{
-	return readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_TXD;
-}
-
-static void mpsc_sdma_start_tx(struct mpsc_port_info *pi)
-{
-	struct mpsc_tx_desc *txre, *txre_p;
-
-	/* If tx isn't running & there's a desc ready to go, start it */
-	if (!mpsc_sdma_tx_active(pi)) {
-		txre = (struct mpsc_tx_desc *)(pi->txr
-				+ (pi->txr_tail * MPSC_TXRE_SIZE));
-		dma_cache_sync(pi->port.dev, (void *)txre, MPSC_TXRE_SIZE,
-				DMA_FROM_DEVICE);
-#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
-		if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
-			invalidate_dcache_range((ulong)txre,
-					(ulong)txre + MPSC_TXRE_SIZE);
-#endif
-
-		if (be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O) {
-			txre_p = (struct mpsc_tx_desc *)
-				(pi->txr_p + (pi->txr_tail * MPSC_TXRE_SIZE));
-
-			mpsc_sdma_set_tx_ring(pi, txre_p);
-			mpsc_sdma_cmd(pi, SDMA_SDCM_STD | SDMA_SDCM_TXD);
-		}
-	}
-}
-
-static void mpsc_sdma_stop(struct mpsc_port_info *pi)
-{
-	pr_debug("mpsc_sdma_stop[%d]: Stopping SDMA\n", pi->port.line);
-
-	/* Abort any SDMA transfers */
-	mpsc_sdma_cmd(pi, 0);
-	mpsc_sdma_cmd(pi, SDMA_SDCM_AR | SDMA_SDCM_AT);
-
-	/* Clear the SDMA current and first TX and RX pointers */
-	mpsc_sdma_set_tx_ring(pi, NULL);
-	mpsc_sdma_set_rx_ring(pi, NULL);
-
-	/* Disable interrupts */
-	mpsc_sdma_intr_mask(pi, 0xf);
-	mpsc_sdma_intr_ack(pi);
-}
-
-/*
- ******************************************************************************
- *
- * Multi-Protocol Serial Controller Routines (MPSC)
- *
- ******************************************************************************
- */
-
-static void mpsc_hw_init(struct mpsc_port_info *pi)
-{
-	u32	v;
-
-	pr_debug("mpsc_hw_init[%d]: Initializing hardware\n", pi->port.line);
-
-	/* Set up clock routing */
-	if (pi->mirror_regs) {
-		v = pi->shared_regs->MPSC_MRR_m;
-		v &= ~0x1c7;
-		pi->shared_regs->MPSC_MRR_m = v;
-		writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR);
-
-		v = pi->shared_regs->MPSC_RCRR_m;
-		v = (v & ~0xf0f) | 0x100;
-		pi->shared_regs->MPSC_RCRR_m = v;
-		writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR);
-
-		v = pi->shared_regs->MPSC_TCRR_m;
-		v = (v & ~0xf0f) | 0x100;
-		pi->shared_regs->MPSC_TCRR_m = v;
-		writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR);
-	} else {
-		v = readl(pi->shared_regs->mpsc_routing_base + MPSC_MRR);
-		v &= ~0x1c7;
-		writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR);
-
-		v = readl(pi->shared_regs->mpsc_routing_base + MPSC_RCRR);
-		v = (v & ~0xf0f) | 0x100;
-		writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR);
-
-		v = readl(pi->shared_regs->mpsc_routing_base + MPSC_TCRR);
-		v = (v & ~0xf0f) | 0x100;
-		writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR);
-	}
-
-	/* Put MPSC in UART mode & enabel Tx/Rx egines */
-	writel(0x000004c4, pi->mpsc_base + MPSC_MMCRL);
-
-	/* No preamble, 16x divider, low-latency, */
-	writel(0x04400400, pi->mpsc_base + MPSC_MMCRH);
-	mpsc_set_baudrate(pi, pi->default_baud);
-
-	if (pi->mirror_regs) {
-		pi->MPSC_CHR_1_m = 0;
-		pi->MPSC_CHR_2_m = 0;
-	}
-	writel(0, pi->mpsc_base + MPSC_CHR_1);
-	writel(0, pi->mpsc_base + MPSC_CHR_2);
-	writel(pi->mpsc_max_idle, pi->mpsc_base + MPSC_CHR_3);
-	writel(0, pi->mpsc_base + MPSC_CHR_4);
-	writel(0, pi->mpsc_base + MPSC_CHR_5);
-	writel(0, pi->mpsc_base + MPSC_CHR_6);
-	writel(0, pi->mpsc_base + MPSC_CHR_7);
-	writel(0, pi->mpsc_base + MPSC_CHR_8);
-	writel(0, pi->mpsc_base + MPSC_CHR_9);
-	writel(0, pi->mpsc_base + MPSC_CHR_10);
-}
-
-static void mpsc_enter_hunt(struct mpsc_port_info *pi)
-{
-	pr_debug("mpsc_enter_hunt[%d]: Hunting...\n", pi->port.line);
-
-	if (pi->mirror_regs) {
-		writel(pi->MPSC_CHR_2_m | MPSC_CHR_2_EH,
-			pi->mpsc_base + MPSC_CHR_2);
-		/* Erratum prevents reading CHR_2 so just delay for a while */
-		udelay(100);
-	} else {
-		writel(readl(pi->mpsc_base + MPSC_CHR_2) | MPSC_CHR_2_EH,
-				pi->mpsc_base + MPSC_CHR_2);
-
-		while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_EH)
-			udelay(10);
-	}
-}
-
-static void mpsc_freeze(struct mpsc_port_info *pi)
-{
-	u32	v;
-
-	pr_debug("mpsc_freeze[%d]: Freezing\n", pi->port.line);
-
-	v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
-		readl(pi->mpsc_base + MPSC_MPCR);
-	v |= MPSC_MPCR_FRZ;
-
-	if (pi->mirror_regs)
-		pi->MPSC_MPCR_m = v;
-	writel(v, pi->mpsc_base + MPSC_MPCR);
-}
-
-static void mpsc_unfreeze(struct mpsc_port_info *pi)
-{
-	u32	v;
-
-	v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
-		readl(pi->mpsc_base + MPSC_MPCR);
-	v &= ~MPSC_MPCR_FRZ;
-
-	if (pi->mirror_regs)
-		pi->MPSC_MPCR_m = v;
-	writel(v, pi->mpsc_base + MPSC_MPCR);
-
-	pr_debug("mpsc_unfreeze[%d]: Unfrozen\n", pi->port.line);
-}
-
-static void mpsc_set_char_length(struct mpsc_port_info *pi, u32 len)
-{
-	u32	v;
-
-	pr_debug("mpsc_set_char_length[%d]: char len: %d\n", pi->port.line,len);
-
-	v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
-		readl(pi->mpsc_base + MPSC_MPCR);
-	v = (v & ~(0x3 << 12)) | ((len & 0x3) << 12);
-
-	if (pi->mirror_regs)
-		pi->MPSC_MPCR_m = v;
-	writel(v, pi->mpsc_base + MPSC_MPCR);
-}
-
-static void mpsc_set_stop_bit_length(struct mpsc_port_info *pi, u32 len)
-{
-	u32	v;
-
-	pr_debug("mpsc_set_stop_bit_length[%d]: stop bits: %d\n",
-		pi->port.line, len);
-
-	v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
-		readl(pi->mpsc_base + MPSC_MPCR);
-
-	v = (v & ~(1 << 14)) | ((len & 0x1) << 14);
-
-	if (pi->mirror_regs)
-		pi->MPSC_MPCR_m = v;
-	writel(v, pi->mpsc_base + MPSC_MPCR);
-}
-
-static void mpsc_set_parity(struct mpsc_port_info *pi, u32 p)
-{
-	u32	v;
-
-	pr_debug("mpsc_set_parity[%d]: parity bits: 0x%x\n", pi->port.line, p);
-
-	v = (pi->mirror_regs) ? pi->MPSC_CHR_2_m :
-		readl(pi->mpsc_base + MPSC_CHR_2);
-
-	p &= 0x3;
