Merge branch 'origin' into for-linus

Conflicts:
	MAINTAINERS

51 files changed, 757 insertions, 702 deletions

diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index cb6d85d7ff43..1e3d19397a59 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -86,7 +86,7 @@ static void serial21285_enable_ms(struct uart_port *port)
 static irqreturn_t serial21285_rx_chars(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	unsigned int status, ch, flag, rxs, max_count = 256;
 
 	status = *CSR_UARTFLG;
@@ -124,7 +124,7 @@ static irqreturn_t serial21285_rx_chars(int irq, void *dev_id)
 static irqreturn_t serial21285_tx_chars(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 	int count = 256;
 
 	if (port->x_char) {
@@ -235,8 +235,8 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); 
 	quot = uart_get_divisor(port, baud);
 
-	if (port->info && port->info->port.tty) {
-		struct tty_struct *tty = port->info->port.tty;
+	if (port->state && port->state->port.tty) {
+		struct tty_struct *tty = port->state->port.tty;
 		unsigned int b = port->uartclk / (16 * quot);
 		tty_encode_baud_rate(tty, b, b);
 	}
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index fb867a9f55e9..2209620d2349 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1382,7 +1382,7 @@ static void serial8250_enable_ms(struct uart_port *port)
 static void
 receive_chars(struct uart_8250_port *up, unsigned int *status)
 {
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned char ch, lsr = *status;
 	int max_count = 256;
 	char flag;
@@ -1457,7 +1457,7 @@ ignore_char:
 
 static void transmit_chars(struct uart_8250_port *up)
 {
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 	int count;
 
 	if (up->port.x_char) {
@@ -1500,7 +1500,7 @@ static unsigned int check_modem_status(struct uart_8250_port *up)
 	status |= up->msr_saved_flags;
 	up->msr_saved_flags = 0;
 	if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
-	    up->port.info != NULL) {
+	    up->port.state != NULL) {
 		if (status & UART_MSR_TERI)
 			up->port.icount.rng++;
 		if (status & UART_MSR_DDSR)
@@ -1510,7 +1510,7 @@ static unsigned int check_modem_status(struct uart_8250_port *up)
 		if (status & UART_MSR_DCTS)
 			uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
 
-		wake_up_interruptible(&up->port.info->delta_msr_wait);
+		wake_up_interruptible(&up->port.state->port.delta_msr_wait);
 	}
 
 	return status;
@@ -1677,7 +1677,7 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
 		INIT_LIST_HEAD(&up->list);
 		i->head = &up->list;
 		spin_unlock_irq(&i->lock);
-
+		irq_flags |= up->port.irqflags;
 		ret = request_irq(up->port.irq, serial8250_interrupt,
 				  irq_flags, "serial", i);
 		if (ret < 0)
@@ -1764,7 +1764,7 @@ static void serial8250_backup_timeout(unsigned long data)
 	up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
 	spin_unlock_irqrestore(&up->port.lock, flags);
 	if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) &&
-	    (!uart_circ_empty(&up->port.info->xmit) || up->port.x_char) &&
+	    (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) &&
 	    (lsr & UART_LSR_THRE)) {
 		iir &= ~(UART_IIR_ID | UART_IIR_NO_INT);
 		iir |= UART_IIR_THRI;
@@ -2026,7 +2026,7 @@ static int serial8250_startup(struct uart_port *port)
 		 * allow register changes to become visible.
 		 */
 		spin_lock_irqsave(&up->port.lock, flags);
-		if (up->port.flags & UPF_SHARE_IRQ)
+		if (up->port.irqflags & IRQF_SHARED)
 			disable_irq_nosync(up->port.irq);
 
 		wait_for_xmitr(up, UART_LSR_THRE);
@@ -2039,7 +2039,7 @@ static int serial8250_startup(struct uart_port *port)
 		iir = serial_in(up, UART_IIR);
 		serial_out(up, UART_IER, 0);
 
-		if (up->port.flags & UPF_SHARE_IRQ)
+		if (up->port.irqflags & IRQF_SHARED)
 			enable_irq(up->port.irq);
 		spin_unlock_irqrestore(&up->port.lock, flags);
 
@@ -2272,7 +2272,9 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
 	/*
 	 * Ask the core to calculate the divisor for us.
 	 */
-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+	baud = uart_get_baud_rate(port, termios, old,
+				  port->uartclk / 16 / 0xffff,
+				  port->uartclk / 16);
 	quot = serial8250_get_divisor(port, baud);
 
 	/*
@@ -2671,6 +2673,7 @@ static void __init serial8250_isa_init_ports(void)
 	     i++, up++) {
 		up->port.iobase   = old_serial_port[i].port;
 		up->port.irq      = irq_canonicalize(old_serial_port[i].irq);
+		up->port.irqflags = old_serial_port[i].irqflags;
 		up->port.uartclk  = old_serial_port[i].baud_base * 16;
 		up->port.flags    = old_serial_port[i].flags;
 		up->port.hub6     = old_serial_port[i].hub6;
@@ -2679,7 +2682,7 @@ static void __init serial8250_isa_init_ports(void)
 		up->port.regshift = old_serial_port[i].iomem_reg_shift;
 		set_io_from_upio(&up->port);
 		if (share_irqs)
-			up->port.flags |= UPF_SHARE_IRQ;
+			up->port.irqflags |= IRQF_SHARED;
 	}
 }
 
@@ -2869,6 +2872,7 @@ int __init early_serial_setup(struct uart_port *port)
 	p->iobase       = port->iobase;
 	p->membase      = port->membase;
 	p->irq          = port->irq;
+	p->irqflags     = port->irqflags;
 	p->uartclk      = port->uartclk;
 	p->fifosize     = port->fifosize;
 	p->regshift     = port->regshift;
@@ -2942,6 +2946,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
 		port.iobase		= p->iobase;
 		port.membase		= p->membase;
 		port.irq		= p->irq;
+		port.irqflags		= p->irqflags;
 		port.uartclk		= p->uartclk;
 		port.regshift		= p->regshift;
 		port.iotype		= p->iotype;
@@ -2954,7 +2959,7 @@ static int __devinit serial8250_probe(struct platform_device *dev)
 		port.serial_out		= p->serial_out;
 		port.dev		= &dev->dev;
 		if (share_irqs)
-			port.flags |= UPF_SHARE_IRQ;
+			port.irqflags |= IRQF_SHARED;
 		ret = serial8250_register_port(&port);
 		if (ret < 0) {
 			dev_err(&dev->dev, "unable to register port at index %d "
@@ -3096,6 +3101,7 @@ int serial8250_register_port(struct uart_port *port)
 		uart->port.iobase       = port->iobase;
 		uart->port.membase      = port->membase;
 		uart->port.irq          = port->irq;
+		uart->port.irqflags     = port->irqflags;
 		uart->port.uartclk      = port->uartclk;
 		uart->port.fifosize     = port->fifosize;
 		uart->port.regshift     = port->regshift;
diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
index 520260326f3d..6e19ea3e48d5 100644
--- a/drivers/serial/8250.h
+++ b/drivers/serial/8250.h
@@ -25,6 +25,7 @@ struct old_serial_port {
 	unsigned char io_type;
 	unsigned char *iomem_base;
 	unsigned short iomem_reg_shift;
+	unsigned long irqflags;
 };
 
 /*
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 58a4879c7e48..429a8ae86933 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -117,7 +117,7 @@ static void pl010_enable_ms(struct uart_port *port)
 
 static void pl010_rx_chars(struct uart_amba_port *uap)
 {
-	struct tty_struct *tty = uap->port.info->port.tty;
+	struct tty_struct *tty = uap->port.state->port.tty;
 	unsigned int status, ch, flag, rsr, max_count = 256;
 
 	status = readb(uap->port.membase + UART01x_FR);
@@ -172,7 +172,7 @@ static void pl010_rx_chars(struct uart_amba_port *uap)
 
 static void pl010_tx_chars(struct uart_amba_port *uap)
 {
-	struct circ_buf *xmit = &uap->port.info->xmit;
+	struct circ_buf *xmit = &uap->port.state->xmit;
 	int count;
 
 	if (uap->port.x_char) {
@@ -225,7 +225,7 @@ static void pl010_modem_status(struct uart_amba_port *uap)
 	if (delta & UART01x_FR_CTS)
 		uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
 
-	wake_up_interruptible(&uap->port.info->delta_msr_wait);
+	wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
 }
 
 static irqreturn_t pl010_int(int irq, void *dev_id)
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 72ba0c6d3551..ef7adc8135dd 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -124,7 +124,7 @@ static void pl011_enable_ms(struct uart_port *port)
 
 static void pl011_rx_chars(struct uart_amba_port *uap)
 {
-	struct tty_struct *tty = uap->port.info->port.tty;
+	struct tty_struct *tty = uap->port.state->port.tty;
 	unsigned int status, ch, flag, max_count = 256;
 
 	status = readw(uap->port.membase + UART01x_FR);
@@ -175,7 +175,7 @@ static void pl011_rx_chars(struct uart_amba_port *uap)
 
 static void pl011_tx_chars(struct uart_amba_port *uap)
 {
-	struct circ_buf *xmit = &uap->port.info->xmit;
+	struct circ_buf *xmit = &uap->port.state->xmit;
 	int count;
 
 	if (uap->port.x_char) {
@@ -226,7 +226,7 @@ static void pl011_modem_status(struct uart_amba_port *uap)
 	if (delta & UART01x_FR_CTS)
 		uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
 
-	wake_up_interruptible(&uap->port.info->delta_msr_wait);
+	wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
 }
 
 static irqreturn_t pl011_int(int irq, void *dev_id)
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 607d43a31048..3551c5cb7094 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -427,7 +427,7 @@ static void atmel_rx_chars(struct uart_port *port)
  */
 static void atmel_tx_chars(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	if (port->x_char && UART_GET_CSR(port) & ATMEL_US_TXRDY) {
 		UART_PUT_CHAR(port, port->x_char);
@@ -560,7 +560,7 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
 static void atmel_tx_dma(struct uart_port *port)
 {
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 	struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
 	int count;
 
@@ -663,14 +663,14 @@ static void atmel_rx_from_ring(struct uart_port *port)
 	 * uart_start(), which takes the lock.
 	 */
 	spin_unlock(&port->lock);
-	tty_flip_buffer_push(port->info->port.tty);
+	tty_flip_buffer_push(port->state->port.tty);
 	spin_lock(&port->lock);
 }
 
 static void atmel_rx_from_dma(struct uart_port *port)
 {
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	struct atmel_dma_buffer *pdc;
 	int rx_idx = atmel_port->pdc_rx_idx;
 	unsigned int head;
@@ -776,7 +776,7 @@ static void atmel_tasklet_func(unsigned long data)
 		if (status_change & ATMEL_US_CTS)
 			uart_handle_cts_change(port, !(status & ATMEL_US_CTS));
 
-		wake_up_interruptible(&port->info->delta_msr_wait);
+		wake_up_interruptible(&port->state->port.delta_msr_wait);
 
 		atmel_port->irq_status_prev = status;
 	}
@@ -795,7 +795,7 @@ static void atmel_tasklet_func(unsigned long data)
 static int atmel_startup(struct uart_port *port)
 {
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	int retval;
 
 	/*
@@ -854,7 +854,7 @@ static int atmel_startup(struct uart_port *port)
 	}
 	if (atmel_use_dma_tx(port)) {
 		struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
-		struct circ_buf *xmit = &port->info->xmit;
+		struct circ_buf *xmit = &port->state->xmit;
 
 		pdc->buf = xmit->buf;
 		pdc->dma_addr = dma_map_single(port->dev,
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index b4a7650af696..50abb7e557f4 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -42,6 +42,10 @@
 # undef CONFIG_EARLY_PRINTK
 #endif
 
+#ifdef CONFIG_SERIAL_BFIN_MODULE
+# undef CONFIG_EARLY_PRINTK
+#endif
+
 /* UART name and device definitions */
 #define BFIN_SERIAL_NAME	"ttyBF"
 #define BFIN_SERIAL_MAJOR	204
@@ -140,7 +144,7 @@ static void bfin_serial_stop_tx(struct uart_port *port)
 {
 	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
 #ifdef CONFIG_SERIAL_BFIN_DMA
-	struct circ_buf *xmit = &uart->port.info->xmit;
+	struct circ_buf *xmit = &uart->port.state->xmit;
 #endif
 
 	while (!(UART_GET_LSR(uart) & TEMT))
@@ -167,7 +171,7 @@ static void bfin_serial_stop_tx(struct uart_port *port)
 static void bfin_serial_start_tx(struct uart_port *port)
 {
 	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
-	struct tty_struct *tty = uart->port.info->port.tty;
+	struct tty_struct *tty = uart->port.state->port.tty;
 
 #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
 	if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) {
@@ -239,10 +243,10 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
 			return;
 		}
 
-	if (!uart->port.info || !uart->port.info->port.tty)
+	if (!uart->port.state || !uart->port.state->port.tty)
 		return;
 #endif
-	tty = uart->port.info->port.tty;
+	tty = uart->port.state->port.tty;
 
 	if (ANOMALY_05000363) {
 		/* The BF533 (and BF561) family of processors have a nice anomaly
@@ -327,7 +331,7 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
 
 static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
 {
-	struct circ_buf *xmit = &uart->port.info->xmit;
+	struct circ_buf *xmit = &uart->port.state->xmit;
 
 	if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
 #ifdef CONFIG_BF54x
@@ -394,7 +398,7 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
 #ifdef CONFIG_SERIAL_BFIN_DMA
 static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
 {
-	struct circ_buf *xmit = &uart->port.info->xmit;
+	struct circ_buf *xmit = &uart->port.state->xmit;
 
 	uart->tx_done = 0;
 
@@ -432,7 +436,7 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
 
 static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
 {
-	struct tty_struct *tty = uart->port.info->port.tty;
+	struct tty_struct *tty = uart->port.state->port.tty;
 	int i, flg, status;
 
 	status = UART_GET_LSR(uart);
@@ -525,7 +529,7 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
 static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
 {
 	struct bfin_serial_port *uart = dev_id;
-	struct circ_buf *xmit = &uart->port.info->xmit;
+	struct circ_buf *xmit = &uart->port.state->xmit;
 
 #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
 	if (uart->scts && !(bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
@@ -961,10 +965,10 @@ static void bfin_serial_set_ldisc(struct uart_port *port)
 	int line = port->line;
 	unsigned short val;
 
-	if (line >= port->info->port.tty->driver->num)
+	if (line >= port->state->port.tty->driver->num)
 		return;
 
-	switch (port->info->port.tty->termios->c_line) {
+	switch (port->state->port.tty->termios->c_line) {
 	case N_IRDA:
 		val = UART_GET_GCTL(&bfin_serial_ports[line]);
 		val |= (IREN | RPOLC);
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index c108b1a0ce98..088bb35475f1 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -178,7 +178,7 @@ static int sport_uart_setup(struct sport_uart_port *up, int sclk, int baud_rate)
 static irqreturn_t sport_uart_rx_irq(int irq, void *dev_id)
 {
 	struct sport_uart_port *up = dev_id;
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned int ch;
 
 	do {
@@ -205,7 +205,7 @@ static irqreturn_t sport_uart_tx_irq(int irq, void *dev_id)
 static irqreturn_t sport_uart_err_irq(int irq, void *dev_id)
 {
 	struct sport_uart_port *up = dev_id;
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned int stat = SPORT_GET_STAT(up);
 
 	/* Overflow in RX FIFO */
@@ -290,7 +290,7 @@ fail1:
 
 static void sport_uart_tx_chars(struct sport_uart_port *up)
 {
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 
 	if (SPORT_GET_STAT(up) & TXF)
 		return;
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 80e76426131d..b6acd19b458e 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -93,7 +93,7 @@ static void clps711xuart_enable_ms(struct uart_port *port)
 static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	unsigned int status, ch, flg;
 
 	status = clps_readl(SYSFLG(port));
@@ -147,7 +147,7 @@ static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id)
 static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 	int count;
 
 	if (port->x_char) {
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index f8df0681e160..8d349b23249a 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -244,7 +244,7 @@ static void cpm_uart_int_rx(struct uart_port *port)
 	int i;
 	unsigned char ch;
 	u8 *cp;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
 	cbd_t __iomem *bdp;
 	u16 status;
diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c
index 6042b87797a1..57421d776329 100644
--- a/drivers/serial/dz.c
+++ b/drivers/serial/dz.c
@@ -197,7 +197,7 @@ static inline void dz_receive_chars(struct dz_mux *mux)
 	while ((status = dz_in(dport, DZ_RBUF)) & DZ_DVAL) {
 		dport = &mux->dport[LINE(status)];
 		uport = &dport->port;
-		tty = uport->info->port.tty;	/* point to the proper dev */
+		tty = uport->state->port.tty;	/* point to the proper dev */
 
 		ch = UCHAR(status);		/* grab the char */
 		flag = TTY_NORMAL;
@@ -249,7 +249,7 @@ static inline void dz_receive_chars(struct dz_mux *mux)
 	}
 	for (i = 0; i < DZ_NB_PORT; i++)
 		if (lines_rx[i])
-			tty_flip_buffer_push(mux->dport[i].port.info->port.tty);
+			tty_flip_buffer_push(mux->dport[i].port.state->port.tty);
 }
 
 /*
@@ -268,7 +268,7 @@ static inline void dz_transmit_chars(struct dz_mux *mux)
 
 	status = dz_in(dport, DZ_CSR);
 	dport = &mux->dport[LINE(status)];
-	xmit = &dport->port.info->xmit;
+	xmit = &dport->port.state->xmit;
 
 	if (dport->port.x_char) {		/* XON/XOFF chars */
 		dz_out(dport, DZ_TDR, dport->port.x_char);
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index cd1b6a45bb82..2d7feecaf492 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -617,7 +617,7 @@ static void shutdown(struct icom_port *icom_port)
 	 * disable break condition
 	 */
 	cmdReg = readb(&icom_port->dram->CmdReg);
-	if ((cmdReg | CMD_SND_BREAK) == CMD_SND_BREAK) {
+	if (cmdReg & CMD_SND_BREAK) {
 		writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg);
 	}
 }
@@ -627,7 +627,7 @@ static int icom_write(struct uart_port *port)
 	unsigned long data_count;
 	unsigned char cmdReg;
 	unsigned long offset;
-	int temp_tail = port->info->xmit.tail;
+	int temp_tail = port->state->xmit.tail;
 
 	trace(ICOM_PORT, "WRITE", 0);
 
@@ -638,11 +638,11 @@ static int icom_write(struct uart_port *port)
 	}
 
 	data_count = 0;
-	while ((port->info->xmit.head != temp_tail) &&
+	while ((port->state->xmit.head != temp_tail) &&
 	       (data_count <= XMIT_BUFF_SZ)) {
 
