diff options
| author | Vladimir Oltean <vladimir.oltean@nxp.com> | 2020-03-04 23:00:34 +0100 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2020-03-05 15:06:15 +0100 |
| commit | 6d6af5796e5d9a88ae83c9c753023bba61deb18b (patch) | |
| tree | c2210b61cc760d82e1395ff8987f9ec4005de32c /drivers/spi/spi-fsl-dspi.c | |
| parent | spi: spi-fsl-dspi: Simplify bytes_per_word gymnastics (diff) | |
| download | linux-6d6af5796e5d9a88ae83c9c753023bba61deb18b.tar.xz linux-6d6af5796e5d9a88ae83c9c753023bba61deb18b.zip | |
spi: spi-fsl-dspi: Remove unused chip->void_write_data
This variable has been present since the initial submission of the
driver, and held, for some reason, the value of zero, to be sent on the
wire in the case there wasn't any TX buffer for the current transfer.
Since quite a while now, however, it isn't doing anything at all.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200304220044.11193-3-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/spi/spi-fsl-dspi.c')
| -rw-r--r-- | drivers/spi/spi-fsl-dspi.c | 6 |
1 files changed, 0 insertions, 6 deletions
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 896d7a0f45b0..63ec1d634d08 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -110,7 +110,6 @@ struct chip_data { u32 ctar_val; - u16 void_write_data; }; enum dspi_trans_mode { @@ -235,7 +234,6 @@ struct fsl_dspi { const void *tx; void *rx; void *rx_end; - u16 void_write_data; u16 tx_cmd; u8 bits_per_word; u8 bytes_per_word; @@ -795,8 +793,6 @@ static int dspi_transfer_one_message(struct spi_controller *ctlr, dspi->tx_cmd |= SPI_PUSHR_CMD_CONT; } - dspi->void_write_data = dspi->cur_chip->void_write_data; - dspi->tx = transfer->tx_buf; dspi->rx = transfer->rx_buf; dspi->rx_end = dspi->rx + transfer->len; @@ -897,8 +893,6 @@ static int dspi_setup(struct spi_device *spi) sck_cs_delay = pdata->sck_cs_delay; } - chip->void_write_data = 0; - clkrate = clk_get_rate(dspi->clk); hz_to_spi_baud(&pbr, &br, spi->max_speed_hz, clkrate); |