Merge tag 'qcom-drivers-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers

Pull "Qualcomm ARM Based Driver Updates for v4.9" from Andy Gross:

* Silence smem probe defer messages
* Make scm explicitly non-modular
* Assorted SMD bug fixes and minor changes
* Add PM8018 RTC support

* tag 'qcom-drivers-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  rtc: rtc-pm8xxx: Add support for pm8018 rtc
  soc: qcom: smd: Reset rx tail rather than tx
  soc: qcom: smd: Represent smd edges as devices
  soc: qcom: smd: Request irqs after parsing properties
  soc: qcom: smd: Simplify multi channel handling
  soc: qcom: smd: Correct compile stub prototypes
  firmware: qcom_scm: make it explicitly non-modular
  soc: qcom: smem: Silence probe defer error

2 files changed, 157 insertions, 111 deletions

diff --git a/drivers/soc/qcom/smd.c b/drivers/soc/qcom/smd.c
index ac1957dfdf24..322034ab9d37 100644
--- a/drivers/soc/qcom/smd.c
+++ b/drivers/soc/qcom/smd.c
@@ -95,7 +95,7 @@ static const struct {
 
 /**
  * struct qcom_smd_edge - representing a remote processor
- * @smd:		handle to qcom_smd
+ * @dev:		device for this edge
  * @of_node:		of_node handle for information related to this edge
  * @edge_id:		identifier of this edge
  * @remote_pid:		identifier of remote processor
@@ -111,7 +111,8 @@ static const struct {
  * @state_work:		work item for edge state changes
  */
 struct qcom_smd_edge {
-	struct qcom_smd *smd;
+	struct device dev;
+
 	struct device_node *of_node;
 	unsigned edge_id;
 	unsigned remote_pid;
@@ -135,6 +136,8 @@ struct qcom_smd_edge {
 	struct work_struct state_work;
 };
 
+#define to_smd_edge(d) container_of(d, struct qcom_smd_edge, dev)
+
 /*
  * SMD channel states.
  */
@@ -197,20 +200,6 @@ struct qcom_smd_channel {
 	void *drvdata;
 
 	struct list_head list;
-	struct list_head dev_list;
-};
-
-/**
- * struct qcom_smd - smd struct
- * @dev:	device struct
- * @num_edges:	number of entries in @edges
- * @edges:	array of edges to be handled
- */
-struct qcom_smd {
-	struct device *dev;
-
-	unsigned num_edges;
-	struct qcom_smd_edge edges[0];
 };
 
 /*
@@ -374,7 +363,7 @@ static void qcom_smd_channel_reset(struct qcom_smd_channel *channel)
 	SET_TX_CHANNEL_FLAG(channel, fSTATE, 1);
 	SET_TX_CHANNEL_FLAG(channel, fBLOCKREADINTR, 1);
 	SET_TX_CHANNEL_INFO(channel, head, 0);
-	SET_TX_CHANNEL_INFO(channel, tail, 0);
+	SET_RX_CHANNEL_INFO(channel, tail, 0);
 
 	qcom_smd_signal_channel(channel);
 
@@ -421,7 +410,7 @@ static void qcom_smd_channel_set_state(struct qcom_smd_channel *channel,
 	if (channel->state == state)
 		return;
 
-	dev_dbg(edge->smd->dev, "set_state(%s, %d)\n", channel->name, state);
+	dev_dbg(&edge->dev, "set_state(%s, %d)\n", channel->name, state);
 
 	SET_TX_CHANNEL_FLAG(channel, fDSR, is_open);
 	SET_TX_CHANNEL_FLAG(channel, fCTS, is_open);
@@ -891,8 +880,6 @@ static int qcom_smd_dev_remove(struct device *dev)
 	struct qcom_smd_device *qsdev = to_smd_device(dev);
 	struct qcom_smd_driver *qsdrv = to_smd_driver(dev);
 	struct qcom_smd_channel *channel = qsdev->channel;
-	struct qcom_smd_channel *tmp;
-	struct qcom_smd_channel *ch;
 
 	qcom_smd_channel_set_state(channel, SMD_CHANNEL_CLOSING);
 