 		ICOM_PORT->xmit_buf[data_count++] =
-		    port->info->xmit.buf[temp_tail];
+		    port->state->xmit.buf[temp_tail];
 
 		temp_tail++;
 		temp_tail &= (UART_XMIT_SIZE - 1);
@@ -694,8 +694,8 @@ static inline void check_modem_status(struct icom_port *icom_port)
 			uart_handle_cts_change(&icom_port->uart_port,
 					       delta_status & ICOM_CTS);
 
-		wake_up_interruptible(&icom_port->uart_port.info->
-				      delta_msr_wait);
+		wake_up_interruptible(&icom_port->uart_port.state->
+				      port.delta_msr_wait);
 		old_status = status;
 	}
 	spin_unlock(&icom_port->uart_port.lock);
@@ -718,10 +718,10 @@ static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port)
 		icom_port->uart_port.icount.tx += count;
 
 		for (i=0; i<count &&
-			!uart_circ_empty(&icom_port->uart_port.info->xmit); i++) {
+			!uart_circ_empty(&icom_port->uart_port.state->xmit); i++) {
 
-			icom_port->uart_port.info->xmit.tail++;
-			icom_port->uart_port.info->xmit.tail &=
+			icom_port->uart_port.state->xmit.tail++;
+			icom_port->uart_port.state->xmit.tail &=
 				(UART_XMIT_SIZE - 1);
 		}
 
@@ -735,7 +735,7 @@ static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port)
 static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port)
 {
 	short int count, rcv_buff;
-	struct tty_struct *tty = icom_port->uart_port.info->port.tty;
+	struct tty_struct *tty = icom_port->uart_port.state->port.tty;
 	unsigned short int status;
 	struct uart_icount *icount;
 	unsigned long offset;
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 7485afd0df4c..18130f11238e 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -224,7 +224,7 @@ static void imx_mctrl_check(struct imx_port *sport)
 	if (changed & TIOCM_CTS)
 		uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
 
-	wake_up_interruptible(&sport->port.info->delta_msr_wait);
+	wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
 }
 
 /*
@@ -236,7 +236,7 @@ static void imx_timeout(unsigned long data)
 	struct imx_port *sport = (struct imx_port *)data;
 	unsigned long flags;
 
-	if (sport->port.info) {
+	if (sport->port.state) {
 		spin_lock_irqsave(&sport->port.lock, flags);
 		imx_mctrl_check(sport);
 		spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -323,7 +323,7 @@ static void imx_enable_ms(struct uart_port *port)
 
 static inline void imx_transmit_buffer(struct imx_port *sport)
 {
-	struct circ_buf *xmit = &sport->port.info->xmit;
+	struct circ_buf *xmit = &sport->port.state->xmit;
 
 	while (!(readl(sport->port.membase + UTS) & UTS_TXFULL)) {
 		/* send xmit->buf[xmit->tail]
@@ -388,7 +388,7 @@ static irqreturn_t imx_rtsint(int irq, void *dev_id)
 
 	writel(USR1_RTSD, sport->port.membase + USR1);
 	uart_handle_cts_change(&sport->port, !!val);
-	wake_up_interruptible(&sport->port.info->delta_msr_wait);
+	wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
 
 	spin_unlock_irqrestore(&sport->port.lock, flags);
 	return IRQ_HANDLED;
@@ -397,7 +397,7 @@ static irqreturn_t imx_rtsint(int irq, void *dev_id)
 static irqreturn_t imx_txint(int irq, void *dev_id)
 {
 	struct imx_port *sport = dev_id;
-	struct circ_buf *xmit = &sport->port.info->xmit;
+	struct circ_buf *xmit = &sport->port.state->xmit;
 	unsigned long flags;
 
 	spin_lock_irqsave(&sport->port.lock,flags);
@@ -427,7 +427,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
 {
 	struct imx_port *sport = dev_id;
 	unsigned int rx,flg,ignored = 0;
-	struct tty_struct *tty = sport->port.info->port.tty;
+	struct tty_struct *tty = sport->port.state->port.tty;
 	unsigned long flags, temp;
 
 	spin_lock_irqsave(&sport->port.lock,flags);
@@ -900,11 +900,11 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 	rational_best_approximation(16 * div * baud, sport->port.uartclk,
 		1 << 16, 1 << 16, &num, &denom);
 
-	if (port->info && port->info->port.tty) {
+	if (port->state && port->state->port.tty) {
 		tdiv64 = sport->port.uartclk;
 		tdiv64 *= num;
 		do_div(tdiv64, denom * 16 * div);
-		tty_encode_baud_rate(sport->port.info->port.tty,
+		tty_encode_baud_rate(sport->port.state->port.tty,
 				(speed_t)tdiv64, (speed_t)tdiv64);
 	}
 
diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c
index ae3699d77dd0..d8983dd5c4b2 100644
--- a/drivers/serial/ioc3_serial.c
+++ b/drivers/serial/ioc3_serial.c
@@ -897,25 +897,25 @@ static void transmit_chars(struct uart_port *the_port)
 	char *start;
 	struct tty_struct *tty;
 	struct ioc3_port *port = get_ioc3_port(the_port);
-	struct uart_info *info;
+	struct uart_state *state;
 
 	if (!the_port)
 		return;
 	if (!port)
 		return;
 
-	info = the_port->info;
-	tty = info->port.tty;
+	state = the_port->state;
+	tty = state->port.tty;
 
-	if (uart_circ_empty(&info->xmit) || uart_tx_stopped(the_port)) {
+	if (uart_circ_empty(&state->xmit) || uart_tx_stopped(the_port)) {
 		/* Nothing to do or hw stopped */
 		set_notification(port, N_ALL_OUTPUT, 0);
 		return;
 	}
 
-	head = info->xmit.head;
-	tail = info->xmit.tail;
-	start = (char *)&info->xmit.buf[tail];
+	head = state->xmit.head;
+	tail = state->xmit.tail;
+	start = (char *)&state->xmit.buf[tail];
 
 	/* write out all the data or until the end of the buffer */
 	xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail);
@@ -928,14 +928,14 @@ static void transmit_chars(struct uart_port *the_port)
 			/* advance the pointers */
 			tail += result;
 			tail &= UART_XMIT_SIZE - 1;
-			info->xmit.tail = tail;
-			start = (char *)&info->xmit.buf[tail];
+			state->xmit.tail = tail;
+			start = (char *)&state->xmit.buf[tail];
 		}
 	}
-	if (uart_circ_chars_pending(&info->xmit) < WAKEUP_CHARS)
+	if (uart_circ_chars_pending(&state->xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(the_port);
 
-	if (uart_circ_empty(&info->xmit)) {
+	if (uart_circ_empty(&state->xmit)) {
 		set_notification(port, N_OUTPUT_LOWAT, 0);
 	} else {
 		set_notification(port, N_OUTPUT_LOWAT, 1);
@@ -956,7 +956,7 @@ ioc3_change_speed(struct uart_port *the_port,
 	unsigned int cflag;
 	int baud;
 	int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8;
-	struct uart_info *info = the_port->info;
+	struct uart_state *state = the_port->state;
 
 	cflag = new_termios->c_cflag;
 
@@ -997,14 +997,14 @@ ioc3_change_speed(struct uart_port *the_port,
 
 	the_port->ignore_status_mask = N_ALL_INPUT;
 
-	info->port.tty->low_latency = 1;
+	state->port.tty->low_latency = 1;
 
-	if (I_IGNPAR(info->port.tty))
+	if (I_IGNPAR(state->port.tty))
 		the_port->ignore_status_mask &= ~(N_PARITY_ERROR
 						  | N_FRAMING_ERROR);
-	if (I_IGNBRK(info->port.tty)) {
+	if (I_IGNBRK(state->port.tty)) {
 		the_port->ignore_status_mask &= ~N_BREAK;
-		if (I_IGNPAR(info->port.tty))
+		if (I_IGNPAR(state->port.tty))
 			the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
 	}
 	if (!(cflag & CREAD)) {
@@ -1286,8 +1286,8 @@ static inline int do_read(struct uart_port *the_port, char *buf, int len)
 						uart_handle_dcd_change
 							(port->ip_port, 0);
 						wake_up_interruptible
-						    (&the_port->info->
-						     delta_msr_wait);
+						    (&the_port->state->
+						     port.delta_msr_wait);
 					}
 
 					/* If we had any data to return, we
@@ -1392,21 +1392,21 @@ static int receive_chars(struct uart_port *the_port)
 	struct tty_struct *tty;
 	unsigned char ch[MAX_CHARS];
 	int read_count = 0, read_room, flip = 0;
-	struct uart_info *info = the_port->info;
+	struct uart_state *state = the_port->state;
 	struct ioc3_port *port = get_ioc3_port(the_port);
 	unsigned long pflags;
 
 	/* Make sure all the pointers are "good" ones */
-	if (!info)
+	if (!state)
 		return 0;
-	if (!info->port.tty)
+	if (!state->port.tty)
 		return 0;
 
 	if (!(port->ip_flags & INPUT_ENABLE))
 		return 0;
 
 	spin_lock_irqsave(&the_port->lock, pflags);
-	tty = info->port.tty;
+	tty = state->port.tty;
 
 	read_count = do_read(the_port, ch, MAX_CHARS);
 	if (read_count > 0) {
@@ -1491,7 +1491,7 @@ ioc3uart_intr_one(struct ioc3_submodule *is,
 				uart_handle_dcd_change(the_port,
 						shadow & SHADOW_DCD);
 				wake_up_interruptible
-				    (&the_port->info->delta_msr_wait);
+				    (&the_port->state->port.delta_msr_wait);
 			} else if ((port->ip_notify & N_DDCD)
 				   && !(shadow & SHADOW_DCD)) {
 				/* Flag delta DCD/no DCD */
@@ -1511,7 +1511,7 @@ ioc3uart_intr_one(struct ioc3_submodule *is,
 				uart_handle_cts_change(the_port, shadow
 						& SHADOW_CTS);
 				wake_up_interruptible
-				    (&the_port->info->delta_msr_wait);
+				    (&the_port->state->port.delta_msr_wait);
 			}
 		}
 
@@ -1721,14 +1721,14 @@ static void ic3_shutdown(struct uart_port *the_port)
 {
 	unsigned long port_flags;
 	struct ioc3_port *port;
-	struct uart_info *info;
+	struct uart_state *state;
 
 	port = get_ioc3_port(the_port);
 	if (!port)
 		return;
 
-	info = the_port->info;
-	wake_up_interruptible(&info->delta_msr_wait);
+	state = the_port->state;
+	wake_up_interruptible(&state->port.delta_msr_wait);
 
 	spin_lock_irqsave(&the_port->lock, port_flags);
 	set_notification(port, N_ALL, 0);
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index 6bab63cd5b29..2e02c3026d24 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -930,7 +930,7 @@ static void handle_dma_error_intr(void *arg, uint32_t other_ir)
 
 	if (readl(&port->ip_mem->pci_err_addr_l.raw) & IOC4_PCI_ERR_ADDR_VLD) {
 		printk(KERN_ERR
-			"PCI error address is 0x%lx, "
+			"PCI error address is 0x%llx, "
 				"master is serial port %c %s\n",
 		     (((uint64_t)readl(&port->ip_mem->pci_err_addr_h)
 							 << 32)
@@ -1627,25 +1627,25 @@ static void transmit_chars(struct uart_port *the_port)
 	char *start;
 	struct tty_struct *tty;
 	struct ioc4_port *port = get_ioc4_port(the_port, 0);
-	struct uart_info *info;
+	struct uart_state *state;
 
 	if (!the_port)
 		return;
 	if (!port)
 		return;
 
-	info = the_port->info;
-	tty = info->port.tty;
+	state = the_port->state;
+	tty = state->port.tty;
 
-	if (uart_circ_empty(&info->xmit) || uart_tx_stopped(the_port)) {
+	if (uart_circ_empty(&state->xmit) || uart_tx_stopped(the_port)) {
 		/* Nothing to do or hw stopped */
 		set_notification(port, N_ALL_OUTPUT, 0);
 		return;
 	}
 
-	head = info->xmit.head;
-	tail = info->xmit.tail;
-	start = (char *)&info->xmit.buf[tail];
+	head = state->xmit.head;
+	tail = state->xmit.tail;
+	start = (char *)&state->xmit.buf[tail];
 
 	/* write out all the data or until the end of the buffer */
 	xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail);
@@ -1658,14 +1658,14 @@ static void transmit_chars(struct uart_port *the_port)
 			/* advance the pointers */
 			tail += result;
 			tail &= UART_XMIT_SIZE - 1;
-			info->xmit.tail = tail;
-			start = (char *)&info->xmit.buf[tail];
+			state->xmit.tail = tail;
+			start = (char *)&state->xmit.buf[tail];
 		}
 	}
-	if (uart_circ_chars_pending(&info->xmit) < WAKEUP_CHARS)
+	if (uart_circ_chars_pending(&state->xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(the_port);
 
-	if (uart_circ_empty(&info->xmit)) {
+	if (uart_circ_empty(&state->xmit)) {
 		set_notification(port, N_OUTPUT_LOWAT, 0);
 	} else {
 		set_notification(port, N_OUTPUT_LOWAT, 1);
@@ -1686,7 +1686,7 @@ ioc4_change_speed(struct uart_port *the_port,
 	int baud, bits;
 	unsigned cflag;
 	int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8;
-	struct uart_info *info = the_port->info;
+	struct uart_state *state = the_port->state;
 
 	cflag = new_termios->c_cflag;
 
@@ -1738,14 +1738,14 @@ ioc4_change_speed(struct uart_port *the_port,
 
 	the_port->ignore_status_mask = N_ALL_INPUT;
 
-	info->port.tty->low_latency = 1;
+	state->port.tty->low_latency = 1;
 
-	if (I_IGNPAR(info->port.tty))
+	if (I_IGNPAR(state->port.tty))
 		the_port->ignore_status_mask &= ~(N_PARITY_ERROR
 						| N_FRAMING_ERROR);
-	if (I_IGNBRK(info->port.tty)) {
+	if (I_IGNBRK(state->port.tty)) {
 		the_port->ignore_status_mask &= ~N_BREAK;
-		if (I_IGNPAR(info->port.tty))
+		if (I_IGNPAR(state->port.tty))
 			the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
 	}
 	if (!(cflag & CREAD)) {
@@ -1784,7 +1784,7 @@ ioc4_change_speed(struct uart_port *the_port,
 static inline int ic4_startup_local(struct uart_port *the_port)
 {
 	struct ioc4_port *port;
-	struct uart_info *info;
+	struct uart_state *state;
 
 	if (!the_port)
 		return -1;
@@ -1793,7 +1793,7 @@ static inline int ic4_startup_local(struct uart_port *the_port)
 	if (!port)
 		return -1;
 
-	info = the_port->info;
+	state = the_port->state;
 
 	local_open(port);
 
@@ -1801,7 +1801,7 @@ static inline int ic4_startup_local(struct uart_port *the_port)
 	ioc4_set_proto(port, the_port->mapbase);
 
 	/* set the speed of the serial port */
-	ioc4_change_speed(the_port, info->port.tty->termios,
+	ioc4_change_speed(the_port, state->port.tty->termios,
 			  (struct ktermios *)0);
 
 	return 0;
@@ -1882,7 +1882,7 @@ static void handle_intr(void *arg, uint32_t sio_ir)
 				the_port = port->ip_port;
 				the_port->icount.dcd = 1;
 				wake_up_interruptible
-					    (&the_port-> info->delta_msr_wait);
+					    (&the_port->state->port.delta_msr_wait);
 			} else if ((port->ip_notify & N_DDCD)
 					&& !(shadow & IOC4_SHADOW_DCD)) {
 				/* Flag delta DCD/no DCD */
@@ -1904,7 +1904,7 @@ static void handle_intr(void *arg, uint32_t sio_ir)
 				the_port->icount.cts =
 					(shadow & IOC4_SHADOW_CTS) ? 1 : 0;
 				wake_up_interruptible
-					(&the_port->info->delta_msr_wait);
+					(&the_port->state->port.delta_msr_wait);
 			}
 		}
 
@@ -2236,8 +2236,8 @@ static inline int do_read(struct uart_port *the_port, unsigned char *buf,
 						   && port->ip_port) {
 						the_port->icount.dcd = 0;
 						wake_up_interruptible
-						    (&the_port->info->
-							delta_msr_wait);
+						    (&the_port->state->
+							port.delta_msr_wait);
 					}
 
 					/* If we had any data to return, we
@@ -2341,17 +2341,17 @@ static void receive_chars(struct uart_port *the_port)
 	unsigned char ch[IOC4_MAX_CHARS];
 	int read_count, request_count = IOC4_MAX_CHARS;
 	struct uart_icount *icount;
-	struct uart_info *info = the_port->info;
+	struct uart_state *state = the_port->state;
 	unsigned long pflags;
 
 	/* Make sure all the pointers are "good" ones */
-	if (!info)
+	if (!state)
 		return;
-	if (!info->port.tty)
+	if (!state->port.tty)
 		return;
 
 	spin_lock_irqsave(&the_port->lock, pflags);
-	tty = info->port.tty;
+	tty = state->port.tty;
 
 	request_count = tty_buffer_request_room(tty, IOC4_MAX_CHARS);
 
@@ -2430,19 +2430,19 @@ static void ic4_shutdown(struct uart_port *the_port)
 {
 	unsigned long port_flags;
 	struct ioc4_port *port;
-	struct uart_info *info;
+	struct uart_state *state;
 
 	port = get_ioc4_port(the_port, 0);
 	if (!port)
 		return;
 
-	info = the_port->info;
+	state = the_port->state;
 	port->ip_port = NULL;
 
-	wake_up_interruptible(&info->delta_msr_wait);
+	wake_up_interruptible(&state->port.delta_msr_wait);
 
-	if (info->port.tty)
-		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+	if (state->port.tty)
+		set_bit(TTY_IO_ERROR, &state->port.tty->flags);
 
 	spin_lock_irqsave(&the_port->lock, port_flags);
 	set_notification(port, N_ALL, 0);
@@ -2538,7 +2538,7 @@ static int ic4_startup(struct uart_port *the_port)
 	int retval;
 	struct ioc4_port *port;
 	struct ioc4_control *control;
-	struct uart_info *info;
+	struct uart_state *state;
 	unsigned long port_flags;
 
 	if (!the_port)
@@ -2546,7 +2546,7 @@ static int ic4_startup(struct uart_port *the_port)
 	port = get_ioc4_port(the_port, 1);
 	if (!port)
 		return -ENODEV;
-	info = the_port->info;
+	state = the_port->state;
 
 	control = port->ip_control;
 	if (!control) {
diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c
index 0d9acbd0bb70..ebff4a1d4bcc 100644
--- a/drivers/serial/ip22zilog.c
+++ b/drivers/serial/ip22zilog.c
@@ -256,9 +256,9 @@ static struct tty_struct *ip22zilog_receive_chars(struct uart_ip22zilog_port *up
 	unsigned int r1;
 
 	tty = NULL;
-	if (up->port.info != NULL &&
-	    up->port.info->port.tty != NULL)
-		tty = up->port.info->port.tty;
+	if (up->port.state != NULL &&
+	    up->port.state->port.tty != NULL)
+		tty = up->port.state->port.tty;
 
 	for (;;) {
 		ch = readb(&channel->control);
@@ -354,7 +354,7 @@ static void ip22zilog_status_handle(struct uart_ip22zilog_port *up,
 			uart_handle_cts_change(&up->port,
 					       (status & CTS));
 
