spi: reorganize drivers

Sort the SPI makefile and enforce the naming convention spi_*.c for
spi drivers.

This change also rolls the contents of atmel_spi.h into the .c file
since there is only one user of that particular include file.

v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be
      be the predominant pattern for subsystem prefixes.
    - Clean up filenames in Kconfig and header comment blocks

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 944 insertions, 0 deletions

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
new file mode 100644
index 000000000000..69d6dba67c19
--- /dev/null
+++ b/drivers/spi/spi-imx.c
@@ -0,0 +1,944 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 Juergen Beisert
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation
+ * 51 Franklin Street, Fifth Floor
+ * Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/types.h>
+
+#include <mach/spi.h>
+
+#define DRIVER_NAME "spi_imx"
+
+#define MXC_CSPIRXDATA		0x00
+#define MXC_CSPITXDATA		0x04
+#define MXC_CSPICTRL		0x08
+#define MXC_CSPIINT		0x0c
+#define MXC_RESET		0x1c
+
+#define MX3_CSPISTAT		0x14
+#define MX3_CSPISTAT_RR		(1 << 3)
+
+/* generic defines to abstract from the different register layouts */
+#define MXC_INT_RR	(1 << 0) /* Receive data ready interrupt */
+#define MXC_INT_TE	(1 << 1) /* Transmit FIFO empty interrupt */
+
+struct spi_imx_config {
+	unsigned int speed_hz;
+	unsigned int bpw;
+	unsigned int mode;
+	u8 cs;
+};
+
+enum spi_imx_devtype {
+	SPI_IMX_VER_IMX1,
+	SPI_IMX_VER_0_0,
+	SPI_IMX_VER_0_4,
+	SPI_IMX_VER_0_5,
+	SPI_IMX_VER_0_7,
+	SPI_IMX_VER_2_3,
+};
+
+struct spi_imx_data;
+
+struct spi_imx_devtype_data {
+	void (*intctrl)(struct spi_imx_data *, int);
+	int (*config)(struct spi_imx_data *, struct spi_imx_config *);
+	void (*trigger)(struct spi_imx_data *);
+	int (*rx_available)(struct spi_imx_data *);
+	void (*reset)(struct spi_imx_data *);
+	unsigned int fifosize;
+};
+
+struct spi_imx_data {
+	struct spi_bitbang bitbang;
+
+	struct completion xfer_done;
+	void *base;
+	int irq;
+	struct clk *clk;
+	unsigned long spi_clk;
+	int *chipselect;
+
+	unsigned int count;
+	void (*tx)(struct spi_imx_data *);
+	void (*rx)(struct spi_imx_data *);
+	void *rx_buf;
+	const void *tx_buf;
+	unsigned int txfifo; /* number of words pushed in tx FIFO */
+
+	struct spi_imx_devtype_data devtype_data;
+};
+
+#define MXC_SPI_BUF_RX(type)						\
+static void spi_imx_buf_rx_##type(struct spi_imx_data *spi_imx)		\
+{									\
+	unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA);	\
+									\
+	if (spi_imx->rx_buf) {						\
+		*(type *)spi_imx->rx_buf = val;				\
+		spi_imx->rx_buf += sizeof(type);			\
+	}								\
+}
+
+#define MXC_SPI_BUF_TX(type)						\
+static void spi_imx_buf_tx_##type(struct spi_imx_data *spi_imx)		\
+{									\
+	type val = 0;							\
+									\
+	if (spi_imx->tx_buf) {						\
+		val = *(type *)spi_imx->tx_buf;				\
+		spi_imx->tx_buf += sizeof(type);			\
+	}								\
+									\
+	spi_imx->count -= sizeof(type);					\
+									\
+	writel(val, spi_imx->base + MXC_CSPITXDATA);			\
+}
+
+MXC_SPI_BUF_RX(u8)
+MXC_SPI_BUF_TX(u8)
+MXC_SPI_BUF_RX(u16)
+MXC_SPI_BUF_TX(u16)
+MXC_SPI_BUF_RX(u32)
+MXC_SPI_BUF_TX(u32)
+
+/* First entry is reserved, second entry is valid only if SDHC_SPIEN is set
