[PATCH] SPI: add PXA2xx SSP SPI Driver

This driver turns a PXA2xx synchronous serial port (SSP) into a SPI master
controller (see Documentation/spi/spi_summary).  The driver has the following
features:

- Support for any PXA2xx SSP
- SSP PIO and SSP DMA data transfers.
- External and Internal (SSPFRM) chip selects.
- Per slave device (chip) configuration.
- Full suspend, freeze, resume support.

Signed-off-by: Stephen Street <stephen@streetfiresound.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 1399 insertions, 0 deletions

diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
new file mode 100644
index 000000000000..913e1aff0235
--- /dev/null
+++ b/drivers/spi/pxa2xx_spi.c
@@ -0,0 +1,1399 @@
+/*
+ * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/delay.h>
+#include <asm/dma.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx_spi.h>
+
+MODULE_AUTHOR("Stephen Street");
+MODULE_DESCRIPTION("PXA2xx SSP SPI Contoller");
+MODULE_LICENSE("GPL");
+
+#define MAX_BUSES 3
+
+#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
+#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
+#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0)
+
+#define DEFINE_SSP_REG(reg, off) \
+static inline u32 read_##reg(void *p) { return __raw_readl(p + (off)); } \
+static inline void write_##reg(u32 v, void *p) { __raw_writel(v, p + (off)); }
+
+DEFINE_SSP_REG(SSCR0, 0x00)
+DEFINE_SSP_REG(SSCR1, 0x04)
+DEFINE_SSP_REG(SSSR, 0x08)
+DEFINE_SSP_REG(SSITR, 0x0c)
+DEFINE_SSP_REG(SSDR, 0x10)
+DEFINE_SSP_REG(SSTO, 0x28)
+DEFINE_SSP_REG(SSPSP, 0x2c)
+
+#define START_STATE ((void*)0)
+#define RUNNING_STATE ((void*)1)
+#define DONE_STATE ((void*)2)
+#define ERROR_STATE ((void*)-1)
+
+#define QUEUE_RUNNING 0
+#define QUEUE_STOPPED 1
+
+struct driver_data {
+	/* Driver model hookup */
+	struct platform_device *pdev;
+
+	/* SPI framework hookup */
+	enum pxa_ssp_type ssp_type;
+	struct spi_master *master;
+
+	/* PXA hookup */
+	struct pxa2xx_spi_master *master_info;
+
+	/* DMA setup stuff */
+	int rx_channel;
+	int tx_channel;
+	u32 *null_dma_buf;
+
+	/* SSP register addresses */
+	void *ioaddr;
+	u32 ssdr_physical;
+
+	/* SSP masks*/
+	u32 dma_cr1;
+	u32 int_cr1;
+	u32 clear_sr;
+	u32 mask_sr;
+
+	/* Driver message queue */
+	struct workqueue_struct	*workqueue;
+	struct work_struct pump_messages;
+	spinlock_t lock;
+	struct list_head queue;
+	int busy;
+	int run;
+
+	/* Message Transfer pump */
+	struct tasklet_struct pump_transfers;
+
+	/* Current message transfer state info */
+	struct spi_message* cur_msg;
+	struct spi_transfer* cur_transfer;
+	struct chip_data *cur_chip;
+	size_t len;
+	void *tx;
+	void *tx_end;
+	void *rx;
+	void *rx_end;
+	int dma_mapped;
+	dma_addr_t rx_dma;
+	dma_addr_t tx_dma;
+	size_t rx_map_len;
+	size_t tx_map_len;
+	int cs_change;
+	void (*write)(struct driver_data *drv_data);
+	void (*read)(struct driver_data *drv_data);
+	irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
+	void (*cs_control)(u32 command);
+};
+
+struct chip_data {
+	u32 cr0;
+	u32 cr1;
+	u32 to;
+	u32 psp;
+	u32 timeout;
+	u8 n_bytes;
+	u32 dma_width;
+	u32 dma_burst_size;
+	u32 threshold;
+	u32 dma_threshold;
+	u8 enable_dma;
+	void (*write)(struct driver_data *drv_data);
+	void (*read)(struct driver_data *drv_data);
+	void (*cs_control)(u32 command);
+};
+
+static void pump_messages(void *data);
+
+static int flush(struct driver_data *drv_data)
+{
+	unsigned long limit = loops_per_jiffy << 1;
+
+	void *reg = drv_data->ioaddr;
+
+	do {
+		while (read_SSSR(reg) & SSSR_RNE) {
+			read_SSDR(reg);
+		}
+	} while ((read_SSSR(reg) & SSSR_BSY) && limit--);
+	write_SSSR(SSSR_ROR, reg);
+
+	return limit;
+}
+
+static void restore_state(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	/* Clear status and disable clock */
+	write_SSSR(drv_data->clear_sr, reg);
+	write_SSCR0(drv_data->cur_chip->cr0 & ~SSCR0_SSE, reg);
+
+	/* Load the registers */
+	write_SSCR1(drv_data->cur_chip->cr1, reg);
+	write_SSCR0(drv_data->cur_chip->cr0, reg);
+	if (drv_data->ssp_type != PXA25x_SSP) {
+		write_SSTO(0, reg);
+		write_SSPSP(drv_data->cur_chip->psp, reg);
+	}
+}
+
+static void null_cs_control(u32 command)
+{
+}
+
+static void null_writer(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+	u8 n_bytes = drv_data->cur_chip->n_bytes;
+
+	while ((read_SSSR(reg) & SSSR_TNF)
+			&& (drv_data->tx < drv_data->tx_end)) {
+		write_SSDR(0, reg);
+		drv_data->tx += n_bytes;
+	}
+}
+
+static void null_reader(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+	u8 n_bytes = drv_data->cur_chip->n_bytes;
+
+	while ((read_SSSR(reg) & SSSR_RNE)
+			&& (drv_data->rx < drv_data->rx_end)) {
+		read_SSDR(reg);
+		drv_data->rx += n_bytes;
+	}
+}
+
+static void u8_writer(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_TNF)