-		wake_up_interruptible(&up->port.info->delta_msr_wait);
+		wake_up_interruptible(&up->port.state->port.delta_msr_wait);
 	}
 
 	up->prev_status = status;
@@ -404,9 +404,9 @@ static void ip22zilog_transmit_chars(struct uart_ip22zilog_port *up,
 		return;
 	}
 
-	if (up->port.info == NULL)
+	if (up->port.state == NULL)
 		goto ack_tx_int;
-	xmit = &up->port.info->xmit;
+	xmit = &up->port.state->xmit;
 	if (uart_circ_empty(xmit))
 		goto ack_tx_int;
 	if (uart_tx_stopped(&up->port))
@@ -607,7 +607,7 @@ static void ip22zilog_start_tx(struct uart_port *port)
 		port->icount.tx++;
 		port->x_char = 0;
 	} else {
-		struct circ_buf *xmit = &port->info->xmit;
+		struct circ_buf *xmit = &port->state->xmit;
 
 		writeb(xmit->buf[xmit->tail], &channel->data);
 		ZSDELAY();
diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c
index 9dadaa11d266..b4b124e4828f 100644
--- a/drivers/serial/jsm/jsm_neo.c
+++ b/drivers/serial/jsm/jsm_neo.c
@@ -989,7 +989,7 @@ static void neo_param(struct jsm_channel *ch)
 			{     50, B50     },
 		};
 
-		cflag = C_BAUD(ch->uart_port.info->port.tty);
+		cflag = C_BAUD(ch->uart_port.state->port.tty);
 		baud = 9600;
 		for (i = 0; i < ARRAY_SIZE(baud_rates); i++) {
 			if (baud_rates[i].cflag == cflag) {
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 00f4577d2f7f..7439c0373620 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -147,7 +147,7 @@ static void jsm_tty_send_xchar(struct uart_port *port, char ch)
 	struct ktermios *termios;
 
 	spin_lock_irqsave(&port->lock, lock_flags);
-	termios = port->info->port.tty->termios;
+	termios = port->state->port.tty->termios;
 	if (ch == termios->c_cc[VSTART])
 		channel->ch_bd->bd_ops->send_start_character(channel);
 
@@ -245,7 +245,7 @@ static int jsm_tty_open(struct uart_port *port)
 	channel->ch_cached_lsr = 0;
 	channel->ch_stops_sent = 0;
 
-	termios = port->info->port.tty->termios;
+	termios = port->state->port.tty->termios;
 	channel->ch_c_cflag	= termios->c_cflag;
 	channel->ch_c_iflag	= termios->c_iflag;
 	channel->ch_c_oflag	= termios->c_oflag;
@@ -278,7 +278,7 @@ static void jsm_tty_close(struct uart_port *port)
 	jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n");
 
 	bd = channel->ch_bd;
-	ts = port->info->port.tty->termios;
+	ts = port->state->port.tty->termios;
 
 	channel->ch_flags &= ~(CH_STOPI);
 
@@ -530,7 +530,7 @@ void jsm_input(struct jsm_channel *ch)
 	if (!ch)
 		return;
 
-	tp = ch->uart_port.info->port.tty;
+	tp = ch->uart_port.state->port.tty;
 
 	bd = ch->ch_bd;
 	if(!bd)
@@ -849,7 +849,7 @@ int jsm_tty_write(struct uart_port *port)
 	u16 tail;
 	u16 tmask;
 	u32 remain;
-	int temp_tail = port->info->xmit.tail;
+	int temp_tail = port->state->xmit.tail;
 	struct jsm_channel *channel = (struct jsm_channel *)port;
 
 	tmask = WQUEUEMASK;
@@ -865,10 +865,10 @@ int jsm_tty_write(struct uart_port *port)
 	data_count = 0;
 	if (bufcount >= remain) {
 		bufcount -= remain;
-		while ((port->info->xmit.head != temp_tail) &&
+		while ((port->state->xmit.head != temp_tail) &&
 		(data_count < remain)) {
 			channel->ch_wqueue[head++] =
-			port->info->xmit.buf[temp_tail];
+			port->state->xmit.buf[temp_tail];
 
 			temp_tail++;
 			temp_tail &= (UART_XMIT_SIZE - 1);
@@ -880,10 +880,10 @@ int jsm_tty_write(struct uart_port *port)
 	data_count1 = 0;
 	if (bufcount > 0) {
 		remain = bufcount;
-		while ((port->info->xmit.head != temp_tail) &&
+		while ((port->state->xmit.head != temp_tail) &&
 			(data_count1 < remain)) {
 			channel->ch_wqueue[head++] =
-				port->info->xmit.buf[temp_tail];
+				port->state->xmit.buf[temp_tail];
 
 			temp_tail++;
 			temp_tail &= (UART_XMIT_SIZE - 1);
@@ -892,7 +892,7 @@ int jsm_tty_write(struct uart_port *port)
 		}
 	}
 
-	port->info->xmit.tail = temp_tail;
+	port->state->xmit.tail = temp_tail;
 
 	data_count += data_count1;
 	if (data_count) {
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
index 611c97a15654..bea5c215460c 100644
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -286,7 +286,7 @@ static void m32r_sio_start_tx(struct uart_port *port)
 {
 #ifdef CONFIG_SERIAL_M32R_PLDSIO
 	struct uart_sio_port *up = (struct uart_sio_port *)port;
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 
 	if (!(up->ier & UART_IER_THRI)) {
 		up->ier |= UART_IER_THRI;
@@ -325,7 +325,7 @@ static void m32r_sio_enable_ms(struct uart_port *port)
 
 static void receive_chars(struct uart_sio_port *up, int *status)
 {
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned char ch;
 	unsigned char flag;
 	int max_count = 256;
@@ -398,7 +398,7 @@ static void receive_chars(struct uart_sio_port *up, int *status)
 
 static void transmit_chars(struct uart_sio_port *up)
 {
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 	int count;
 
 	if (up->port.x_char) {
diff --git a/drivers/serial/max3100.c b/drivers/serial/max3100.c
index 9fd33e5622bd..3c30c56aa2e1 100644
--- a/drivers/serial/max3100.c
+++ b/drivers/serial/max3100.c
@@ -184,7 +184,7 @@ static void max3100_timeout(unsigned long data)
 {
 	struct max3100_port *s = (struct max3100_port *)data;
 
-	if (s->port.info) {
+	if (s->port.state) {
 		max3100_dowork(s);
 		mod_timer(&s->timer, jiffies + s->poll_time);
 	}
@@ -261,7 +261,7 @@ static void max3100_work(struct work_struct *w)
 	int rxchars;
 	u16 tx, rx;
 	int conf, cconf, rts, crts;
-	struct circ_buf *xmit = &s->port.info->xmit;
+	struct circ_buf *xmit = &s->port.state->xmit;
 
 	dev_dbg(&s->spi->dev, "%s\n", __func__);
 
@@ -307,8 +307,8 @@ static void max3100_work(struct work_struct *w)
 			}
 		}
 
-		if (rxchars > 16 && s->port.info->port.tty != NULL) {
-			tty_flip_buffer_push(s->port.info->port.tty);
+		if (rxchars > 16 && s->port.state->port.tty != NULL) {
+			tty_flip_buffer_push(s->port.state->port.tty);
 			rxchars = 0;
 		}
 		if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -320,8 +320,8 @@ static void max3100_work(struct work_struct *w)
 		  (!uart_circ_empty(xmit) &&
 		   !uart_tx_stopped(&s->port))));
 
-	if (rxchars > 0 && s->port.info->port.tty != NULL)
-		tty_flip_buffer_push(s->port.info->port.tty);
+	if (rxchars > 0 && s->port.state->port.tty != NULL)
+		tty_flip_buffer_push(s->port.state->port.tty);
 }
 
 static irqreturn_t max3100_irq(int irqno, void *dev_id)
@@ -429,7 +429,7 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios,
 	int baud = 0;
 	unsigned cflag;
 	u32 param_new, param_mask, parity = 0;
-	struct tty_struct *tty = s->port.info->port.tty;
+	struct tty_struct *tty = s->port.state->port.tty;
 
 	dev_dbg(&s->spi->dev, "%s\n", __func__);
 	if (!tty)
@@ -529,7 +529,7 @@ max3100_set_termios(struct uart_port *port, struct ktermios *termios,
 			MAX3100_STATUS_OE;
 
 	/* we are sending char from a workqueue so enable */
-	s->port.info->port.tty->low_latency = 1;
+	s->port.state->port.tty->low_latency = 1;
 
 	if (s->poll_time > 0)
 		del_timer_sync(&s->timer);
@@ -925,3 +925,4 @@ module_exit(max3100_exit);
 MODULE_DESCRIPTION("MAX3100 driver");
 MODULE_AUTHOR("Christian Pellegrin <chripell@evolware.org>");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:max3100");
diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c
index 0eefb07bebaf..b44382442bf1 100644
--- a/drivers/serial/mcf.c
+++ b/drivers/serial/mcf.c
@@ -323,7 +323,7 @@ static void mcf_rx_chars(struct mcf_uart *pp)
 		uart_insert_char(port, status, MCFUART_USR_RXOVERRUN, ch, flag);
 	}
 
-	tty_flip_buffer_push(port->info->port.tty);
+	tty_flip_buffer_push(port->state->port.tty);
 }
 
 /****************************************************************************/
@@ -331,7 +331,7 @@ static void mcf_rx_chars(struct mcf_uart *pp)
 static void mcf_tx_chars(struct mcf_uart *pp)
 {
 	struct uart_port *port = &pp->port;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	if (port->x_char) {
 		/* Send special char - probably flow control */
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index abbd146c50d9..d7bcd074d383 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -745,7 +745,7 @@ static struct uart_ops mpc52xx_uart_ops = {
 static inline int
 mpc52xx_uart_int_rx_chars(struct uart_port *port)
 {
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	unsigned char ch, flag;
 	unsigned short status;
 
@@ -812,7 +812,7 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
 static inline int
 mpc52xx_uart_int_tx_chars(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	/* Process out of band chars */
 	if (port->x_char) {
diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
index 61d3ade5286c..b5496c28e60b 100644
--- a/drivers/serial/mpsc.c
+++ b/drivers/serial/mpsc.c
@@ -936,7 +936,7 @@ static int serial_polled;
 static int mpsc_rx_intr(struct mpsc_port_info *pi)
 {
 	struct mpsc_rx_desc *rxre;
-	struct tty_struct *tty = pi->port.info->port.tty;
+	struct tty_struct *tty = pi->port.state->port.tty;
 	u32	cmdstat, bytes_in, i;
 	int	rc = 0;
 	u8	*bp;
@@ -1109,7 +1109,7 @@ static void mpsc_setup_tx_desc(struct mpsc_port_info *pi, u32 count, u32 intr)
 
 static void mpsc_copy_tx_data(struct mpsc_port_info *pi)
 {
-	struct circ_buf *xmit = &pi->port.info->xmit;
+	struct circ_buf *xmit = &pi->port.state->xmit;
 	u8 *bp;
 	u32 i;
 
diff --git a/drivers/serial/msm_serial.c b/drivers/serial/msm_serial.c
index f7c24baa1416..b05c5aa02cb4 100644
--- a/drivers/serial/msm_serial.c
+++ b/drivers/serial/msm_serial.c
@@ -88,7 +88,7 @@ static void msm_enable_ms(struct uart_port *port)
 
 static void handle_rx(struct uart_port *port)
 {
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	unsigned int sr;
 
 	/*
@@ -136,7 +136,7 @@ static void handle_rx(struct uart_port *port)
 
 static void handle_tx(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 	struct msm_port *msm_port = UART_TO_MSM(port);
 	int sent_tx;
 
@@ -169,7 +169,7 @@ static void handle_delta_cts(struct uart_port *port)
 {
 	msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
 	port->icount.cts++;
-	wake_up_interruptible(&port->info->delta_msr_wait);
+	wake_up_interruptible(&port->state->port.delta_msr_wait);
 }
 
 static irqreturn_t msm_irq(int irq, void *dev_id)
diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
index 953a5ffa9b44..7571aaa138b0 100644
--- a/drivers/serial/mux.c
+++ b/drivers/serial/mux.c
@@ -199,7 +199,7 @@ static void mux_break_ctl(struct uart_port *port, int break_state)
 static void mux_write(struct uart_port *port)
 {
 	int count;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	if(port->x_char) {
 		UART_PUT_CHAR(port, port->x_char);
@@ -243,7 +243,7 @@ static void mux_write(struct uart_port *port)
 static void mux_read(struct uart_port *port)
 {
 	int data;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	__u32 start_count = port->icount.rx;
 
 	while(1) {
diff --git a/drivers/serial/netx-serial.c b/drivers/serial/netx-serial.c
index 3e5dda8518b7..7735c9f35fa0 100644
--- a/drivers/serial/netx-serial.c
+++ b/drivers/serial/netx-serial.c
@@ -140,7 +140,7 @@ static void netx_enable_ms(struct uart_port *port)
 
 static inline void netx_transmit_buffer(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	if (port->x_char) {
 		writel(port->x_char, port->membase + UART_DR);
@@ -185,7 +185,7 @@ static unsigned int netx_tx_empty(struct uart_port *port)
 
 static void netx_txint(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
 		netx_stop_tx(port);
@@ -201,7 +201,7 @@ static void netx_txint(struct uart_port *port)
 static void netx_rxint(struct uart_port *port)
 {
 	unsigned char rx, flg, status;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 
 	while (!(readl(port->membase + UART_FR) & FR_RXFE)) {
 		rx = readl(port->membase + UART_DR);
diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c
index 9e150b19d726..e1ab8ec0a4a6 100644
--- a/drivers/serial/nwpserial.c
+++ b/drivers/serial/nwpserial.c
@@ -126,7 +126,7 @@ static void nwpserial_config_port(struct uart_port *port, int flags)
 static irqreturn_t nwpserial_interrupt(int irq, void *dev_id)
 {
 	struct nwpserial_port *up = dev_id;
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	irqreturn_t ret;
 	unsigned int iir;
 	unsigned char ch;
@@ -261,7 +261,7 @@ static void nwpserial_start_tx(struct uart_port *port)
 	struct nwpserial_port *up;
 	struct circ_buf *xmit;
 	up = container_of(port, struct nwpserial_port, port);
-	xmit  = &up->port.info->xmit;
+	xmit  = &up->port.state->xmit;
 
 	if (port->x_char) {
 		nwpserial_putchar(up, up->port.x_char);
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 9c1243fbd512..0700cd10b97c 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -242,12 +242,12 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
 	}
 
 	/* Sanity check, make sure the old bug is no longer happening */
-	if (uap->port.info == NULL || uap->port.info->port.tty == NULL) {
+	if (uap->port.state == NULL || uap->port.state->port.tty == NULL) {
 		WARN_ON(1);
 		(void)read_zsdata(uap);
 		return NULL;
 	}
-	tty = uap->port.info->port.tty;
+	tty = uap->port.state->port.tty;
 
 	while (1) {
 		error = 0;
@@ -369,7 +369,7 @@ static void pmz_status_handle(struct uart_pmac_port *uap)
 			uart_handle_cts_change(&uap->port,
 					       !(status & CTS));
 
-		wake_up_interruptible(&uap->port.info->delta_msr_wait);
+		wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
 	}
 
 	if (status & BRK_ABRT)
@@ -420,9 +420,9 @@ static void pmz_transmit_chars(struct uart_pmac_port *uap)
 		return;
 	}
 
-	if (uap->port.info == NULL)
+	if (uap->port.state == NULL)
 		goto ack_tx_int;
-	xmit = &uap->port.info->xmit;
+	xmit = &uap->port.state->xmit;
 	if (uart_circ_empty(xmit)) {
 		uart_write_wakeup(&uap->port);
 		goto ack_tx_int;
@@ -655,7 +655,7 @@ static void pmz_start_tx(struct uart_port *port)
 		port->icount.tx++;
 		port->x_char = 0;
 	} else {
-		struct circ_buf *xmit = &port->info->xmit;
+		struct circ_buf *xmit = &port->state->xmit;
 
 		write_zsdata(uap, xmit->buf[xmit->tail]);
 		zssync(uap);
@@ -1645,7 +1645,7 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
 	state = pmz_uart_reg.state + uap->port.line;
 
 	mutex_lock(&pmz_irq_mutex);
-	mutex_lock(&state->mutex);
+	mutex_lock(&state->port.mutex);
 
 	spin_lock_irqsave(&uap->port.lock, flags);
 
@@ -1676,7 +1676,7 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
 	/* Shut the chip down */
 	pmz_set_scc_power(uap, 0);
 
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&state->port.mutex);
 	mutex_unlock(&pmz_irq_mutex);
 
 	pmz_debug("suspend, switching complete\n");
@@ -1705,7 +1705,7 @@ static int pmz_resume(struct macio_dev *mdev)
 	state = pmz_uart_reg.state + uap->port.line;
 
 	mutex_lock(&pmz_irq_mutex);
-	mutex_lock(&state->mutex);
+	mutex_lock(&state->port.mutex);
 
 	spin_lock_irqsave(&uap->port.lock, flags);
 	if (!ZS_IS_OPEN(uap) && !ZS_IS_CONS(uap)) {
@@ -1737,7 +1737,7 @@ static int pmz_resume(struct macio_dev *mdev)
 	}
 
  bail:
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&state->port.mutex);
 	mutex_unlock(&pmz_irq_mutex);
 
 	/* Right now, we deal with delay by blocking here, I'll be
diff --git a/drivers/serial/pnx8xxx_uart.c b/drivers/serial/pnx8xxx_uart.c
index 1bb8f1b45767..0aa75a97531c 100644
--- a/drivers/serial/pnx8xxx_uart.c
+++ b/drivers/serial/pnx8xxx_uart.c
@@ -100,7 +100,7 @@ static void pnx8xxx_mctrl_check(struct pnx8xxx_port *sport)
 	if (changed & TIOCM_CTS)
 		uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
 
-	wake_up_interruptible(&sport->port.info->delta_msr_wait);
+	wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
 }
 
 /*
@@ -112,7 +112,7 @@ static void pnx8xxx_timeout(unsigned long data)
 	struct pnx8xxx_port *sport = (struct pnx8xxx_port *)data;
 	unsigned long flags;
 