+ * (which is currently not the case in this driver)
+ */
+static int mxc_clkdivs[] = {0, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192,
+	256, 384, 512, 768, 1024};
+
+/* MX21, MX27 */
+static unsigned int spi_imx_clkdiv_1(unsigned int fin,
+		unsigned int fspi)
+{
+	int i, max;
+
+	if (cpu_is_mx21())
+		max = 18;
+	else
+		max = 16;
+
+	for (i = 2; i < max; i++)
+		if (fspi * mxc_clkdivs[i] >= fin)
+			return i;
+
+	return max;
+}
+
+/* MX1, MX31, MX35, MX51 CSPI */
+static unsigned int spi_imx_clkdiv_2(unsigned int fin,
+		unsigned int fspi)
+{
+	int i, div = 4;
+
+	for (i = 0; i < 7; i++) {
+		if (fspi * div >= fin)
+			return i;
+		div <<= 1;
+	}
+
+	return 7;
+}
+
+#define SPI_IMX2_3_CTRL		0x08
+#define SPI_IMX2_3_CTRL_ENABLE		(1 <<  0)
+#define SPI_IMX2_3_CTRL_XCH		(1 <<  2)
+#define SPI_IMX2_3_CTRL_MODE_MASK	(0xf << 4)
+#define SPI_IMX2_3_CTRL_POSTDIV_OFFSET	8
+#define SPI_IMX2_3_CTRL_PREDIV_OFFSET	12
+#define SPI_IMX2_3_CTRL_CS(cs)		((cs) << 18)
+#define SPI_IMX2_3_CTRL_BL_OFFSET	20
+
+#define SPI_IMX2_3_CONFIG	0x0c
+#define SPI_IMX2_3_CONFIG_SCLKPHA(cs)	(1 << ((cs) +  0))
+#define SPI_IMX2_3_CONFIG_SCLKPOL(cs)	(1 << ((cs) +  4))
+#define SPI_IMX2_3_CONFIG_SBBCTRL(cs)	(1 << ((cs) +  8))
+#define SPI_IMX2_3_CONFIG_SSBPOL(cs)	(1 << ((cs) + 12))
+
+#define SPI_IMX2_3_INT		0x10
+#define SPI_IMX2_3_INT_TEEN		(1 <<  0)
+#define SPI_IMX2_3_INT_RREN		(1 <<  3)
+
+#define SPI_IMX2_3_STAT		0x18
+#define SPI_IMX2_3_STAT_RR		(1 <<  3)
+
+/* MX51 eCSPI */
+static unsigned int spi_imx2_3_clkdiv(unsigned int fin, unsigned int fspi)
+{
+	/*
+	 * there are two 4-bit dividers, the pre-divider divides by
+	 * $pre, the post-divider by 2^$post
+	 */
+	unsigned int pre, post;
+
+	if (unlikely(fspi > fin))
+		return 0;
+
+	post = fls(fin) - fls(fspi);
+	if (fin > fspi << post)
+		post++;
+
+	/* now we have: (fin <= fspi << post) with post being minimal */
+
+	post = max(4U, post) - 4;
+	if (unlikely(post > 0xf)) {
+		pr_err("%s: cannot set clock freq: %u (base freq: %u)\n",
+				__func__, fspi, fin);
+		return 0xff;
+	}
+
+	pre = DIV_ROUND_UP(fin, fspi << post) - 1;
+
+	pr_debug("%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
+			__func__, fin, fspi, post, pre);
+	return (pre << SPI_IMX2_3_CTRL_PREDIV_OFFSET) |
+		(post << SPI_IMX2_3_CTRL_POSTDIV_OFFSET);
+}
+
+static void __maybe_unused spi_imx2_3_intctrl(struct spi_imx_data *spi_imx, int enable)
+{
+	unsigned val = 0;
+
+	if (enable & MXC_INT_TE)
+		val |= SPI_IMX2_3_INT_TEEN;
+
+	if (enable & MXC_INT_RR)
+		val |= SPI_IMX2_3_INT_RREN;
+
+	writel(val, spi_imx->base + SPI_IMX2_3_INT);
+}
+
+static void __maybe_unused spi_imx2_3_trigger(struct spi_imx_data *spi_imx)
+{
+	u32 reg;
+
+	reg = readl(spi_imx->base + SPI_IMX2_3_CTRL);
+	reg |= SPI_IMX2_3_CTRL_XCH;
+	writel(reg, spi_imx->base + SPI_IMX2_3_CTRL);
+}
+
+static int __maybe_unused spi_imx2_3_config(struct spi_imx_data *spi_imx,
+		struct spi_imx_config *config)
+{
+	u32 ctrl = SPI_IMX2_3_CTRL_ENABLE, cfg = 0;
+
+	/*
+	 * The hardware seems to have a race condition when changing modes. The
+	 * current assumption is that the selection of the channel arrives
+	 * earlier in the hardware than the mode bits when they are written at
+	 * the same time.