-	v = (v & ~0xc000c) | (p << 18) | (p << 2);
-
-	if (pi->mirror_regs)
-		pi->MPSC_CHR_2_m = v;
-	writel(v, pi->mpsc_base + MPSC_CHR_2);
-}
-
-/*
- ******************************************************************************
- *
- * Driver Init Routines
- *
- ******************************************************************************
- */
-
-static void mpsc_init_hw(struct mpsc_port_info *pi)
-{
-	pr_debug("mpsc_init_hw[%d]: Initializing\n", pi->port.line);
-
-	mpsc_brg_init(pi, pi->brg_clk_src);
-	mpsc_brg_enable(pi);
-	mpsc_sdma_init(pi, dma_get_cache_alignment());	/* burst a cacheline */
-	mpsc_sdma_stop(pi);
-	mpsc_hw_init(pi);
-}
-
-static int mpsc_alloc_ring_mem(struct mpsc_port_info *pi)
-{
-	int rc = 0;
-
-	pr_debug("mpsc_alloc_ring_mem[%d]: Allocating ring mem\n",
-		pi->port.line);
-
-	if (!pi->dma_region) {
-		if (!dma_supported(pi->port.dev, 0xffffffff)) {
-			printk(KERN_ERR "MPSC: Inadequate DMA support\n");
-			rc = -ENXIO;
-		} else if ((pi->dma_region = dma_alloc_noncoherent(pi->port.dev,
-						MPSC_DMA_ALLOC_SIZE,
-						&pi->dma_region_p, GFP_KERNEL))
-				== NULL) {
-			printk(KERN_ERR "MPSC: Can't alloc Desc region\n");
-			rc = -ENOMEM;
-		}
-	}
-
-	return rc;
-}
-
-static void mpsc_free_ring_mem(struct mpsc_port_info *pi)
-{
-	pr_debug("mpsc_free_ring_mem[%d]: Freeing ring mem\n", pi->port.line);
-
-	if (pi->dma_region) {
-		dma_free_noncoherent(pi->port.dev, MPSC_DMA_ALLOC_SIZE,
-				pi->dma_region, pi->dma_region_p);
-		pi->dma_region = NULL;
-		pi->dma_region_p = (dma_addr_t)NULL;
-	}
-}
-
-static void mpsc_init_rings(struct mpsc_port_info *pi)
-{
-	struct mpsc_rx_desc *rxre;
-	struct mpsc_tx_desc *txre;
-	dma_addr_t dp, dp_p;
-	u8 *bp, *bp_p;
-	int i;
-
-	pr_debug("mpsc_init_rings[%d]: Initializing rings\n", pi->port.line);
-
-	BUG_ON(pi->dma_region == NULL);
-
-	memset(pi->dma_region, 0, MPSC_DMA_ALLOC_SIZE);
-
-	/*
-	 * Descriptors & buffers are multiples of cacheline size and must be
-	 * cacheline aligned.
-	 */
-	dp = ALIGN((u32)pi->dma_region, dma_get_cache_alignment());
-	dp_p = ALIGN((u32)pi->dma_region_p, dma_get_cache_alignment());
-
-	/*
-	 * Partition dma region into rx ring descriptor, rx buffers,
-	 * tx ring descriptors, and tx buffers.
-	 */
-	pi->rxr = dp;
-	pi->rxr_p = dp_p;
-	dp += MPSC_RXR_SIZE;
-	dp_p += MPSC_RXR_SIZE;
-
-	pi->rxb = (u8 *)dp;
-	pi->rxb_p = (u8 *)dp_p;
-	dp += MPSC_RXB_SIZE;
-	dp_p += MPSC_RXB_SIZE;
-
-	pi->rxr_posn = 0;
-
-	pi->txr = dp;
-	pi->txr_p = dp_p;
-	dp += MPSC_TXR_SIZE;
-	dp_p += MPSC_TXR_SIZE;
-
-	pi->txb = (u8 *)dp;
-	pi->txb_p = (u8 *)dp_p;
-
-	pi->txr_head = 0;
-	pi->txr_tail = 0;
-
-	/* Init rx ring descriptors */
-	dp = pi->rxr;
-	dp_p = pi->rxr_p;
-	bp = pi->rxb;
-	bp_p = pi->rxb_p;
-
-	for (i = 0; i < MPSC_RXR_ENTRIES; i++) {
-		rxre = (struct mpsc_rx_desc *)dp;
-
-		rxre->bufsize = cpu_to_be16(MPSC_RXBE_SIZE);
-		rxre->bytecnt = cpu_to_be16(0);
-		rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O
-				| SDMA_DESC_CMDSTAT_EI | SDMA_DESC_CMDSTAT_F
-				| SDMA_DESC_CMDSTAT_L);
-		rxre->link = cpu_to_be32(dp_p + MPSC_RXRE_SIZE);
-		rxre->buf_ptr = cpu_to_be32(bp_p);
-
-		dp += MPSC_RXRE_SIZE;
-		dp_p += MPSC_RXRE_SIZE;
-		bp += MPSC_RXBE_SIZE;
-		bp_p += MPSC_RXBE_SIZE;
-	}
-	rxre->link = cpu_to_be32(pi->rxr_p);	/* Wrap last back to first */
-
-	/* Init tx ring descriptors */
-	dp = pi->txr;
-	dp_p = pi->txr_p;
-	bp = pi->txb;
-	bp_p = pi->txb_p;
-
-	for (i = 0; i < MPSC_TXR_ENTRIES; i++) {
-		txre = (struct mpsc_tx_desc *)dp;
-
-		txre->link = cpu_to_be32(dp_p + MPSC_TXRE_SIZE);
-		txre->buf_ptr = cpu_to_be32(bp_p);
-
-		dp += MPSC_TXRE_SIZE;
-		dp_p += MPSC_TXRE_SIZE;
-		bp += MPSC_TXBE_SIZE;
-		bp_p += MPSC_TXBE_SIZE;
-	}
-	txre->link = cpu_to_be32(pi->txr_p);	/* Wrap last back to first */
-
-	dma_cache_sync(pi->port.dev, (void *)pi->dma_region,
-			MPSC_DMA_ALLOC_SIZE, DMA_BIDIRECTIONAL);
-#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
-		if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
-			flush_dcache_range((ulong)pi->dma_region,
-					(ulong)pi->dma_region
-					+ MPSC_DMA_ALLOC_SIZE);
-#endif
-
-	return;
-}
-
-static void mpsc_uninit_rings(struct mpsc_port_info *pi)
-{
-	pr_debug("mpsc_uninit_rings[%d]: Uninitializing rings\n",pi->port.line);
-
-	BUG_ON(pi->dma_region == NULL);
-
-	pi->rxr = 0;
-	pi->rxr_p = 0;
-	pi->rxb = NULL;
-	pi->rxb_p = NULL;
-	pi->rxr_posn = 0;
-
-	pi->txr = 0;
-	pi->txr_p = 0;
-	pi->txb = NULL;
-	pi->txb_p = NULL;
-	pi->txr_head = 0;
-	pi->txr_tail = 0;
-}
-
-static int mpsc_make_ready(struct mpsc_port_info *pi)
-{
-	int rc;
-
-	pr_debug("mpsc_make_ready[%d]: Making cltr ready\n", pi->port.line);
-
-	if (!pi->ready) {
-		mpsc_init_hw(pi);
-		if ((rc = mpsc_alloc_ring_mem(pi)))
-			return rc;
-		mpsc_init_rings(pi);
-		pi->ready = 1;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_CONSOLE_POLL
-static int serial_polled;
-#endif
-
-/*
- ******************************************************************************
- *
- * Interrupt Handling Routines
- *
- ******************************************************************************
- */
-
-static int mpsc_rx_intr(struct mpsc_port_info *pi)
-{
-	struct mpsc_rx_desc *rxre;
-	struct tty_struct *tty = pi->port.state->port.tty;
-	u32	cmdstat, bytes_in, i;
-	int	rc = 0;
-	u8	*bp;
-	char	flag = TTY_NORMAL;
-
-	pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line);
-
-	rxre = (struct mpsc_rx_desc *)(pi->rxr + (pi->rxr_posn*MPSC_RXRE_SIZE));
-
-	dma_cache_sync(pi->port.dev, (void *)rxre, MPSC_RXRE_SIZE,
-			DMA_FROM_DEVICE);
-#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
-	if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
-		invalidate_dcache_range((ulong)rxre,
-				(ulong)rxre + MPSC_RXRE_SIZE);
-#endif
-
-	/*
-	 * Loop through Rx descriptors handling ones that have been completed.