@@ -911,15 +898,9 @@ static int qcom_smd_dev_remove(struct device *dev)
 	if (qsdrv->remove)
 		qsdrv->remove(qsdev);
 
-	/*
-	 * The client is now gone, close and release all channels associated
-	 * with this sdev
-	 */
-	list_for_each_entry_safe(ch, tmp, &channel->dev_list, dev_list) {
-		qcom_smd_channel_close(ch);
-		list_del(&ch->dev_list);
-		ch->qsdev = NULL;
-	}
+	/* The client is now gone, close the primary channel */
+	qcom_smd_channel_close(channel);
+	channel->qsdev = NULL;
 
 	return 0;
 }
@@ -973,13 +954,12 @@ static int qcom_smd_create_device(struct qcom_smd_channel *channel)
 	struct qcom_smd_device *qsdev;
 	struct qcom_smd_edge *edge = channel->edge;
 	struct device_node *node;
-	struct qcom_smd *smd = edge->smd;
 	int ret;
 
 	if (channel->qsdev)
 		return -EEXIST;
 
-	dev_dbg(smd->dev, "registering '%s'\n", channel->name);
+	dev_dbg(&edge->dev, "registering '%s'\n", channel->name);
 
 	qsdev = kzalloc(sizeof(*qsdev), GFP_KERNEL);
 	if (!qsdev)
@@ -990,7 +970,7 @@ static int qcom_smd_create_device(struct qcom_smd_channel *channel)
 		     edge->of_node->name,
 		     node ? node->name : channel->name);
 
-	qsdev->dev.parent = smd->dev;
+	qsdev->dev.parent = &edge->dev;
 	qsdev->dev.bus = &qcom_smd_bus;
 	qsdev->dev.release = qcom_smd_release_device;
 	qsdev->dev.of_node = node;
@@ -1001,7 +981,7 @@ static int qcom_smd_create_device(struct qcom_smd_channel *channel)
 
 	ret = device_register(&qsdev->dev);
 	if (ret) {
-		dev_err(smd->dev, "device_register failed: %d\n", ret);
+		dev_err(&edge->dev, "device_register failed: %d\n", ret);
 		put_device(&qsdev->dev);
 	}
 
@@ -1091,6 +1071,8 @@ qcom_smd_find_channel(struct qcom_smd_edge *edge, const char *name)
  *
  * Returns a channel handle on success, or -EPROBE_DEFER if the channel isn't
  * ready.
+ *
+ * Any channels returned must be closed with a call to qcom_smd_close_channel()
  */
 struct qcom_smd_channel *qcom_smd_open_channel(struct qcom_smd_channel *parent,
 					       const char *name,
@@ -1120,15 +1102,21 @@ struct qcom_smd_channel *qcom_smd_open_channel(struct qcom_smd_channel *parent,
 		return ERR_PTR(ret);
 	}
 
-	/*
-	 * Append the list of channel to the channels associated with the sdev
-	 */
-	list_add_tail(&channel->dev_list, &sdev->channel->dev_list);
-
 	return channel;
 }
 EXPORT_SYMBOL(qcom_smd_open_channel);
 
+/**
+ * qcom_smd_close_channel() - close an additionally opened channel
+ * @channel:	channel handle, returned by qcom_smd_open_channel()
+ */
+void qcom_smd_close_channel(struct qcom_smd_channel *channel)
+{
+	qcom_smd_channel_close(channel);
+	channel->qsdev = NULL;
+}
+EXPORT_SYMBOL(qcom_smd_close_channel);
+
 /*
  * Allocate the qcom_smd_channel object for a newly found smd channel,
  * retrieving and validating the smem items involved.
@@ -1139,20 +1127,18 @@ static struct qcom_smd_channel *qcom_smd_create_channel(struct qcom_smd_edge *ed
 							char *name)
 {
 	struct qcom_smd_channel *channel;
-	struct qcom_smd *smd = edge->smd;
 	size_t fifo_size;
 	size_t info_size;
 	void *fifo_base;
 	void *info;
 	int ret;
 