+			&& (drv_data->tx < drv_data->tx_end)) {
+		write_SSDR(*(u8 *)(drv_data->tx), reg);
+		++drv_data->tx;
+	}
+}
+
+static void u8_reader(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_RNE)
+			&& (drv_data->rx < drv_data->rx_end)) {
+		*(u8 *)(drv_data->rx) = read_SSDR(reg);
+		++drv_data->rx;
+	}
+}
+
+static void u16_writer(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_TNF)
+			&& (drv_data->tx < drv_data->tx_end)) {
+		write_SSDR(*(u16 *)(drv_data->tx), reg);
+		drv_data->tx += 2;
+	}
+}
+
+static void u16_reader(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_RNE)
+			&& (drv_data->rx < drv_data->rx_end)) {
+		*(u16 *)(drv_data->rx) = read_SSDR(reg);
+		drv_data->rx += 2;
+	}
+}
+static void u32_writer(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_TNF)
+			&& (drv_data->tx < drv_data->tx_end)) {
+		write_SSDR(*(u16 *)(drv_data->tx), reg);
+		drv_data->tx += 4;
+	}
+}
+
+static void u32_reader(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_RNE)
+			&& (drv_data->rx < drv_data->rx_end)) {
+		*(u32 *)(drv_data->rx) = read_SSDR(reg);
+		drv_data->rx += 4;
+	}
+}
+
+static void *next_transfer(struct driver_data *drv_data)
+{
+	struct spi_message *msg = drv_data->cur_msg;
+	struct spi_transfer *trans = drv_data->cur_transfer;
+
+	/* Move to next transfer */
+	if (trans->transfer_list.next != &msg->transfers) {
+		drv_data->cur_transfer =
+			list_entry(trans->transfer_list.next,
+					struct spi_transfer,
+					transfer_list);
+		return RUNNING_STATE;
+	} else
+		return DONE_STATE;
+}
+
+static int map_dma_buffers(struct driver_data *drv_data)
+{
+	struct spi_message *msg = drv_data->cur_msg;
+	struct device *dev = &msg->spi->dev;
+
+	if (!drv_data->cur_chip->enable_dma)
+		return 0;
+
+	if (msg->is_dma_mapped)
+		return  drv_data->rx_dma && drv_data->tx_dma;
+
+	if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx))
+		return 0;
+
+	/* Modify setup if rx buffer is null */
+	if (drv_data->rx == NULL) {
+		*drv_data->null_dma_buf = 0;
+		drv_data->rx = drv_data->null_dma_buf;
+		drv_data->rx_map_len = 4;
+	} else
+		drv_data->rx_map_len = drv_data->len;
+
+
+	/* Modify setup if tx buffer is null */
+	if (drv_data->tx == NULL) {
+		*drv_data->null_dma_buf = 0;
+		drv_data->tx = drv_data->null_dma_buf;
+		drv_data->tx_map_len = 4;
+	} else
+		drv_data->tx_map_len = drv_data->len;
+
+	/* Stream map the rx buffer */
+	drv_data->rx_dma = dma_map_single(dev, drv_data->rx,
+						drv_data->rx_map_len,
+						DMA_FROM_DEVICE);
+	if (dma_mapping_error(drv_data->rx_dma))
+		return 0;
+
+	/* Stream map the tx buffer */
+	drv_data->tx_dma = dma_map_single(dev, drv_data->tx,
+						drv_data->tx_map_len,
+						DMA_TO_DEVICE);
+
+	if (dma_mapping_error(drv_data->tx_dma)) {
+		dma_unmap_single(dev, drv_data->rx_dma,
+					drv_data->rx_map_len, DMA_FROM_DEVICE);
+		return 0;
+	}
+
+	return 1;
+}
+
+static void unmap_dma_buffers(struct driver_data *drv_data)
+{
+	struct device *dev;
+
+	if (!drv_data->dma_mapped)
+		return;
+
+	if (!drv_data->cur_msg->is_dma_mapped) {
+		dev = &drv_data->cur_msg->spi->dev;
+		dma_unmap_single(dev, drv_data->rx_dma,
+					drv_data->rx_map_len, DMA_FROM_DEVICE);
+		dma_unmap_single(dev, drv_data->tx_dma,
+					drv_data->tx_map_len, DMA_TO_DEVICE);
+	}
+
+	drv_data->dma_mapped = 0;
+}
+
+/* caller already set message->status; dma and pio irqs are blocked */
+static void giveback(struct spi_message *message, struct driver_data *drv_data)
+{
+	struct spi_transfer* last_transfer;
+
+	last_transfer = list_entry(message->transfers.prev,
+					struct spi_transfer,
+					transfer_list);
+
+	if (!last_transfer->cs_change)
+		drv_data->cs_control(PXA2XX_CS_DEASSERT);
+
+	message->state = NULL;
+	if (message->complete)
+		message->complete(message->context);
+
+	drv_data->cur_msg = NULL;
+	drv_data->cur_transfer = NULL;
+	drv_data->cur_chip = NULL;
+	queue_work(drv_data->workqueue, &drv_data->pump_messages);
+}
+
+static int wait_ssp_rx_stall(void *ioaddr)
+{
+	unsigned long limit = loops_per_jiffy << 1;
+
+	while ((read_SSSR(ioaddr) & SSSR_BSY) && limit--)
+		cpu_relax();
+
+	return limit;
+}
+
+static int wait_dma_channel_stop(int channel)
+{
+	unsigned long limit = loops_per_jiffy << 1;
+
+	while (!(DCSR(channel) & DCSR_STOPSTATE) && limit--)
+		cpu_relax();
+
+	return limit;
+}
+
+static void dma_handler(int channel, void *data, struct pt_regs *regs)
+{
+	struct driver_data *drv_data = data;
+	struct spi_message *msg = drv_data->cur_msg;
+	void *reg = drv_data->ioaddr;
+	u32 irq_status = DCSR(channel) & DMA_INT_MASK;
+	u32 trailing_sssr = 0;
+
+	if (irq_status & DCSR_BUSERR) {
+
+		/* Disable interrupts, clear status and reset DMA */
+		if (drv_data->ssp_type != PXA25x_SSP)
+			write_SSTO(0, reg);
+		write_SSSR(drv_data->clear_sr, reg);
