tty: move drivers/serial/ to drivers/tty/serial/

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 633 deletions

diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
deleted file mode 100644
index 9711e06a8374..000000000000
--- a/drivers/serial/mux.c
+++ /dev/null
@@ -1,633 +0,0 @@
-/*
-** mux.c:
-**	serial driver for the Mux console found in some PA-RISC servers.
-**
-**	(c) Copyright 2002 Ryan Bradetich
-**	(c) Copyright 2002 Hewlett-Packard Company
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** This Driver currently only supports the console (port 0) on the MUX.
-** Additional work will be needed on this driver to enable the full
-** functionality of the MUX.
-**
-*/
-
-#include <linux/module.h>
-#include <linux/tty.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/console.h>
-#include <linux/delay.h> /* for udelay */
-#include <linux/device.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/parisc-device.h>
-
-#ifdef CONFIG_MAGIC_SYSRQ
-#include <linux/sysrq.h>
-#define SUPPORT_SYSRQ
-#endif
-
-#include <linux/serial_core.h>
-
-#define MUX_OFFSET 0x800
-#define MUX_LINE_OFFSET 0x80
-
-#define MUX_FIFO_SIZE 255
-#define MUX_POLL_DELAY (30 * HZ / 1000)
-
-#define IO_DATA_REG_OFFSET 0x3c
-#define IO_DCOUNT_REG_OFFSET 0x40
-
-#define MUX_EOFIFO(status) ((status & 0xF000) == 0xF000)
-#define MUX_STATUS(status) ((status & 0xF000) == 0x8000)
-#define MUX_BREAK(status) ((status & 0xF000) == 0x2000)
-
-#define MUX_NR 256
-static unsigned int port_cnt __read_mostly;
-struct mux_port {
-	struct uart_port port;
-	int enabled;
-};
-static struct mux_port mux_ports[MUX_NR];
-
-static struct uart_driver mux_driver = {
-	.owner = THIS_MODULE,
-	.driver_name = "ttyB",
-	.dev_name = "ttyB",
-	.major = MUX_MAJOR,
-	.minor = 0,
-	.nr = MUX_NR,
-};
-
-static struct timer_list mux_timer;
-
-#define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + IO_DATA_REG_OFFSET)
-#define UART_GET_FIFO_CNT(p) __raw_readl((p)->membase + IO_DCOUNT_REG_OFFSET)
-
-/**
- * get_mux_port_count - Get the number of available ports on the Mux.
- * @dev: The parisc device.
- *
- * This function is used to determine the number of ports the Mux
- * supports.  The IODC data reports the number of ports the Mux
- * can support, but there are cases where not all the Mux ports
- * are connected.  This function can override the IODC and
- * return the true port count.
- */
-static int __init get_mux_port_count(struct parisc_device *dev)
-{
-	int status;
-	u8 iodc_data[32];
-	unsigned long bytecnt;
-
-	/* If this is the built-in Mux for the K-Class (Eole CAP/MUX),
-	 * we only need to allocate resources for 1 port since the
-	 * other 7 ports are not connected.
-	 */
-	if(dev->id.hversion == 0x15)
-		return 1;
-
-	status = pdc_iodc_read(&bytecnt, dev->hpa.start, 0, iodc_data, 32);
-	BUG_ON(status != PDC_OK);
-
-	/* Return the number of ports specified in the iodc data. */
-	return ((((iodc_data)[4] & 0xf0) >> 4) * 8) + 8;
-}
-
-/**
- * mux_tx_empty - Check if the transmitter fifo is empty.
- * @port: Ptr to the uart_port.
- *
- * This function test if the transmitter fifo for the port
- * described by 'port' is empty.  If it is empty, this function
- * should return TIOCSER_TEMT, otherwise return 0.
- */
-static unsigned int mux_tx_empty(struct uart_port *port)
-{
-	return UART_GET_FIFO_CNT(port) ? 0 : TIOCSER_TEMT;
-} 
-
-/**
- * mux_set_mctrl - Set the current state of the modem control inputs.
- * @ports: Ptr to the uart_port.
- * @mctrl: Modem control bits.
- *
- * The Serial MUX does not support CTS, DCD or DSR so this function
- * is ignored.
- */
-static void mux_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-}
-
-/**
- * mux_get_mctrl - Returns the current state of modem control inputs.
- * @port: Ptr to the uart_port.
- *
- * The Serial MUX does not support CTS, DCD or DSR so these lines are
- * treated as permanently active.
- */
-static unsigned int mux_get_mctrl(struct uart_port *port)
-{ 
-	return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
-}
-
-/**
- * mux_stop_tx - Stop transmitting characters.
- * @port: Ptr to the uart_port.
- *
- * The Serial MUX does not support this function.
- */
-static void mux_stop_tx(struct uart_port *port)
-{
-}
-
-/**
- * mux_start_tx - Start transmitting characters.