-	if (sport->port.info) {
+	if (sport->port.state) {
 		spin_lock_irqsave(&sport->port.lock, flags);
 		pnx8xxx_mctrl_check(sport);
 		spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -181,7 +181,7 @@ static void pnx8xxx_enable_ms(struct uart_port *port)
 
 static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport)
 {
-	struct tty_struct *tty = sport->port.info->port.tty;
+	struct tty_struct *tty = sport->port.state->port.tty;
 	unsigned int status, ch, flg;
 
 	status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) |
@@ -243,7 +243,7 @@ static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport)
 
 static void pnx8xxx_tx_chars(struct pnx8xxx_port *sport)
 {
-	struct circ_buf *xmit = &sport->port.info->xmit;
+	struct circ_buf *xmit = &sport->port.state->xmit;
 
 	if (sport->port.x_char) {
 		serial_out(sport, PNX8XXX_FIFO, sport->port.x_char);
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index 514971fb5bff..b8629d74f6a2 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -96,7 +96,7 @@ static void serial_pxa_stop_rx(struct uart_port *port)
 
 static inline void receive_chars(struct uart_pxa_port *up, int *status)
 {
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned int ch, flag;
 	int max_count = 256;
 
@@ -161,7 +161,7 @@ static inline void receive_chars(struct uart_pxa_port *up, int *status)
 
 static void transmit_chars(struct uart_pxa_port *up)
 {
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 	int count;
 
 	if (up->port.x_char) {
@@ -220,7 +220,7 @@ static inline void check_modem_status(struct uart_pxa_port *up)
 	if (status & UART_MSR_DCTS)
 		uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
 
-	wake_up_interruptible(&up->port.info->delta_msr_wait);
+	wake_up_interruptible(&up->port.state->port.delta_msr_wait);
 }
 
 /*
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index 94530f01521e..7f5e26873220 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -117,7 +117,7 @@ static void sa1100_mctrl_check(struct sa1100_port *sport)
 	if (changed & TIOCM_CTS)
 		uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
 
-	wake_up_interruptible(&sport->port.info->delta_msr_wait);
+	wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
 }
 
 /*
@@ -129,7 +129,7 @@ static void sa1100_timeout(unsigned long data)
 	struct sa1100_port *sport = (struct sa1100_port *)data;
 	unsigned long flags;
 
-	if (sport->port.info) {
+	if (sport->port.state) {
 		spin_lock_irqsave(&sport->port.lock, flags);
 		sa1100_mctrl_check(sport);
 		spin_unlock_irqrestore(&sport->port.lock, flags);
@@ -189,7 +189,7 @@ static void sa1100_enable_ms(struct uart_port *port)
 static void
 sa1100_rx_chars(struct sa1100_port *sport)
 {
-	struct tty_struct *tty = sport->port.info->port.tty;
+	struct tty_struct *tty = sport->port.state->port.tty;
 	unsigned int status, ch, flg;
 
 	status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) |
@@ -239,7 +239,7 @@ sa1100_rx_chars(struct sa1100_port *sport)
 
 static void sa1100_tx_chars(struct sa1100_port *sport)
 {
-	struct circ_buf *xmit = &sport->port.info->xmit;
+	struct circ_buf *xmit = &sport->port.state->xmit;
 
 	if (sport->port.x_char) {
 		UART_PUT_CHAR(sport, sport->port.x_char);
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index c8851a0db63a..1523e8d9ae77 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -196,7 +196,7 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id)
 {
 	struct s3c24xx_uart_port *ourport = dev_id;
 	struct uart_port *port = &ourport->port;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	unsigned int ufcon, ch, flag, ufstat, uerstat;
 	int max_count = 64;
 
@@ -281,7 +281,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
 {
 	struct s3c24xx_uart_port *ourport = id;
 	struct uart_port *port = &ourport->port;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 	int count = 256;
 
 	if (port->x_char) {
@@ -992,10 +992,10 @@ static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
 		struct ktermios *termios;
 		struct tty_struct *tty;
 
-		if (uport->info == NULL)
+		if (uport->state == NULL)
 			goto exit;
 
-		tty = uport->info->port.tty;
+		tty = uport->state->port.tty;
 
 		if (tty == NULL)
 			goto exit;
diff --git a/drivers/serial/sb1250-duart.c b/drivers/serial/sb1250-duart.c
index 319e8b83f6be..a2f2b3254499 100644
--- a/drivers/serial/sb1250-duart.c
+++ b/drivers/serial/sb1250-duart.c
@@ -384,13 +384,13 @@ static void sbd_receive_chars(struct sbd_port *sport)
 		uart_insert_char(uport, status, M_DUART_OVRUN_ERR, ch, flag);
 	}
 
-	tty_flip_buffer_push(uport->info->port.tty);
+	tty_flip_buffer_push(uport->state->port.tty);
 }
 
 static void sbd_transmit_chars(struct sbd_port *sport)
 {
 	struct uart_port *uport = &sport->port;
-	struct circ_buf *xmit = &sport->port.info->xmit;
+	struct circ_buf *xmit = &sport->port.state->xmit;
 	unsigned int mask;
 	int stop_tx;
 
@@ -440,7 +440,7 @@ static void sbd_status_handle(struct sbd_port *sport)
 
 	if (delta & ((M_DUART_IN_PIN2_VAL | M_DUART_IN_PIN0_VAL) <<
 		     S_DUART_IN_PIN_CHNG))
-		wake_up_interruptible(&uport->info->delta_msr_wait);
+		wake_up_interruptible(&uport->state->port.delta_msr_wait);
 }
 
 static irqreturn_t sbd_interrupt(int irq, void *dev_id)
diff --git a/drivers/serial/sc26xx.c b/drivers/serial/sc26xx.c
index e0be11ceaa25..75038ad2b242 100644
--- a/drivers/serial/sc26xx.c
+++ b/drivers/serial/sc26xx.c
@@ -140,8 +140,8 @@ static struct tty_struct *receive_chars(struct uart_port *port)
 	char flag;
 	u8 status;
 
-	if (port->info != NULL)		/* Unopened serial console */
-		tty = port->info->port.tty;
+	if (port->state != NULL)		/* Unopened serial console */
+		tty = port->state->port.tty;
 
 	while (limit-- > 0) {
 		status = READ_SC_PORT(port, SR);
@@ -190,10 +190,10 @@ static void transmit_chars(struct uart_port *port)
 {
 	struct circ_buf *xmit;
 
-	if (!port->info)
+	if (!port->state)
 		return;
 
-	xmit = &port->info->xmit;
+	xmit = &port->state->xmit;
 	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
 		sc26xx_disable_irq(port, IMR_TXRDY);
 		return;
@@ -316,7 +316,7 @@ static void sc26xx_stop_tx(struct uart_port *port)
 /* port->lock held by caller.  */
 static void sc26xx_start_tx(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	while (!uart_circ_empty(xmit)) {
 		if (!(READ_SC_PORT(port, SR) & SR_TXRDY)) {
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index b0bb29d804ae..1689bda1d13b 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -29,10 +29,10 @@
 #include <linux/console.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
-#include <linux/serial_core.h>
 #include <linux/smp_lock.h>
 #include <linux/device.h>
 #include <linux/serial.h> /* for serial_state and serial_icounter_struct */
+#include <linux/serial_core.h>
 #include <linux/delay.h>
 #include <linux/mutex.h>
 
@@ -52,8 +52,6 @@ static struct lock_class_key port_lock_key;
 
 #define HIGH_BITS_OFFSET	((sizeof(long)-sizeof(int))*8)
 
-#define uart_users(state)	((state)->count + (state)->info.port.blocked_open)
-
 #ifdef CONFIG_SERIAL_CORE_CONSOLE
 #define uart_console(port)	((port)->cons && (port)->cons->index == (port)->line)
 #else
@@ -71,19 +69,19 @@ static void uart_change_pm(struct uart_state *state, int pm_state);
  */
 void uart_write_wakeup(struct uart_port *port)
 {
-	struct uart_info *info = port->info;
+	struct uart_state *state = port->state;
 	/*
 	 * This means you called this function _after_ the port was
 	 * closed.  No cookie for you.
 	 */
-	BUG_ON(!info);
-	tasklet_schedule(&info->tlet);
+	BUG_ON(!state);
+	tasklet_schedule(&state->tlet);
 }
 
 static void uart_stop(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->port;
+	struct uart_port *port = state->uart_port;
 	unsigned long flags;
 
 	spin_lock_irqsave(&port->lock, flags);
@@ -94,9 +92,9 @@ static void uart_stop(struct tty_struct *tty)
 static void __uart_start(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->port;
+	struct uart_port *port = state->uart_port;
 
-	if (!uart_circ_empty(&state->info.xmit) && state->info.xmit.buf &&
+	if (!uart_circ_empty(&state->xmit) && state->xmit.buf &&
 	    !tty->stopped && !tty->hw_stopped)
 		port->ops->start_tx(port);
 }
@@ -104,7 +102,7 @@ static void __uart_start(struct tty_struct *tty)
 static void uart_start(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->port;
+	struct uart_port *port = state->uart_port;
 	unsigned long flags;
 
 	spin_lock_irqsave(&port->lock, flags);
@@ -115,7 +113,7 @@ static void uart_start(struct tty_struct *tty)
 static void uart_tasklet_action(unsigned long data)
 {
 	struct uart_state *state = (struct uart_state *)data;
-	tty_wakeup(state->info.port.tty);
+	tty_wakeup(state->port.tty);
 }
 
 static inline void
@@ -141,12 +139,12 @@ uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear)
  */
 static int uart_startup(struct uart_state *state, int init_hw)
 {
-	struct uart_info *info = &state->info;
-	struct uart_port *port = state->port;
+	struct uart_port *uport = state->uart_port;
+	struct tty_port *port = &state->port;
 	unsigned long page;
 	int retval = 0;
 
-	if (info->flags & UIF_INITIALIZED)
+	if (port->flags & ASYNC_INITIALIZED)
 		return 0;
 
 	/*
@@ -154,26 +152,26 @@ static int uart_startup(struct uart_state *state, int init_hw)
 	 * once we have successfully opened the port.  Also set
 	 * up the tty->alt_speed kludge
 	 */
-	set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+	set_bit(TTY_IO_ERROR, &port->tty->flags);
 
-	if (port->type == PORT_UNKNOWN)
+	if (uport->type == PORT_UNKNOWN)
 		return 0;
 
 	/*
 	 * Initialise and allocate the transmit and temporary
 	 * buffer.
 	 */
-	if (!info->xmit.buf) {
+	if (!state->xmit.buf) {
 		/* This is protected by the per port mutex */
 		page = get_zeroed_page(GFP_KERNEL);
 		if (!page)
 			return -ENOMEM;
 
-		info->xmit.buf = (unsigned char *) page;
-		uart_circ_clear(&info->xmit);
+		state->xmit.buf = (unsigned char *) page;
+		uart_circ_clear(&state->xmit);
 	}
 
-	retval = port->ops->startup(port);
+	retval = uport->ops->startup(uport);
 	if (retval == 0) {
 		if (init_hw) {
 			/*
@@ -185,20 +183,20 @@ static int uart_startup(struct uart_state *state, int init_hw)
 			 * Setup the RTS and DTR signals once the
 			 * port is open and ready to respond.
 			 */
-			if (info->port.tty->termios->c_cflag & CBAUD)
-				uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR);
+			if (port->tty->termios->c_cflag & CBAUD)
+				uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
 		}
 
-		if (info->flags & UIF_CTS_FLOW) {
-			spin_lock_irq(&port->lock);
-			if (!(port->ops->get_mctrl(port) & TIOCM_CTS))
-				info->port.tty->hw_stopped = 1;
-			spin_unlock_irq(&port->lock);
+		if (port->flags & ASYNC_CTS_FLOW) {
+			spin_lock_irq(&uport->lock);
+			if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS))
+				port->tty->hw_stopped = 1;
+			spin_unlock_irq(&uport->lock);
 		}
 
-		info->flags |= UIF_INITIALIZED;
+		set_bit(ASYNCB_INITIALIZED, &port->flags);
 
-		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
+		clear_bit(TTY_IO_ERROR, &port->tty->flags);
 	}
 
 	if (retval && capable(CAP_SYS_ADMIN))
@@ -214,9 +212,9 @@ static int uart_startup(struct uart_state *state, int init_hw)
  */
 static void uart_shutdown(struct uart_state *state)
 {
-	struct uart_info *info = &state->info;
-	struct uart_port *port = state->port;
-	struct tty_struct *tty = info->port.tty;
+	struct uart_port *uport = state->uart_port;
+	struct tty_port *port = &state->port;
+	struct tty_struct *tty = port->tty;
 
 	/*
 	 * Set the TTY IO error marker
@@ -224,14 +222,12 @@ static void uart_shutdown(struct uart_state *state)
 	if (tty)
 		set_bit(TTY_IO_ERROR, &tty->flags);
 
-	if (info->flags & UIF_INITIALIZED) {
-		info->flags &= ~UIF_INITIALIZED;
-
+	if (test_and_clear_bit(ASYNCB_INITIALIZED, &port->flags)) {
 		/*
 		 * Turn off DTR and RTS early.
 		 */
 		if (!tty || (tty->termios->c_cflag & HUPCL))
-			uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+			uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
 
 		/*
 		 * clear delta_msr_wait queue to avoid mem leaks: we may free
@@ -240,30 +236,30 @@ static void uart_shutdown(struct uart_state *state)
 		 * any outstanding file descriptors should be pointing at
 		 * hung_up_tty_fops now.
 		 */
-		wake_up_interruptible(&info->delta_msr_wait);
+		wake_up_interruptible(&port->delta_msr_wait);
 
 		/*
 		 * Free the IRQ and disable the port.
 		 */
-		port->ops->shutdown(port);
+		uport->ops->shutdown(uport);
 
 		/*
 		 * Ensure that the IRQ handler isn't running on another CPU.
 		 */
-		synchronize_irq(port->irq);
+		synchronize_irq(uport->irq);
 	}
 
 	/*
 	 * kill off our tasklet
 	 */
-	tasklet_kill(&info->tlet);
+	tasklet_kill(&state->tlet);
 
 	/*
 	 * Free the transmit buffer page.
 	 */
-	if (info->xmit.buf) {
-		free_page((unsigned long)info->xmit.buf);
-		info->xmit.buf = NULL;
+	if (state->xmit.buf) {
+		free_page((unsigned long)state->xmit.buf);
+		state->xmit.buf = NULL;
 	}
 }
 
@@ -430,15 +426,16 @@ EXPORT_SYMBOL(uart_get_divisor);
 static void
 uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
 {
-	struct tty_struct *tty = state->info.port.tty;
-	struct uart_port *port = state->port;
+	struct tty_port *port = &state->port;
+	struct tty_struct *tty = port->tty;
+	struct uart_port *uport = state->uart_port;
 	struct ktermios *termios;
 
 	/*
 	 * If we have no tty, termios, or the port does not exist,
 	 * then we can't set the parameters for this port.
 	 */
-	if (!tty || !tty->termios || port->type == PORT_UNKNOWN)
+	if (!tty || !tty->termios || uport->type == PORT_UNKNOWN)
 		return;
 
 	termios = tty->termios;
@@ -447,16 +444,16 @@ uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
 	 * Set flags based on termios cflag
 	 */
 	if (termios->c_cflag & CRTSCTS)
-		state->info.flags |= UIF_CTS_FLOW;
+		set_bit(ASYNCB_CTS_FLOW, &port->flags);
 	else
-		state->info.flags &= ~UIF_CTS_FLOW;
+		clear_bit(ASYNCB_CTS_FLOW, &port->flags);
 
 	if (termios->c_cflag & CLOCAL)
-		state->info.flags &= ~UIF_CHECK_CD;
+		clear_bit(ASYNCB_CHECK_CD, &port->flags);
 	else
-		state->info.flags |= UIF_CHECK_CD;
+		set_bit(ASYNCB_CHECK_CD, &port->flags);
 
-	port->ops->set_termios(port, termios, old_termios);
+	uport->ops->set_termios(uport, termios, old_termios);
 }
 
 static inline int
@@ -482,7 +479,7 @@ static int uart_put_char(struct tty_struct *tty, unsigned char ch)
 {
 	struct uart_state *state = tty->driver_data;
 
-	return __uart_put_char(state->port, &state->info.xmit, ch);
+	return __uart_put_char(state->uart_port, &state->xmit, ch);
 }
 
 static void uart_flush_chars(struct tty_struct *tty)
@@ -508,8 +505,8 @@ uart_write(struct tty_struct *tty, const unsigned char *buf, int count)
 		return -EL3HLT;
 	}
 
-	port = state->port;
-	circ = &state->info.xmit;
+	port = state->uart_port;
+	circ = &state->xmit;
 
 	if (!circ->buf)
 		return 0;
@@ -539,9 +536,9 @@ static int uart_write_room(struct tty_struct *tty)
 	unsigned long flags;
 	int ret;
 
-	spin_lock_irqsave(&state->port->lock, flags);
-	ret = uart_circ_chars_free(&state->info.xmit);
-	spin_unlock_irqrestore(&state->port->lock, flags);
+	spin_lock_irqsave(&state->uart_port->lock, flags);
+	ret = uart_circ_chars_free(&state->xmit);
+	spin_unlock_irqrestore(&state->uart_port->lock, flags);
 	return ret;
 }
 
@@ -551,9 +548,9 @@ static int uart_chars_in_buffer(struct tty_struct *tty)
 	unsigned long flags;
 	int ret;
 
-	spin_lock_irqsave(&state->port->lock, flags);
-	ret = uart_circ_chars_pending(&state->info.xmit);
-	spin_unlock_irqrestore(&state->port->lock, flags);
+	spin_lock_irqsave(&state->uart_port->lock, flags);
+	ret = uart_circ_chars_pending(&state->xmit);
+	spin_unlock_irqrestore(&state->uart_port->lock, flags);
 	return ret;
 }
 
@@ -572,11 +569,11 @@ static void uart_flush_buffer(struct tty_struct *tty)
 		return;
 	}
 
-	port = state->port;
+	port = state->uart_port;
 	pr_debug("uart_flush_buffer(%d) called\n", tty->index);
 
 	spin_lock_irqsave(&port->lock, flags);
-	uart_circ_clear(&state->info.xmit);
+	uart_circ_clear(&state->xmit);
 	if (port->ops->flush_buffer)
 		port->ops->flush_buffer(port);
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -590,7 +587,7 @@ static void uart_flush_buffer(struct tty_struct *tty)
 static void uart_send_xchar(struct tty_struct *tty, char ch)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->port;
+	struct uart_port *port = state->uart_port;
 	unsigned long flags;
 
 	if (port->ops->send_xchar)
@@ -613,13 +610,13 @@ static void uart_throttle(struct tty_struct *tty)
 		uart_send_xchar(tty, STOP_CHAR(tty));
 
 	if (tty->termios->c_cflag & CRTSCTS)
-		uart_clear_mctrl(state->port, TIOCM_RTS);
+		uart_clear_mctrl(state->uart_port, TIOCM_RTS);
 }
 
 static void uart_unthrottle(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->port;
+	struct uart_port *port = state->uart_port;
 
 	if (I_IXOFF(tty)) {
 		if (port->x_char)
@@ -635,35 +632,36 @@ static void uart_unthrottle(struct tty_struct *tty)
 static int uart_get_info(struct uart_state *state,
 			 struct serial_struct __user *retinfo)
 {
-	struct uart_port *port = state->port;
+	struct uart_port *uport = state->uart_port;
+	struct tty_port *port = &state->port;
 	struct serial_struct tmp;
 
 	memset(&tmp, 0, sizeof(tmp));
 