-	channel = devm_kzalloc(smd->dev, sizeof(*channel), GFP_KERNEL);
+	channel = devm_kzalloc(&edge->dev, sizeof(*channel), GFP_KERNEL);
 	if (!channel)
 		return ERR_PTR(-ENOMEM);
 
-	INIT_LIST_HEAD(&channel->dev_list);
 	channel->edge = edge;
-	channel->name = devm_kstrdup(smd->dev, name, GFP_KERNEL);
+	channel->name = devm_kstrdup(&edge->dev, name, GFP_KERNEL);
 	if (!channel->name)
 		return ERR_PTR(-ENOMEM);
 
@@ -1175,7 +1161,7 @@ static struct qcom_smd_channel *qcom_smd_create_channel(struct qcom_smd_edge *ed
 	} else if (info_size == 2 * sizeof(struct smd_channel_info)) {
 		channel->info = info;
 	} else {
-		dev_err(smd->dev,
+		dev_err(&edge->dev,
 			"channel info of size %zu not supported\n", info_size);
 		ret = -EINVAL;
 		goto free_name_and_channel;
@@ -1190,7 +1176,7 @@ static struct qcom_smd_channel *qcom_smd_create_channel(struct qcom_smd_edge *ed
 	/* The channel consist of a rx and tx fifo of equal size */
 	fifo_size /= 2;
 
-	dev_dbg(smd->dev, "new channel '%s' info-size: %zu fifo-size: %zu\n",
+	dev_dbg(&edge->dev, "new channel '%s' info-size: %zu fifo-size: %zu\n",
 			  name, info_size, fifo_size);
 
 	channel->tx_fifo = fifo_base;
@@ -1202,8 +1188,8 @@ static struct qcom_smd_channel *qcom_smd_create_channel(struct qcom_smd_edge *ed
 	return channel;
 
 free_name_and_channel:
-	devm_kfree(smd->dev, channel->name);
-	devm_kfree(smd->dev, channel);
+	devm_kfree(&edge->dev, channel->name);
+	devm_kfree(&edge->dev, channel);
 
 	return ERR_PTR(ret);
 }
@@ -1219,7 +1205,6 @@ static void qcom_channel_scan_worker(struct work_struct *work)
 	struct qcom_smd_alloc_entry *alloc_tbl;
 	struct qcom_smd_alloc_entry *entry;
 	struct qcom_smd_channel *channel;
-	struct qcom_smd *smd = edge->smd;
 	unsigned long flags;
 	unsigned fifo_id;
 	unsigned info_id;
@@ -1263,7 +1248,7 @@ static void qcom_channel_scan_worker(struct work_struct *work)
 			list_add(&channel->list, &edge->channels);
 			spin_unlock_irqrestore(&edge->channels_lock, flags);
 
-			dev_dbg(smd->dev, "new channel found: '%s'\n", channel->name);
+			dev_dbg(&edge->dev, "new channel found: '%s'\n", channel->name);
 			set_bit(i, edge->allocated[tbl]);
 
 			wake_up_interruptible(&edge->new_channel_event);
@@ -1350,22 +1335,6 @@ static int qcom_smd_parse_edge(struct device *dev,
 
 	edge->of_node = of_node_get(node);
 