- * @port: Ptr to the uart_port.
- *
- * The Serial Mux does not support this function.
- */
-static void mux_start_tx(struct uart_port *port)
-{
-}
-
-/**
- * mux_stop_rx - Stop receiving characters.
- * @port: Ptr to the uart_port.
- *
- * The Serial Mux does not support this function.
- */
-static void mux_stop_rx(struct uart_port *port)
-{
-}
-
-/**
- * mux_enable_ms - Enable modum status interrupts.
- * @port: Ptr to the uart_port.
- *
- * The Serial Mux does not support this function.
- */
-static void mux_enable_ms(struct uart_port *port)
-{
-}
-
-/**
- * mux_break_ctl - Control the transmitssion of a break signal.
- * @port: Ptr to the uart_port.
- * @break_state: Raise/Lower the break signal.
- *
- * The Serial Mux does not support this function.
- */
-static void mux_break_ctl(struct uart_port *port, int break_state)
-{
-}
-
-/**
- * mux_write - Write chars to the mux fifo.
- * @port: Ptr to the uart_port.
- *
- * This function writes all the data from the uart buffer to
- * the mux fifo.
- */
-static void mux_write(struct uart_port *port)
-{
-	int count;
-	struct circ_buf *xmit = &port->state->xmit;
-
-	if(port->x_char) {
-		UART_PUT_CHAR(port, port->x_char);
-		port->icount.tx++;
-		port->x_char = 0;
-		return;
-	}
-
-	if(uart_circ_empty(xmit) || uart_tx_stopped(port)) {
-		mux_stop_tx(port);
-		return;
-	}
-
-	count = (port->fifosize) - UART_GET_FIFO_CNT(port);
-	do {
-		UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		port->icount.tx++;
-		if(uart_circ_empty(xmit))
-			break;
-
-	} while(--count > 0);
-
-	while(UART_GET_FIFO_CNT(port)) 
-		udelay(1);
-
-	if(uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-		uart_write_wakeup(port);
-
-	if (uart_circ_empty(xmit))
-		mux_stop_tx(port);
-}
-
-/**
- * mux_read - Read chars from the mux fifo.
- * @port: Ptr to the uart_port.
- *
- * This reads all available data from the mux's fifo and pushes
- * the data to the tty layer.
- */
-static void mux_read(struct uart_port *port)
-{
-	int data;
-	struct tty_struct *tty = port->state->port.tty;
-	__u32 start_count = port->icount.rx;
-
-	while(1) {
-		data = __raw_readl(port->membase + IO_DATA_REG_OFFSET);
-
-		if (MUX_STATUS(data))
-			continue;
-
-		if (MUX_EOFIFO(data))
-			break;
-
-		port->icount.rx++;
-
-		if (MUX_BREAK(data)) {
-			port->icount.brk++;
-			if(uart_handle_break(port))
-				continue;
-		}
-
-		if (uart_handle_sysrq_char(port, data & 0xffu))
-			continue;
-
-		tty_insert_flip_char(tty, data & 0xFF, TTY_NORMAL);
-	}
-	
-	if (start_count != port->icount.rx) {
-		tty_flip_buffer_push(tty);
-	}
-}
-
-/**
- * mux_startup - Initialize the port.
- * @port: Ptr to the uart_port.
- *
- * Grab any resources needed for this port and start the
- * mux timer.
- */
-static int mux_startup(struct uart_port *port)
-{
-	mux_ports[port->line].enabled = 1;
-	return 0;
-}
-
-/**
- * mux_shutdown - Disable the port.
- * @port: Ptr to the uart_port.
- *
- * Release any resources needed for the port.
- */
-static void mux_shutdown(struct uart_port *port)
-{
-	mux_ports[port->line].enabled = 0;
-}
-
-/**
- * mux_set_termios - Chane port parameters.
- * @port: Ptr to the uart_port.
- * @termios: new termios settings.
- * @old: old termios settings.
- *
- * The Serial Mux does not support this function.
- */
-static void
-mux_set_termios(struct uart_port *port, struct ktermios *termios,
-	        struct ktermios *old)
-{
-}
-
-/**
- * mux_type - Describe the port.
- * @port: Ptr to the uart_port.
- *
- * Return a pointer to a string constant describing the
- * specified port.
- */
-static const char *mux_type(struct uart_port *port)
-{
-	return "Mux";
-}
-
-/**
- * mux_release_port - Release memory and IO regions.
- * @port: Ptr to the uart_port.
- * 
- * Release any memory and IO region resources currently in use by
- * the port.
- */
-static void mux_release_port(struct uart_port *port)
-{
-}
-
-/**
- * mux_request_port - Request memory and IO regions.
- * @port: Ptr to the uart_port.
- *
- * Request any memory and IO region resources required by the port.