 	/* Ensure the state we copy is consistent and no hardware changes
 	   occur as we go */
-	mutex_lock(&state->mutex);
+	mutex_lock(&port->mutex);
 
-	tmp.type	    = port->type;
-	tmp.line	    = port->line;
-	tmp.port	    = port->iobase;
+	tmp.type	    = uport->type;
+	tmp.line	    = uport->line;
+	tmp.port	    = uport->iobase;
 	if (HIGH_BITS_OFFSET)
-		tmp.port_high = (long) port->iobase >> HIGH_BITS_OFFSET;
-	tmp.irq		    = port->irq;
-	tmp.flags	    = port->flags;
-	tmp.xmit_fifo_size  = port->fifosize;
-	tmp.baud_base	    = port->uartclk / 16;
-	tmp.close_delay	    = state->close_delay / 10;
-	tmp.closing_wait    = state->closing_wait == USF_CLOSING_WAIT_NONE ?
+		tmp.port_high = (long) uport->iobase >> HIGH_BITS_OFFSET;
+	tmp.irq		    = uport->irq;
+	tmp.flags	    = uport->flags;
+	tmp.xmit_fifo_size  = uport->fifosize;
+	tmp.baud_base	    = uport->uartclk / 16;
+	tmp.close_delay	    = port->close_delay / 10;
+	tmp.closing_wait    = port->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
 				ASYNC_CLOSING_WAIT_NONE :
-				state->closing_wait / 10;
-	tmp.custom_divisor  = port->custom_divisor;
-	tmp.hub6	    = port->hub6;
-	tmp.io_type         = port->iotype;
-	tmp.iomem_reg_shift = port->regshift;
-	tmp.iomem_base      = (void *)(unsigned long)port->mapbase;
+				port->closing_wait / 10;
+	tmp.custom_divisor  = uport->custom_divisor;
+	tmp.hub6	    = uport->hub6;
+	tmp.io_type         = uport->iotype;
+	tmp.iomem_reg_shift = uport->regshift;
+	tmp.iomem_base      = (void *)(unsigned long)uport->mapbase;
 
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 
 	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
 		return -EFAULT;
@@ -674,7 +672,8 @@ static int uart_set_info(struct uart_state *state,
 			 struct serial_struct __user *newinfo)
 {
 	struct serial_struct new_serial;
-	struct uart_port *port = state->port;
+	struct uart_port *uport = state->uart_port;
+	struct tty_port *port = &state->port;
 	unsigned long new_port;
 	unsigned int change_irq, change_port, closing_wait;
 	unsigned int old_custom_divisor, close_delay;
@@ -691,58 +690,58 @@ static int uart_set_info(struct uart_state *state,
 	new_serial.irq = irq_canonicalize(new_serial.irq);
 	close_delay = new_serial.close_delay * 10;
 	closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
-			USF_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
+			ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
 
 	/*
-	 * This semaphore protects state->count.  It is also
+	 * This semaphore protects port->count.  It is also
 	 * very useful to prevent opens.  Also, take the
 	 * port configuration semaphore to make sure that a
 	 * module insertion/removal doesn't change anything
 	 * under us.
 	 */
-	mutex_lock(&state->mutex);
+	mutex_lock(&port->mutex);
 
-	change_irq  = !(port->flags & UPF_FIXED_PORT)
-		&& new_serial.irq != port->irq;
+	change_irq  = !(uport->flags & UPF_FIXED_PORT)
+		&& new_serial.irq != uport->irq;
 
 	/*
 	 * Since changing the 'type' of the port changes its resource
 	 * allocations, we should treat type changes the same as
 	 * IO port changes.
 	 */
-	change_port = !(port->flags & UPF_FIXED_PORT)
-		&& (new_port != port->iobase ||
-		    (unsigned long)new_serial.iomem_base != port->mapbase ||
-		    new_serial.hub6 != port->hub6 ||
-		    new_serial.io_type != port->iotype ||
-		    new_serial.iomem_reg_shift != port->regshift ||
-		    new_serial.type != port->type);
-
-	old_flags = port->flags;
+	change_port = !(uport->flags & UPF_FIXED_PORT)
+		&& (new_port != uport->iobase ||
+		    (unsigned long)new_serial.iomem_base != uport->mapbase ||
+		    new_serial.hub6 != uport->hub6 ||
+		    new_serial.io_type != uport->iotype ||
+		    new_serial.iomem_reg_shift != uport->regshift ||
+		    new_serial.type != uport->type);
+
+	old_flags = uport->flags;
 	new_flags = new_serial.flags;
-	old_custom_divisor = port->custom_divisor;
+	old_custom_divisor = uport->custom_divisor;
 
 	if (!capable(CAP_SYS_ADMIN)) {
 		retval = -EPERM;
 		if (change_irq || change_port ||
-		    (new_serial.baud_base != port->uartclk / 16) ||
-		    (close_delay != state->close_delay) ||
-		    (closing_wait != state->closing_wait) ||
+		    (new_serial.baud_base != uport->uartclk / 16) ||
+		    (close_delay != port->close_delay) ||
+		    (closing_wait != port->closing_wait) ||
 		    (new_serial.xmit_fifo_size &&
-		     new_serial.xmit_fifo_size != port->fifosize) ||
+		     new_serial.xmit_fifo_size != uport->fifosize) ||
 		    (((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0))
 			goto exit;
-		port->flags = ((port->flags & ~UPF_USR_MASK) |
+		uport->flags = ((uport->flags & ~UPF_USR_MASK) |
 			       (new_flags & UPF_USR_MASK));
-		port->custom_divisor = new_serial.custom_divisor;
+		uport->custom_divisor = new_serial.custom_divisor;
 		goto check_and_exit;
 	}
 
 	/*
 	 * Ask the low level driver to verify the settings.
 	 */
-	if (port->ops->verify_port)
-		retval = port->ops->verify_port(port, &new_serial);
+	if (uport->ops->verify_port)
+		retval = uport->ops->verify_port(uport, &new_serial);
 
 	if ((new_serial.irq >= nr_irqs) || (new_serial.irq < 0) ||
 	    (new_serial.baud_base < 9600))
@@ -757,7 +756,7 @@ static int uart_set_info(struct uart_state *state,
 		/*
 		 * Make sure that we are the sole user of this port.
 		 */
-		if (uart_users(state) > 1)
+		if (tty_port_users(port) > 1)
 			goto exit;
 
 		/*
@@ -771,31 +770,31 @@ static int uart_set_info(struct uart_state *state,
 		unsigned long old_iobase, old_mapbase;
 		unsigned int old_type, old_iotype, old_hub6, old_shift;
 
-		old_iobase = port->iobase;
-		old_mapbase = port->mapbase;
-		old_type = port->type;
-		old_hub6 = port->hub6;
-		old_iotype = port->iotype;
-		old_shift = port->regshift;
+		old_iobase = uport->iobase;
+		old_mapbase = uport->mapbase;
+		old_type = uport->type;
+		old_hub6 = uport->hub6;
+		old_iotype = uport->iotype;
+		old_shift = uport->regshift;
 
 		/*
 		 * Free and release old regions
 		 */
 		if (old_type != PORT_UNKNOWN)
-			port->ops->release_port(port);
+			uport->ops->release_port(uport);
 
-		port->iobase = new_port;
-		port->type = new_serial.type;
-		port->hub6 = new_serial.hub6;
-		port->iotype = new_serial.io_type;
-		port->regshift = new_serial.iomem_reg_shift;
-		port->mapbase = (unsigned long)new_serial.iomem_base;
+		uport->iobase = new_port;
+		uport->type = new_serial.type;
+		uport->hub6 = new_serial.hub6;
+		uport->iotype = new_serial.io_type;
+		uport->regshift = new_serial.iomem_reg_shift;
+		uport->mapbase = (unsigned long)new_serial.iomem_base;
 
 		/*
 		 * Claim and map the new regions
 		 */
-		if (port->type != PORT_UNKNOWN) {
-			retval = port->ops->request_port(port);
+		if (uport->type != PORT_UNKNOWN) {
+			retval = uport->ops->request_port(uport);
 		} else {
 			/* Always success - Jean II */
 			retval = 0;
@@ -806,19 +805,19 @@ static int uart_set_info(struct uart_state *state,
 		 * new port, try to restore the old settings.
 		 */
 		if (retval && old_type != PORT_UNKNOWN) {
-			port->iobase = old_iobase;
-			port->type = old_type;
-			port->hub6 = old_hub6;
-			port->iotype = old_iotype;
-			port->regshift = old_shift;
-			port->mapbase = old_mapbase;
-			retval = port->ops->request_port(port);
+			uport->iobase = old_iobase;
+			uport->type = old_type;
+			uport->hub6 = old_hub6;
+			uport->iotype = old_iotype;
+			uport->regshift = old_shift;
+			uport->mapbase = old_mapbase;
+			retval = uport->ops->request_port(uport);
 			/*
 			 * If we failed to restore the old settings,
 			 * we fail like this.
 			 */
 			if (retval)
-				port->type = PORT_UNKNOWN;
+				uport->type = PORT_UNKNOWN;
 
 			/*
 			 * We failed anyway.
@@ -830,45 +829,45 @@ static int uart_set_info(struct uart_state *state,
 	}
 
 	if (change_irq)
-		port->irq      = new_serial.irq;
-	if (!(port->flags & UPF_FIXED_PORT))
-		port->uartclk  = new_serial.baud_base * 16;
-	port->flags            = (port->flags & ~UPF_CHANGE_MASK) |
+		uport->irq      = new_serial.irq;
+	if (!(uport->flags & UPF_FIXED_PORT))
+		uport->uartclk  = new_serial.baud_base * 16;
+	uport->flags            = (uport->flags & ~UPF_CHANGE_MASK) |
 				 (new_flags & UPF_CHANGE_MASK);
-	port->custom_divisor   = new_serial.custom_divisor;
-	state->close_delay     = close_delay;
-	state->closing_wait    = closing_wait;
+	uport->custom_divisor   = new_serial.custom_divisor;
+	port->close_delay     = close_delay;
+	port->closing_wait    = closing_wait;
 	if (new_serial.xmit_fifo_size)
-		port->fifosize = new_serial.xmit_fifo_size;
-	if (state->info.port.tty)
-		state->info.port.tty->low_latency =
-			(port->flags & UPF_LOW_LATENCY) ? 1 : 0;
+		uport->fifosize = new_serial.xmit_fifo_size;
+	if (port->tty)
+		port->tty->low_latency =
+			(uport->flags & UPF_LOW_LATENCY) ? 1 : 0;
 
  check_and_exit:
 	retval = 0;
-	if (port->type == PORT_UNKNOWN)
+	if (uport->type == PORT_UNKNOWN)
 		goto exit;
-	if (state->info.flags & UIF_INITIALIZED) {
-		if (((old_flags ^ port->flags) & UPF_SPD_MASK) ||
-		    old_custom_divisor != port->custom_divisor) {
+	if (port->flags & ASYNC_INITIALIZED) {
+		if (((old_flags ^ uport->flags) & UPF_SPD_MASK) ||
+		    old_custom_divisor != uport->custom_divisor) {
 			/*
 			 * If they're setting up a custom divisor or speed,
 			 * instead of clearing it, then bitch about it. No
 			 * need to rate-limit; it's CAP_SYS_ADMIN only.
 			 */
-			if (port->flags & UPF_SPD_MASK) {
+			if (uport->flags & UPF_SPD_MASK) {
 				char buf[64];
 				printk(KERN_NOTICE
 				       "%s sets custom speed on %s. This "
 				       "is deprecated.\n", current->comm,
-				       tty_name(state->info.port.tty, buf));
+				       tty_name(port->tty, buf));
 			}
 			uart_change_speed(state, NULL);
 		}
 	} else
 		retval = uart_startup(state, 1);
  exit:
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 	return retval;
 }
 
@@ -880,10 +879,11 @@ static int uart_set_info(struct uart_state *state,
 static int uart_get_lsr_info(struct uart_state *state,
 			     unsigned int __user *value)
 {
-	struct uart_port *port = state->port;
+	struct uart_port *uport = state->uart_port;
+	struct tty_port *port = &state->port;
 	unsigned int result;
 
-	result = port->ops->tx_empty(port);
+	result = uport->ops->tx_empty(uport);
 
 	/*
 	 * If we're about to load something into the transmit
@@ -891,9 +891,9 @@ static int uart_get_lsr_info(struct uart_state *state,
 	 * avoid a race condition (depending on when the transmit
 	 * interrupt happens).
 	 */
-	if (port->x_char ||
-	    ((uart_circ_chars_pending(&state->info.xmit) > 0) &&
-	     !state->info.port.tty->stopped && !state->info.port.tty->hw_stopped))
+	if (uport->x_char ||
+	    ((uart_circ_chars_pending(&state->xmit) > 0) &&
+	     !port->tty->stopped && !port->tty->hw_stopped))
 		result &= ~TIOCSER_TEMT;
 
 	return put_user(result, value);
@@ -902,19 +902,20 @@ static int uart_get_lsr_info(struct uart_state *state,
 static int uart_tiocmget(struct tty_struct *tty, struct file *file)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->port;
+	struct tty_port *port = &state->port;
+	struct uart_port *uport = state->uart_port;
 	int result = -EIO;
 
-	mutex_lock(&state->mutex);
+	mutex_lock(&port->mutex);
 	if ((!file || !tty_hung_up_p(file)) &&
 	    !(tty->flags & (1 << TTY_IO_ERROR))) {
-		result = port->mctrl;
+		result = uport->mctrl;
 
-		spin_lock_irq(&port->lock);
-		result |= port->ops->get_mctrl(port);
-		spin_unlock_irq(&port->lock);
+		spin_lock_irq(&uport->lock);
+		result |= uport->ops->get_mctrl(uport);
+		spin_unlock_irq(&uport->lock);
 	}
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 
 	return result;
 }
@@ -924,36 +925,39 @@ uart_tiocmset(struct tty_struct *tty, struct file *file,
 	      unsigned int set, unsigned int clear)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->port;
+	struct uart_port *uport = state->uart_port;
+	struct tty_port *port = &state->port;
 	int ret = -EIO;
 
-	mutex_lock(&state->mutex);
+	mutex_lock(&port->mutex);
 	if ((!file || !tty_hung_up_p(file)) &&
 	    !(tty->flags & (1 << TTY_IO_ERROR))) {
-		uart_update_mctrl(port, set, clear);
+		uart_update_mctrl(uport, set, clear);
 		ret = 0;
 	}
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 	return ret;
 }
 
 static int uart_break_ctl(struct tty_struct *tty, int break_state)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->port;
+	struct tty_port *port = &state->port;
+	struct uart_port *uport = state->uart_port;
 
-	mutex_lock(&state->mutex);
+	mutex_lock(&port->mutex);
 
-	if (port->type != PORT_UNKNOWN)
-		port->ops->break_ctl(port, break_state);
+	if (uport->type != PORT_UNKNOWN)
+		uport->ops->break_ctl(uport, break_state);
 
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 	return 0;
 }
 
 static int uart_do_autoconfig(struct uart_state *state)
 {
-	struct uart_port *port = state->port;
+	struct uart_port *uport = state->uart_port;
+	struct tty_port *port = &state->port;
 	int flags, ret;
 
 	if (!capable(CAP_SYS_ADMIN))
@@ -964,33 +968,33 @@ static int uart_do_autoconfig(struct uart_state *state)
 	 * changing, and hence any extra opens of the port while
 	 * we're auto-configuring.
 	 */
-	if (mutex_lock_interruptible(&state->mutex))
+	if (mutex_lock_interruptible(&port->mutex))
 		return -ERESTARTSYS;
 
 	ret = -EBUSY;
-	if (uart_users(state) == 1) {
+	if (tty_port_users(port) == 1) {
 		uart_shutdown(state);
 
 		/*
 		 * If we already have a port type configured,
 		 * we must release its resources.
 		 */
-		if (port->type != PORT_UNKNOWN)
-			port->ops->release_port(port);
+		if (uport->type != PORT_UNKNOWN)
+			uport->ops->release_port(uport);
 
 		flags = UART_CONFIG_TYPE;
-		if (port->flags & UPF_AUTO_IRQ)
+		if (uport->flags & UPF_AUTO_IRQ)
 			flags |= UART_CONFIG_IRQ;
 
 		/*
 		 * This will claim the ports resources if
 		 * a port is found.
 		 */
-		port->ops->config_port(port, flags);
+		uport->ops->config_port(uport, flags);
 
 		ret = uart_startup(state, 1);
 	}
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 	return ret;
 }
 
@@ -999,11 +1003,15 @@ static int uart_do_autoconfig(struct uart_state *state)
  * - mask passed in arg for lines of interest
  *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
  * Caller should use TIOCGICOUNT to see which one it was
+ *
+ * FIXME: This wants extracting into a common all driver implementation
+ * of TIOCMWAIT using tty_port.
  */
 static int
 uart_wait_modem_status(struct uart_state *state, unsigned long arg)
 {
-	struct uart_port *port = state->port;
+	struct uart_port *uport = state->uart_port;
+	struct tty_port *port = &state->port;
 	DECLARE_WAITQUEUE(wait, current);
 	struct uart_icount cprev, cnow;
 	int ret;
@@ -1011,20 +1019,20 @@ uart_wait_modem_status(struct uart_state *state, unsigned long arg)
 	/*
 	 * note the counters on entry
 	 */
-	spin_lock_irq(&port->lock);
-	memcpy(&cprev, &port->icount, sizeof(struct uart_icount));
+	spin_lock_irq(&uport->lock);
+	memcpy(&cprev, &uport->icount, sizeof(struct uart_icount));
 
 	/*
 	 * Force modem status interrupts on
 	 */
-	port->ops->enable_ms(port);
-	spin_unlock_irq(&port->lock);
+	uport->ops->enable_ms(uport);
+	spin_unlock_irq(&uport->lock);
 
-	add_wait_queue(&state->info.delta_msr_wait, &wait);
+	add_wait_queue(&port->delta_msr_wait, &wait);
 	for (;;) {
-		spin_lock_irq(&port->lock);
-		memcpy(&cnow, &port->icount, sizeof(struct uart_icount));
-		spin_unlock_irq(&port->lock);
+		spin_lock_irq(&uport->lock);
+		memcpy(&cnow, &uport->icount, sizeof(struct uart_icount));
+		spin_unlock_irq(&uport->lock);
 
 		set_current_state(TASK_INTERRUPTIBLE);
 