-	 */
-	while (!((cmdstat = be32_to_cpu(rxre->cmdstat))
-				& SDMA_DESC_CMDSTAT_O)) {
-		bytes_in = be16_to_cpu(rxre->bytecnt);
-#ifdef CONFIG_CONSOLE_POLL
-		if (unlikely(serial_polled)) {
-			serial_polled = 0;
-			return 0;
-		}
-#endif
-		/* Following use of tty struct directly is deprecated */
-		if (unlikely(tty_buffer_request_room(tty, bytes_in)
-					< bytes_in)) {
-			if (tty->low_latency)
-				tty_flip_buffer_push(tty);
-			/*
-			 * If this failed then we will throw away the bytes
-			 * but must do so to clear interrupts.
-			 */
-		}
-
-		bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE);
-		dma_cache_sync(pi->port.dev, (void *)bp, MPSC_RXBE_SIZE,
-				DMA_FROM_DEVICE);
-#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
-		if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
-			invalidate_dcache_range((ulong)bp,
-					(ulong)bp + MPSC_RXBE_SIZE);
-#endif
-
-		/*
-		 * Other than for parity error, the manual provides little
-		 * info on what data will be in a frame flagged by any of
-		 * these errors.  For parity error, it is the last byte in
-		 * the buffer that had the error.  As for the rest, I guess
-		 * we'll assume there is no data in the buffer.
-		 * If there is...it gets lost.
-		 */
-		if (unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR
-						| SDMA_DESC_CMDSTAT_FR
-						| SDMA_DESC_CMDSTAT_OR))) {
-
-			pi->port.icount.rx++;
-
-			if (cmdstat & SDMA_DESC_CMDSTAT_BR) {	/* Break */
-				pi->port.icount.brk++;
-
-				if (uart_handle_break(&pi->port))
-					goto next_frame;
-			} else if (cmdstat & SDMA_DESC_CMDSTAT_FR) {
-				pi->port.icount.frame++;
-			} else if (cmdstat & SDMA_DESC_CMDSTAT_OR) {
-				pi->port.icount.overrun++;
-			}
-
-			cmdstat &= pi->port.read_status_mask;
-
-			if (cmdstat & SDMA_DESC_CMDSTAT_BR)
-				flag = TTY_BREAK;
-			else if (cmdstat & SDMA_DESC_CMDSTAT_FR)
-				flag = TTY_FRAME;
-			else if (cmdstat & SDMA_DESC_CMDSTAT_OR)
-				flag = TTY_OVERRUN;
-			else if (cmdstat & SDMA_DESC_CMDSTAT_PE)
-				flag = TTY_PARITY;
-		}
-
-		if (uart_handle_sysrq_char(&pi->port, *bp)) {
-			bp++;
-			bytes_in--;
-#ifdef CONFIG_CONSOLE_POLL
-			if (unlikely(serial_polled)) {
-				serial_polled = 0;
-				return 0;
-			}
-#endif
-			goto next_frame;
-		}
-
-		if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR
-						| SDMA_DESC_CMDSTAT_FR
-						| SDMA_DESC_CMDSTAT_OR)))
-				&& !(cmdstat & pi->port.ignore_status_mask)) {
-			tty_insert_flip_char(tty, *bp, flag);
-		} else {
-			for (i=0; i<bytes_in; i++)
-				tty_insert_flip_char(tty, *bp++, TTY_NORMAL);
-
-			pi->port.icount.rx += bytes_in;
-		}
-
-next_frame:
-		rxre->bytecnt = cpu_to_be16(0);
-		wmb();
-		rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O
-				| SDMA_DESC_CMDSTAT_EI | SDMA_DESC_CMDSTAT_F
-				| SDMA_DESC_CMDSTAT_L);
-		wmb();
-		dma_cache_sync(pi->port.dev, (void *)rxre, MPSC_RXRE_SIZE,
-				DMA_BIDIRECTIONAL);
-#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
-		if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
-			flush_dcache_range((ulong)rxre,
-					(ulong)rxre + MPSC_RXRE_SIZE);
-#endif
-
-		/* Advance to next descriptor */
-		pi->rxr_posn = (pi->rxr_posn + 1) & (MPSC_RXR_ENTRIES - 1);
-		rxre = (struct mpsc_rx_desc *)
-			(pi->rxr + (pi->rxr_posn * MPSC_RXRE_SIZE));
-		dma_cache_sync(pi->port.dev, (void *)rxre, MPSC_RXRE_SIZE,
-				DMA_FROM_DEVICE);
-#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
-		if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
-			invalidate_dcache_range((ulong)rxre,
-					(ulong)rxre + MPSC_RXRE_SIZE);
-#endif
-		rc = 1;
-	}
-
-	/* Restart rx engine, if its stopped */
-	if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0)
-		mpsc_start_rx(pi);
-
-	tty_flip_buffer_push(tty);
-	return rc;
-}
-
-static void mpsc_setup_tx_desc(struct mpsc_port_info *pi, u32 count, u32 intr)
-{
-	struct mpsc_tx_desc *txre;
-
-	txre = (struct mpsc_tx_desc *)(pi->txr
-			+ (pi->txr_head * MPSC_TXRE_SIZE));
-
-	txre->bytecnt = cpu_to_be16(count);
-	txre->shadow = txre->bytecnt;
-	wmb();			/* ensure cmdstat is last field updated */
-	txre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O | SDMA_DESC_CMDSTAT_F
-			| SDMA_DESC_CMDSTAT_L
-			| ((intr) ? SDMA_DESC_CMDSTAT_EI : 0));
-	wmb();
-	dma_cache_sync(pi->port.dev, (void *)txre, MPSC_TXRE_SIZE,
-			DMA_BIDIRECTIONAL);
-#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
-	if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
-		flush_dcache_range((ulong)txre,
-				(ulong)txre + MPSC_TXRE_SIZE);
-#endif
-}
-
-static void mpsc_copy_tx_data(struct mpsc_port_info *pi)
-{
-	struct circ_buf *xmit = &pi->port.state->xmit;
-	u8 *bp;
-	u32 i;
-
-	/* Make sure the desc ring isn't full */
-	while (CIRC_CNT(pi->txr_head, pi->txr_tail, MPSC_TXR_ENTRIES)
-			< (MPSC_TXR_ENTRIES - 1)) {
-		if (pi->port.x_char) {
-			/*
-			 * Ideally, we should use the TCS field in
-			 * CHR_1 to put the x_char out immediately but
-			 * errata prevents us from being able to read
-			 * CHR_2 to know that its safe to write to
-			 * CHR_1.  Instead, just put it in-band with
-			 * all the other Tx data.