-	irq = irq_of_parse_and_map(node, 0);
-	if (irq < 0) {
-		dev_err(dev, "required smd interrupt missing\n");
-		return -EINVAL;
-	}
-
-	ret = devm_request_irq(dev, irq,
-			       qcom_smd_edge_intr, IRQF_TRIGGER_RISING,
-			       node->name, edge);
-	if (ret) {
-		dev_err(dev, "failed to request smd irq\n");
-		return ret;
-	}
-
-	edge->irq = irq;
-
 	key = "qcom,smd-edge";
 	ret = of_property_read_u32(node, key, &edge->edge_id);
 	if (ret) {
@@ -1400,18 +1369,121 @@ static int qcom_smd_parse_edge(struct device *dev,
 		return -EINVAL;
 	}
 
+	irq = irq_of_parse_and_map(node, 0);
+	if (irq < 0) {
+		dev_err(dev, "required smd interrupt missing\n");
+		return -EINVAL;
+	}
+
+	ret = devm_request_irq(dev, irq,
+			       qcom_smd_edge_intr, IRQF_TRIGGER_RISING,
+			       node->name, edge);
+	if (ret) {
+		dev_err(dev, "failed to request smd irq\n");
+		return ret;
+	}
+
+	edge->irq = irq;
+
 	return 0;
 }
 
-static int qcom_smd_probe(struct platform_device *pdev)
+/*
+ * Release function for an edge.
+ * Reset the state of each associated channel and free the edge context.
+ */
+static void qcom_smd_edge_release(struct device *dev)
+{
+	struct qcom_smd_channel *channel;
+	struct qcom_smd_edge *edge = to_smd_edge(dev);
+
+	list_for_each_entry(channel, &edge->channels, list) {
+		SET_RX_CHANNEL_INFO(channel, state, SMD_CHANNEL_CLOSED);
+		SET_RX_CHANNEL_INFO(channel, head, 0);
+		SET_RX_CHANNEL_INFO(channel, tail, 0);
+	}
+
+	kfree(edge);
+}
+
+/**
+ * qcom_smd_register_edge() - register an edge based on an device_node
+ * @parent:	parent device for the edge
+ * @node:	device_node describing the edge
+ *
+ * Returns an edge reference, or negative ERR_PTR() on failure.
+ */
+struct qcom_smd_edge *qcom_smd_register_edge(struct device *parent,
+					     struct device_node *node)
 {
 	struct qcom_smd_edge *edge;
-	struct device_node *node;
-	struct qcom_smd *smd;
-	size_t array_size;
-	int num_edges;
 	int ret;
-	int i = 0;
+
+	edge = kzalloc(sizeof(*edge), GFP_KERNEL);
+	if (!edge)
+		return ERR_PTR(-ENOMEM);
+
+	init_waitqueue_head(&edge->new_channel_event);
+
+	edge->dev.parent = parent;
+	edge->dev.release = qcom_smd_edge_release;
+	dev_set_name(&edge->dev, "%s:%s", dev_name(parent), node->name);
+	ret = device_register(&edge->dev);
+	if (ret) {
+		pr_err("failed to register smd edge\n");
+		return ERR_PTR(ret);
+	}
+
+	ret = qcom_smd_parse_edge(&edge->dev, node, edge);
+	if (ret) {
+		dev_err(&edge->dev, "failed to parse smd edge\n");
+		goto unregister_dev;
+	}
+
+	schedule_work(&edge->scan_work);
+
+	return edge;
+
+unregister_dev:
+	put_device(&edge->dev);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL(qcom_smd_register_edge);
+
+static int qcom_smd_remove_device(struct device *dev, void *data)
+{
+	device_unregister(dev);
+	of_node_put(dev->of_node);
+	put_device(dev);
+
+	return 0;
+}
+
+/**
+ * qcom_smd_unregister_edge() - release an edge and its children
+ * @edge:	edge reference acquired from qcom_smd_register_edge
+ */
+int qcom_smd_unregister_edge(struct qcom_smd_edge *edge)
+{
+	int ret;
+
+	disable_irq(edge->irq);
+	cancel_work_sync(&edge->scan_work);
+	cancel_work_sync(&edge->state_work);
+
+	ret = device_for_each_child(&edge->dev, NULL, qcom_smd_remove_device);
+	if (ret)
+		dev_warn(&edge->dev, "can't remove smd device: %d\n", ret);
+
+	device_unregister(&edge->dev);
+
+	return 0;
+}
+EXPORT_SYMBOL(qcom_smd_unregister_edge);
+
+static int qcom_smd_probe(struct platform_device *pdev)
+{
+	struct device_node *node;
 	void *p;
 