+		write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+		DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+		DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+
+		if (flush(drv_data) == 0)
+			dev_err(&drv_data->pdev->dev,
+					"dma_handler: flush fail\n");
+
+		unmap_dma_buffers(drv_data);
+
+		if (channel == drv_data->tx_channel)
+			dev_err(&drv_data->pdev->dev,
+				"dma_handler: bad bus address on "
+				"tx channel %d, source %x target = %x\n",
+				channel, DSADR(channel), DTADR(channel));
+		else
+			dev_err(&drv_data->pdev->dev,
+				"dma_handler: bad bus address on "
+				"rx channel %d, source %x target = %x\n",
+				channel, DSADR(channel), DTADR(channel));
+
+		msg->state = ERROR_STATE;
+		tasklet_schedule(&drv_data->pump_transfers);
+	}
+
+	/* PXA255x_SSP has no timeout interrupt, wait for tailing bytes */
+	if ((drv_data->ssp_type == PXA25x_SSP)
+		&& (channel == drv_data->tx_channel)
+		&& (irq_status & DCSR_ENDINTR)) {
+
+		/* Wait for rx to stall */
+		if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
+			dev_err(&drv_data->pdev->dev,
+				"dma_handler: ssp rx stall failed\n");
+
+		/* Clear and disable interrupts on SSP and DMA channels*/
+		write_SSSR(drv_data->clear_sr, reg);
+		write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+		DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+		DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+		if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
+			dev_err(&drv_data->pdev->dev,
+				"dma_handler: dma rx channel stop failed\n");
+
+		unmap_dma_buffers(drv_data);
+
+		/* Read trailing bytes */
+		/* Calculate number of trailing bytes, read them */
+		trailing_sssr = read_SSSR(reg);
+		if ((trailing_sssr & 0xf008) != 0xf000) {
+			drv_data->rx = drv_data->rx_end -
+					(((trailing_sssr >> 12) & 0x0f) + 1);
+			drv_data->read(drv_data);
+		}
+		msg->actual_length += drv_data->len;
+
+		/* Release chip select if requested, transfer delays are
+		 * handled in pump_transfers */
+		if (drv_data->cs_change)
+			drv_data->cs_control(PXA2XX_CS_DEASSERT);
+
+		/* Move to next transfer */
+		msg->state = next_transfer(drv_data);
+
+		/* Schedule transfer tasklet */
+		tasklet_schedule(&drv_data->pump_transfers);
+	}
+}
+
+static irqreturn_t dma_transfer(struct driver_data *drv_data)
+{
+	u32 irq_status;
+	u32 trailing_sssr = 0;
+	struct spi_message *msg = drv_data->cur_msg;
+	void *reg = drv_data->ioaddr;
+
+	irq_status = read_SSSR(reg) & drv_data->mask_sr;
+	if (irq_status & SSSR_ROR) {
+		/* Clear and disable interrupts on SSP and DMA channels*/
+		if (drv_data->ssp_type != PXA25x_SSP)
+			write_SSTO(0, reg);
+		write_SSSR(drv_data->clear_sr, reg);
+		write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+		DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+		DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+		unmap_dma_buffers(drv_data);
+
+		if (flush(drv_data) == 0)
+			dev_err(&drv_data->pdev->dev,
+					"dma_transfer: flush fail\n");
+
+		dev_warn(&drv_data->pdev->dev, "dma_transfer: fifo overun\n");
+
+		drv_data->cur_msg->state = ERROR_STATE;
+		tasklet_schedule(&drv_data->pump_transfers);
+
+		return IRQ_HANDLED;
+	}
+
+	/* Check for false positive timeout */
+	if ((irq_status & SSSR_TINT) && DCSR(drv_data->tx_channel) & DCSR_RUN) {
+		write_SSSR(SSSR_TINT, reg);
+		return IRQ_HANDLED;
+	}
+
+	if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) {
+
+		/* Clear and disable interrupts on SSP and DMA channels*/
+		if (drv_data->ssp_type != PXA25x_SSP)
+			write_SSTO(0, reg);
+		write_SSSR(drv_data->clear_sr, reg);
+		write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+		DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+		DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+
+		if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
+			dev_err(&drv_data->pdev->dev,
+				"dma_transfer: dma rx channel stop failed\n");
+
+		if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
+			dev_err(&drv_data->pdev->dev,
+				"dma_transfer: ssp rx stall failed\n");
+
+		unmap_dma_buffers(drv_data);
+
+		/* Calculate number of trailing bytes, read them */
+		trailing_sssr = read_SSSR(reg);
+		if ((trailing_sssr & 0xf008) != 0xf000) {
+			drv_data->rx = drv_data->rx_end -
+					(((trailing_sssr >> 12) & 0x0f) + 1);
+			drv_data->read(drv_data);
+		}
+		msg->actual_length += drv_data->len;
+
+		/* Release chip select if requested, transfer delays are
+		 * handled in pump_transfers */
+		if (drv_data->cs_change)
+			drv_data->cs_control(PXA2XX_CS_DEASSERT);
+
+		/* Move to next transfer */
+		msg->state = next_transfer(drv_data);
+
+		/* Schedule transfer tasklet */
+		tasklet_schedule(&drv_data->pump_transfers);
+
+		return IRQ_HANDLED;
+	}
+