-			 */
-			bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE);
-			*bp = pi->port.x_char;
-			pi->port.x_char = 0;
-			i = 1;
-		} else if (!uart_circ_empty(xmit)
-				&& !uart_tx_stopped(&pi->port)) {
-			i = min((u32)MPSC_TXBE_SIZE,
-				(u32)uart_circ_chars_pending(xmit));
-			i = min(i, (u32)CIRC_CNT_TO_END(xmit->head, xmit->tail,
-				UART_XMIT_SIZE));
-			bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE);
-			memcpy(bp, &xmit->buf[xmit->tail], i);
-			xmit->tail = (xmit->tail + i) & (UART_XMIT_SIZE - 1);
-
-			if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-				uart_write_wakeup(&pi->port);
-		} else { /* All tx data copied into ring bufs */
-			return;
-		}
-
-		dma_cache_sync(pi->port.dev, (void *)bp, MPSC_TXBE_SIZE,
-				DMA_BIDIRECTIONAL);
-#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
-		if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
-			flush_dcache_range((ulong)bp,
-					(ulong)bp + MPSC_TXBE_SIZE);
-#endif
-		mpsc_setup_tx_desc(pi, i, 1);
-
-		/* Advance to next descriptor */
-		pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1);
-	}
-}
-
-static int mpsc_tx_intr(struct mpsc_port_info *pi)
-{
-	struct mpsc_tx_desc *txre;
-	int rc = 0;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&pi->tx_lock, iflags);
-
-	if (!mpsc_sdma_tx_active(pi)) {
-		txre = (struct mpsc_tx_desc *)(pi->txr
-				+ (pi->txr_tail * MPSC_TXRE_SIZE));
-
-		dma_cache_sync(pi->port.dev, (void *)txre, MPSC_TXRE_SIZE,
-				DMA_FROM_DEVICE);
-#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
-		if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
-			invalidate_dcache_range((ulong)txre,
-					(ulong)txre + MPSC_TXRE_SIZE);
-#endif
-
-		while (!(be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O)) {
-			rc = 1;
-			pi->port.icount.tx += be16_to_cpu(txre->bytecnt);
-			pi->txr_tail = (pi->txr_tail+1) & (MPSC_TXR_ENTRIES-1);
-
-			/* If no more data to tx, fall out of loop */
-			if (pi->txr_head == pi->txr_tail)
-				break;
-
-			txre = (struct mpsc_tx_desc *)(pi->txr
-					+ (pi->txr_tail * MPSC_TXRE_SIZE));
-			dma_cache_sync(pi->port.dev, (void *)txre,
-					MPSC_TXRE_SIZE, DMA_FROM_DEVICE);
-#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
-			if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
-				invalidate_dcache_range((ulong)txre,
-						(ulong)txre + MPSC_TXRE_SIZE);
-#endif
-		}
-
-		mpsc_copy_tx_data(pi);
-		mpsc_sdma_start_tx(pi);	/* start next desc if ready */
-	}
-
-	spin_unlock_irqrestore(&pi->tx_lock, iflags);
-	return rc;
-}
-
-/*
- * This is the driver's interrupt handler.  To avoid a race, we first clear
- * the interrupt, then handle any completed Rx/Tx descriptors.  When done
- * handling those descriptors, we restart the Rx/Tx engines if they're stopped.
- */
-static irqreturn_t mpsc_sdma_intr(int irq, void *dev_id)
-{
-	struct mpsc_port_info *pi = dev_id;
-	ulong iflags;
-	int rc = IRQ_NONE;
-
-	pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Received\n",pi->port.line);
-
-	spin_lock_irqsave(&pi->port.lock, iflags);
-	mpsc_sdma_intr_ack(pi);
-	if (mpsc_rx_intr(pi))
-		rc = IRQ_HANDLED;
-	if (mpsc_tx_intr(pi))
-		rc = IRQ_HANDLED;
-	spin_unlock_irqrestore(&pi->port.lock, iflags);
-
-	pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Handled\n", pi->port.line);
-	return rc;
-}
-
-/*
- ******************************************************************************
- *
- * serial_core.c Interface routines
- *
- ******************************************************************************
- */
-static uint mpsc_tx_empty(struct uart_port *port)
-{
-	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
-	ulong iflags;
-	uint rc;
-
-	spin_lock_irqsave(&pi->port.lock, iflags);
-	rc = mpsc_sdma_tx_active(pi) ? 0 : TIOCSER_TEMT;
-	spin_unlock_irqrestore(&pi->port.lock, iflags);
-
-	return rc;
-}
-
-static void mpsc_set_mctrl(struct uart_port *port, uint mctrl)
-{
-	/* Have no way to set modem control lines AFAICT */
-}
-
-static uint mpsc_get_mctrl(struct uart_port *port)
-{
-	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
-	u32 mflags, status;
-
-	status = (pi->mirror_regs) ? pi->MPSC_CHR_10_m
-		: readl(pi->mpsc_base + MPSC_CHR_10);
-
-	mflags = 0;
-	if (status & 0x1)
-		mflags |= TIOCM_CTS;
-	if (status & 0x2)
-		mflags |= TIOCM_CAR;
-
-	return mflags | TIOCM_DSR;	/* No way to tell if DSR asserted */
-}
-
-static void mpsc_stop_tx(struct uart_port *port)
-{
-	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
-
-	pr_debug("mpsc_stop_tx[%d]\n", port->line);
-
-	mpsc_freeze(pi);
-}
-
-static void mpsc_start_tx(struct uart_port *port)
-{
-	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&pi->tx_lock, iflags);
-
-	mpsc_unfreeze(pi);
-	mpsc_copy_tx_data(pi);
-	mpsc_sdma_start_tx(pi);
-
-	spin_unlock_irqrestore(&pi->tx_lock, iflags);
-
-	pr_debug("mpsc_start_tx[%d]\n", port->line);
-}
-
-static void mpsc_start_rx(struct mpsc_port_info *pi)
-{
-	pr_debug("mpsc_start_rx[%d]: Starting...\n", pi->port.line);
-
-	if (pi->rcv_data) {
-		mpsc_enter_hunt(pi);
-		mpsc_sdma_cmd(pi, SDMA_SDCM_ERD);
-	}
-}
-
-static void mpsc_stop_rx(struct uart_port *port)
-{
-	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
-
-	pr_debug("mpsc_stop_rx[%d]: Stopping...\n", port->line);
-
-	if (pi->mirror_regs) {
-		writel(pi->MPSC_CHR_2_m | MPSC_CHR_2_RA,
-				pi->mpsc_base + MPSC_CHR_2);