+	 * So set master mode for all channels as we do not support slave mode.
+	 */
+	ctrl |= SPI_IMX2_3_CTRL_MODE_MASK;
+
+	/* set clock speed */
+	ctrl |= spi_imx2_3_clkdiv(spi_imx->spi_clk, config->speed_hz);
+
+	/* set chip select to use */
+	ctrl |= SPI_IMX2_3_CTRL_CS(config->cs);
+
+	ctrl |= (config->bpw - 1) << SPI_IMX2_3_CTRL_BL_OFFSET;
+
+	cfg |= SPI_IMX2_3_CONFIG_SBBCTRL(config->cs);
+
+	if (config->mode & SPI_CPHA)
+		cfg |= SPI_IMX2_3_CONFIG_SCLKPHA(config->cs);
+
+	if (config->mode & SPI_CPOL)
+		cfg |= SPI_IMX2_3_CONFIG_SCLKPOL(config->cs);
+
+	if (config->mode & SPI_CS_HIGH)
+		cfg |= SPI_IMX2_3_CONFIG_SSBPOL(config->cs);
+
+	writel(ctrl, spi_imx->base + SPI_IMX2_3_CTRL);
+	writel(cfg, spi_imx->base + SPI_IMX2_3_CONFIG);
+
+	return 0;
+}
+
+static int __maybe_unused spi_imx2_3_rx_available(struct spi_imx_data *spi_imx)
+{
+	return readl(spi_imx->base + SPI_IMX2_3_STAT) & SPI_IMX2_3_STAT_RR;
+}
+
+static void __maybe_unused spi_imx2_3_reset(struct spi_imx_data *spi_imx)
+{
+	/* drain receive buffer */
+	while (spi_imx2_3_rx_available(spi_imx))
+		readl(spi_imx->base + MXC_CSPIRXDATA);
+}
+
+#define MX31_INTREG_TEEN	(1 << 0)
+#define MX31_INTREG_RREN	(1 << 3)
+
+#define MX31_CSPICTRL_ENABLE	(1 << 0)
+#define MX31_CSPICTRL_MASTER	(1 << 1)
+#define MX31_CSPICTRL_XCH	(1 << 2)
+#define MX31_CSPICTRL_POL	(1 << 4)
+#define MX31_CSPICTRL_PHA	(1 << 5)
+#define MX31_CSPICTRL_SSCTL	(1 << 6)
+#define MX31_CSPICTRL_SSPOL	(1 << 7)
+#define MX31_CSPICTRL_BC_SHIFT	8
+#define MX35_CSPICTRL_BL_SHIFT	20
+#define MX31_CSPICTRL_CS_SHIFT	24
+#define MX35_CSPICTRL_CS_SHIFT	12
+#define MX31_CSPICTRL_DR_SHIFT	16
+
+#define MX31_CSPISTATUS		0x14
+#define MX31_STATUS_RR		(1 << 3)
+
+/* These functions also work for the i.MX35, but be aware that
+ * the i.MX35 has a slightly different register layout for bits
+ * we do not use here.