+	/* Opps problem detected */
+	return IRQ_NONE;
+}
+
+static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
+{
+	u32 irq_status;
+	struct spi_message *msg = drv_data->cur_msg;
+	void *reg = drv_data->ioaddr;
+	irqreturn_t handled = IRQ_NONE;
+	unsigned long limit = loops_per_jiffy << 1;
+
+	while ((irq_status = (read_SSSR(reg) & drv_data->mask_sr))) {
+
+		if (irq_status & SSSR_ROR) {
+
+			/* Clear and disable interrupts */
+			if (drv_data->ssp_type != PXA25x_SSP)
+				write_SSTO(0, reg);
+			write_SSSR(drv_data->clear_sr, reg);
+			write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
+
+			if (flush(drv_data) == 0)
+				dev_err(&drv_data->pdev->dev,
+					"interrupt_transfer: flush fail\n");
+
+			dev_warn(&drv_data->pdev->dev,
+					"interrupt_transfer: fifo overun\n");
+
+			msg->state = ERROR_STATE;
+			tasklet_schedule(&drv_data->pump_transfers);
+
+			return IRQ_HANDLED;
+		}
+
+		/* Look for false positive timeout */
+		if ((irq_status & SSSR_TINT)
+				&& (drv_data->rx < drv_data->rx_end))
+			write_SSSR(SSSR_TINT, reg);
+
+		/* Pump data */
+		drv_data->read(drv_data);
+		drv_data->write(drv_data);
+
+		if (drv_data->tx == drv_data->tx_end) {
+			/* Disable tx interrupt */
+			write_SSCR1(read_SSCR1(reg) & ~SSCR1_TIE, reg);
+
+			/* PXA25x_SSP has no timeout, read trailing bytes */
+			if (drv_data->ssp_type == PXA25x_SSP) {
+				while ((read_SSSR(reg) & SSSR_BSY) && limit--)
+					drv_data->read(drv_data);
+
+				if (limit == 0)
+					dev_err(&drv_data->pdev->dev,
+						"interrupt_transfer: "
+						"trailing byte read failed\n");
+			}
+		}
+
+		if ((irq_status & SSSR_TINT)
+				|| (drv_data->rx == drv_data->rx_end)) {
+
+			/* Clear timeout */
+			if (drv_data->ssp_type != PXA25x_SSP)
+				write_SSTO(0, reg);
+			write_SSSR(drv_data->clear_sr, reg);
+			write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
+
+			/* Update total byte transfered */
+			msg->actual_length += drv_data->len;
+
+			/* Release chip select if requested, transfer delays are
+			 * handled in pump_transfers */
+			if (drv_data->cs_change)
+				drv_data->cs_control(PXA2XX_CS_DEASSERT);
+
+			/* Move to next transfer */
+			msg->state = next_transfer(drv_data);
+
+			/* Schedule transfer tasklet */
+			tasklet_schedule(&drv_data->pump_transfers);
+
+			return IRQ_HANDLED;
+		}
+
+		/* We did something */
+		handled = IRQ_HANDLED;
+	}
+
+	return handled;
+}
+
+static irqreturn_t ssp_int(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct driver_data *drv_data = (struct driver_data *)dev_id;
+
+	if (!drv_data->cur_msg) {
+		dev_err(&drv_data->pdev->dev, "bad message state "
+				"in interrupt handler\n");
+		/* Never fail */
+		return IRQ_HANDLED;
+	}
+
+	return drv_data->transfer_handler(drv_data);
+}
+
+static void pump_transfers(unsigned long data)
+{
+	struct driver_data *drv_data = (struct driver_data *)data;
+	struct spi_message *message = NULL;
+	struct spi_transfer *transfer = NULL;
+	struct spi_transfer *previous = NULL;
+	struct chip_data *chip = NULL;
+	void *reg = drv_data->ioaddr;
+
+	/* Get current state information */
+	message = drv_data->cur_msg;
+	transfer = drv_data->cur_transfer;
+	chip = drv_data->cur_chip;
+
+	/* Handle for abort */
+	if (message->state == ERROR_STATE) {
+		message->status = -EIO;
+		giveback(message, drv_data);
+		return;
+	}
+
+	/* Handle end of message */
+	if (message->state == DONE_STATE) {
+		message->status = 0;
+		giveback(message, drv_data);
+		return;
+	}
+
+	/* Delay if requested at end of transfer*/
+	if (message->state == RUNNING_STATE) {
+		previous = list_entry(transfer->transfer_list.prev,
+					struct spi_transfer,
+					transfer_list);
+		if (previous->delay_usecs)
+			udelay(previous->delay_usecs);
+	}
+
+	/* Setup the transfer state based on the type of transfer */
+	if (flush(drv_data) == 0) {
+		dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n");
+		message->status = -EIO;
+		giveback(message, drv_data);
+		return;
+	}
+	drv_data->cs_control = chip->cs_control;
+	drv_data->tx = (void *)transfer->tx_buf;
+	drv_data->tx_end = drv_data->tx + transfer->len;
+	drv_data->rx = transfer->rx_buf;
+	drv_data->rx_end = drv_data->rx + transfer->len;
+	drv_data->rx_dma = transfer->rx_dma;
+	drv_data->tx_dma = transfer->tx_dma;
+	drv_data->len = transfer->len;
+	drv_data->write = drv_data->tx ? chip->write : null_writer;
+	drv_data->read = drv_data->rx ? chip->read : null_reader;
+	drv_data->cs_change = transfer->cs_change;
+	message->state = RUNNING_STATE;
+
+	/* Try to map dma buffer and do a dma transfer if successful */
+	if ((drv_data->dma_mapped = map_dma_buffers(drv_data))) {
+
+		/* Ensure we have the correct interrupt handler */
+		drv_data->transfer_handler = dma_transfer;
+
+		/* Setup rx DMA Channel */