 	/* Wait for smem */
@@ -1419,29 +1491,17 @@ static int qcom_smd_probe(struct platform_device *pdev)
 	if (PTR_ERR(p) == -EPROBE_DEFER)
 		return PTR_ERR(p);
 
-	num_edges = of_get_available_child_count(pdev->dev.of_node);
-	array_size = sizeof(*smd) + num_edges * sizeof(struct qcom_smd_edge);
-	smd = devm_kzalloc(&pdev->dev, array_size, GFP_KERNEL);
-	if (!smd)
-		return -ENOMEM;
-	smd->dev = &pdev->dev;
-
-	smd->num_edges = num_edges;
-	for_each_available_child_of_node(pdev->dev.of_node, node) {
-		edge = &smd->edges[i++];
-		edge->smd = smd;
-		init_waitqueue_head(&edge->new_channel_event);
-
-		ret = qcom_smd_parse_edge(&pdev->dev, node, edge);
-		if (ret)
-			continue;
+	for_each_available_child_of_node(pdev->dev.of_node, node)
+		qcom_smd_register_edge(&pdev->dev, node);
 
-		schedule_work(&edge->scan_work);
-	}
+	return 0;
+}
 
-	platform_set_drvdata(pdev, smd);
+static int qcom_smd_remove_edge(struct device *dev, void *data)
+{
+	struct qcom_smd_edge *edge = to_smd_edge(dev);
 
-	return 0;
+	return qcom_smd_unregister_edge(edge);
 }
 
 /*
@@ -1450,28 +1510,13 @@ static int qcom_smd_probe(struct platform_device *pdev)
  */
 static int qcom_smd_remove(struct platform_device *pdev)
 {
-	struct qcom_smd_channel *channel;
-	struct qcom_smd_edge *edge;
-	struct qcom_smd *smd = platform_get_drvdata(pdev);
-	int i;
-
-	for (i = 0; i < smd->num_edges; i++) {
-		edge = &smd->edges[i];
-
-		disable_irq(edge->irq);
-		cancel_work_sync(&edge->scan_work);
-		cancel_work_sync(&edge->state_work);
-
-		/* No need to lock here, because the writer is gone */
-		list_for_each_entry(channel, &edge->channels, list) {
-			if (!channel->qsdev)
-				continue;
+	int ret;
 
-			qcom_smd_destroy_device(channel);
-		}
-	}
+	ret = device_for_each_child(&pdev->dev, NULL, qcom_smd_remove_edge);
+	if (ret)
+		dev_warn(&pdev->dev, "can't remove smd device: %d\n", ret);
 
-	return 0;
+	return ret;
 }
 
 static const struct of_device_id qcom_smd_of_match[] = {
diff --git a/drivers/soc/qcom/smem.c b/drivers/soc/qcom/smem.c
index 2e1aa9f130f4..18ec52f2078a 100644
--- a/drivers/soc/qcom/smem.c
+++ b/drivers/soc/qcom/smem.c
@@ -740,7 +740,8 @@ static int qcom_smem_probe(struct platform_device *pdev)
 
 	hwlock_id = of_hwspin_lock_get_id(pdev->dev.of_node, 0);
 	if (hwlock_id < 0) {
-		dev_err(&pdev->dev, "failed to retrieve hwlock\n");
+		if (hwlock_id != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "failed to retrieve hwlock\n");
 		return hwlock_id;
 	}