@@ -1048,7 +1056,7 @@ uart_wait_modem_status(struct uart_state *state, unsigned long arg)
 	}
 
 	current->state = TASK_RUNNING;
-	remove_wait_queue(&state->info.delta_msr_wait, &wait);
+	remove_wait_queue(&port->delta_msr_wait, &wait);
 
 	return ret;
 }
@@ -1064,11 +1072,11 @@ static int uart_get_count(struct uart_state *state,
 {
 	struct serial_icounter_struct icount;
 	struct uart_icount cnow;
-	struct uart_port *port = state->port;
+	struct uart_port *uport = state->uart_port;
 
-	spin_lock_irq(&port->lock);
-	memcpy(&cnow, &port->icount, sizeof(struct uart_icount));
-	spin_unlock_irq(&port->lock);
+	spin_lock_irq(&uport->lock);
+	memcpy(&cnow, &uport->icount, sizeof(struct uart_icount));
+	spin_unlock_irq(&uport->lock);
 
 	icount.cts         = cnow.cts;
 	icount.dsr         = cnow.dsr;
@@ -1093,6 +1101,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
 	   unsigned long arg)
 {
 	struct uart_state *state = tty->driver_data;
+	struct tty_port *port = &state->port;
 	void __user *uarg = (void __user *)arg;
 	int ret = -ENOIOCTLCMD;
 
@@ -1143,7 +1152,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
 	if (ret != -ENOIOCTLCMD)
 		goto out;
 
-	mutex_lock(&state->mutex);
+	mutex_lock(&port->mutex);
 
 	if (tty_hung_up_p(filp)) {
 		ret = -EIO;
@@ -1160,14 +1169,14 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
 		break;
 
 	default: {
-		struct uart_port *port = state->port;
-		if (port->ops->ioctl)
-			ret = port->ops->ioctl(port, cmd, arg);
+		struct uart_port *uport = state->uart_port;
+		if (uport->ops->ioctl)
+			ret = uport->ops->ioctl(uport, cmd, arg);
 		break;
 	}
 	}
 out_up:
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 out:
 	return ret;
 }
@@ -1175,10 +1184,10 @@ out:
 static void uart_set_ldisc(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->port;
+	struct uart_port *uport = state->uart_port;
 
-	if (port->ops->set_ldisc)
-		port->ops->set_ldisc(port);
+	if (uport->ops->set_ldisc)
+		uport->ops->set_ldisc(uport);
 }
 
 static void uart_set_termios(struct tty_struct *tty,
@@ -1207,7 +1216,7 @@ static void uart_set_termios(struct tty_struct *tty,
 
 	/* Handle transition to B0 status */
 	if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD))
-		uart_clear_mctrl(state->port, TIOCM_RTS | TIOCM_DTR);
+		uart_clear_mctrl(state->uart_port, TIOCM_RTS | TIOCM_DTR);
 
 	/* Handle transition away from B0 status */
 	if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) {
@@ -1215,25 +1224,25 @@ static void uart_set_termios(struct tty_struct *tty,
 		if (!(cflag & CRTSCTS) ||
 		    !test_bit(TTY_THROTTLED, &tty->flags))
 			mask |= TIOCM_RTS;
-		uart_set_mctrl(state->port, mask);
+		uart_set_mctrl(state->uart_port, mask);
 	}
 
 	/* Handle turning off CRTSCTS */
 	if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) {
-		spin_lock_irqsave(&state->port->lock, flags);
+		spin_lock_irqsave(&state->uart_port->lock, flags);
 		tty->hw_stopped = 0;
 		__uart_start(tty);
-		spin_unlock_irqrestore(&state->port->lock, flags);
+		spin_unlock_irqrestore(&state->uart_port->lock, flags);
 	}
 
 	/* Handle turning on CRTSCTS */
 	if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) {
-		spin_lock_irqsave(&state->port->lock, flags);
-		if (!(state->port->ops->get_mctrl(state->port) & TIOCM_CTS)) {
+		spin_lock_irqsave(&state->uart_port->lock, flags);
+		if (!(state->uart_port->ops->get_mctrl(state->uart_port) & TIOCM_CTS)) {
 			tty->hw_stopped = 1;
-			state->port->ops->stop_tx(state->port);
+			state->uart_port->ops->stop_tx(state->uart_port);
 		}
-		spin_unlock_irqrestore(&state->port->lock, flags);
+		spin_unlock_irqrestore(&state->uart_port->lock, flags);
 	}
 #if 0
 	/*
@@ -1244,7 +1253,7 @@ static void uart_set_termios(struct tty_struct *tty,
 	 */
 	if (!(old_termios->c_cflag & CLOCAL) &&
 	    (tty->termios->c_cflag & CLOCAL))
-		wake_up_interruptible(&info->port.open_wait);
+		wake_up_interruptible(&state->uart_port.open_wait);
 #endif
 }
 
@@ -1256,40 +1265,39 @@ static void uart_set_termios(struct tty_struct *tty,
 static void uart_close(struct tty_struct *tty, struct file *filp)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port;
+	struct tty_port *port;
+	struct uart_port *uport;
 
 	BUG_ON(!kernel_locked());
 
-	if (!state || !state->port)
-		return;
+	uport = state->uart_port;
+	port = &state->port;
 
-	port = state->port;
+	pr_debug("uart_close(%d) called\n", uport->line);
 
-	pr_debug("uart_close(%d) called\n", port->line);
-
-	mutex_lock(&state->mutex);
+	mutex_lock(&port->mutex);
 
 	if (tty_hung_up_p(filp))
 		goto done;
 
-	if ((tty->count == 1) && (state->count != 1)) {
+	if ((tty->count == 1) && (port->count != 1)) {
 		/*
 		 * Uh, oh.  tty->count is 1, which means that the tty
-		 * structure will be freed.  state->count should always
+		 * structure will be freed.  port->count should always
 		 * be one in these conditions.  If it's greater than
 		 * one, we've got real problems, since it means the
 		 * serial port won't be shutdown.
 		 */
 		printk(KERN_ERR "uart_close: bad serial port count; tty->count is 1, "
-		       "state->count is %d\n", state->count);
-		state->count = 1;
+		       "port->count is %d\n", port->count);
+		port->count = 1;
 	}
-	if (--state->count < 0) {
+	if (--port->count < 0) {
 		printk(KERN_ERR "uart_close: bad serial port count for %s: %d\n",
-		       tty->name, state->count);
-		state->count = 0;
+		       tty->name, port->count);
+		port->count = 0;
 	}
-	if (state->count)
+	if (port->count)
 		goto done;
 
 	/*
@@ -1299,24 +1307,24 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 	 */
 	tty->closing = 1;
 
-	if (state->closing_wait != USF_CLOSING_WAIT_NONE)
-		tty_wait_until_sent(tty, msecs_to_jiffies(state->closing_wait));
+	if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
+		tty_wait_until_sent(tty, msecs_to_jiffies(port->closing_wait));
 
 	/*
 	 * At this point, we stop accepting input.  To do this, we
 	 * disable the receive line status interrupts.
 	 */
-	if (state->info.flags & UIF_INITIALIZED) {
+	if (port->flags & ASYNC_INITIALIZED) {
 		unsigned long flags;
 		spin_lock_irqsave(&port->lock, flags);
-		port->ops->stop_rx(port);
+		uport->ops->stop_rx(uport);
 		spin_unlock_irqrestore(&port->lock, flags);
 		/*
 		 * Before we drop DTR, make sure the UART transmitter
 		 * has completely drained; this is especially
 		 * important if there is a transmit FIFO!
 		 */
-		uart_wait_until_sent(tty, port->timeout);
+		uart_wait_until_sent(tty, uport->timeout);
 	}
 
 	uart_shutdown(state);
@@ -1325,29 +1333,29 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 	tty_ldisc_flush(tty);
 
 	tty->closing = 0;
-	state->info.port.tty = NULL;
+	tty_port_tty_set(port, NULL);
 
-	if (state->info.port.blocked_open) {
-		if (state->close_delay)
-			msleep_interruptible(state->close_delay);
-	} else if (!uart_console(port)) {
+	if (port->blocked_open) {
+		if (port->close_delay)
+			msleep_interruptible(port->close_delay);
+	} else if (!uart_console(uport)) {
 		uart_change_pm(state, 3);
 	}
 
 	/*
 	 * Wake up anyone trying to open this port.
 	 */
-	state->info.flags &= ~UIF_NORMAL_ACTIVE;
-	wake_up_interruptible(&state->info.port.open_wait);
+	clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
+	wake_up_interruptible(&port->open_wait);
 
- done:
-	mutex_unlock(&state->mutex);
+done:
+	mutex_unlock(&port->mutex);
 }
 
 static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_port *port = state->port;
+	struct uart_port *port = state->uart_port;
 	unsigned long char_time, expire;
 
 	if (port->type == PORT_UNKNOWN || port->fifosize == 0)
@@ -1412,22 +1420,22 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
 static void uart_hangup(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
-	struct uart_info *info = &state->info;
+	struct tty_port *port = &state->port;
 
 	BUG_ON(!kernel_locked());
-	pr_debug("uart_hangup(%d)\n", state->port->line);
+	pr_debug("uart_hangup(%d)\n", state->uart_port->line);
 
-	mutex_lock(&state->mutex);
-	if (info->flags & UIF_NORMAL_ACTIVE) {
+	mutex_lock(&port->mutex);
+	if (port->flags & ASYNC_NORMAL_ACTIVE) {
 		uart_flush_buffer(tty);
 		uart_shutdown(state);
-		state->count = 0;
-		info->flags &= ~UIF_NORMAL_ACTIVE;
-		info->port.tty = NULL;
-		wake_up_interruptible(&info->port.open_wait);
-		wake_up_interruptible(&info->delta_msr_wait);
+		port->count = 0;
+		clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
+		tty_port_tty_set(port, NULL);
+		wake_up_interruptible(&port->open_wait);
+		wake_up_interruptible(&port->delta_msr_wait);
 	}
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 }
 
 /*
@@ -1438,8 +1446,8 @@ static void uart_hangup(struct tty_struct *tty)
  */
 static void uart_update_termios(struct uart_state *state)
 {
-	struct tty_struct *tty = state->info.port.tty;
-	struct uart_port *port = state->port;
+	struct tty_struct *tty = state->port.tty;
+	struct uart_port *port = state->uart_port;
 
 	if (uart_console(port) && port->cons->cflag) {
 		tty->termios->c_cflag = port->cons->cflag;
@@ -1473,27 +1481,27 @@ static int
 uart_block_til_ready(struct file *filp, struct uart_state *state)
 {
 	DECLARE_WAITQUEUE(wait, current);
-	struct uart_info *info = &state->info;
-	struct uart_port *port = state->port;
+	struct uart_port *uport = state->uart_port;
+	struct tty_port *port = &state->port;
 	unsigned int mctrl;
 
-	info->port.blocked_open++;
-	state->count--;
+	port->blocked_open++;
+	port->count--;
 
-	add_wait_queue(&info->port.open_wait, &wait);
+	add_wait_queue(&port->open_wait, &wait);
 	while (1) {
 		set_current_state(TASK_INTERRUPTIBLE);
 
 		/*
 		 * If we have been hung up, tell userspace/restart open.
 		 */
-		if (tty_hung_up_p(filp) || info->port.tty == NULL)
+		if (tty_hung_up_p(filp) || port->tty == NULL)
 			break;
 
 		/*
 		 * If the port has been closed, tell userspace/restart open.
 		 */
-		if (!(info->flags & UIF_INITIALIZED))
+		if (!(port->flags & ASYNC_INITIALIZED))
 			break;
 
 		/*
@@ -1506,8 +1514,8 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
 		 * have set TTY_IO_ERROR for a non-existant port.
 		 */
 		if ((filp->f_flags & O_NONBLOCK) ||
-		    (info->port.tty->termios->c_cflag & CLOCAL) ||
-		    (info->port.tty->flags & (1 << TTY_IO_ERROR)))
+		    (port->tty->termios->c_cflag & CLOCAL) ||
+		    (port->tty->flags & (1 << TTY_IO_ERROR)))
 			break;
 
 		/*
@@ -1515,37 +1523,37 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
 		 * not set RTS here - we want to make sure we catch
 		 * the data from the modem.
 		 */
-		if (info->port.tty->termios->c_cflag & CBAUD)
-			uart_set_mctrl(port, TIOCM_DTR);
+		if (port->tty->termios->c_cflag & CBAUD)
+			uart_set_mctrl(uport, TIOCM_DTR);
 
 		/*
 		 * and wait for the carrier to indicate that the
 		 * modem is ready for us.
 		 */
-		spin_lock_irq(&port->lock);
-		port->ops->enable_ms(port);
-		mctrl = port->ops->get_mctrl(port);
-		spin_unlock_irq(&port->lock);
+		spin_lock_irq(&uport->lock);
+		uport->ops->enable_ms(uport);
+		mctrl = uport->ops->get_mctrl(uport);
+		spin_unlock_irq(&uport->lock);
 		if (mctrl & TIOCM_CAR)
 			break;
 
-		mutex_unlock(&state->mutex);
+		mutex_unlock(&port->mutex);
 		schedule();
-		mutex_lock(&state->mutex);
+		mutex_lock(&port->mutex);
 
 		if (signal_pending(current))
 			break;
 	}
 	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&info->port.open_wait, &wait);
+	remove_wait_queue(&port->open_wait, &wait);
 
-	state->count++;
-	info->port.blocked_open--;
+	port->count++;
+	port->blocked_open--;
 
 	if (signal_pending(current))
 		return -ERESTARTSYS;
 
-	if (!info->port.tty || tty_hung_up_p(filp))
+	if (!port->tty || tty_hung_up_p(filp))
 		return -EAGAIN;
 
 	return 0;
@@ -1554,24 +1562,26 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
 static struct uart_state *uart_get(struct uart_driver *drv, int line)
 {
 	struct uart_state *state;
+	struct tty_port *port;
 	int ret = 0;
 
 	state = drv->state + line;
-	if (mutex_lock_interruptible(&state->mutex)) {
+	port = &state->port;
+	if (mutex_lock_interruptible(&port->mutex)) {
 		ret = -ERESTARTSYS;
 		goto err;
 	}
 
-	state->count++;
-	if (!state->port || state->port->flags & UPF_DEAD) {
+	port->count++;
+	if (!state->uart_port || state->uart_port->flags & UPF_DEAD) {
 		ret = -ENXIO;
 		goto err_unlock;
 	}
 	return state;
 
  err_unlock:
-	state->count--;
-	mutex_unlock(&state->mutex);
+	port->count--;
+	mutex_unlock(&port->mutex);
  err:
 	return ERR_PTR(ret);
 }
@@ -1590,6 +1600,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
 {
 	struct uart_driver *drv = (struct uart_driver *)tty->driver->driver_state;
 	struct uart_state *state;
+	struct tty_port *port;
 	int retval, line = tty->index;
 
 	BUG_ON(!kernel_locked());
@@ -1606,16 +1617,18 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
 
 	/*
 	 * We take the semaphore inside uart_get to guarantee that we won't
-	 * be re-entered while allocating the info structure, or while we
+	 * be re-entered while allocating the state structure, or while we
 	 * request any IRQs that the driver may need.  This also has the nice
 	 * side-effect that it delays the action of uart_hangup, so we can
-	 * guarantee that info->port.tty will always contain something reasonable.
+	 * guarantee that state->port.tty will always contain something
+	 * reasonable.
 	 */
 	state = uart_get(drv, line);
 	if (IS_ERR(state)) {
 		retval = PTR_ERR(state);
 		goto fail;
 	}
+	port = &state->port;
 
 	/*
 	 * Once we set tty->driver_data here, we are guaranteed that
@@ -1623,25 +1636,25 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
 	 * Any failures from here onwards should not touch the count.
 	 */
 	tty->driver_data = state;
-	state->port->info = &state->info;
-	tty->low_latency = (state->port->flags & UPF_LOW_LATENCY) ? 1 : 0;
+	state->uart_port->state = state;
+	tty->low_latency = (state->uart_port->flags & UPF_LOW_LATENCY) ? 1 : 0;
 	tty->alt_speed = 0;
-	state->info.port.tty = tty;
+	tty_port_tty_set(port, tty);
 
 	/*
 	 * If the port is in the middle of closing, bail out now.
 	 */
 	if (tty_hung_up_p(filp)) {
 		retval = -EAGAIN;
-		state->count--;
-		mutex_unlock(&state->mutex);
+		port->count--;
+		mutex_unlock(&port->mutex);
 		goto fail;
 	}
 
 	/*
 	 * Make sure the device is in D0 state.
 	 */
-	if (state->count == 1)
+	if (port->count == 1)
 		uart_change_pm(state, 0);
 
 	/*
@@ -1654,18 +1667,18 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
 	 */
 	if (retval == 0)
 		retval = uart_block_til_ready(filp, state);
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 
 	/*
 	 * If this is the first open to succeed, adjust things to suit.
 	 */
-	if (retval == 0 && !(state->info.flags & UIF_NORMAL_ACTIVE)) {
-		state->info.flags |= UIF_NORMAL_ACTIVE;
+	if (retval == 0 && !(port->flags & ASYNC_NORMAL_ACTIVE)) {
+		set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
 
 		uart_update_termios(state);
 	}
 
- fail:
+fail:
 	return retval;
 }
 
@@ -1687,57 +1700,58 @@ static const char *uart_type(struct uart_port *port)
 static void uart_line_info(struct seq_file *m, struct uart_driver *drv, int i)
 {
 	struct uart_state *state = drv->state + i;
+	struct tty_port *port = &state->port;
 	int pm_state;
-	struct uart_port *port = state->port;
+	struct uart_port *uport = state->uart_port;
 	char stat_buf[32];
 	unsigned int status;
 	int mmio;
 
-	if (!port)
+	if (!uport)
 		return;
 
-	mmio = port->iotype >= UPIO_MEM;
+	mmio = uport->iotype >= UPIO_MEM;
 	seq_printf(m, "%d: uart:%s %s%08llX irq:%d",
-			port->line, uart_type(port),
+			uport->line, uart_type(uport),
 			mmio ? "mmio:0x" : "port:",
-			mmio ? (unsigned long long)port->mapbase
-			     : (unsigned long long) port->iobase,
-			port->irq);
+			mmio ? (unsigned long long)uport->mapbase
+			     : (unsigned long long)uport->iobase,
+			uport->irq);
 