+		DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+		DSADR(drv_data->rx_channel) = drv_data->ssdr_physical;
+		DTADR(drv_data->rx_channel) = drv_data->rx_dma;
+		if (drv_data->rx == drv_data->null_dma_buf)
+			/* No target address increment */
+			DCMD(drv_data->rx_channel) = DCMD_FLOWSRC
+							| chip->dma_width
+							| chip->dma_burst_size
+							| drv_data->len;
+		else
+			DCMD(drv_data->rx_channel) = DCMD_INCTRGADDR
+							| DCMD_FLOWSRC
+							| chip->dma_width
+							| chip->dma_burst_size
+							| drv_data->len;
+
+		/* Setup tx DMA Channel */
+		DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+		DSADR(drv_data->tx_channel) = drv_data->tx_dma;
+		DTADR(drv_data->tx_channel) = drv_data->ssdr_physical;
+		if (drv_data->tx == drv_data->null_dma_buf)
+			/* No source address increment */
+			DCMD(drv_data->tx_channel) = DCMD_FLOWTRG
+							| chip->dma_width
+							| chip->dma_burst_size
+							| drv_data->len;
+		else
+			DCMD(drv_data->tx_channel) = DCMD_INCSRCADDR
+							| DCMD_FLOWTRG
+							| chip->dma_width
+							| chip->dma_burst_size
+							| drv_data->len;
+
+		/* Enable dma end irqs on SSP to detect end of transfer */
+		if (drv_data->ssp_type == PXA25x_SSP)
+			DCMD(drv_data->tx_channel) |= DCMD_ENDIRQEN;
+
+		/* Fix me, need to handle cs polarity */
+		drv_data->cs_control(PXA2XX_CS_ASSERT);
+
+		/* Go baby, go */
+		write_SSSR(drv_data->clear_sr, reg);
+		DCSR(drv_data->rx_channel) |= DCSR_RUN;
+		DCSR(drv_data->tx_channel) |= DCSR_RUN;
+		if (drv_data->ssp_type != PXA25x_SSP)
+			write_SSTO(chip->timeout, reg);
+		write_SSCR1(chip->cr1
+				| chip->dma_threshold
+				| drv_data->dma_cr1,
+				reg);
+	} else {
+		/* Ensure we have the correct interrupt handler	*/
+		drv_data->transfer_handler = interrupt_transfer;
+
+		/* Fix me, need to handle cs polarity */
+		drv_data->cs_control(PXA2XX_CS_ASSERT);
+
+		/* Go baby, go */
+		write_SSSR(drv_data->clear_sr, reg);
+		if (drv_data->ssp_type != PXA25x_SSP)
+			write_SSTO(chip->timeout, reg);
+		write_SSCR1(chip->cr1
+				| chip->threshold
+				| drv_data->int_cr1,
+				reg);
+	}
+}
+
+static void pump_messages(void *data)
+{
+	struct driver_data *drv_data = data;
+	unsigned long flags;
+
+	/* Lock queue and check for queue work */
+	spin_lock_irqsave(&drv_data->lock, flags);
+	if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) {
+		drv_data->busy = 0;
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return;
+	}
+
+	/* Make sure we are not already running a message */
+	if (drv_data->cur_msg) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return;
+	}
+
+	/* Extract head of queue */
+	drv_data->cur_msg = list_entry(drv_data->queue.next,
+					struct spi_message, queue);
+	list_del_init(&drv_data->cur_msg->queue);
+	drv_data->busy = 1;
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	/* Initial message state*/
+	drv_data->cur_msg->state = START_STATE;
+	drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
+						struct spi_transfer,
+						transfer_list);
+
+	/* Setup the SSP using the per chip configuration */
+	drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
+	restore_state(drv_data);
+
+	/* Mark as busy and launch transfers */
+	tasklet_schedule(&drv_data->pump_transfers);
+}
+
+static int transfer(struct spi_device *spi, struct spi_message *msg)
+{
+	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
+	unsigned long flags;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+
+	if (drv_data->run == QUEUE_STOPPED) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return -ESHUTDOWN;
+	}
+
+	msg->actual_length = 0;
+	msg->status = -EINPROGRESS;
+	msg->state = START_STATE;
+
+	list_add_tail(&msg->queue, &drv_data->queue);
+
+	if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
+		queue_work(drv_data->workqueue, &drv_data->pump_messages);
+
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	return 0;
+}
+
+static int setup(struct spi_device *spi)
+{
+	struct pxa2xx_spi_chip *chip_info = NULL;
+	struct chip_data *chip;
+	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
+	unsigned int clk_div;
+
+	if (!spi->bits_per_word)
+		spi->bits_per_word = 8;
+
+	if (drv_data->ssp_type != PXA25x_SSP
+			&& (spi->bits_per_word < 4 || spi->bits_per_word > 32))
+		return -EINVAL;
+	else if (spi->bits_per_word < 4 || spi->bits_per_word > 16)
+		return -EINVAL;
+
+	/* Only alloc (or use chip_info) on first setup */
+	chip = spi_get_ctldata(spi);
+	if (chip == NULL) {
+		chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
+		if (!chip)
+			return -ENOMEM;
+
+		chip->cs_control = null_cs_control;
+		chip->enable_dma = 0;
+		chip->timeout = 5;
+		chip->threshold = SSCR1_RxTresh(1) | SSCR1_TxTresh(1);
+		chip->dma_burst_size = drv_data->master_info->enable_dma ?