- * If any fail, no resources should be registered when this function
- * returns, and it should return -EBUSY on failure.
- */
-static int mux_request_port(struct uart_port *port)
-{
-	return 0;
-}
-
-/**
- * mux_config_port - Perform port autoconfiguration.
- * @port: Ptr to the uart_port.
- * @type: Bitmask of required configurations.
- *
- * Perform any autoconfiguration steps for the port.  This function is
- * called if the UPF_BOOT_AUTOCONF flag is specified for the port.
- * [Note: This is required for now because of a bug in the Serial core.
- *  rmk has already submitted a patch to linus, should be available for
- *  2.5.47.]
- */
-static void mux_config_port(struct uart_port *port, int type)
-{
-	port->type = PORT_MUX;
-}
-
-/**
- * mux_verify_port - Verify the port information.
- * @port: Ptr to the uart_port.
- * @ser: Ptr to the serial information.
- *
- * Verify the new serial port information contained within serinfo is
- * suitable for this port type.
- */
-static int mux_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
-	if(port->membase == NULL)
-		return -EINVAL;
-
-	return 0;
-}
-
-/**
- * mux_drv_poll - Mux poll function.
- * @unused: Unused variable
- *
- * This function periodically polls the Serial MUX to check for new data.
- */
-static void mux_poll(unsigned long unused)
-{  
-	int i;
-
-	for(i = 0; i < port_cnt; ++i) {
-		if(!mux_ports[i].enabled)
-			continue;
-
-		mux_read(&mux_ports[i].port);
-		mux_write(&mux_ports[i].port);
-	}
-
-	mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY);
-}
-
-
-#ifdef CONFIG_SERIAL_MUX_CONSOLE
-static void mux_console_write(struct console *co, const char *s, unsigned count)
-{
-	/* Wait until the FIFO drains. */
-	while(UART_GET_FIFO_CNT(&mux_ports[0].port))
-		udelay(1);
-
-	while(count--) {
-		if(*s == '\n') {
-			UART_PUT_CHAR(&mux_ports[0].port, '\r');
-		}
-		UART_PUT_CHAR(&mux_ports[0].port, *s++);
-	}
-
-}
-
-static int mux_console_setup(struct console *co, char *options)
-{
-        return 0;
-}
-
-struct tty_driver *mux_console_device(struct console *co, int *index)
-{
-        *index = co->index;
-	return mux_driver.tty_driver;
-}
-
-static struct console mux_console = {
-	.name =		"ttyB",
-	.write =	mux_console_write,
-	.device =	mux_console_device,
-	.setup =	mux_console_setup,
-	.flags =	CON_ENABLED | CON_PRINTBUFFER,
-	.index =	0,
-};
-
-#define MUX_CONSOLE	&mux_console
-#else
-#define MUX_CONSOLE	NULL
-#endif
-
-static struct uart_ops mux_pops = {
-	.tx_empty =		mux_tx_empty,
-	.set_mctrl =		mux_set_mctrl,
-	.get_mctrl =		mux_get_mctrl,
-	.stop_tx =		mux_stop_tx,
-	.start_tx =		mux_start_tx,
-	.stop_rx =		mux_stop_rx,
-	.enable_ms =		mux_enable_ms,
-	.break_ctl =		mux_break_ctl,
-	.startup =		mux_startup,
-	.shutdown =		mux_shutdown,
-	.set_termios =		mux_set_termios,
-	.type =			mux_type,
-	.release_port =		mux_release_port,
-	.request_port =		mux_request_port,
-	.config_port =		mux_config_port,
-	.verify_port =		mux_verify_port,
-};
-
-/**
- * mux_probe - Determine if the Serial Mux should claim this device.
- * @dev: The parisc device.
- *
- * Deterimine if the Serial Mux should claim this chip (return 0)
- * or not (return 1).
- */
-static int __init mux_probe(struct parisc_device *dev)
-{
-	int i, status;
-
-	int port_count = get_mux_port_count(dev);
-	printk(KERN_INFO "Serial mux driver (%d ports) Revision: 0.6\n", port_count);
-
-	dev_set_drvdata(&dev->dev, (void *)(long)port_count);
-	request_mem_region(dev->hpa.start + MUX_OFFSET,
-                           port_count * MUX_LINE_OFFSET, "Mux");
-
-	if(!port_cnt) {
-		mux_driver.cons = MUX_CONSOLE;
-
-		status = uart_register_driver(&mux_driver);
-		if(status) {
-			printk(KERN_ERR "Serial mux: Unable to register driver.\n");
-			return 1;
-		}
-	}
-
-	for(i = 0; i < port_count; ++i, ++port_cnt) {
-		struct uart_port *port = &mux_ports[port_cnt].port;
-		port->iobase	= 0;
-		port->mapbase	= dev->hpa.start + MUX_OFFSET +
-						(i * MUX_LINE_OFFSET);
-		port->membase	= ioremap_nocache(port->mapbase, MUX_LINE_OFFSET);
-		port->iotype	= UPIO_MEM;
-		port->type	= PORT_MUX;
-		port->irq	= NO_IRQ;
-		port->uartclk	= 0;
-		port->fifosize	= MUX_FIFO_SIZE;
-		port->ops	= &mux_pops;
-		port->flags	= UPF_BOOT_AUTOCONF;
-		port->line	= port_cnt;
-
-		/* The port->timeout needs to match what is present in
-		 * uart_wait_until_sent in serial_core.c.  Otherwise
-		 * the time spent in msleep_interruptable will be very
-		 * long, causing the appearance of a console hang.