-		/* Erratum prevents reading CHR_2 so just delay for a while */
-		udelay(100);
-	} else {
-		writel(readl(pi->mpsc_base + MPSC_CHR_2) | MPSC_CHR_2_RA,
-				pi->mpsc_base + MPSC_CHR_2);
-
-		while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_RA)
-			udelay(10);
-	}
-
-	mpsc_sdma_cmd(pi, SDMA_SDCM_AR);
-}
-
-static void mpsc_enable_ms(struct uart_port *port)
-{
-}
-
-static void mpsc_break_ctl(struct uart_port *port, int ctl)
-{
-	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
-	ulong	flags;
-	u32	v;
-
-	v = ctl ? 0x00ff0000 : 0;
-
-	spin_lock_irqsave(&pi->port.lock, flags);
-	if (pi->mirror_regs)
-		pi->MPSC_CHR_1_m = v;
-	writel(v, pi->mpsc_base + MPSC_CHR_1);
-	spin_unlock_irqrestore(&pi->port.lock, flags);
-}
-
-static int mpsc_startup(struct uart_port *port)
-{
-	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
-	u32 flag = 0;
-	int rc;
-
-	pr_debug("mpsc_startup[%d]: Starting up MPSC, irq: %d\n",
-		port->line, pi->port.irq);
-
-	if ((rc = mpsc_make_ready(pi)) == 0) {
-		/* Setup IRQ handler */
-		mpsc_sdma_intr_ack(pi);
-
-		/* If irq's are shared, need to set flag */
-		if (mpsc_ports[0].port.irq == mpsc_ports[1].port.irq)
-			flag = IRQF_SHARED;
-
-		if (request_irq(pi->port.irq, mpsc_sdma_intr, flag,
-					"mpsc-sdma", pi))
-			printk(KERN_ERR "MPSC: Can't get SDMA IRQ %d\n",
-					pi->port.irq);
-
-		mpsc_sdma_intr_unmask(pi, 0xf);
-		mpsc_sdma_set_rx_ring(pi, (struct mpsc_rx_desc *)(pi->rxr_p
-					+ (pi->rxr_posn * MPSC_RXRE_SIZE)));
-	}
-
-	return rc;
-}
-
-static void mpsc_shutdown(struct uart_port *port)
-{
-	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
-
-	pr_debug("mpsc_shutdown[%d]: Shutting down MPSC\n", port->line);
-
-	mpsc_sdma_stop(pi);
-	free_irq(pi->port.irq, pi);
-}
-
-static void mpsc_set_termios(struct uart_port *port, struct ktermios *termios,
-		 struct ktermios *old)
-{
-	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
-	u32 baud;
-	ulong flags;
-	u32 chr_bits, stop_bits, par;
-
-	pi->c_iflag = termios->c_iflag;
-	pi->c_cflag = termios->c_cflag;
-
-	switch (termios->c_cflag & CSIZE) {
-	case CS5:
-		chr_bits = MPSC_MPCR_CL_5;
-		break;
-	case CS6:
-		chr_bits = MPSC_MPCR_CL_6;
-		break;
-	case CS7:
-		chr_bits = MPSC_MPCR_CL_7;
-		break;
-	case CS8:
-	default:
-		chr_bits = MPSC_MPCR_CL_8;
-		break;
-	}
-
-	if (termios->c_cflag & CSTOPB)
-		stop_bits = MPSC_MPCR_SBL_2;
-	else
-		stop_bits = MPSC_MPCR_SBL_1;
-
-	par = MPSC_CHR_2_PAR_EVEN;
-	if (termios->c_cflag & PARENB)
-		if (termios->c_cflag & PARODD)
-			par = MPSC_CHR_2_PAR_ODD;
-#ifdef	CMSPAR
-		if (termios->c_cflag & CMSPAR) {
-			if (termios->c_cflag & PARODD)
-				par = MPSC_CHR_2_PAR_MARK;
-			else
-				par = MPSC_CHR_2_PAR_SPACE;
-		}
-#endif
-
-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk);
-
-	spin_lock_irqsave(&pi->port.lock, flags);
-
-	uart_update_timeout(port, termios->c_cflag, baud);
-
-	mpsc_set_char_length(pi, chr_bits);
-	mpsc_set_stop_bit_length(pi, stop_bits);
-	mpsc_set_parity(pi, par);
-	mpsc_set_baudrate(pi, baud);
-
-	/* Characters/events to read */
-	pi->port.read_status_mask = SDMA_DESC_CMDSTAT_OR;
-
-	if (termios->c_iflag & INPCK)
-		pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_PE
-			| SDMA_DESC_CMDSTAT_FR;
-
-	if (termios->c_iflag & (BRKINT | PARMRK))
-		pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_BR;
-
-	/* Characters/events to ignore */
-	pi->port.ignore_status_mask = 0;
-
-	if (termios->c_iflag & IGNPAR)
-		pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_PE
-			| SDMA_DESC_CMDSTAT_FR;
-
-	if (termios->c_iflag & IGNBRK) {
-		pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_BR;
-
-		if (termios->c_iflag & IGNPAR)
-			pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_OR;
-	}
-
-	if ((termios->c_cflag & CREAD)) {
-		if (!pi->rcv_data) {
-			pi->rcv_data = 1;
-			mpsc_start_rx(pi);
-		}
-	} else if (pi->rcv_data) {
-		mpsc_stop_rx(port);
-		pi->rcv_data = 0;
-	}
-
-	spin_unlock_irqrestore(&pi->port.lock, flags);
-}
-
-static const char *mpsc_type(struct uart_port *port)
-{
-	pr_debug("mpsc_type[%d]: port type: %s\n", port->line,MPSC_DRIVER_NAME);
-	return MPSC_DRIVER_NAME;
-}
-
-static int mpsc_request_port(struct uart_port *port)
-{
-	/* Should make chip/platform specific call */
-	return 0;
-}
-
-static void mpsc_release_port(struct uart_port *port)
-{
-	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
-
-	if (pi->ready) {
-		mpsc_uninit_rings(pi);
-		mpsc_free_ring_mem(pi);
-		pi->ready = 0;
-	}
-}
-
-static void mpsc_config_port(struct uart_port *port, int flags)
-{
-}
-
-static int mpsc_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
-	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
-	int rc = 0;
-
-	pr_debug("mpsc_verify_port[%d]: Verifying port data\n", pi->port.line);
-
-	if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPSC)
-		rc = -EINVAL;
-	else if (pi->port.irq != ser->irq)
-		rc = -EINVAL;
-	else if (ser->io_type != SERIAL_IO_MEM)
-		rc = -EINVAL;
-	else if (pi->port.uartclk / 16 != ser->baud_base) /* Not sure */
-		rc = -EINVAL;
-	else if ((void *)pi->port.mapbase != ser->iomem_base)
-		rc = -EINVAL;
-	else if (pi->port.iobase != ser->port)
-		rc = -EINVAL;
-	else if (ser->hub6 != 0)
-		rc = -EINVAL;
-
-	return rc;
-}
-#ifdef CONFIG_CONSOLE_POLL
-/* Serial polling routines for writing and reading from the uart while
- * in an interrupt or debug context.
