tty: move drivers/serial/ to drivers/tty/serial/

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 531 deletions

diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c
deleted file mode 100644
index 1f36b7eb7351..000000000000
--- a/drivers/serial/timbuart.c
+++ /dev/null
@@ -1,531 +0,0 @@
-/*
- * timbuart.c timberdale FPGA UART driver
- * Copyright (c) 2009 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/* Supports:
- * Timberdale FPGA UART
- */
-
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/serial_core.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-
-#include "timbuart.h"
-
-struct timbuart_port {
-	struct uart_port	port;
-	struct tasklet_struct	tasklet;
-	int			usedma;
-	u32			last_ier;
-	struct platform_device  *dev;
-};
-
-static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800,
-	921600, 1843200, 3250000};
-
-static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier);
-
-static irqreturn_t timbuart_handleinterrupt(int irq, void *devid);
-
-static void timbuart_stop_rx(struct uart_port *port)
-{
-	/* spin lock held by upper layer, disable all RX interrupts */
-	u32 ier = ioread32(port->membase + TIMBUART_IER) & ~RXFLAGS;
-	iowrite32(ier, port->membase + TIMBUART_IER);
-}
-
-static void timbuart_stop_tx(struct uart_port *port)
-{
-	/* spinlock held by upper layer, disable TX interrupt */
-	u32 ier = ioread32(port->membase + TIMBUART_IER) & ~TXBAE;
-	iowrite32(ier, port->membase + TIMBUART_IER);
-}
-
-static void timbuart_start_tx(struct uart_port *port)
-{
-	struct timbuart_port *uart =
-		container_of(port, struct timbuart_port, port);
-
-	/* do not transfer anything here -> fire off the tasklet */
-	tasklet_schedule(&uart->tasklet);
-}
-
-static unsigned int timbuart_tx_empty(struct uart_port *port)
-{
-	u32 isr = ioread32(port->membase + TIMBUART_ISR);
-
-	return (isr & TXBE) ? TIOCSER_TEMT : 0;
-}
-
-static void timbuart_flush_buffer(struct uart_port *port)
-{
-	if (!timbuart_tx_empty(port)) {
-		u8 ctl = ioread8(port->membase + TIMBUART_CTRL) |
-			TIMBUART_CTRL_FLSHTX;
-
-		iowrite8(ctl, port->membase + TIMBUART_CTRL);
-		iowrite32(TXBF, port->membase + TIMBUART_ISR);
-	}
-}
-
-static void timbuart_rx_chars(struct uart_port *port)
-{
-	struct tty_struct *tty = port->state->port.tty;
-
-	while (ioread32(port->membase + TIMBUART_ISR) & RXDP) {
-		u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
-		port->icount.rx++;
-		tty_insert_flip_char(tty, ch, TTY_NORMAL);
-	}
-
-	spin_unlock(&port->lock);
-	tty_flip_buffer_push(port->state->port.tty);
-	spin_lock(&port->lock);
-
-	dev_dbg(port->dev, "%s - total read %d bytes\n",
-		__func__, port->icount.rx);
-}
-
-static void timbuart_tx_chars(struct uart_port *port)
-{
-	struct circ_buf *xmit = &port->state->xmit;
-
-	while (!(ioread32(port->membase + TIMBUART_ISR) & TXBF) &&
-		!uart_circ_empty(xmit)) {
-		iowrite8(xmit->buf[xmit->tail],
-			port->membase + TIMBUART_TXFIFO);
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		port->icount.tx++;
-	}
-
-	dev_dbg(port->dev,
-		"%s - total written %d bytes, CTL: %x, RTS: %x, baud: %x\n",
-		 __func__,
-		port->icount.tx,
-		ioread8(port->membase + TIMBUART_CTRL),
-		port->mctrl & TIOCM_RTS,
-		ioread8(port->membase + TIMBUART_BAUDRATE));
-}
-
-static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier)
-{
-	struct timbuart_port *uart =
-		container_of(port, struct timbuart_port, port);
-	struct circ_buf *xmit = &port->state->xmit;
-
-	if (uart_circ_empty(xmit) || uart_tx_stopped(port))
-		return;
-
-	if (port->x_char)
-		return;
-
-	if (isr & TXFLAGS) {
-		timbuart_tx_chars(port);
-		/* clear all TX interrupts */
-		iowrite32(TXFLAGS, port->membase + TIMBUART_ISR);
-
-		if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-			uart_write_wakeup(port);
-	} else
-		/* Re-enable any tx interrupt */
-		*ier |= uart->last_ier & TXFLAGS;
-
-	/* enable interrupts if there are chars in the transmit buffer,
-	 * Or if we delivered some bytes and want the almost empty interrupt
-	 * we wake up the upper layer later when we got the interrupt
-	 * to give it some time to go out...
