Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

Conflicts:
	drivers/net/pcmcia/fmvj18x_cs.c
	drivers/net/pcmcia/nmclan_cs.c
	drivers/net/pcmcia/xirc2ps_cs.c
	drivers/net/wireless/ray_cs.c

1 files changed, 41 insertions, 102 deletions

diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 7c7914f5fa02..fc413f0f8dd2 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -54,14 +54,6 @@
 
 #include "8250.h"
 
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0644);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
 
 /*====================================================================*/
 
@@ -121,24 +113,20 @@ static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_
 static int quirk_post_ibm(struct pcmcia_device *link)
 {
 	conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
-	int last_ret, last_fn;
+	int ret;
+
+	ret = pcmcia_access_configuration_register(link, &reg);
+	if (ret)
+		goto failed;
 
-	last_ret = pcmcia_access_configuration_register(link, &reg);
-	if (last_ret) {
-		last_fn = AccessConfigurationRegister;
-		goto cs_failed;
-	}
 	reg.Action = CS_WRITE;
 	reg.Value = reg.Value | 1;
-	last_ret = pcmcia_access_configuration_register(link, &reg);
-	if (last_ret) {
-		last_fn = AccessConfigurationRegister;
-		goto cs_failed;
-	}
+	ret = pcmcia_access_configuration_register(link, &reg);
+	if (ret)
+		goto failed;
 	return 0;
 
- cs_failed:
-	cs_error(link, last_fn, last_ret);
+ failed:
 	return -ENODEV;
 }
 
@@ -283,7 +271,7 @@ static void serial_remove(struct pcmcia_device *link)
 	struct serial_info *info = link->priv;
 	int i;
 
-	DEBUG(0, "serial_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "serial_release\n");
 
 	/*
 	 * Recheck to see if the device is still configured.
@@ -334,7 +322,7 @@ static int serial_probe(struct pcmcia_device *link)
 {
 	struct serial_info *info;
 
-	DEBUG(0, "serial_attach()\n");
+	dev_dbg(&link->dev, "serial_attach()\n");
 
 	/* Create new serial device */
 	info = kzalloc(sizeof (*info), GFP_KERNEL);
@@ -346,7 +334,6 @@ static int serial_probe(struct pcmcia_device *link)
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	link->io.NumPorts1 = 8;
 	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	if (do_sound) {
 		link->conf.Attributes |= CONF_ENABLE_SPKR;
@@ -370,7 +357,7 @@ static void serial_detach(struct pcmcia_device *link)
 {
 	struct serial_info *info = link->priv;
 
-	DEBUG(0, "serial_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "serial_detach\n");
 
 	/*
 	 * Ensure any outstanding scheduled tasks are completed.
@@ -399,7 +386,7 @@ static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
 	port.irq = irq;
 	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
 	port.uartclk = 1843200;
-	port.dev = &handle_to_dev(handle);
+	port.dev = &handle->dev;
 	if (buggy_uart)
 		port.flags |= UPF_BUGGY_UART;
 
@@ -426,21 +413,6 @@ static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
 
 /*====================================================================*/
 
-static int
-first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
-{
-	int i;
-	i = pcmcia_get_first_tuple(handle, tuple);
-	if (i != 0)
-		return i;
-	i = pcmcia_get_tuple_data(handle, tuple);
-	if (i != 0)
-		return i;
-	return pcmcia_parse_tuple(tuple, parse);
-}
-
-/*====================================================================*/
-
 static int simple_config_check(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cf,
 			       cistpl_cftable_entry_t *dflt,
@@ -522,15 +494,13 @@ static int simple_config(struct pcmcia_device *link)
 
 	printk(KERN_NOTICE
 	       "serial_cs: no usable port range found, giving up\n");
-	cs_error(link, RequestIO, i);
 	return -1;
 
 found_port:
 	i = pcmcia_request_irq(link, &link->irq);
-	if (i != 0) {
-		cs_error(link, RequestIRQ, i);
+	if (i != 0)
 		link->irq.AssignedIRQ = 0;
-	}
+
 	if (info->multi && (info->manfid == MANFID_3COM))
 		link->conf.ConfigIndex &= ~(0x08);
 
@@ -541,10 +511,8 @@ found_port:
 		info->quirk->config(link);
 
 	i = pcmcia_request_configuration(link, &link->conf);
-	if (i != 0) {
-		cs_error(link, RequestConfiguration, i);
+	if (i != 0)
 		return -1;
-	}
 	return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
 }
 