+ */
+static void __maybe_unused mx31_intctrl(struct spi_imx_data *spi_imx, int enable)
+{
+	unsigned int val = 0;
+
+	if (enable & MXC_INT_TE)
+		val |= MX31_INTREG_TEEN;
+	if (enable & MXC_INT_RR)
+		val |= MX31_INTREG_RREN;
+
+	writel(val, spi_imx->base + MXC_CSPIINT);
+}
+
+static void __maybe_unused mx31_trigger(struct spi_imx_data *spi_imx)
+{
+	unsigned int reg;
+
+	reg = readl(spi_imx->base + MXC_CSPICTRL);
+	reg |= MX31_CSPICTRL_XCH;
+	writel(reg, spi_imx->base + MXC_CSPICTRL);
+}
+
+static int __maybe_unused spi_imx0_4_config(struct spi_imx_data *spi_imx,
+		struct spi_imx_config *config)
+{
+	unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
+	int cs = spi_imx->chipselect[config->cs];
+
+	reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) <<
+		MX31_CSPICTRL_DR_SHIFT;
+
+	reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT;
+
+	if (config->mode & SPI_CPHA)
+		reg |= MX31_CSPICTRL_PHA;
+	if (config->mode & SPI_CPOL)
+		reg |= MX31_CSPICTRL_POL;
+	if (config->mode & SPI_CS_HIGH)
+		reg |= MX31_CSPICTRL_SSPOL;
+	if (cs < 0)
+		reg |= (cs + 32) << MX31_CSPICTRL_CS_SHIFT;
+
+	writel(reg, spi_imx->base + MXC_CSPICTRL);
+
+	return 0;
+}
+
+static int __maybe_unused spi_imx0_7_config(struct spi_imx_data *spi_imx,
+		struct spi_imx_config *config)
+{
+	unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
+	int cs = spi_imx->chipselect[config->cs];
+
+	reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) <<
+		MX31_CSPICTRL_DR_SHIFT;
+
+	reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT;
+	reg |= MX31_CSPICTRL_SSCTL;
+
+	if (config->mode & SPI_CPHA)
+		reg |= MX31_CSPICTRL_PHA;
+	if (config->mode & SPI_CPOL)
+		reg |= MX31_CSPICTRL_POL;
+	if (config->mode & SPI_CS_HIGH)
+		reg |= MX31_CSPICTRL_SSPOL;
+	if (cs < 0)
+		reg |= (cs + 32) << MX35_CSPICTRL_CS_SHIFT;
+
+	writel(reg, spi_imx->base + MXC_CSPICTRL);
+
+	return 0;
+}
+
+static int __maybe_unused mx31_rx_available(struct spi_imx_data *spi_imx)
+{
+	return readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR;
+}
+
+static void __maybe_unused spi_imx0_4_reset(struct spi_imx_data *spi_imx)
+{
+	/* drain receive buffer */
+	while (readl(spi_imx->base + MX3_CSPISTAT) & MX3_CSPISTAT_RR)
+		readl(spi_imx->base + MXC_CSPIRXDATA);
+}
+
+#define MX27_INTREG_RR		(1 << 4)
+#define MX27_INTREG_TEEN	(1 << 9)
+#define MX27_INTREG_RREN	(1 << 13)
+
+#define MX27_CSPICTRL_POL	(1 << 5)
+#define MX27_CSPICTRL_PHA	(1 << 6)
+#define MX27_CSPICTRL_SSPOL	(1 << 8)
+#define MX27_CSPICTRL_XCH	(1 << 9)
+#define MX27_CSPICTRL_ENABLE	(1 << 10)
+#define MX27_CSPICTRL_MASTER	(1 << 11)
+#define MX27_CSPICTRL_DR_SHIFT	14
+#define MX27_CSPICTRL_CS_SHIFT	19
+
+static void __maybe_unused mx27_intctrl(struct spi_imx_data *spi_imx, int enable)
+{
+	unsigned int val = 0;
+
+	if (enable & MXC_INT_TE)
+		val |= MX27_INTREG_TEEN;
+	if (enable & MXC_INT_RR)
+		val |= MX27_INTREG_RREN;
+
+	writel(val, spi_imx->base + MXC_CSPIINT);
+}
+
+static void __maybe_unused mx27_trigger(struct spi_imx_data *spi_imx)
+{
+	unsigned int reg;
+
+	reg = readl(spi_imx->base + MXC_CSPICTRL);
+	reg |= MX27_CSPICTRL_XCH;