-	 */
-	if (!uart_circ_empty(xmit))
-		*ier |= TXBAE;
-
-	dev_dbg(port->dev, "%s - leaving\n", __func__);
-}
-
-void timbuart_handle_rx_port(struct uart_port *port, u32 isr, u32 *ier)
-{
-	if (isr & RXFLAGS) {
-		/* Some RX status is set */
-		if (isr & RXBF) {
-			u8 ctl = ioread8(port->membase + TIMBUART_CTRL) |
-				TIMBUART_CTRL_FLSHRX;
-			iowrite8(ctl, port->membase + TIMBUART_CTRL);
-			port->icount.overrun++;
-		} else if (isr & (RXDP))
-			timbuart_rx_chars(port);
-
-		/* ack all RX interrupts */
-		iowrite32(RXFLAGS, port->membase + TIMBUART_ISR);
-	}
-
-	/* always have the RX interrupts enabled */
-	*ier |= RXBAF | RXBF | RXTT;
-
-	dev_dbg(port->dev, "%s - leaving\n", __func__);
-}
-
-void timbuart_tasklet(unsigned long arg)
-{
-	struct timbuart_port *uart = (struct timbuart_port *)arg;
-	u32 isr, ier = 0;
-
-	spin_lock(&uart->port.lock);
-
-	isr = ioread32(uart->port.membase + TIMBUART_ISR);
-	dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr);
-
-	if (!uart->usedma)
-		timbuart_handle_tx_port(&uart->port, isr, &ier);
-
-	timbuart_mctrl_check(&uart->port, isr, &ier);
-
-	if (!uart->usedma)
-		timbuart_handle_rx_port(&uart->port, isr, &ier);
-
-	iowrite32(ier, uart->port.membase + TIMBUART_IER);
-
-	spin_unlock(&uart->port.lock);
-	dev_dbg(uart->port.dev, "%s leaving\n", __func__);
-}
-
-static unsigned int timbuart_get_mctrl(struct uart_port *port)
-{
-	u8 cts = ioread8(port->membase + TIMBUART_CTRL);
-	dev_dbg(port->dev, "%s - cts %x\n", __func__, cts);
-
-	if (cts & TIMBUART_CTRL_CTS)
-		return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
-	else
-		return TIOCM_DSR | TIOCM_CAR;
-}
-
-static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-	dev_dbg(port->dev, "%s - %x\n", __func__, mctrl);
-
-	if (mctrl & TIOCM_RTS)
-		iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
-	else
-		iowrite8(0, port->membase + TIMBUART_CTRL);
-}
-
-static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier)
-{
-	unsigned int cts;
-
-	if (isr & CTS_DELTA) {
-		/* ack */
-		iowrite32(CTS_DELTA, port->membase + TIMBUART_ISR);
-		cts = timbuart_get_mctrl(port);
-		uart_handle_cts_change(port, cts & TIOCM_CTS);
-		wake_up_interruptible(&port->state->port.delta_msr_wait);
-	}
-
-	*ier |= CTS_DELTA;
-}
-
-static void timbuart_enable_ms(struct uart_port *port)
-{
-	/* N/A */
-}
-
-static void timbuart_break_ctl(struct uart_port *port, int ctl)
-{
-	/* N/A */
-}
-
-static int timbuart_startup(struct uart_port *port)
-{
-	struct timbuart_port *uart =
-		container_of(port, struct timbuart_port, port);
-
-	dev_dbg(port->dev, "%s\n", __func__);
-
-	iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL);
-	iowrite32(0x1ff, port->membase + TIMBUART_ISR);
-	/* Enable all but TX interrupts */
-	iowrite32(RXBAF | RXBF | RXTT | CTS_DELTA,
-		port->membase + TIMBUART_IER);
-
-	return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED,