@@ -613,7 +581,6 @@ static int multi_config(struct pcmcia_device *link)
 		/* FIXME: comment does not fit, error handling does not fit */
 		printk(KERN_NOTICE
 		       "serial_cs: no usable port range found, giving up\n");
-		cs_error(link, RequestIRQ, i);
 		link->irq.AssignedIRQ = 0;
 	}
 
@@ -624,10 +591,8 @@ static int multi_config(struct pcmcia_device *link)
 		info->quirk->config(link);
 
 	i = pcmcia_request_configuration(link, &link->conf);
-	if (i != 0) {
-		cs_error(link, RequestConfiguration, i);
+	if (i != 0)
 		return -ENODEV;
-	}
 
 	/* The Oxford Semiconductor OXCF950 cards are in fact single-port:
 	 * 8 registers are for the UART, the others are extra registers.
@@ -665,6 +630,25 @@ static int multi_config(struct pcmcia_device *link)
 	return 0;
 }
 
+static int serial_check_for_multi(struct pcmcia_device *p_dev,
+				  cistpl_cftable_entry_t *cf,
+				  cistpl_cftable_entry_t *dflt,
+				  unsigned int vcc,
+				  void *priv_data)
+{
+	struct serial_info *info = p_dev->priv;
+
+	if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
+		info->multi = cf->io.win[0].len >> 3;
+
+	if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
+		(cf->io.win[1].len == 8))
+		info->multi = 2;
+
+	return 0; /* break */
+}
+
+
 /*======================================================================
 
     serial_config() is scheduled to run after a CARD_INSERTION event
@@ -676,46 +660,14 @@ static int multi_config(struct pcmcia_device *link)
 static int serial_config(struct pcmcia_device * link)
 {
 	struct serial_info *info = link->priv;
-	struct serial_cfg_mem *cfg_mem;
-	tuple_t *tuple;
-	u_char *buf;
-	cisparse_t *parse;
-	cistpl_cftable_entry_t *cf;
-	int i, last_ret, last_fn;
-
-	DEBUG(0, "serial_config(0x%p)\n", link);
-
-	cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
-	if (!cfg_mem)
-		goto failed;
+	int i;
 
-	tuple = &cfg_mem->tuple;
-	parse = &cfg_mem->parse;
-	cf = &parse->cftable_entry;
-	buf = cfg_mem->buf;
-
-	tuple->TupleData = (cisdata_t *) buf;
-	tuple->TupleOffset = 0;
-	tuple->TupleDataMax = 255;
-	tuple->Attributes = 0;
-
-	/* Get configuration register information */
-	tuple->DesiredTuple = CISTPL_CONFIG;
-	last_ret = first_tuple(link, tuple, parse);
-	if (last_ret != 0) {
-		last_fn = ParseTuple;
-		goto cs_failed;
-	}
-	link->conf.ConfigBase = parse->config.base;
-	link->conf.Present = parse->config.rmask[0];
+	dev_dbg(&link->dev, "serial_config\n");
 
 	/* Is this a compliant multifunction card? */
-	tuple->DesiredTuple = CISTPL_LONGLINK_MFC;
-	tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
-	info->multi = (first_tuple(link, tuple, parse) == 0);
+	info->multi = (link->socket->functions > 1);
 
 	/* Is this a multiport card? */
-	tuple->DesiredTuple = CISTPL_MANFID;
 	info->manfid = link->manf_id;
 	info->prodid = link->card_id;
 
@@ -730,20 +682,11 @@ static int serial_config(struct pcmcia_device * link)
 
 	/* Another check for dual-serial cards: look for either serial or
 	   multifunction cards that ask for appropriate IO port ranges */
-	tuple->DesiredTuple = CISTPL_FUNCID;
 	if ((info->multi == 0) &&
 	    (link->has_func_id) &&
 	    ((link->func_id == CISTPL_FUNCID_MULTI) ||
-	     (link->func_id == CISTPL_FUNCID_SERIAL))) {
-		tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
-		if (first_tuple(link, tuple, parse) == 0) {
-			if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
-				info->multi = cf->io.win[0].len >> 3;
-			if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
-			    (cf->io.win[1].len == 8))
-				info->multi = 2;
-		}
-	}
+	     (link->func_id == CISTPL_FUNCID_SERIAL)))
+		pcmcia_loop_config(link, serial_check_for_multi, info);
 
 	/*
 	 * Apply any multi-port quirk.
@@ -768,14 +711,10 @@ static int serial_config(struct pcmcia_device * link)
 			goto failed;
 
 	link->dev_node = &info->node[0];
-	kfree(cfg_mem);
 	return 0;
 
-cs_failed:
-	cs_error(link, last_fn, last_ret);
 failed:
 	serial_remove(link);
-	kfree(cfg_mem);
 	return -ENODEV;
 }