spi: reorganize drivers

Sort the SPI makefile and enforce the naming convention spi_*.c for
spi drivers.

This change also rolls the contents of atmel_spi.h into the .c file
since there is only one user of that particular include file.

v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be
      be the predominant pattern for subsystem prefixes.
    - Clean up filenames in Kconfig and header comment blocks

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 0 insertions, 116 deletions

diff --git a/drivers/spi/spi_s3c24xx_fiq.S b/drivers/spi/spi_s3c24xx_fiq.S
deleted file mode 100644
index 3793cae361db..000000000000
--- a/drivers/spi/spi_s3c24xx_fiq.S
+++ /dev/null
@@ -1,116 +0,0 @@
-/* linux/drivers/spi/spi_s3c24xx_fiq.S
- *
- * Copyright 2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX SPI - FIQ pseudo-DMA transfer code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-#include <mach/map.h>
-#include <mach/regs-irq.h>
-#include <plat/regs-spi.h>
-
-#include "spi_s3c24xx_fiq.h"
-
-	.text
-
-	@ entry to these routines is as follows, with the register names
-	@ defined in fiq.h so that they can be shared with the C files which
-	@ setup the calling registers.
-	@
-	@ fiq_rirq	The base of the IRQ registers to find S3C2410_SRCPND
-	@ fiq_rtmp	Temporary register to hold tx/rx data
-	@ fiq_rspi	The base of the SPI register block
-	@ fiq_rtx	The tx buffer pointer
-	@ fiq_rrx	The rx buffer pointer
-	@ fiq_rcount	The number of bytes to move
-
-	@ each entry starts with a word entry of how long it is
-	@ and an offset to the irq acknowledgment word
-
-ENTRY(s3c24xx_spi_fiq_rx)
-s3c24xx_spi_fix_rx:
-	.word	fiq_rx_end - fiq_rx_start
-	.word	fiq_rx_irq_ack - fiq_rx_start
-fiq_rx_start:
-	ldr	fiq_rtmp, fiq_rx_irq_ack
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
-
-	ldrb	fiq_rtmp, [ fiq_rspi, #  S3C2410_SPRDAT ]
-	strb	fiq_rtmp, [ fiq_rrx ], #1
-
-	mov	fiq_rtmp, #0xff
-	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
-
-	subs	fiq_rcount, fiq_rcount, #1
-	subnes	pc, lr, #4		@@ return, still have work to do
-
-	@@ set IRQ controller so that next op will trigger IRQ
-	mov	fiq_rtmp, #0
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD  - S3C24XX_VA_IRQ ]
-	subs	pc, lr, #4
-
-fiq_rx_irq_ack:
-	.word	0
-fiq_rx_end:
-
-ENTRY(s3c24xx_spi_fiq_txrx)
-s3c24xx_spi_fiq_txrx:
-	.word	fiq_txrx_end - fiq_txrx_start
-	.word	fiq_txrx_irq_ack - fiq_txrx_start
-fiq_txrx_start:
-
-	ldrb	fiq_rtmp, [ fiq_rspi, #  S3C2410_SPRDAT ]
-	strb	fiq_rtmp, [ fiq_rrx ], #1
-
-	ldr	fiq_rtmp, fiq_txrx_irq_ack
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
-
-	ldrb	fiq_rtmp, [ fiq_rtx ], #1
-	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
-
-	subs	fiq_rcount, fiq_rcount, #1
-	subnes	pc, lr, #4		@@ return, still have work to do
-
-	mov	fiq_rtmp, #0
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD  - S3C24XX_VA_IRQ ]
-	subs	pc, lr, #4
-
-fiq_txrx_irq_ack:
-	.word	0
-
-fiq_txrx_end:
-
-ENTRY(s3c24xx_spi_fiq_tx)
-s3c24xx_spi_fix_tx:
-	.word	fiq_tx_end - fiq_tx_start
-	.word	fiq_tx_irq_ack - fiq_tx_start
-fiq_tx_start:
-	ldrb	fiq_rtmp, [ fiq_rspi, #  S3C2410_SPRDAT ]
-
-	ldr	fiq_rtmp, fiq_tx_irq_ack
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
-
-	ldrb	fiq_rtmp, [ fiq_rtx ], #1
-	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
-
-	subs	fiq_rcount, fiq_rcount, #1
-	subnes	pc, lr, #4		@@ return, still have work to do
-
-	mov	fiq_rtmp, #0
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD  - S3C24XX_VA_IRQ ]
-	subs	pc, lr, #4
-
-fiq_tx_irq_ack:
-	.word	0
-
-fiq_tx_end:
-
-	.end