-		"timb-uart", uart);
-}
-
-static void timbuart_shutdown(struct uart_port *port)
-{
-	struct timbuart_port *uart =
-		container_of(port, struct timbuart_port, port);
-	dev_dbg(port->dev, "%s\n", __func__);
-	free_irq(port->irq, uart);
-	iowrite32(0, port->membase + TIMBUART_IER);
-}
-
-static int get_bindex(int baud)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(baudrates); i++)
-		if (baud <= baudrates[i])
-			return i;
-
-	return -1;
-}
-
-static void timbuart_set_termios(struct uart_port *port,
-	struct ktermios *termios,
-	struct ktermios *old)
-{
-	unsigned int baud;
-	short bindex;
-	unsigned long flags;
-
-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
-	bindex = get_bindex(baud);
-	dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex);
-
-	if (bindex < 0)
-		bindex = 0;
-	baud = baudrates[bindex];
-
-	/* The serial layer calls into this once with old = NULL when setting
-	   up initially */
-	if (old)
-		tty_termios_copy_hw(termios, old);
-	tty_termios_encode_baud_rate(termios, baud, baud);
-
-	spin_lock_irqsave(&port->lock, flags);
-	iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE);
-	uart_update_timeout(port, termios->c_cflag, baud);
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static const char *timbuart_type(struct uart_port *port)
-{
-	return port->type == PORT_UNKNOWN ? "timbuart" : NULL;
-}
-
-/* We do not request/release mappings of the registers here,
- * currently it's done in the proble function.
- */
-static void timbuart_release_port(struct uart_port *port)
-{
-	struct platform_device *pdev = to_platform_device(port->dev);
-	int size =
-		resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
-
-	if (port->flags & UPF_IOREMAP) {
-		iounmap(port->membase);
-		port->membase = NULL;
-	}
-
-	release_mem_region(port->mapbase, size);
-}
-
-static int timbuart_request_port(struct uart_port *port)
-{
-	struct platform_device *pdev = to_platform_device(port->dev);
-	int size =
-		resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
-
-	if (!request_mem_region(port->mapbase, size, "timb-uart"))
-		return -EBUSY;
-
-	if (port->flags & UPF_IOREMAP) {
-		port->membase = ioremap(port->mapbase, size);
-		if (port->membase == NULL) {
-			release_mem_region(port->mapbase, size);
-			return -ENOMEM;
-		}
-	}
-
-	return 0;
-}
-
-static irqreturn_t timbuart_handleinterrupt(int irq, void *devid)
-{
-	struct timbuart_port *uart = (struct timbuart_port *)devid;
-
-	if (ioread8(uart->port.membase + TIMBUART_IPR)) {
-		uart->last_ier = ioread32(uart->port.membase + TIMBUART_IER);
-
-		/* disable interrupts, the tasklet enables them again */
-		iowrite32(0, uart->port.membase + TIMBUART_IER);
-
-		/* fire off bottom half */
-		tasklet_schedule(&uart->tasklet);
-
-		return IRQ_HANDLED;
-	} else
-		return IRQ_NONE;
-}
-
-/*
- * Configure/autoconfigure the port.