- */
-
-static char poll_buf[2048];
-static int poll_ptr;
-static int poll_cnt;
-static void mpsc_put_poll_char(struct uart_port *port,
-							   unsigned char c);
-
-static int mpsc_get_poll_char(struct uart_port *port)
-{
-	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
-	struct mpsc_rx_desc *rxre;
-	u32	cmdstat, bytes_in, i;
-	u8	*bp;
-
-	if (!serial_polled)
-		serial_polled = 1;
-
-	pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line);
-
-	if (poll_cnt) {
-		poll_cnt--;
-		return poll_buf[poll_ptr++];
-	}
-	poll_ptr = 0;
-	poll_cnt = 0;
-
-	while (poll_cnt == 0) {
-		rxre = (struct mpsc_rx_desc *)(pi->rxr +
-		       (pi->rxr_posn*MPSC_RXRE_SIZE));
-		dma_cache_sync(pi->port.dev, (void *)rxre,
-			       MPSC_RXRE_SIZE, DMA_FROM_DEVICE);
-#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
-		if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
-			invalidate_dcache_range((ulong)rxre,
-			(ulong)rxre + MPSC_RXRE_SIZE);
-#endif
-		/*
-		 * Loop through Rx descriptors handling ones that have
-		 * been completed.
-		 */
-		while (poll_cnt == 0 &&
-		       !((cmdstat = be32_to_cpu(rxre->cmdstat)) &
-			 SDMA_DESC_CMDSTAT_O)){
-			bytes_in = be16_to_cpu(rxre->bytecnt);
-			bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE);
-			dma_cache_sync(pi->port.dev, (void *) bp,
-				       MPSC_RXBE_SIZE, DMA_FROM_DEVICE);
-#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
-			if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
-				invalidate_dcache_range((ulong)bp,
-					(ulong)bp + MPSC_RXBE_SIZE);
-#endif
-			if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR |
-			 SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) &&
-				!(cmdstat & pi->port.ignore_status_mask)) {
-				poll_buf[poll_cnt] = *bp;
-				poll_cnt++;
-			} else {
-				for (i = 0; i < bytes_in; i++) {
-					poll_buf[poll_cnt] = *bp++;
-					poll_cnt++;
-				}
-				pi->port.icount.rx += bytes_in;
-			}
-			rxre->bytecnt = cpu_to_be16(0);
-			wmb();
-			rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O |
-						    SDMA_DESC_CMDSTAT_EI |
-						    SDMA_DESC_CMDSTAT_F |
-						    SDMA_DESC_CMDSTAT_L);
-			wmb();
-			dma_cache_sync(pi->port.dev, (void *)rxre,
-				       MPSC_RXRE_SIZE, DMA_BIDIRECTIONAL);
-#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
-			if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
-				flush_dcache_range((ulong)rxre,
-					   (ulong)rxre + MPSC_RXRE_SIZE);
-#endif
-
-			/* Advance to next descriptor */
-			pi->rxr_posn = (pi->rxr_posn + 1) &
-				(MPSC_RXR_ENTRIES - 1);
-			rxre = (struct mpsc_rx_desc *)(pi->rxr +
-				       (pi->rxr_posn * MPSC_RXRE_SIZE));
-			dma_cache_sync(pi->port.dev, (void *)rxre,
-				       MPSC_RXRE_SIZE, DMA_FROM_DEVICE);
-#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
-			if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
-				invalidate_dcache_range((ulong)rxre,
-						(ulong)rxre + MPSC_RXRE_SIZE);
-#endif
-		}
-
-		/* Restart rx engine, if its stopped */
-		if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0)
-			mpsc_start_rx(pi);
-	}
-	if (poll_cnt) {
-		poll_cnt--;
-		return poll_buf[poll_ptr++];
-	}
-
-	return 0;
-}
-
-
-static void mpsc_put_poll_char(struct uart_port *port,
-			 unsigned char c)
-{
-	struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
-	u32 data;
-
-	data = readl(pi->mpsc_base + MPSC_MPCR);
-	writeb(c, pi->mpsc_base + MPSC_CHR_1);
-	mb();
-	data = readl(pi->mpsc_base + MPSC_CHR_2);
-	data |= MPSC_CHR_2_TTCS;
-	writel(data, pi->mpsc_base + MPSC_CHR_2);
-	mb();
-
-	while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_TTCS);
-}
-#endif
-
-static struct uart_ops mpsc_pops = {
-	.tx_empty	= mpsc_tx_empty,
-	.set_mctrl	= mpsc_set_mctrl,
-	.get_mctrl	= mpsc_get_mctrl,
-	.stop_tx	= mpsc_stop_tx,
-	.start_tx	= mpsc_start_tx,
-	.stop_rx	= mpsc_stop_rx,
-	.enable_ms	= mpsc_enable_ms,
-	.break_ctl	= mpsc_break_ctl,
-	.startup	= mpsc_startup,
-	.shutdown	= mpsc_shutdown,
-	.set_termios	= mpsc_set_termios,
-	.type		= mpsc_type,
-	.release_port	= mpsc_release_port,
-	.request_port	= mpsc_request_port,
-	.config_port	= mpsc_config_port,
-	.verify_port	= mpsc_verify_port,
-#ifdef CONFIG_CONSOLE_POLL
-	.poll_get_char = mpsc_get_poll_char,
-	.poll_put_char = mpsc_put_poll_char,
-#endif
-};
-
-/*
- ******************************************************************************
- *
- * Console Interface Routines
- *
- ******************************************************************************
- */
-
-#ifdef CONFIG_SERIAL_MPSC_CONSOLE
-static void mpsc_console_write(struct console *co, const char *s, uint count)
-{
-	struct mpsc_port_info *pi = &mpsc_ports[co->index];
-	u8 *bp, *dp, add_cr = 0;
-	int i;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&pi->tx_lock, iflags);
-
-	while (pi->txr_head != pi->txr_tail) {
-		while (mpsc_sdma_tx_active(pi))
-			udelay(100);
-		mpsc_sdma_intr_ack(pi);
-		mpsc_tx_intr(pi);
-	}
-
-	while (mpsc_sdma_tx_active(pi))
-		udelay(100);
-
-	while (count > 0) {
-		bp = dp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE);
-
-		for (i = 0; i < MPSC_TXBE_SIZE; i++) {
-			if (count == 0)
-				break;
-
-			if (add_cr) {
-				*(dp++) = '\r';
-				add_cr = 0;
-			} else {
-				*(dp++) = *s;
-
-				if (*(s++) == '\n') { /* add '\r' after '\n' */
-					add_cr = 1;
-					count++;
-				}
-			}
-
-			count--;
-		}
-
-		dma_cache_sync(pi->port.dev, (void *)bp, MPSC_TXBE_SIZE,
-				DMA_BIDIRECTIONAL);