+	writel(reg, spi_imx->base + MXC_CSPICTRL);
+}
+
+static int __maybe_unused mx27_config(struct spi_imx_data *spi_imx,
+		struct spi_imx_config *config)
+{
+	unsigned int reg = MX27_CSPICTRL_ENABLE | MX27_CSPICTRL_MASTER;
+	int cs = spi_imx->chipselect[config->cs];
+
+	reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, config->speed_hz) <<
+		MX27_CSPICTRL_DR_SHIFT;
+	reg |= config->bpw - 1;
+
+	if (config->mode & SPI_CPHA)
+		reg |= MX27_CSPICTRL_PHA;
+	if (config->mode & SPI_CPOL)
+		reg |= MX27_CSPICTRL_POL;
+	if (config->mode & SPI_CS_HIGH)
+		reg |= MX27_CSPICTRL_SSPOL;
+	if (cs < 0)
+		reg |= (cs + 32) << MX27_CSPICTRL_CS_SHIFT;
+
+	writel(reg, spi_imx->base + MXC_CSPICTRL);
+
+	return 0;
+}
+
+static int __maybe_unused mx27_rx_available(struct spi_imx_data *spi_imx)
+{
+	return readl(spi_imx->base + MXC_CSPIINT) & MX27_INTREG_RR;
+}
+
+static void __maybe_unused spi_imx0_0_reset(struct spi_imx_data *spi_imx)
+{
+	writel(1, spi_imx->base + MXC_RESET);
+}
+
+#define MX1_INTREG_RR		(1 << 3)
+#define MX1_INTREG_TEEN		(1 << 8)
+#define MX1_INTREG_RREN		(1 << 11)
+
+#define MX1_CSPICTRL_POL	(1 << 4)
+#define MX1_CSPICTRL_PHA	(1 << 5)
+#define MX1_CSPICTRL_XCH	(1 << 8)
+#define MX1_CSPICTRL_ENABLE	(1 << 9)
+#define MX1_CSPICTRL_MASTER	(1 << 10)
+#define MX1_CSPICTRL_DR_SHIFT	13
+
+static void __maybe_unused mx1_intctrl(struct spi_imx_data *spi_imx, int enable)
+{
+	unsigned int val = 0;
+
+	if (enable & MXC_INT_TE)
+		val |= MX1_INTREG_TEEN;
+	if (enable & MXC_INT_RR)
+		val |= MX1_INTREG_RREN;
+
+	writel(val, spi_imx->base + MXC_CSPIINT);
+}
+
+static void __maybe_unused mx1_trigger(struct spi_imx_data *spi_imx)
+{
+	unsigned int reg;
+
+	reg = readl(spi_imx->base + MXC_CSPICTRL);
+	reg |= MX1_CSPICTRL_XCH;
+	writel(reg, spi_imx->base + MXC_CSPICTRL);
+}
+
+static int __maybe_unused mx1_config(struct spi_imx_data *spi_imx,
+		struct spi_imx_config *config)
+{
+	unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER;
+
+	reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) <<
+		MX1_CSPICTRL_DR_SHIFT;
+	reg |= config->bpw - 1;
+
+	if (config->mode & SPI_CPHA)
+		reg |= MX1_CSPICTRL_PHA;
+	if (config->mode & SPI_CPOL)
+		reg |= MX1_CSPICTRL_POL;
+
+	writel(reg, spi_imx->base + MXC_CSPICTRL);
+
+	return 0;
+}
+
+static int __maybe_unused mx1_rx_available(struct spi_imx_data *spi_imx)
+{
+	return readl(spi_imx->base + MXC_CSPIINT) & MX1_INTREG_RR;
+}
+
+static void __maybe_unused mx1_reset(struct spi_imx_data *spi_imx)
+{
+	writel(1, spi_imx->base + MXC_RESET);
+}
+
+/*
+ * These version numbers are taken from the Freescale driver.  Unfortunately it
+ * doesn't support i.MX1, so this entry doesn't match the scheme. :-(
+ */
+static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = {
+#ifdef CONFIG_SPI_IMX_VER_IMX1
+	[SPI_IMX_VER_IMX1] = {
+		.intctrl = mx1_intctrl,
+		.config = mx1_config,
+		.trigger = mx1_trigger,
+		.rx_available = mx1_rx_available,
+		.reset = mx1_reset,
+		.fifosize = 8,
+	},
+#endif
+#ifdef CONFIG_SPI_IMX_VER_0_0
+	[SPI_IMX_VER_0_0] = {
+		.intctrl = mx27_intctrl,
+		.config = mx27_config,
+		.trigger = mx27_trigger,