- */
-static void timbuart_config_port(struct uart_port *port, int flags)
-{
-	if (flags & UART_CONFIG_TYPE) {
-		port->type = PORT_TIMBUART;
-		timbuart_request_port(port);
-	}
-}
-
-static int timbuart_verify_port(struct uart_port *port,
-	struct serial_struct *ser)
-{
-	/* we don't want the core code to modify any port params */
-	return -EINVAL;
-}
-
-static struct uart_ops timbuart_ops = {
-	.tx_empty = timbuart_tx_empty,
-	.set_mctrl = timbuart_set_mctrl,
-	.get_mctrl = timbuart_get_mctrl,
-	.stop_tx = timbuart_stop_tx,
-	.start_tx = timbuart_start_tx,
-	.flush_buffer = timbuart_flush_buffer,
-	.stop_rx = timbuart_stop_rx,
-	.enable_ms = timbuart_enable_ms,
-	.break_ctl = timbuart_break_ctl,
-	.startup = timbuart_startup,
-	.shutdown = timbuart_shutdown,
-	.set_termios = timbuart_set_termios,
-	.type = timbuart_type,
-	.release_port = timbuart_release_port,
-	.request_port = timbuart_request_port,
-	.config_port = timbuart_config_port,
-	.verify_port = timbuart_verify_port
-};
-
-static struct uart_driver timbuart_driver = {
-	.owner = THIS_MODULE,
-	.driver_name = "timberdale_uart",
-	.dev_name = "ttyTU",
-	.major = TIMBUART_MAJOR,
-	.minor = TIMBUART_MINOR,
-	.nr = 1
-};
-
-static int __devinit timbuart_probe(struct platform_device *dev)
-{
-	int err, irq;
-	struct timbuart_port *uart;
-	struct resource *iomem;
-
-	dev_dbg(&dev->dev, "%s\n", __func__);
-
-	uart = kzalloc(sizeof(*uart), GFP_KERNEL);
-	if (!uart) {
-		err = -EINVAL;
-		goto err_mem;
-	}
-
-	uart->usedma = 0;
-
-	uart->port.uartclk = 3250000 * 16;
-	uart->port.fifosize  = TIMBUART_FIFO_SIZE;
-	uart->port.regshift  = 2;
-	uart->port.iotype  = UPIO_MEM;
-	uart->port.ops = &timbuart_ops;
-	uart->port.irq = 0;
-	uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
-	uart->port.line  = 0;
-	uart->port.dev	= &dev->dev;
-
-	iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	if (!iomem) {
-		err = -ENOMEM;
-		goto err_register;
-	}
-	uart->port.mapbase = iomem->start;
-	uart->port.membase = NULL;
-
-	irq = platform_get_irq(dev, 0);
-	if (irq < 0) {
-		err = -EINVAL;
-		goto err_register;
-	}
-	uart->port.irq = irq;
-
-	tasklet_init(&uart->tasklet, timbuart_tasklet, (unsigned long)uart);
-
-	err = uart_register_driver(&timbuart_driver);
-	if (err)
-		goto err_register;
-
-	err = uart_add_one_port(&timbuart_driver, &uart->port);
-	if (err)
-		goto err_add_port;
-
-	platform_set_drvdata(dev, uart);
-
-	return 0;
-
-err_add_port:
-	uart_unregister_driver(&timbuart_driver);
-err_register:
-	kfree(uart);
-err_mem:
-	printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n",
-		err);
-
-	return err;
-}
-
-static int __devexit timbuart_remove(struct platform_device *dev)
-{
-	struct timbuart_port *uart = platform_get_drvdata(dev);
-
-	tasklet_kill(&uart->tasklet);
-	uart_remove_one_port(&timbuart_driver, &uart->port);
-	uart_unregister_driver(&timbuart_driver);
-	kfree(uart);
-
-	return 0;
-}
-
-static struct platform_driver timbuart_platform_driver = {
-	.driver = {
-		.name	= "timb-uart",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= timbuart_probe,
-	.remove		= __devexit_p(timbuart_remove),
-};
-
-/*--------------------------------------------------------------------------*/
-
-static int __init timbuart_init(void)
-{
-	return platform_driver_register(&timbuart_platform_driver);
-}
-
-static void __exit timbuart_exit(void)
-{
-	platform_driver_unregister(&timbuart_platform_driver);
-}
-
-module_init(timbuart_init);
-module_exit(timbuart_exit);
-
-MODULE_DESCRIPTION("Timberdale UART driver");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:timb-uart");
-