-#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
-		if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
-			flush_dcache_range((ulong)bp,
-					(ulong)bp + MPSC_TXBE_SIZE);
-#endif
-		mpsc_setup_tx_desc(pi, i, 0);
-		pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1);
-		mpsc_sdma_start_tx(pi);
-
-		while (mpsc_sdma_tx_active(pi))
-			udelay(100);
-
-		pi->txr_tail = (pi->txr_tail + 1) & (MPSC_TXR_ENTRIES - 1);
-	}
-
-	spin_unlock_irqrestore(&pi->tx_lock, iflags);
-}
-
-static int __init mpsc_console_setup(struct console *co, char *options)
-{
-	struct mpsc_port_info *pi;
-	int baud, bits, parity, flow;
-
-	pr_debug("mpsc_console_setup[%d]: options: %s\n", co->index, options);
-
-	if (co->index >= MPSC_NUM_CTLRS)
-		co->index = 0;
-
-	pi = &mpsc_ports[co->index];
-
-	baud = pi->default_baud;
-	bits = pi->default_bits;
-	parity = pi->default_parity;
-	flow = pi->default_flow;
-
-	if (!pi->port.ops)
-		return -ENODEV;
-
-	spin_lock_init(&pi->port.lock);	/* Temporary fix--copied from 8250.c */
-
-	if (options)
-		uart_parse_options(options, &baud, &parity, &bits, &flow);
-
-	return uart_set_options(&pi->port, co, baud, parity, bits, flow);
-}
-
-static struct console mpsc_console = {
-	.name	= MPSC_DEV_NAME,
-	.write	= mpsc_console_write,
-	.device	= uart_console_device,
-	.setup	= mpsc_console_setup,
-	.flags	= CON_PRINTBUFFER,
-	.index	= -1,
-	.data	= &mpsc_reg,
-};
-
-static int __init mpsc_late_console_init(void)
-{
-	pr_debug("mpsc_late_console_init: Enter\n");
-
-	if (!(mpsc_console.flags & CON_ENABLED))
-		register_console(&mpsc_console);
-	return 0;
-}
-
-late_initcall(mpsc_late_console_init);
-
-#define MPSC_CONSOLE	&mpsc_console
-#else
-#define MPSC_CONSOLE	NULL
-#endif
-/*
- ******************************************************************************
- *
- * Dummy Platform Driver to extract & map shared register regions
- *
- ******************************************************************************
- */
-static void mpsc_resource_err(char *s)
-{
-	printk(KERN_WARNING "MPSC: Platform device resource error in %s\n", s);
-}
-
-static int mpsc_shared_map_regs(struct platform_device *pd)
-{
-	struct resource	*r;
-
-	if ((r = platform_get_resource(pd, IORESOURCE_MEM,
-					MPSC_ROUTING_BASE_ORDER))
-			&& request_mem_region(r->start,
-				MPSC_ROUTING_REG_BLOCK_SIZE,
-				"mpsc_routing_regs")) {
-		mpsc_shared_regs.mpsc_routing_base = ioremap(r->start,
-				MPSC_ROUTING_REG_BLOCK_SIZE);
-		mpsc_shared_regs.mpsc_routing_base_p = r->start;
-	} else {
-		mpsc_resource_err("MPSC routing base");
-		return -ENOMEM;
-	}
-
-	if ((r = platform_get_resource(pd, IORESOURCE_MEM,
-					MPSC_SDMA_INTR_BASE_ORDER))
-			&& request_mem_region(r->start,
-				MPSC_SDMA_INTR_REG_BLOCK_SIZE,
-				"sdma_intr_regs")) {
-		mpsc_shared_regs.sdma_intr_base = ioremap(r->start,
-			MPSC_SDMA_INTR_REG_BLOCK_SIZE);
-		mpsc_shared_regs.sdma_intr_base_p = r->start;
-	} else {
-		iounmap(mpsc_shared_regs.mpsc_routing_base);
-		release_mem_region(mpsc_shared_regs.mpsc_routing_base_p,
-				MPSC_ROUTING_REG_BLOCK_SIZE);
-		mpsc_resource_err("SDMA intr base");
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
-static void mpsc_shared_unmap_regs(void)
-{
-	if (!mpsc_shared_regs.mpsc_routing_base) {
-		iounmap(mpsc_shared_regs.mpsc_routing_base);
-		release_mem_region(mpsc_shared_regs.mpsc_routing_base_p,
-				MPSC_ROUTING_REG_BLOCK_SIZE);
-	}
-	if (!mpsc_shared_regs.sdma_intr_base) {
-		iounmap(mpsc_shared_regs.sdma_intr_base);
-		release_mem_region(mpsc_shared_regs.sdma_intr_base_p,
-				MPSC_SDMA_INTR_REG_BLOCK_SIZE);
-	}
-
-	mpsc_shared_regs.mpsc_routing_base = NULL;
-	mpsc_shared_regs.sdma_intr_base = NULL;
-
-	mpsc_shared_regs.mpsc_routing_base_p = 0;
-	mpsc_shared_regs.sdma_intr_base_p = 0;
-}
-
-static int mpsc_shared_drv_probe(struct platform_device *dev)
-{
-	struct mpsc_shared_pdata	*pdata;
-	int				 rc = -ENODEV;
-
-	if (dev->id == 0) {
-		if (!(rc = mpsc_shared_map_regs(dev))) {
-			pdata = (struct mpsc_shared_pdata *)
-				dev->dev.platform_data;
-
-			mpsc_shared_regs.MPSC_MRR_m = pdata->mrr_val;
-			mpsc_shared_regs.MPSC_RCRR_m= pdata->rcrr_val;
-			mpsc_shared_regs.MPSC_TCRR_m= pdata->tcrr_val;
-			mpsc_shared_regs.SDMA_INTR_CAUSE_m =
-				pdata->intr_cause_val;
-			mpsc_shared_regs.SDMA_INTR_MASK_m =
-				pdata->intr_mask_val;
-
-			rc = 0;
-		}
-	}
-
-	return rc;
-}
-
-static int mpsc_shared_drv_remove(struct platform_device *dev)
-{
-	int	rc = -ENODEV;
-
-	if (dev->id == 0) {
-		mpsc_shared_unmap_regs();
-		mpsc_shared_regs.MPSC_MRR_m = 0;
-		mpsc_shared_regs.MPSC_RCRR_m = 0;
-		mpsc_shared_regs.MPSC_TCRR_m = 0;
-		mpsc_shared_regs.SDMA_INTR_CAUSE_m = 0;
-		mpsc_shared_regs.SDMA_INTR_MASK_m = 0;
-		rc = 0;
-	}
-
-	return rc;
-}
-
-static struct platform_driver mpsc_shared_driver = {
-	.probe	= mpsc_shared_drv_probe,
-	.remove	= mpsc_shared_drv_remove,
-	.driver	= {
-		.name	= MPSC_SHARED_NAME,
-	},
-};
-
-/*
- ******************************************************************************
- *
- * Driver Interface Routines
- *
- ******************************************************************************
- */
-static struct uart_driver mpsc_reg = {
-	.owner		= THIS_MODULE,
-	.driver_name	= MPSC_DRIVER_NAME,
-	.dev_name	= MPSC_DEV_NAME,
-	.major		= MPSC_MAJOR,
-	.minor		= MPSC_MINOR_START,
-	.nr		= MPSC_NUM_CTLRS,
-	.cons		= MPSC_CONSOLE,
-};
-
-static int mpsc_drv_map_regs(struct mpsc_port_info *pi,
-		struct platform_device *pd)
-{