+					DCMD_BURST8 : 0;
+
+		chip_info = spi->controller_data;
+	}
+
+	/* chip_info isn't always needed */
+	if (chip_info) {
+		if (chip_info->cs_control)
+			chip->cs_control = chip_info->cs_control;
+
+		chip->timeout = (chip_info->timeout_microsecs * 10000) / 2712;
+
+		chip->threshold = SSCR1_RxTresh(chip_info->rx_threshold)
+					| SSCR1_TxTresh(chip_info->tx_threshold);
+
+		chip->enable_dma = chip_info->dma_burst_size != 0
+					&& drv_data->master_info->enable_dma;
+		chip->dma_threshold = 0;
+
+		if (chip->enable_dma) {
+			if (chip_info->dma_burst_size <= 8) {
+				chip->dma_threshold = SSCR1_RxTresh(8)
+							| SSCR1_TxTresh(8);
+				chip->dma_burst_size = DCMD_BURST8;
+			} else if (chip_info->dma_burst_size <= 16) {
+				chip->dma_threshold = SSCR1_RxTresh(16)
+							| SSCR1_TxTresh(16);
+				chip->dma_burst_size = DCMD_BURST16;
+			} else {
+				chip->dma_threshold = SSCR1_RxTresh(32)
+							| SSCR1_TxTresh(32);
+				chip->dma_burst_size = DCMD_BURST32;
+			}
+		}
+
+
+		if (chip_info->enable_loopback)
+			chip->cr1 = SSCR1_LBM;
+	}
+
+	if (drv_data->ioaddr == SSP1_VIRT)
+		clk_div = SSP1_SerClkDiv(spi->max_speed_hz);
+	else if (drv_data->ioaddr == SSP2_VIRT)
+		clk_div = SSP2_SerClkDiv(spi->max_speed_hz);
+	else if (drv_data->ioaddr == SSP3_VIRT)
+		clk_div = SSP3_SerClkDiv(spi->max_speed_hz);
+	else
+		return -ENODEV;
+
+	chip->cr0 = clk_div
+			| SSCR0_Motorola
+			| SSCR0_DataSize(spi->bits_per_word & 0x0f)
+			| SSCR0_SSE
+			| (spi->bits_per_word > 16 ? SSCR0_EDSS : 0);
+	chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) << 4)
+			| (((spi->mode & SPI_CPOL) != 0) << 3);
+
+	/* NOTE:  PXA25x_SSP _could_ use external clocking ... */
+	if (drv_data->ssp_type != PXA25x_SSP)
+		dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n",
+				spi->bits_per_word,
+				(CLOCK_SPEED_HZ)
+					/ (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
+				spi->mode & 0x3);
+	else
+		dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n",
+				spi->bits_per_word,
+				(CLOCK_SPEED_HZ/2)
+					/ (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
+				spi->mode & 0x3);
+
+	if (spi->bits_per_word <= 8) {
+		chip->n_bytes = 1;
+		chip->dma_width = DCMD_WIDTH1;
+		chip->read = u8_reader;
+		chip->write = u8_writer;
+	} else if (spi->bits_per_word <= 16) {
+		chip->n_bytes = 2;
+		chip->dma_width = DCMD_WIDTH2;
+		chip->read = u16_reader;
+		chip->write = u16_writer;
+	} else if (spi->bits_per_word <= 32) {
+		chip->cr0 |= SSCR0_EDSS;
+		chip->n_bytes = 4;
+		chip->dma_width = DCMD_WIDTH4;
+		chip->read = u32_reader;
+		chip->write = u32_writer;
+	} else {
+		dev_err(&spi->dev, "invalid wordsize\n");
+		kfree(chip);
+		return -ENODEV;
+	}
+
+	spi_set_ctldata(spi, chip);
+
+	return 0;
+}
+
+static void cleanup(const struct spi_device *spi)
+{
+	struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi);
+
+	kfree(chip);
+}
+
+static int init_queue(struct driver_data *drv_data)
+{
+	INIT_LIST_HEAD(&drv_data->queue);
+	spin_lock_init(&drv_data->lock);
+
+	drv_data->run = QUEUE_STOPPED;
+	drv_data->busy = 0;
+
+	tasklet_init(&drv_data->pump_transfers,
+			pump_transfers,	(unsigned long)drv_data);
+
+	INIT_WORK(&drv_data->pump_messages, pump_messages, drv_data);
+	drv_data->workqueue = create_singlethread_workqueue(
+					drv_data->master->cdev.dev->bus_id);
+	if (drv_data->workqueue == NULL)
+		return -EBUSY;
+
+	return 0;
+}
+
+static int start_queue(struct driver_data *drv_data)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+
+	if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return -EBUSY;
+	}
+
+	drv_data->run = QUEUE_RUNNING;
+	drv_data->cur_msg = NULL;
+	drv_data->cur_transfer = NULL;
+	drv_data->cur_chip = NULL;
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	queue_work(drv_data->workqueue, &drv_data->pump_messages);
+
+	return 0;
+}
+
+static int stop_queue(struct driver_data *drv_data)
+{
+	unsigned long flags;
+	unsigned limit = 500;
+	int status = 0;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+
+	/* This is a bit lame, but is optimized for the common execution path.