-	if (port->type == PORT_UNKNOWN) {
+	if (uport->type == PORT_UNKNOWN) {
 		seq_putc(m, '\n');
 		return;
 	}
 
 	if (capable(CAP_SYS_ADMIN)) {
-		mutex_lock(&state->mutex);
+		mutex_lock(&port->mutex);
 		pm_state = state->pm_state;
 		if (pm_state)
 			uart_change_pm(state, 0);
-		spin_lock_irq(&port->lock);
-		status = port->ops->get_mctrl(port);
-		spin_unlock_irq(&port->lock);
+		spin_lock_irq(&uport->lock);
+		status = uport->ops->get_mctrl(uport);
+		spin_unlock_irq(&uport->lock);
 		if (pm_state)
 			uart_change_pm(state, pm_state);
-		mutex_unlock(&state->mutex);
+		mutex_unlock(&port->mutex);
 
 		seq_printf(m, " tx:%d rx:%d",
-				port->icount.tx, port->icount.rx);
-		if (port->icount.frame)
+				uport->icount.tx, uport->icount.rx);
+		if (uport->icount.frame)
 			seq_printf(m, " fe:%d",
-				port->icount.frame);
-		if (port->icount.parity)
+				uport->icount.frame);
+		if (uport->icount.parity)
 			seq_printf(m, " pe:%d",
-				port->icount.parity);
-		if (port->icount.brk)
+				uport->icount.parity);
+		if (uport->icount.brk)
 			seq_printf(m, " brk:%d",
-				port->icount.brk);
-		if (port->icount.overrun)
+				uport->icount.brk);
+		if (uport->icount.overrun)
 			seq_printf(m, " oe:%d",
-				port->icount.overrun);
+				uport->icount.overrun);
 
 #define INFOBIT(bit, str) \
-	if (port->mctrl & (bit)) \
+	if (uport->mctrl & (bit)) \
 		strncat(stat_buf, (str), sizeof(stat_buf) - \
 			strlen(stat_buf) - 2)
 #define STATBIT(bit, str) \
@@ -1958,7 +1972,7 @@ EXPORT_SYMBOL_GPL(uart_set_options);
 
 static void uart_change_pm(struct uart_state *state, int pm_state)
 {
-	struct uart_port *port = state->port;
+	struct uart_port *port = state->uart_port;
 
 	if (state->pm_state != pm_state) {
 		if (port->ops->pm)
@@ -1982,132 +1996,138 @@ static int serial_match_port(struct device *dev, void *data)
 	return dev->devt == devt; /* Actually, only one tty per port */
 }
 
-int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
+int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
 {
-	struct uart_state *state = drv->state + port->line;
+	struct uart_state *state = drv->state + uport->line;
+	struct tty_port *port = &state->port;
 	struct device *tty_dev;
-	struct uart_match match = {port, drv};
+	struct uart_match match = {uport, drv};
 
-	mutex_lock(&state->mutex);
+	mutex_lock(&port->mutex);
 
-	if (!console_suspend_enabled && uart_console(port)) {
+	if (!console_suspend_enabled && uart_console(uport)) {
 		/* we're going to avoid suspending serial console */
-		mutex_unlock(&state->mutex);
+		mutex_unlock(&port->mutex);
 		return 0;
 	}
 
-	tty_dev = device_find_child(port->dev, &match, serial_match_port);
+	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
 	if (device_may_wakeup(tty_dev)) {
-		enable_irq_wake(port->irq);
+		enable_irq_wake(uport->irq);
 		put_device(tty_dev);
-		mutex_unlock(&state->mutex);
+		mutex_unlock(&port->mutex);
 		return 0;
 	}
-	port->suspended = 1;
+	uport->suspended = 1;
 
-	if (state->info.flags & UIF_INITIALIZED) {
-		const struct uart_ops *ops = port->ops;
+	if (port->flags & ASYNC_INITIALIZED) {
+		const struct uart_ops *ops = uport->ops;
 		int tries;
 
-		state->info.flags = (state->info.flags & ~UIF_INITIALIZED)
-				     | UIF_SUSPENDED;
+		set_bit(ASYNCB_SUSPENDED, &port->flags);
+		clear_bit(ASYNCB_INITIALIZED, &port->flags);
 
-		spin_lock_irq(&port->lock);
-		ops->stop_tx(port);
-		ops->set_mctrl(port, 0);
-		ops->stop_rx(port);
-		spin_unlock_irq(&port->lock);
+		spin_lock_irq(&uport->lock);
+		ops->stop_tx(uport);
+		ops->set_mctrl(uport, 0);
+		ops->stop_rx(uport);
+		spin_unlock_irq(&uport->lock);
 
 		/*
 		 * Wait for the transmitter to empty.
 		 */
-		for (tries = 3; !ops->tx_empty(port) && tries; tries--)
+		for (tries = 3; !ops->tx_empty(uport) && tries; tries--)
 			msleep(10);
 		if (!tries)
 			printk(KERN_ERR "%s%s%s%d: Unable to drain "
 					"transmitter\n",
-			       port->dev ? dev_name(port->dev) : "",
-			       port->dev ? ": " : "",
+			       uport->dev ? dev_name(uport->dev) : "",
+			       uport->dev ? ": " : "",
 			       drv->dev_name,
-			       drv->tty_driver->name_base + port->line);
+			       drv->tty_driver->name_base + uport->line);
 
-		ops->shutdown(port);
+		ops->shutdown(uport);
 	}
 
 	/*
 	 * Disable the console device before suspending.
 	 */
-	if (uart_console(port))
-		console_stop(port->cons);
+	if (uart_console(uport))
+		console_stop(uport->cons);
 
 	uart_change_pm(state, 3);
 
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 
 	return 0;
 }
 
-int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
+int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 {
-	struct uart_state *state = drv->state + port->line;
+	struct uart_state *state = drv->state + uport->line;
+	struct tty_port *port = &state->port;
 	struct device *tty_dev;
-	struct uart_match match = {port, drv};
+	struct uart_match match = {uport, drv};
+	struct ktermios termios;
 
-	mutex_lock(&state->mutex);
+	mutex_lock(&port->mutex);
 
-	if (!console_suspend_enabled && uart_console(port)) {
+	if (!console_suspend_enabled && uart_console(uport)) {
 		/* no need to resume serial console, it wasn't suspended */
-		mutex_unlock(&state->mutex);
+		/*
+		 * First try to use the console cflag setting.
+		 */
+		memset(&termios, 0, sizeof(struct ktermios));
+		termios.c_cflag = uport->cons->cflag;
+		/*
+		 * If that's unset, use the tty termios setting.
+		 */
+		if (termios.c_cflag == 0)
+			termios = *state->port.tty->termios;
+		else {
+			termios.c_ispeed = termios.c_ospeed =
+				tty_termios_input_baud_rate(&termios);
+			termios.c_ispeed = termios.c_ospeed =
+				tty_termios_baud_rate(&termios);
+		}
+		uport->ops->set_termios(uport, &termios, NULL);
+		mutex_unlock(&port->mutex);
 		return 0;
 	}
 
-	tty_dev = device_find_child(port->dev, &match, serial_match_port);
-	if (!port->suspended && device_may_wakeup(tty_dev)) {
-		disable_irq_wake(port->irq);
-		mutex_unlock(&state->mutex);
+	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
+	if (!uport->suspended && device_may_wakeup(tty_dev)) {
+		disable_irq_wake(uport->irq);
+		mutex_unlock(&port->mutex);
 		return 0;
 	}
-	port->suspended = 0;
+	uport->suspended = 0;
 
 	/*
 	 * Re-enable the console device after suspending.
 	 */
-	if (uart_console(port)) {
-		struct ktermios termios;
-
-		/*
-		 * First try to use the console cflag setting.
-		 */
-		memset(&termios, 0, sizeof(struct ktermios));
-		termios.c_cflag = port->cons->cflag;
-
-		/*
-		 * If that's unset, use the tty termios setting.
-		 */
-		if (state->info.port.tty && termios.c_cflag == 0)
-			termios = *state->info.port.tty->termios;
-
+	if (uart_console(uport)) {
 		uart_change_pm(state, 0);
-		port->ops->set_termios(port, &termios, NULL);
-		console_start(port->cons);
+		uport->ops->set_termios(uport, &termios, NULL);
+		console_start(uport->cons);
 	}
 
-	if (state->info.flags & UIF_SUSPENDED) {
-		const struct uart_ops *ops = port->ops;
+	if (port->flags & ASYNC_SUSPENDED) {
+		const struct uart_ops *ops = uport->ops;
 		int ret;
 
 		uart_change_pm(state, 0);
-		spin_lock_irq(&port->lock);
-		ops->set_mctrl(port, 0);
-		spin_unlock_irq(&port->lock);
-		ret = ops->startup(port);
+		spin_lock_irq(&uport->lock);
+		ops->set_mctrl(uport, 0);
+		spin_unlock_irq(&uport->lock);
+		ret = ops->startup(uport);
 		if (ret == 0) {
 			uart_change_speed(state, NULL);
-			spin_lock_irq(&port->lock);
-			ops->set_mctrl(port, port->mctrl);
-			ops->start_tx(port);
-			spin_unlock_irq(&port->lock);
-			state->info.flags |= UIF_INITIALIZED;
+			spin_lock_irq(&uport->lock);
+			ops->set_mctrl(uport, uport->mctrl);
+			ops->start_tx(uport);
+			spin_unlock_irq(&uport->lock);
+			set_bit(ASYNCB_INITIALIZED, &port->flags);
 		} else {
 			/*
 			 * Failed to resume - maybe hardware went away?
@@ -2117,10 +2137,10 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
 			uart_shutdown(state);
 		}
 
-		state->info.flags &= ~UIF_SUSPENDED;
+		clear_bit(ASYNCB_SUSPENDED, &port->flags);
 	}
 
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 
 	return 0;
 }
@@ -2232,10 +2252,10 @@ static int uart_poll_init(struct tty_driver *driver, int line, char *options)
 	int parity = 'n';
 	int flow = 'n';
 
-	if (!state || !state->port)
+	if (!state || !state->uart_port)
 		return -1;
 
-	port = state->port;
+	port = state->uart_port;
 	if (!(port->ops->poll_get_char && port->ops->poll_put_char))
 		return -1;
 
@@ -2253,10 +2273,10 @@ static int uart_poll_get_char(struct tty_driver *driver, int line)
 	struct uart_state *state = drv->state + line;
 	struct uart_port *port;
 
-	if (!state || !state->port)
+	if (!state || !state->uart_port)
 		return -1;
 
-	port = state->port;
+	port = state->uart_port;
 	return port->ops->poll_get_char(port);
 }
 
@@ -2266,10 +2286,10 @@ static void uart_poll_put_char(struct tty_driver *driver, int line, char ch)
 	struct uart_state *state = drv->state + line;
 	struct uart_port *port;
 
-	if (!state || !state->port)
+	if (!state || !state->uart_port)
 		return;
 
-	port = state->port;
+	port = state->uart_port;
 	port->ops->poll_put_char(port, ch);
 }
 #endif
@@ -2360,14 +2380,12 @@ int uart_register_driver(struct uart_driver *drv)
 	 */
 	for (i = 0; i < drv->nr; i++) {
 		struct uart_state *state = drv->state + i;
+		struct tty_port *port = &state->port;
 
-		state->close_delay     = 500;	/* .5 seconds */
-		state->closing_wait    = 30000;	/* 30 seconds */
-		mutex_init(&state->mutex);
-
-		tty_port_init(&state->info.port);
-		init_waitqueue_head(&state->info.delta_msr_wait);
-		tasklet_init(&state->info.tlet, uart_tasklet_action,
+		tty_port_init(port);
+		port->close_delay     = 500;	/* .5 seconds */
+		port->closing_wait    = 30000;	/* 30 seconds */
+		tasklet_init(&state->tlet, uart_tasklet_action,
 			     (unsigned long)state);
 	}
 
@@ -2408,69 +2426,71 @@ struct tty_driver *uart_console_device(struct console *co, int *index)
 /**
  *	uart_add_one_port - attach a driver-defined port structure
  *	@drv: pointer to the uart low level driver structure for this port
- *	@port: uart port structure to use for this port.
+ *	@uport: uart port structure to use for this port.
  *
  *	This allows the driver to register its own uart_port structure
  *	with the core driver.  The main purpose is to allow the low
  *	level uart drivers to expand uart_port, rather than having yet
  *	more levels of structures.
  */
-int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
+int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
 {
 	struct uart_state *state;
+	struct tty_port *port;
 	int ret = 0;
 	struct device *tty_dev;
 
 	BUG_ON(in_interrupt());
 
-	if (port->line >= drv->nr)
+	if (uport->line >= drv->nr)
 		return -EINVAL;
 
-	state = drv->state + port->line;
+	state = drv->state + uport->line;
+	port = &state->port;
 
 	mutex_lock(&port_mutex);
-	mutex_lock(&state->mutex);
-	if (state->port) {
+	mutex_lock(&port->mutex);
+	if (state->uart_port) {
 		ret = -EINVAL;
 		goto out;
 	}
 
-	state->port = port;
+	state->uart_port = uport;
 	state->pm_state = -1;
 
-	port->cons = drv->cons;
-	port->info = &state->info;
+	uport->cons = drv->cons;
+	uport->state = state;
 
 	/*
 	 * If this port is a console, then the spinlock is already
 	 * initialised.
 	 */
-	if (!(uart_console(port) && (port->cons->flags & CON_ENABLED))) {
-		spin_lock_init(&port->lock);
-		lockdep_set_class(&port->lock, &port_lock_key);
+	if (!(uart_console(uport) && (uport->cons->flags & CON_ENABLED))) {
+		spin_lock_init(&uport->lock);
+		lockdep_set_class(&uport->lock, &port_lock_key);
 	}
 
-	uart_configure_port(drv, state, port);
+	uart_configure_port(drv, state, uport);
 
 	/*
 	 * Register the port whether it's detected or not.  This allows
 	 * setserial to be used to alter this ports parameters.
 	 */
-	tty_dev = tty_register_device(drv->tty_driver, port->line, port->dev);
+	tty_dev = tty_register_device(drv->tty_driver, uport->line, uport->dev);
 	if (likely(!IS_ERR(tty_dev))) {
 		device_init_wakeup(tty_dev, 1);
 		device_set_wakeup_enable(tty_dev, 0);
 	} else
 		printk(KERN_ERR "Cannot register tty device on line %d\n",
-		       port->line);
+		       uport->line);
 
 	/*
 	 * Ensure UPF_DEAD is not set.
 	 */
-	port->flags &= ~UPF_DEAD;
+	uport->flags &= ~UPF_DEAD;
 
  out:
-	mutex_unlock(&state->mutex);
+	mutex_unlock(&port->mutex);
 	mutex_unlock(&port_mutex);
 
 	return ret;
@@ -2479,22 +2499,22 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
 /**
  *	uart_remove_one_port - detach a driver defined port structure
  *	@drv: pointer to the uart low level driver structure for this port
- *	@port: uart port structure for this port
+ *	@uport: uart port structure for this port
  *
  *	This unhooks (and hangs up) the specified port structure from the
  *	core driver.  No further calls will be made to the low-level code
  *	for this port.
  */
-int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
+int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport)
 {
-	struct uart_state *state = drv->state + port->line;
-	struct uart_info *info;
+	struct uart_state *state = drv->state + uport->line;
+	struct tty_port *port = &state->port;
 
 	BUG_ON(in_interrupt());
 
-	if (state->port != port)
+	if (state->uart_port != uport)
 		printk(KERN_ALERT "Removing wrong port: %p != %p\n",
-			state->port, port);
+			state->uart_port, uport);
 
 	mutex_lock(&port_mutex);
 
@@ -2502,37 +2522,35 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
 	 * Mark the port "dead" - this prevents any opens from
 	 * succeeding while we shut down the port.
 	 */
-	mutex_lock(&state->mutex);
-	port->flags |= UPF_DEAD;
-	mutex_unlock(&state->mutex);
+	mutex_lock(&port->mutex);
+	uport->flags |= UPF_DEAD;
+	mutex_unlock(&port->mutex);
 
 	/*
 	 * Remove the devices from the tty layer
 	 */
-	tty_unregister_device(drv->tty_driver, port->line);
+	tty_unregister_device(drv->tty_driver, uport->line);
 
-	info = &state->info;
-	if (info && info->port.tty)
-		tty_vhangup(info->port.tty);
+	if (port->tty)
+		tty_vhangup(port->tty);
 
 	/*
 	 * Free the port IO and memory resources, if any.
 	 */
-	if (port->type != PORT_UNKNOWN)
-		port->ops->release_port(port);
+	if (uport->type != PORT_UNKNOWN)
+		uport->ops->release_port(uport);
 
 	/*
 	 * Indicate that there isn't a port here anymore.
 	 */
-	port->type = PORT_UNKNOWN;
+	uport->type = PORT_UNKNOWN;
 
 	/*
 	 * Kill the tasklet, and free resources.
 	 */
-	if (info)
-		tasklet_kill(&info->tlet);
+	tasklet_kill(&state->tlet);
 
-	state->port = NULL;
+	state->uart_port = NULL;
 	mutex_unlock(&port_mutex);
 
 	return 0;
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index ed4648b556c7..a3bb49031a7f 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -884,6 +884,7 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
 	PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"),  /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
 	PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
+	PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "COMpad2.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "COMpad4.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "COMpad2.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index 52db5cc3f900..2e71bbc04dac 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -154,7 +154,7 @@ static void ks8695uart_disable_ms(struct uart_port *port)
 static irqreturn_t ks8695uart_rx_chars(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	unsigned int status, ch, lsr, flg, max_count = 256;
 
 	status = UART_GET_LSR(port);		/* clears pending LSR interrupts */
@@ -210,7 +210,7 @@ ignore_char:
 static irqreturn_t ks8695uart_tx_chars(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 	unsigned int count;
 
 	if (port->x_char) {
@@ -266,7 +266,7 @@ static irqreturn_t ks8695uart_modem_status(int irq, void *dev_id)
 	if (status & URMS_URTERI)
 		port->icount.rng++;
 
-	wake_up_interruptible(&port->info->delta_msr_wait);
+	wake_up_interruptible(&port->state->port.delta_msr_wait);
 
 	return IRQ_HANDLED;
 }
diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
index a7bf024a8286..ea744707c4d6 100644
--- a/drivers/serial/serial_lh7a40x.c
+++ b/drivers/serial/serial_lh7a40x.c
@@ -138,7 +138,7 @@ static void lh7a40xuart_enable_ms (struct uart_port* port)
 
 static void lh7a40xuart_rx_chars (struct uart_port* port)
 {
-	struct tty_struct* tty = port->info->port.tty;
+	struct tty_struct* tty = port->state->port.tty;
 	int cbRxMax = 256;	/* (Gross) limit on receive */
 	unsigned int data;	/* Received data and status */
 	unsigned int flag;
@@ -184,7 +184,7 @@ static void lh7a40xuart_rx_chars (struct uart_port* port)
 
 static void lh7a40xuart_tx_chars (struct uart_port* port)
 {
-	struct circ_buf* xmit = &port->info->xmit;
+	struct circ_buf* xmit = &port->state->xmit;
 	int cbTxMax = port->fifosize;
 
 	if (port->x_char) {
@@ -241,7 +241,7 @@ static void lh7a40xuart_modem_status (struct uart_port* port)
 	if (delta & CTS)
 		uart_handle_cts_change (port, status & CTS);
 
