Merge tag 'v3.11-rc5' into spi-s3c64xx

Linux 3.11-rc5

4 files changed, 42 insertions, 1 deletions

diff --git a/drivers/spi/spi-altera.c b/drivers/spi/spi-altera.c
index 8a6bb37910da..81b9adb6e766 100644
--- a/drivers/spi/spi-altera.c
+++ b/drivers/spi/spi-altera.c
@@ -103,6 +103,16 @@ static void altera_spi_chipsel(struct spi_device *spi, int value)
 	}
 }
 
+static int altera_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t)
+{
+	return 0;
+}
+
+static int altera_spi_setup(struct spi_device *spi)
+{
+	return 0;
+}
+
 static inline unsigned int hw_txbyte(struct altera_spi *hw, int count)
 {
 	if (hw->tx) {
@@ -221,6 +231,7 @@ static int altera_spi_probe(struct platform_device *pdev)
 	master->bus_num = pdev->id;
 	master->num_chipselect = 16;
 	master->mode_bits = SPI_CS_HIGH;
+	master->setup = altera_spi_setup;
 
 	hw = spi_master_get_devdata(master);
 	platform_set_drvdata(pdev, hw);
@@ -229,6 +240,7 @@ static int altera_spi_probe(struct platform_device *pdev)
 	hw->bitbang.master = spi_master_get(master);
 	if (!hw->bitbang.master)
 		return err;
+	hw->bitbang.setup_transfer = altera_spi_setupxfer;
 	hw->bitbang.chipselect = altera_spi_chipsel;
 	hw->bitbang.txrx_bufs = altera_spi_txrx;
 
diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index 222d3e37fc28..707966bd5610 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -609,7 +609,7 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
 		else
 			buf = (void *)t->tx_buf;
 		t->tx_dma = dma_map_single(&spi->dev, buf,
-				t->len, DMA_FROM_DEVICE);
+				t->len, DMA_TO_DEVICE);
 		if (!t->tx_dma) {
 			ret = -EFAULT;
 			goto err_tx_map;
diff --git a/drivers/spi/spi-nuc900.c b/drivers/spi/spi-nuc900.c
index 2ad3d74ac021..150d85453c27 100644
--- a/drivers/spi/spi-nuc900.c
+++ b/drivers/spi/spi-nuc900.c
@@ -174,6 +174,17 @@ static void nuc900_spi_gobusy(struct nuc900_spi *hw)
 	spin_unlock_irqrestore(&hw->lock, flags);
 }
 
+static int nuc900_spi_setupxfer(struct spi_device *spi,
+				 struct spi_transfer *t)
+{
+	return 0;
+}
+
+static int nuc900_spi_setup(struct spi_device *spi)
+{
+	return 0;
+}
+
 static inline unsigned int hw_txbyte(struct nuc900_spi *hw, int count)
 {
 	return hw->tx ? hw->tx[count] : 0;
@@ -366,8 +377,10 @@ static int nuc900_spi_probe(struct platform_device *pdev)
 	master->num_chipselect     = hw->pdata->num_cs;
 	master->bus_num            = hw->pdata->bus_num;
 	hw->bitbang.master         = hw->master;
+	hw->bitbang.setup_transfer = nuc900_spi_setupxfer;
 	hw->bitbang.chipselect     = nuc900_spi_chipsel;
 	hw->bitbang.txrx_bufs      = nuc900_spi_txrx;
+	hw->bitbang.master->setup  = nuc900_spi_setup;
 
 	hw->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (hw->res == NULL) {
diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
index fb56fcfdf65e..09a942852593 100644
--- a/drivers/spi/spi-xilinx.c
+++ b/drivers/spi/spi-xilinx.c
@@ -233,6 +233,21 @@ static int xilinx_spi_setup_transfer(struct spi_device *spi,
 	return 0;
 }
 
+static int xilinx_spi_setup(struct spi_device *spi)
+{
+	/* always return 0, we can not check the number of bits.
+	 * There are cases when SPI setup is called before any driver is
+	 * there, in that case the SPI core defaults to 8 bits, which we
+	 * do not support in some cases. But if we return an error, the
+	 * SPI device would not be registered and no driver can get hold of it
+	 * When the driver is there, it will call SPI setup again with the
+	 * correct number of bits per transfer.
+	 * If a driver setups with the wrong bit number, it will fail when
+	 * it tries to do a transfer
+	 */
+	return 0;
+}
+
 static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi)
 {
 	u8 sr;
@@ -360,6 +375,7 @@ struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
 	xspi->bitbang.chipselect = xilinx_spi_chipselect;
 	xspi->bitbang.setup_transfer = xilinx_spi_setup_transfer;
 	xspi->bitbang.txrx_bufs = xilinx_spi_txrx_bufs;
+	xspi->bitbang.master->setup = xilinx_spi_setup;
 	init_completion(&xspi->done);
 
 	if (!request_mem_region(mem->start, resource_size(mem),