+	 * A wait_queue on the drv_data->busy could be used, but then the common
+	 * execution path (pump_messages) would be required to call wake_up or
+	 * friends on every SPI message. Do this instead */
+	drv_data->run = QUEUE_STOPPED;
+	while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		msleep(10);
+		spin_lock_irqsave(&drv_data->lock, flags);
+	}
+
+	if (!list_empty(&drv_data->queue) || drv_data->busy)
+		status = -EBUSY;
+
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	return status;
+}
+
+static int destroy_queue(struct driver_data *drv_data)
+{
+	int status;
+
+	status = stop_queue(drv_data);
+	if (status != 0)
+		return status;
+
+	destroy_workqueue(drv_data->workqueue);
+
+	return 0;
+}
+
+static int pxa2xx_spi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct pxa2xx_spi_master *platform_info;
+	struct spi_master *master;
+	struct driver_data *drv_data = 0;
+	struct resource *memory_resource;
+	int irq;
+	int status = 0;
+
+	platform_info = dev->platform_data;
+
+	if (platform_info->ssp_type == SSP_UNDEFINED) {
+		dev_err(&pdev->dev, "undefined SSP\n");
+		return -ENODEV;
+	}
+
+	/* Allocate master with space for drv_data and null dma buffer */
+	master = spi_alloc_master(dev, sizeof(struct driver_data) + 16);
+	if (!master) {
+		dev_err(&pdev->dev, "can not alloc spi_master\n");
+		return -ENOMEM;
+	}
+	drv_data = spi_master_get_devdata(master);
+	drv_data->master = master;
+	drv_data->master_info = platform_info;
+	drv_data->pdev = pdev;
+
+	master->bus_num = pdev->id;
+	master->num_chipselect = platform_info->num_chipselect;
+	master->cleanup = cleanup;
+	master->setup = setup;
+	master->transfer = transfer;
+
+	drv_data->ssp_type = platform_info->ssp_type;
+	drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data +
+						sizeof(struct driver_data)), 8);
+
+	/* Setup register addresses */
+	memory_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!memory_resource) {
+		dev_err(&pdev->dev, "memory resources not defined\n");
+		status = -ENODEV;
+		goto out_error_master_alloc;
+	}
+
+	drv_data->ioaddr = (void *)io_p2v(memory_resource->start);
+	drv_data->ssdr_physical = memory_resource->start + 0x00000010;
+	if (platform_info->ssp_type == PXA25x_SSP) {
+		drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE;
+		drv_data->dma_cr1 = 0;
+		drv_data->clear_sr = SSSR_ROR;
+		drv_data->mask_sr = SSSR_RFS | SSSR_TFS | SSSR_ROR;
+	} else {
+		drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE;
+		drv_data->dma_cr1 = SSCR1_TSRE | SSCR1_RSRE | SSCR1_TINTE;
+		drv_data->clear_sr = SSSR_ROR | SSSR_TINT;
+		drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR;
+	}
+
+	/* Attach to IRQ */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "irq resource not defined\n");
+		status = -ENODEV;
+		goto out_error_master_alloc;
+	}
+
+	status = request_irq(irq, ssp_int, SA_INTERRUPT, dev->bus_id, drv_data);
+	if (status < 0) {
+		dev_err(&pdev->dev, "can not get IRQ\n");
+		goto out_error_master_alloc;
+	}
+
+	/* Setup DMA if requested */
+	drv_data->tx_channel = -1;
+	drv_data->rx_channel = -1;
+	if (platform_info->enable_dma) {
+
+		/* Get two DMA channels	(rx and tx) */
+		drv_data->rx_channel = pxa_request_dma("pxa2xx_spi_ssp_rx",
+							DMA_PRIO_HIGH,
+							dma_handler,
+							drv_data);
+		if (drv_data->rx_channel < 0) {
+			dev_err(dev, "problem (%d) requesting rx channel\n",
+				drv_data->rx_channel);
+			status = -ENODEV;
+			goto out_error_irq_alloc;
+		}
+		drv_data->tx_channel = pxa_request_dma("pxa2xx_spi_ssp_tx",
+							DMA_PRIO_MEDIUM,
+							dma_handler,
+							drv_data);
+		if (drv_data->tx_channel < 0) {
+			dev_err(dev, "problem (%d) requesting tx channel\n",
+				drv_data->tx_channel);
+			status = -ENODEV;
+			goto out_error_dma_alloc;
+		}
+
+		if (drv_data->ioaddr == SSP1_VIRT) {
+				DRCMRRXSSDR = DRCMR_MAPVLD
+						| drv_data->rx_channel;
+				DRCMRTXSSDR = DRCMR_MAPVLD
+						| drv_data->tx_channel;
+		} else if (drv_data->ioaddr == SSP2_VIRT) {
+				DRCMRRXSS2DR = DRCMR_MAPVLD
+						| drv_data->rx_channel;
+				DRCMRTXSS2DR = DRCMR_MAPVLD
+						| drv_data->tx_channel;
+		} else if (drv_data->ioaddr == SSP3_VIRT) {
+				DRCMRRXSS3DR = DRCMR_MAPVLD
+						| drv_data->rx_channel;
+				DRCMRTXSS3DR = DRCMR_MAPVLD
+						| drv_data->tx_channel;
+		} else {
+			dev_err(dev, "bad SSP type\n");
+			goto out_error_dma_alloc;
+		}
+	}
+
+	/* Enable SOC clock */
+	pxa_set_cken(platform_info->clock_enable, 1);
+
+	/* Load default SSP configuration */