+		.rx_available = mx27_rx_available,
+		.reset = spi_imx0_0_reset,
+		.fifosize = 8,
+	},
+#endif
+#ifdef CONFIG_SPI_IMX_VER_0_4
+	[SPI_IMX_VER_0_4] = {
+		.intctrl = mx31_intctrl,
+		.config = spi_imx0_4_config,
+		.trigger = mx31_trigger,
+		.rx_available = mx31_rx_available,
+		.reset = spi_imx0_4_reset,
+		.fifosize = 8,
+	},
+#endif
+#ifdef CONFIG_SPI_IMX_VER_0_7
+	[SPI_IMX_VER_0_7] = {
+		.intctrl = mx31_intctrl,
+		.config = spi_imx0_7_config,
+		.trigger = mx31_trigger,
+		.rx_available = mx31_rx_available,
+		.reset = spi_imx0_4_reset,
+		.fifosize = 8,
+	},
+#endif
+#ifdef CONFIG_SPI_IMX_VER_2_3
+	[SPI_IMX_VER_2_3] = {
+		.intctrl = spi_imx2_3_intctrl,
+		.config = spi_imx2_3_config,
+		.trigger = spi_imx2_3_trigger,
+		.rx_available = spi_imx2_3_rx_available,
+		.reset = spi_imx2_3_reset,
+		.fifosize = 64,
+	},
+#endif
+};
+
+static void spi_imx_chipselect(struct spi_device *spi, int is_active)
+{
+	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
+	int gpio = spi_imx->chipselect[spi->chip_select];
+	int active = is_active != BITBANG_CS_INACTIVE;
+	int dev_is_lowactive = !(spi->mode & SPI_CS_HIGH);
+
+	if (gpio < 0)
+		return;
+
+	gpio_set_value(gpio, dev_is_lowactive ^ active);
+}
+
+static void spi_imx_push(struct spi_imx_data *spi_imx)
+{
+	while (spi_imx->txfifo < spi_imx->devtype_data.fifosize) {
+		if (!spi_imx->count)
+			break;
+		spi_imx->tx(spi_imx);
+		spi_imx->txfifo++;
+	}
+
+	spi_imx->devtype_data.trigger(spi_imx);
+}
+
+static irqreturn_t spi_imx_isr(int irq, void *dev_id)
+{
+	struct spi_imx_data *spi_imx = dev_id;
+
+	while (spi_imx->devtype_data.rx_available(spi_imx)) {
+		spi_imx->rx(spi_imx);
+		spi_imx->txfifo--;
+	}
+
+	if (spi_imx->count) {
+		spi_imx_push(spi_imx);
+		return IRQ_HANDLED;
+	}
+
+	if (spi_imx->txfifo) {
+		/* No data left to push, but still waiting for rx data,
+		 * enable receive data available interrupt.
+		 */
+		spi_imx->devtype_data.intctrl(
+				spi_imx, MXC_INT_RR);
+		return IRQ_HANDLED;
+	}
+
+	spi_imx->devtype_data.intctrl(spi_imx, 0);
+	complete(&spi_imx->xfer_done);
+
+	return IRQ_HANDLED;
+}
+
+static int spi_imx_setupxfer(struct spi_device *spi,
+				 struct spi_transfer *t)
+{
+	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
+	struct spi_imx_config config;
+
+	config.bpw = t ? t->bits_per_word : spi->bits_per_word;
+	config.speed_hz  = t ? t->speed_hz : spi->max_speed_hz;
+	config.mode = spi->mode;
+	config.cs = spi->chip_select;
+
+	if (!config.speed_hz)
+		config.speed_hz = spi->max_speed_hz;
+	if (!config.bpw)
+		config.bpw = spi->bits_per_word;
+	if (!config.speed_hz)
+		config.speed_hz = spi->max_speed_hz;
+
+	/* Initialize the functions for transfer */
+	if (config.bpw <= 8) {
+		spi_imx->rx = spi_imx_buf_rx_u8;
+		spi_imx->tx = spi_imx_buf_tx_u8;
+	} else if (config.bpw <= 16) {
+		spi_imx->rx = spi_imx_buf_rx_u16;
+		spi_imx->tx = spi_imx_buf_tx_u16;
+	} else if (config.bpw <= 32) {
+		spi_imx->rx = spi_imx_buf_rx_u32;
+		spi_imx->tx = spi_imx_buf_tx_u32;
+	} else
+		BUG();
+
+	spi_imx->devtype_data.config(spi_imx, &config);
+
+	return 0;
+}
+
+static int spi_imx_transfer(struct spi_device *spi,