-	wake_up_interruptible (&port->info->delta_msr_wait);
+	wake_up_interruptible (&port->state->port.delta_msr_wait);
 }
 
 static irqreturn_t lh7a40xuart_int (int irq, void* dev_id)
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 54dd16d66a4b..0f7cf4c453e6 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -272,7 +272,7 @@ static void serial_txx9_initialize(struct uart_port *port)
 static inline void
 receive_chars(struct uart_txx9_port *up, unsigned int *status)
 {
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned char ch;
 	unsigned int disr = *status;
 	int max_count = 256;
@@ -348,7 +348,7 @@ receive_chars(struct uart_txx9_port *up, unsigned int *status)
 
 static inline void transmit_chars(struct uart_txx9_port *up)
 {
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 	int count;
 
 	if (up->port.x_char) {
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 8e2feb563347..85119fb7cb50 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -272,7 +272,8 @@ static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
 		__raw_writew(data, PSCR);
 	}
 }
-#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
+#elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7763) || \
       defined(CONFIG_CPU_SUBTYPE_SH7780) || \
       defined(CONFIG_CPU_SUBTYPE_SH7785) || \
       defined(CONFIG_CPU_SUBTYPE_SH7786) || \
@@ -360,7 +361,7 @@ static inline int sci_rxroom(struct uart_port *port)
 
 static void sci_transmit_chars(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 	unsigned int stopped = uart_tx_stopped(port);
 	unsigned short status;
 	unsigned short ctrl;
@@ -425,7 +426,7 @@ static void sci_transmit_chars(struct uart_port *port)
 static inline void sci_receive_chars(struct uart_port *port)
 {
 	struct sci_port *sci_port = to_sci_port(port);
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	int i, count, copied = 0;
 	unsigned short status;
 	unsigned char flag;
@@ -545,7 +546,7 @@ static inline int sci_handle_errors(struct uart_port *port)
 {
 	int copied = 0;
 	unsigned short status = sci_in(port, SCxSR);
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 
 	if (status & SCxSR_ORER(port)) {
 		/* overrun error */
@@ -599,7 +600,7 @@ static inline int sci_handle_errors(struct uart_port *port)
 
 static inline int sci_handle_fifo_overrun(struct uart_port *port)
 {
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	int copied = 0;
 
 	if (port->type != PORT_SCIF)
@@ -622,7 +623,7 @@ static inline int sci_handle_breaks(struct uart_port *port)
 {
 	int copied = 0;
 	unsigned short status = sci_in(port, SCxSR);
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	struct sci_port *s = to_sci_port(port);
 
 	if (uart_handle_break(port))
@@ -662,10 +663,11 @@ static irqreturn_t sci_rx_interrupt(int irq, void *port)
 static irqreturn_t sci_tx_interrupt(int irq, void *ptr)
 {
 	struct uart_port *port = ptr;
+	unsigned long flags;
 
-	spin_lock_irq(&port->lock);
+	spin_lock_irqsave(&port->lock, flags);
 	sci_transmit_chars(port);
-	spin_unlock_irq(&port->lock);
+	spin_unlock_irqrestore(&port->lock, flags);
 
 	return IRQ_HANDLED;
 }
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 38072c15b845..3e2fcf93b42e 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -112,6 +112,13 @@
 #elif defined(CONFIG_H8S2678)
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7757)
+# define SCSPTR0 0xfe4b0020
+# define SCSPTR1 0xfe4b0020
+# define SCSPTR2 0xfe4b0020
+# define SCIF_ORER 0x0001
+# define SCSCR_INIT(port)	0x38
+# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763)
 # define SCSPTR0 0xffe00024 /* 16 bit SCIF */
 # define SCSPTR1 0xffe08024 /* 16 bit SCIF */
@@ -562,6 +569,16 @@ static inline int sci_rxd_in(struct uart_port *port)
 		return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7757)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	if (port->mapbase == 0xfe4b0000)
+		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0;
+	if (port->mapbase == 0xfe4c0000)
+		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0;
+	if (port->mapbase == 0xfe4d0000)
+		return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0;
+}
 #elif defined(CONFIG_CPU_SUBTYPE_SH7760)
 static inline int sci_rxd_in(struct uart_port *port)
 {
diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c
index d5276c012f78..9794e0cd3dcc 100644
--- a/drivers/serial/sn_console.c
+++ b/drivers/serial/sn_console.c
@@ -469,9 +469,9 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags)
 		return;
 	}
 
-	if (port->sc_port.info) {
+	if (port->sc_port.state) {
 		/* The serial_core stuffs are initilized, use them */
-		tty = port->sc_port.info->port.tty;
+		tty = port->sc_port.state->port.tty;
 	}
 	else {
 		/* Not registered yet - can't pass to tty layer.  */
@@ -550,9 +550,9 @@ static void sn_transmit_chars(struct sn_cons_port *port, int raw)
 
 	BUG_ON(!port->sc_is_asynch);
 
-	if (port->sc_port.info) {
+	if (port->sc_port.state) {
 		/* We're initilized, using serial core infrastructure */
-		xmit = &port->sc_port.info->xmit;
+		xmit = &port->sc_port.state->xmit;
 	} else {
 		/* Probably sn_sal_switch_to_asynch has been run but serial core isn't
 		 * initilized yet.  Just return.  Writes are going through
@@ -927,7 +927,7 @@ sn_sal_console_write(struct console *co, const char *s, unsigned count)
 	/* We can't look at the xmit buffer if we're not registered with serial core
 	 *  yet.  So only do the fancy recovery after registering
 	 */
-	if (!port->sc_port.info) {
+	if (!port->sc_port.state) {
 		/* Not yet registered with serial core - simple case */
 		puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count);
 		return;
@@ -936,8 +936,8 @@ sn_sal_console_write(struct console *co, const char *s, unsigned count)
 	/* somebody really wants this output, might be an
 	 * oops, kdb, panic, etc.  make sure they get it. */
 	if (spin_is_locked(&port->sc_port.lock)) {
-		int lhead = port->sc_port.info->xmit.head;
-		int ltail = port->sc_port.info->xmit.tail;
+		int lhead = port->sc_port.state->xmit.head;
+		int ltail = port->sc_port.state->xmit.tail;
 		int counter, got_lock = 0;
 
 		/*
@@ -962,13 +962,13 @@ sn_sal_console_write(struct console *co, const char *s, unsigned count)
 				break;
 			} else {
 				/* still locked */
-				if ((lhead != port->sc_port.info->xmit.head)
+				if ((lhead != port->sc_port.state->xmit.head)
 				    || (ltail !=
-					port->sc_port.info->xmit.tail)) {
+					port->sc_port.state->xmit.tail)) {
 					lhead =
-						port->sc_port.info->xmit.head;
+						port->sc_port.state->xmit.head;
 					ltail =
-						port->sc_port.info->xmit.tail;
+						port->sc_port.state->xmit.tail;
 					counter = 0;
 				}
 			}
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index 1df5325faab2..d548652dee50 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -184,8 +184,8 @@ static struct tty_struct *receive_chars(struct uart_port *port)
 {
 	struct tty_struct *tty = NULL;
 
-	if (port->info != NULL)		/* Unopened serial console */
-		tty = port->info->port.tty;
+	if (port->state != NULL)		/* Unopened serial console */
+		tty = port->state->port.tty;
 
 	if (sunhv_ops->receive_chars(port, tty))
 		sun_do_break();
@@ -197,10 +197,10 @@ static void transmit_chars(struct uart_port *port)
 {
 	struct circ_buf *xmit;
 
-	if (!port->info)
+	if (!port->state)
 		return;
 
-	xmit = &port->info->xmit;
+	xmit = &port->state->xmit;
 	if (uart_circ_empty(xmit) || uart_tx_stopped(port))
 		return;
 
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 0355efe115d9..d1ad34128635 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -117,8 +117,8 @@ receive_chars(struct uart_sunsab_port *up,
 	int count = 0;
 	int i;
 
-	if (up->port.info != NULL)		/* Unopened serial console */
-		tty = up->port.info->port.tty;
+	if (up->port.state != NULL)		/* Unopened serial console */
+		tty = up->port.state->port.tty;
 
 	/* Read number of BYTES (Character + Status) available. */
 	if (stat->sreg.isr0 & SAB82532_ISR0_RPF) {
@@ -229,7 +229,7 @@ static void sunsab_tx_idle(struct uart_sunsab_port *);
 static void transmit_chars(struct uart_sunsab_port *up,
 			   union sab82532_irq_status *stat)
 {
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 	int i;
 
 	if (stat->sreg.isr1 & SAB82532_ISR1_ALLS) {
@@ -297,7 +297,7 @@ static void check_status(struct uart_sunsab_port *up,
 		up->port.icount.dsr++;
 	}
 
-	wake_up_interruptible(&up->port.info->delta_msr_wait);
+	wake_up_interruptible(&up->port.state->port.delta_msr_wait);
 }
 
 static irqreturn_t sunsab_interrupt(int irq, void *dev_id)
@@ -429,7 +429,7 @@ static void sunsab_tx_idle(struct uart_sunsab_port *up)
 static void sunsab_start_tx(struct uart_port *port)
 {
 	struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 	int i;
 
 	up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 47c6837850b1..68d262b15749 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -311,7 +311,7 @@ static void sunsu_enable_ms(struct uart_port *port)
 static struct tty_struct *
 receive_chars(struct uart_sunsu_port *up, unsigned char *status)
 {
-	struct tty_struct *tty = up->port.info->port.tty;
+	struct tty_struct *tty = up->port.state->port.tty;
 	unsigned char ch, flag;
 	int max_count = 256;
 	int saw_console_brk = 0;
@@ -389,7 +389,7 @@ receive_chars(struct uart_sunsu_port *up, unsigned char *status)
 
 static void transmit_chars(struct uart_sunsu_port *up)
 {
-	struct circ_buf *xmit = &up->port.info->xmit;
+	struct circ_buf *xmit = &up->port.state->xmit;
 	int count;
 
 	if (up->port.x_char) {
@@ -441,7 +441,7 @@ static void check_modem_status(struct uart_sunsu_port *up)
 	if (status & UART_MSR_DCTS)
 		uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
 
-	wake_up_interruptible(&up->port.info->delta_msr_wait);
+	wake_up_interruptible(&up->port.state->port.delta_msr_wait);
 }
 
 static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id)
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index e09d3cebb4fb..ef693ae22e7f 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -328,9 +328,9 @@ sunzilog_receive_chars(struct uart_sunzilog_port *up,
 	unsigned char ch, r1, flag;
 
 	tty = NULL;
-	if (up->port.info != NULL &&		/* Unopened serial console */
-	    up->port.info->port.tty != NULL)	/* Keyboard || mouse */
-		tty = up->port.info->port.tty;
+	if (up->port.state != NULL &&		/* Unopened serial console */
+	    up->port.state->port.tty != NULL)	/* Keyboard || mouse */
+		tty = up->port.state->port.tty;
 
 	for (;;) {
 
@@ -451,7 +451,7 @@ static void sunzilog_status_handle(struct uart_sunzilog_port *up,
 			uart_handle_cts_change(&up->port,
 					       (status & CTS));
 
-		wake_up_interruptible(&up->port.info->delta_msr_wait);
+		wake_up_interruptible(&up->port.state->port.delta_msr_wait);
 	}
 
 	up->prev_status = status;
@@ -501,9 +501,9 @@ static void sunzilog_transmit_chars(struct uart_sunzilog_port *up,
 		return;
 	}
 
-	if (up->port.info == NULL)
+	if (up->port.state == NULL)
 		goto ack_tx_int;
-	xmit = &up->port.info->xmit;
+	xmit = &up->port.state->xmit;
 	if (uart_circ_empty(xmit))
 		goto ack_tx_int;
 
@@ -705,7 +705,7 @@ static void sunzilog_start_tx(struct uart_port *port)
 		port->icount.tx++;
 		port->x_char = 0;
 	} else {
-		struct circ_buf *xmit = &port->info->xmit;
+		struct circ_buf *xmit = &port->state->xmit;
 
 		writeb(xmit->buf[xmit->tail], &channel->data);
 		ZSDELAY();
diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c
index 063a313b755c..34b31da01d09 100644
--- a/drivers/serial/timbuart.c
+++ b/drivers/serial/timbuart.c
@@ -77,7 +77,7 @@ static void timbuart_flush_buffer(struct uart_port *port)
 
 static void timbuart_rx_chars(struct uart_port *port)
 {
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 
 	while (ioread32(port->membase + TIMBUART_ISR) & RXDP) {
 		u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
@@ -86,7 +86,7 @@ static void timbuart_rx_chars(struct uart_port *port)
 	}
 
 	spin_unlock(&port->lock);
-	tty_flip_buffer_push(port->info->port.tty);
+	tty_flip_buffer_push(port->state->port.tty);
 	spin_lock(&port->lock);
 
 	dev_dbg(port->dev, "%s - total read %d bytes\n",
@@ -95,7 +95,7 @@ static void timbuart_rx_chars(struct uart_port *port)
 
 static void timbuart_tx_chars(struct uart_port *port)
 {
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	while (!(ioread32(port->membase + TIMBUART_ISR) & TXBF) &&
 		!uart_circ_empty(xmit)) {
@@ -118,7 +118,7 @@ static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier)
 {
 	struct timbuart_port *uart =
 		container_of(port, struct timbuart_port, port);
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	if (uart_circ_empty(xmit) || uart_tx_stopped(port))
 		return;
@@ -231,7 +231,7 @@ static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier)
 		iowrite32(CTS_DELTA, port->membase + TIMBUART_ISR);
 		cts = timbuart_get_mctrl(port);
 		uart_handle_cts_change(port, cts & TIOCM_CTS);
-		wake_up_interruptible(&port->info->delta_msr_wait);
+		wake_up_interruptible(&port->state->port.delta_msr_wait);
 	}
 
 	*ier |= CTS_DELTA;
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index 3317148a4b93..377f2712289e 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -75,7 +75,7 @@ static struct uart_port ulite_ports[ULITE_NR_UARTS];
 
 static int ulite_receive(struct uart_port *port, int stat)
 {
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	unsigned char ch = 0;
 	char flag = TTY_NORMAL;
 
@@ -125,7 +125,7 @@ static int ulite_receive(struct uart_port *port, int stat)
 
 static int ulite_transmit(struct uart_port *port, int stat)
 {
-	struct circ_buf *xmit  = &port->info->xmit;
+	struct circ_buf *xmit  = &port->state->xmit;
 
 	if (stat & ULITE_STATUS_TXFULL)
 		return 0;
@@ -154,17 +154,22 @@ static int ulite_transmit(struct uart_port *port, int stat)
 static irqreturn_t ulite_isr(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	int busy;
+	int busy, n = 0;
 
 	do {
 		int stat = readb(port->membase + ULITE_STATUS);
 		busy  = ulite_receive(port, stat);
 		busy |= ulite_transmit(port, stat);
+		n++;
 	} while (busy);
 
-	tty_flip_buffer_push(port->info->port.tty);
-
-	return IRQ_HANDLED;
+	/* work done? */
+	if (n > 1) {
+		tty_flip_buffer_push(port->state->port.tty);
+		return IRQ_HANDLED;
+	} else {
+		return IRQ_NONE;
+	}
 }
 
 static unsigned int ulite_tx_empty(struct uart_port *port)
@@ -221,7 +226,7 @@ static int ulite_startup(struct uart_port *port)
 	int ret;
 
 	ret = request_irq(port->irq, ulite_isr,
-			  IRQF_DISABLED | IRQF_SAMPLE_RANDOM, "uartlite", port);
+			  IRQF_SHARED | IRQF_SAMPLE_RANDOM, "uartlite", port);
 	if (ret)
 		return ret;
 
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index e945e780b5c9..0c08f286a2ef 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -327,7 +327,7 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
 	unsigned char *p;
 	unsigned int count;
 	struct uart_port *port = &qe_port->port;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	bdp = qe_port->rx_cur;
 
@@ -466,7 +466,7 @@ static void qe_uart_int_rx(struct uart_qe_port *qe_port)
 	int i;
 	unsigned char ch, *cp;
 	struct uart_port *port = &qe_port->port;
-	struct tty_struct *tty = port->info->port.tty;
+	struct tty_struct *tty = port->state->port.tty;
 	struct qe_bd *bdp;
 	u16 status;
 	unsigned int flg;
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index dac550e57c29..3beb6ab4fa68 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -318,7 +318,7 @@ static inline void receive_chars(struct uart_port *port, uint8_t *status)
 	char flag;
 	int max_count = RX_MAX_COUNT;
 
-	tty = port->info->port.tty;
+	tty = port->state->port.tty;
 	lsr = *status;
 
 	do {
@@ -386,7 +386,7 @@ static inline void check_modem_status(struct uart_port *port)
 	if (msr & UART_MSR_DCTS)
 		uart_handle_cts_change(port, msr & UART_MSR_CTS);
 
-	wake_up_interruptible(&port->info->delta_msr_wait);
+	wake_up_interruptible(&port->state->port.delta_msr_wait);
 }
 
 static inline void transmit_chars(struct uart_port *port)
@@ -394,7 +394,7 @@ static inline void transmit_chars(struct uart_port *port)
 	struct circ_buf *xmit;
 	int max_count = TX_MAX_COUNT;
 
-	xmit = &port->info->xmit;
+	xmit = &port->state->xmit;
 
 	if (port->x_char) {
 		siu_write(port, UART_TX, port->x_char);
diff --git a/drivers/serial/zs.c b/drivers/serial/zs.c
index d8c2809b1ab6..1a7fd3e70315 100644
--- a/drivers/serial/zs.c
+++ b/drivers/serial/zs.c
@@ -602,12 +602,12 @@ static void zs_receive_chars(struct zs_port *zport)
 		uart_insert_char(uport, status, Rx_OVR, ch, flag);
 	}
 
-	tty_flip_buffer_push(uport->info->port.tty);
+	tty_flip_buffer_push(uport->state->port.tty);
 }
 
 static void zs_raw_transmit_chars(struct zs_port *zport)
 {
-	struct circ_buf *xmit = &zport->port.info->xmit;
+	struct circ_buf *xmit = &zport->port.state->xmit;
 
 	/* XON/XOFF chars.  */
 	if (zport->port.x_char) {
@@ -686,7 +686,7 @@ static void zs_status_handle(struct zs_port *zport, struct zs_port *zport_a)
 			uport->icount.rng++;
 
 		if (delta)
-			wake_up_interruptible(&uport->info->delta_msr_wait);
+			wake_up_interruptible(&uport->state->port.delta_msr_wait);
 
 		spin_lock(&scc->zlock);
 	}