+	write_SSCR0(0, drv_data->ioaddr);
+	write_SSCR1(SSCR1_RxTresh(4) | SSCR1_TxTresh(12), drv_data->ioaddr);
+	write_SSCR0(SSCR0_SerClkDiv(2)
+			| SSCR0_Motorola
+			| SSCR0_DataSize(8),
+			drv_data->ioaddr);
+	if (drv_data->ssp_type != PXA25x_SSP)
+		write_SSTO(0, drv_data->ioaddr);
+	write_SSPSP(0, drv_data->ioaddr);
+
+	/* Initial and start queue */
+	status = init_queue(drv_data);
+	if (status != 0) {
+		dev_err(&pdev->dev, "problem initializing queue\n");
+		goto out_error_clock_enabled;
+	}
+	status = start_queue(drv_data);
+	if (status != 0) {
+		dev_err(&pdev->dev, "problem starting queue\n");
+		goto out_error_clock_enabled;
+	}
+
+	/* Register with the SPI framework */
+	platform_set_drvdata(pdev, drv_data);
+	status = spi_register_master(master);
+	if (status != 0) {
+		dev_err(&pdev->dev, "problem registering spi master\n");
+		goto out_error_queue_alloc;
+	}
+
+	return status;
+
+out_error_queue_alloc:
+	destroy_queue(drv_data);
+
+out_error_clock_enabled:
+	pxa_set_cken(platform_info->clock_enable, 0);
+
+out_error_dma_alloc:
+	if (drv_data->tx_channel != -1)
+		pxa_free_dma(drv_data->tx_channel);
+	if (drv_data->rx_channel != -1)
+		pxa_free_dma(drv_data->rx_channel);
+
+out_error_irq_alloc:
+	free_irq(irq, drv_data);
+
+out_error_master_alloc:
+	spi_master_put(master);
+	return status;
+}
+
+static int pxa2xx_spi_remove(struct platform_device *pdev)
+{
+	struct driver_data *drv_data = platform_get_drvdata(pdev);
+	int irq;
+	int status = 0;
+
+	if (!drv_data)
+		return 0;
+
+	/* Remove the queue */
+	status = destroy_queue(drv_data);
+	if (status != 0)
+		return status;
+
+	/* Disable the SSP at the peripheral and SOC level */
+	write_SSCR0(0, drv_data->ioaddr);
+	pxa_set_cken(drv_data->master_info->clock_enable, 0);
+
+	/* Release DMA */
+	if (drv_data->master_info->enable_dma) {
+		if (drv_data->ioaddr == SSP1_VIRT) {
+			DRCMRRXSSDR = 0;
+			DRCMRTXSSDR = 0;
+		} else if (drv_data->ioaddr == SSP2_VIRT) {
+			DRCMRRXSS2DR = 0;
+			DRCMRTXSS2DR = 0;
+		} else if (drv_data->ioaddr == SSP3_VIRT) {
+			DRCMRRXSS3DR = 0;
+			DRCMRTXSS3DR = 0;
+		}
+		pxa_free_dma(drv_data->tx_channel);
+		pxa_free_dma(drv_data->rx_channel);
+	}
+
+	/* Release IRQ */
+	irq = platform_get_irq(pdev, 0);
+	if (irq >= 0)
+		free_irq(irq, drv_data);
+
+	/* Disconnect from the SPI framework */
+	spi_unregister_master(drv_data->master);
+
+	/* Prevent double remove */
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static void pxa2xx_spi_shutdown(struct platform_device *pdev)
+{
+	int status = 0;
+
+	if ((status = pxa2xx_spi_remove(pdev)) != 0)
+		dev_err(&pdev->dev, "shutdown failed with %d\n", status);
+}
+
+#ifdef CONFIG_PM
+static int suspend_devices(struct device *dev, void *pm_message)
+{
+	pm_message_t *state = pm_message;
+
+	if (dev->power.power_state.event != state->event) {
+		dev_warn(dev, "pm state does not match request\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct driver_data *drv_data = platform_get_drvdata(pdev);
+	int status = 0;
+
+	/* Check all childern for current power state */
+	if (device_for_each_child(&pdev->dev, &state, suspend_devices) != 0) {
+		dev_warn(&pdev->dev, "suspend aborted\n");
+		return -1;
+	}
+
+	status = stop_queue(drv_data);
+	if (status != 0)
+		return status;
+	write_SSCR0(0, drv_data->ioaddr);
+	pxa_set_cken(drv_data->master_info->clock_enable, 0);
+
+	return 0;
+}
+
+static int pxa2xx_spi_resume(struct platform_device *pdev)
+{
+	struct driver_data *drv_data = platform_get_drvdata(pdev);
+	int status = 0;
+
+	/* Enable the SSP clock */
+	pxa_set_cken(drv_data->master_info->clock_enable, 1);
+
+	/* Start the queue running */
+	status = start_queue(drv_data);
+	if (status != 0) {
+		dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
+		return status;
+	}
+
+	return 0;
+}
+#else
+#define pxa2xx_spi_suspend NULL
+#define pxa2xx_spi_resume NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver driver = {
+	.driver = {
+		.name = "pxa2xx-spi",
+		.bus = &platform_bus_type,
+		.owner = THIS_MODULE,
+	},
+	.probe = pxa2xx_spi_probe,
+	.remove = __devexit_p(pxa2xx_spi_remove),
+	.shutdown = pxa2xx_spi_shutdown,
+	.suspend = pxa2xx_spi_suspend,
+	.resume = pxa2xx_spi_resume,
+};
+
+static int __init pxa2xx_spi_init(void)
+{
+	platform_driver_register(&driver);
+
+	return 0;
+}
+module_init(pxa2xx_spi_init);
+
+static void __exit pxa2xx_spi_exit(void)
+{
+	platform_driver_unregister(&driver);
+}
+module_exit(pxa2xx_spi_exit);