+				struct spi_transfer *transfer)
+{
+	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
+
+	spi_imx->tx_buf = transfer->tx_buf;
+	spi_imx->rx_buf = transfer->rx_buf;
+	spi_imx->count = transfer->len;
+	spi_imx->txfifo = 0;
+
+	init_completion(&spi_imx->xfer_done);
+
+	spi_imx_push(spi_imx);
+
+	spi_imx->devtype_data.intctrl(spi_imx, MXC_INT_TE);
+
+	wait_for_completion(&spi_imx->xfer_done);
+
+	return transfer->len;
+}
+
+static int spi_imx_setup(struct spi_device *spi)
+{
+	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
+	int gpio = spi_imx->chipselect[spi->chip_select];
+
+	dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n", __func__,
+		 spi->mode, spi->bits_per_word, spi->max_speed_hz);
+
+	if (gpio >= 0)
+		gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH ? 0 : 1);
+
+	spi_imx_chipselect(spi, BITBANG_CS_INACTIVE);
+
+	return 0;
+}
+
+static void spi_imx_cleanup(struct spi_device *spi)
+{
+}
+
+static struct platform_device_id spi_imx_devtype[] = {
+	{
+		.name = "imx1-cspi",
+		.driver_data = SPI_IMX_VER_IMX1,
+	}, {
+		.name = "imx21-cspi",
+		.driver_data = SPI_IMX_VER_0_0,
+	}, {
+		.name = "imx25-cspi",
+		.driver_data = SPI_IMX_VER_0_7,
+	}, {
+		.name = "imx27-cspi",
+		.driver_data = SPI_IMX_VER_0_0,
+	}, {
+		.name = "imx31-cspi",
+		.driver_data = SPI_IMX_VER_0_4,
+	}, {
+		.name = "imx35-cspi",
+		.driver_data = SPI_IMX_VER_0_7,
+	}, {
+		.name = "imx51-cspi",
+		.driver_data = SPI_IMX_VER_0_7,
+	}, {
+		.name = "imx51-ecspi",
+		.driver_data = SPI_IMX_VER_2_3,
+	}, {
+		.name = "imx53-cspi",
+		.driver_data = SPI_IMX_VER_0_7,
+	}, {
+		.name = "imx53-ecspi",
+		.driver_data = SPI_IMX_VER_2_3,
+	}, {
+		/* sentinel */
+	}
+};
+
+static int __devinit spi_imx_probe(struct platform_device *pdev)
+{
+	struct spi_imx_master *mxc_platform_info;
+	struct spi_master *master;
+	struct spi_imx_data *spi_imx;
+	struct resource *res;
+	int i, ret;
+
+	mxc_platform_info = dev_get_platdata(&pdev->dev);
+	if (!mxc_platform_info) {
+		dev_err(&pdev->dev, "can't get the platform data\n");
+		return -EINVAL;
+	}
+
+	master = spi_alloc_master(&pdev->dev, sizeof(struct spi_imx_data));
+	if (!master)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, master);
+
+	master->bus_num = pdev->id;
+	master->num_chipselect = mxc_platform_info->num_chipselect;
+
+	spi_imx = spi_master_get_devdata(master);
+	spi_imx->bitbang.master = spi_master_get(master);
+	spi_imx->chipselect = mxc_platform_info->chipselect;
+
+	for (i = 0; i < master->num_chipselect; i++) {
+		if (spi_imx->chipselect[i] < 0)
+			continue;
+		ret = gpio_request(spi_imx->chipselect[i], DRIVER_NAME);
+		if (ret) {
+			while (i > 0) {
+				i--;
+				if (spi_imx->chipselect[i] >= 0)
+					gpio_free(spi_imx->chipselect[i]);
+			}
+			dev_err(&pdev->dev, "can't get cs gpios\n");
+			goto out_master_put;
+		}
+	}
+
+	spi_imx->bitbang.chipselect = spi_imx_chipselect;
+	spi_imx->bitbang.setup_transfer = spi_imx_setupxfer;
+	spi_imx->bitbang.txrx_bufs = spi_imx_transfer;
+	spi_imx->bitbang.master->setup = spi_imx_setup;
+	spi_imx->bitbang.master->cleanup = spi_imx_cleanup;