-		 */
-		port->timeout   = HZ / 50;
-		spin_lock_init(&port->lock);
-
-		status = uart_add_one_port(&mux_driver, port);
-		BUG_ON(status);
-	}
-
-	return 0;
-}
-
-static int __devexit mux_remove(struct parisc_device *dev)
-{
-	int i, j;
-	int port_count = (long)dev_get_drvdata(&dev->dev);
-
-	/* Find Port 0 for this card in the mux_ports list. */
-	for(i = 0; i < port_cnt; ++i) {
-		if(mux_ports[i].port.mapbase == dev->hpa.start + MUX_OFFSET)
-			break;
-	}
-	BUG_ON(i + port_count > port_cnt);
-
-	/* Release the resources associated with each port on the device. */
-	for(j = 0; j < port_count; ++j, ++i) {
-		struct uart_port *port = &mux_ports[i].port;
-
-		uart_remove_one_port(&mux_driver, port);
-		if(port->membase)
-			iounmap(port->membase);
-	}
-
-	release_mem_region(dev->hpa.start + MUX_OFFSET, port_count * MUX_LINE_OFFSET);
-	return 0;
-}
-
-/* Hack.  This idea was taken from the 8250_gsc.c on how to properly order
- * the serial port detection in the proper order.   The idea is we always
- * want the builtin mux to be detected before addin mux cards, so we
- * specifically probe for the builtin mux cards first.
- *
- * This table only contains the parisc_device_id of known builtin mux
- * devices.  All other mux cards will be detected by the generic mux_tbl.
- */
-static struct parisc_device_id builtin_mux_tbl[] = {
-	{ HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x15, 0x0000D }, /* All K-class */
-	{ HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x44, 0x0000D }, /* E35, E45, and E55 */
-	{ 0, }
-};
-
-static struct parisc_device_id mux_tbl[] = {
-	{ HPHW_A_DIRECT, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0000D },
-	{ 0, }
-};
-
-MODULE_DEVICE_TABLE(parisc, builtin_mux_tbl);
-MODULE_DEVICE_TABLE(parisc, mux_tbl);
-
-static struct parisc_driver builtin_serial_mux_driver = {
-	.name =		"builtin_serial_mux",
-	.id_table =	builtin_mux_tbl,
-	.probe =	mux_probe,
-	.remove =       __devexit_p(mux_remove),
-};
-
-static struct parisc_driver serial_mux_driver = {
-	.name =		"serial_mux",
-	.id_table =	mux_tbl,
-	.probe =	mux_probe,
-	.remove =       __devexit_p(mux_remove),
-};
-
-/**
- * mux_init - Serial MUX initialization procedure.
- *
- * Register the Serial MUX driver.
- */
-static int __init mux_init(void)
-{
-	register_parisc_driver(&builtin_serial_mux_driver);
-	register_parisc_driver(&serial_mux_driver);
-
-	if(port_cnt > 0) {
-		/* Start the Mux timer */
-		init_timer(&mux_timer);
-		mux_timer.function = mux_poll;
-		mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY);
-
-#ifdef CONFIG_SERIAL_MUX_CONSOLE
-	        register_console(&mux_console);
-#endif
-	}
-
-	return 0;
-}
-
-/**
- * mux_exit - Serial MUX cleanup procedure.
- *
- * Unregister the Serial MUX driver from the tty layer.
- */
-static void __exit mux_exit(void)
-{
-	/* Delete the Mux timer. */
-	if(port_cnt > 0) {
-		del_timer(&mux_timer);
-#ifdef CONFIG_SERIAL_MUX_CONSOLE
-		unregister_console(&mux_console);
-#endif
-	}
-
-	unregister_parisc_driver(&builtin_serial_mux_driver);
-	unregister_parisc_driver(&serial_mux_driver);
-	uart_unregister_driver(&mux_driver);
-}
-
-module_init(mux_init);
-module_exit(mux_exit);
-
-MODULE_AUTHOR("Ryan Bradetich");
-MODULE_DESCRIPTION("Serial MUX driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_CHARDEV_MAJOR(MUX_MAJOR);