-	struct resource	*r;
-
-	if ((r = platform_get_resource(pd, IORESOURCE_MEM, MPSC_BASE_ORDER))
-			&& request_mem_region(r->start, MPSC_REG_BLOCK_SIZE,
-			"mpsc_regs")) {
-		pi->mpsc_base = ioremap(r->start, MPSC_REG_BLOCK_SIZE);
-		pi->mpsc_base_p = r->start;
-	} else {
-		mpsc_resource_err("MPSC base");
-		goto err;
-	}
-
-	if ((r = platform_get_resource(pd, IORESOURCE_MEM,
-					MPSC_SDMA_BASE_ORDER))
-			&& request_mem_region(r->start,
-				MPSC_SDMA_REG_BLOCK_SIZE, "sdma_regs")) {
-		pi->sdma_base = ioremap(r->start,MPSC_SDMA_REG_BLOCK_SIZE);
-		pi->sdma_base_p = r->start;
-	} else {
-		mpsc_resource_err("SDMA base");
-		if (pi->mpsc_base) {
-			iounmap(pi->mpsc_base);
-			pi->mpsc_base = NULL;
-		}
-		goto err;
-	}
-
-	if ((r = platform_get_resource(pd,IORESOURCE_MEM,MPSC_BRG_BASE_ORDER))
-			&& request_mem_region(r->start,
-				MPSC_BRG_REG_BLOCK_SIZE, "brg_regs")) {
-		pi->brg_base = ioremap(r->start, MPSC_BRG_REG_BLOCK_SIZE);
-		pi->brg_base_p = r->start;
-	} else {
-		mpsc_resource_err("BRG base");
-		if (pi->mpsc_base) {
-			iounmap(pi->mpsc_base);
-			pi->mpsc_base = NULL;
-		}
-		if (pi->sdma_base) {
-			iounmap(pi->sdma_base);
-			pi->sdma_base = NULL;
-		}
-		goto err;
-	}
-	return 0;
-
-err:
-	return -ENOMEM;
-}
-
-static void mpsc_drv_unmap_regs(struct mpsc_port_info *pi)
-{
-	if (!pi->mpsc_base) {
-		iounmap(pi->mpsc_base);
-		release_mem_region(pi->mpsc_base_p, MPSC_REG_BLOCK_SIZE);
-	}
-	if (!pi->sdma_base) {
-		iounmap(pi->sdma_base);
-		release_mem_region(pi->sdma_base_p, MPSC_SDMA_REG_BLOCK_SIZE);
-	}
-	if (!pi->brg_base) {
-		iounmap(pi->brg_base);
-		release_mem_region(pi->brg_base_p, MPSC_BRG_REG_BLOCK_SIZE);
-	}
-
-	pi->mpsc_base = NULL;
-	pi->sdma_base = NULL;
-	pi->brg_base = NULL;
-
-	pi->mpsc_base_p = 0;
-	pi->sdma_base_p = 0;
-	pi->brg_base_p = 0;
-}
-
-static void mpsc_drv_get_platform_data(struct mpsc_port_info *pi,
-		struct platform_device *pd, int num)
-{
-	struct mpsc_pdata	*pdata;
-
-	pdata = (struct mpsc_pdata *)pd->dev.platform_data;
-
-	pi->port.uartclk = pdata->brg_clk_freq;
-	pi->port.iotype = UPIO_MEM;
-	pi->port.line = num;
-	pi->port.type = PORT_MPSC;
-	pi->port.fifosize = MPSC_TXBE_SIZE;
-	pi->port.membase = pi->mpsc_base;
-	pi->port.mapbase = (ulong)pi->mpsc_base;
-	pi->port.ops = &mpsc_pops;
-
-	pi->mirror_regs = pdata->mirror_regs;
-	pi->cache_mgmt = pdata->cache_mgmt;
-	pi->brg_can_tune = pdata->brg_can_tune;
-	pi->brg_clk_src = pdata->brg_clk_src;
-	pi->mpsc_max_idle = pdata->max_idle;
-	pi->default_baud = pdata->default_baud;
-	pi->default_bits = pdata->default_bits;
-	pi->default_parity = pdata->default_parity;
-	pi->default_flow = pdata->default_flow;
-
-	/* Initial values of mirrored regs */
-	pi->MPSC_CHR_1_m = pdata->chr_1_val;
-	pi->MPSC_CHR_2_m = pdata->chr_2_val;
-	pi->MPSC_CHR_10_m = pdata->chr_10_val;
-	pi->MPSC_MPCR_m = pdata->mpcr_val;
-	pi->BRG_BCR_m = pdata->bcr_val;
-
-	pi->shared_regs = &mpsc_shared_regs;
-
-	pi->port.irq = platform_get_irq(pd, 0);
-}
-
-static int mpsc_drv_probe(struct platform_device *dev)
-{
-	struct mpsc_port_info	*pi;
-	int			rc = -ENODEV;
-
-	pr_debug("mpsc_drv_probe: Adding MPSC %d\n", dev->id);
-
-	if (dev->id < MPSC_NUM_CTLRS) {
-		pi = &mpsc_ports[dev->id];
-
-		if (!(rc = mpsc_drv_map_regs(pi, dev))) {
-			mpsc_drv_get_platform_data(pi, dev, dev->id);
-			pi->port.dev = &dev->dev;
-
-			if (!(rc = mpsc_make_ready(pi))) {
-				spin_lock_init(&pi->tx_lock);
-				if (!(rc = uart_add_one_port(&mpsc_reg,
-								&pi->port))) {
-					rc = 0;
-				} else {
-					mpsc_release_port((struct uart_port *)
-							pi);
-					mpsc_drv_unmap_regs(pi);
-				}
-			} else {
-				mpsc_drv_unmap_regs(pi);
-			}
-		}
-	}
-
-	return rc;
-}
-
-static int mpsc_drv_remove(struct platform_device *dev)
-{
-	pr_debug("mpsc_drv_exit: Removing MPSC %d\n", dev->id);
-
-	if (dev->id < MPSC_NUM_CTLRS) {
-		uart_remove_one_port(&mpsc_reg, &mpsc_ports[dev->id].port);
-		mpsc_release_port((struct uart_port *)
-				&mpsc_ports[dev->id].port);
-		mpsc_drv_unmap_regs(&mpsc_ports[dev->id]);
-		return 0;
-	} else {
-		return -ENODEV;
-	}
-}
-
-static struct platform_driver mpsc_driver = {
-	.probe	= mpsc_drv_probe,
-	.remove	= mpsc_drv_remove,
-	.driver	= {
-		.name	= MPSC_CTLR_NAME,
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init mpsc_drv_init(void)
-{
-	int	rc;
-
-	printk(KERN_INFO "Serial: MPSC driver\n");
-
-	memset(mpsc_ports, 0, sizeof(mpsc_ports));
-	memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs));
-
-	if (!(rc = uart_register_driver(&mpsc_reg))) {
-		if (!(rc = platform_driver_register(&mpsc_shared_driver))) {
-			if ((rc = platform_driver_register(&mpsc_driver))) {
-				platform_driver_unregister(&mpsc_shared_driver);
-				uart_unregister_driver(&mpsc_reg);
-			}
-		} else {
-			uart_unregister_driver(&mpsc_reg);
-		}
-	}
-
-	return rc;
-}
-
-static void __exit mpsc_drv_exit(void)
-{
-	platform_driver_unregister(&mpsc_driver);
-	platform_driver_unregister(&mpsc_shared_driver);
-	uart_unregister_driver(&mpsc_reg);
-	memset(mpsc_ports, 0, sizeof(mpsc_ports));
-	memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs));
-}
-
-module_init(mpsc_drv_init);
-module_exit(mpsc_drv_exit);
-
-MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>");
-MODULE_DESCRIPTION("Generic Marvell MPSC serial/UART driver");
-MODULE_VERSION(MPSC_VERSION);
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_CHARDEV_MAJOR(MPSC_MAJOR);
-MODULE_ALIAS("platform:" MPSC_CTLR_NAME);