+	spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+
+	init_completion(&spi_imx->xfer_done);
+
+	spi_imx->devtype_data =
+		spi_imx_devtype_data[pdev->id_entry->driver_data];
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "can't get platform resource\n");
+		ret = -ENOMEM;
+		goto out_gpio_free;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+		dev_err(&pdev->dev, "request_mem_region failed\n");
+		ret = -EBUSY;
+		goto out_gpio_free;
+	}
+
+	spi_imx->base = ioremap(res->start, resource_size(res));
+	if (!spi_imx->base) {
+		ret = -EINVAL;
+		goto out_release_mem;
+	}
+
+	spi_imx->irq = platform_get_irq(pdev, 0);
+	if (spi_imx->irq < 0) {
+		ret = -EINVAL;
+		goto out_iounmap;
+	}
+
+	ret = request_irq(spi_imx->irq, spi_imx_isr, 0, DRIVER_NAME, spi_imx);
+	if (ret) {
+		dev_err(&pdev->dev, "can't get irq%d: %d\n", spi_imx->irq, ret);
+		goto out_iounmap;
+	}
+
+	spi_imx->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(spi_imx->clk)) {
+		dev_err(&pdev->dev, "unable to get clock\n");
+		ret = PTR_ERR(spi_imx->clk);
+		goto out_free_irq;
+	}
+
+	clk_enable(spi_imx->clk);
+	spi_imx->spi_clk = clk_get_rate(spi_imx->clk);
+
+	spi_imx->devtype_data.reset(spi_imx);
+
+	spi_imx->devtype_data.intctrl(spi_imx, 0);
+
+	ret = spi_bitbang_start(&spi_imx->bitbang);
+	if (ret) {
+		dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
+		goto out_clk_put;
+	}
+
+	dev_info(&pdev->dev, "probed\n");
+
+	return ret;
+
+out_clk_put:
+	clk_disable(spi_imx->clk);
+	clk_put(spi_imx->clk);
+out_free_irq:
+	free_irq(spi_imx->irq, spi_imx);
+out_iounmap:
+	iounmap(spi_imx->base);
+out_release_mem:
+	release_mem_region(res->start, resource_size(res));
+out_gpio_free:
+	for (i = 0; i < master->num_chipselect; i++)
+		if (spi_imx->chipselect[i] >= 0)
+			gpio_free(spi_imx->chipselect[i]);
+out_master_put:
+	spi_master_put(master);
+	kfree(master);
+	platform_set_drvdata(pdev, NULL);
+	return ret;
+}
+
+static int __devexit spi_imx_remove(struct platform_device *pdev)
+{
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
+	int i;
+
+	spi_bitbang_stop(&spi_imx->bitbang);
+
+	writel(0, spi_imx->base + MXC_CSPICTRL);
+	clk_disable(spi_imx->clk);
+	clk_put(spi_imx->clk);
+	free_irq(spi_imx->irq, spi_imx);
+	iounmap(spi_imx->base);
+
+	for (i = 0; i < master->num_chipselect; i++)
+		if (spi_imx->chipselect[i] >= 0)
+			gpio_free(spi_imx->chipselect[i]);
+
+	spi_master_put(master);
+
+	release_mem_region(res->start, resource_size(res));
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver spi_imx_driver = {
+	.driver = {
+		   .name = DRIVER_NAME,
+		   .owner = THIS_MODULE,
+		   },
+	.id_table = spi_imx_devtype,
+	.probe = spi_imx_probe,
+	.remove = __devexit_p(spi_imx_remove),
+};
+
+static int __init spi_imx_init(void)
+{
+	return platform_driver_register(&spi_imx_driver);
+}
+
+static void __exit spi_imx_exit(void)
+{
+	platform_driver_unregister(&spi_imx_driver);
+}
+
+module_init(spi_imx_init);
+module_exit(spi_imx_exit);
+
+MODULE_DESCRIPTION("SPI Master Controller driver");
+MODULE_AUTHOR("Sascha Hauer, Pengutronix");
+MODULE_LICENSE("GPL");