Merge commit 'v2.6.39' into spi/next

9 files changed, 21 insertions, 21 deletions

diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index 5a4e0afb9ad6..08de58e7f59f 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -661,7 +661,7 @@ static void readwriter(struct pl022 *pl022)
 {
 
 	/*
-	 * The FIFO depth is different inbetween primecell variants.
+	 * The FIFO depth is different between primecell variants.
 	 * I believe filling in too much in the FIFO might cause
 	 * errons in 8bit wide transfers on ARM variants (just 8 words
 	 * FIFO, means only 8x8 = 64 bits in FIFO) at least.
@@ -722,7 +722,7 @@ static void readwriter(struct pl022 *pl022)
 		 * This inner reader takes care of things appearing in the RX
 		 * FIFO as we're transmitting. This will happen a lot since the
 		 * clock starts running when you put things into the TX FIFO,
-		 * and then things are continously clocked into the RX FIFO.
+		 * and then things are continuously clocked into the RX FIFO.
 		 */
 		while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
 		       && (pl022->rx < pl022->rx_end)) {
@@ -842,7 +842,7 @@ static void dma_callback(void *data)
 
 	unmap_free_dma_scatter(pl022);
 
-	/* Update total bytes transfered */
+	/* Update total bytes transferred */
 	msg->actual_length += pl022->cur_transfer->len;
 	if (pl022->cur_transfer->cs_change)
 		pl022->cur_chip->
@@ -1224,7 +1224,7 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id)
 				 "number of bytes on a 16bit bus?)\n",
 				 (u32) (pl022->rx - pl022->rx_end));
 		}
-		/* Update total bytes transfered */
+		/* Update total bytes transferred */
 		msg->actual_length += pl022->cur_transfer->len;
 		if (pl022->cur_transfer->cs_change)
 			pl022->cur_chip->
@@ -1415,11 +1415,11 @@ static void do_polling_transfer(struct pl022 *pl022)
 		       SSP_CR1(pl022->virtbase));
 
 		dev_dbg(&pl022->adev->dev, "polling transfer ongoing ...\n");
-		/* FIXME: insert a timeout so we don't hang here indefinately */
+		/* FIXME: insert a timeout so we don't hang here indefinitely */
 		while (pl022->tx < pl022->tx_end || pl022->rx < pl022->rx_end)
 			readwriter(pl022);
 
-		/* Update total byte transfered */
+		/* Update total byte transferred */
 		message->actual_length += pl022->cur_transfer->len;
 		if (pl022->cur_transfer->cs_change)
 			pl022->cur_chip->cs_control(SSP_CHIP_DESELECT);
@@ -1555,7 +1555,7 @@ static int stop_queue(struct pl022 *pl022)
 	 * A wait_queue on the pl022->busy could be used, but then the common
 	 * execution path (pump_messages) would be required to call wake_up or
 	 * friends on every SPI message. Do this instead */
-	while (!list_empty(&pl022->queue) && pl022->busy && limit--) {
+	while ((!list_empty(&pl022->queue) || pl022->busy) && limit--) {
 		spin_unlock_irqrestore(&pl022->queue_lock, flags);
 		msleep(10);
 		spin_lock_irqsave(&pl022->queue_lock, flags);
@@ -2129,7 +2129,7 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
 			"probe - problem registering spi master\n");
 		goto err_spi_register;
 	}
-	dev_dbg(dev, "probe succeded\n");
+	dev_dbg(dev, "probe succeeded\n");
 	/*
 	 * Disable the silicon block pclk and any voltage domain and just
 	 * power it up and clock it when it's needed
@@ -2184,7 +2184,7 @@ pl022_remove(struct amba_device *adev)
 	spi_unregister_master(pl022->master);
 	spi_master_put(pl022->master);
 	amba_set_drvdata(adev, NULL);
-	dev_dbg(&adev->dev, "remove succeded\n");
+	dev_dbg(&adev->dev, "remove succeeded\n");
 	return 0;
 }
 
diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c
index 3c9ade69643f..b50563d320e1 100644
--- a/drivers/spi/au1550_spi.c
+++ b/drivers/spi/au1550_spi.c
@@ -480,7 +480,7 @@ static irqreturn_t au1550_spi_dma_irq_callback(struct au1550_spi *hw)
 		au1xxx_dbdma_stop(hw->dma_rx_ch);
 		au1xxx_dbdma_stop(hw->dma_tx_ch);
 
-		/* get number of transfered bytes */
+		/* get number of transferred bytes */
 		hw->rx_count = hw->len - au1xxx_get_dma_residue(hw->dma_rx_ch);
 		hw->tx_count = hw->len - au1xxx_get_dma_residue(hw->dma_tx_ch);
 
diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c
index 855ac4ae0f22..919fa9d9e16b 100644
--- a/drivers/spi/dw_spi.c
+++ b/drivers/spi/dw_spi.c
@@ -305,7 +305,7 @@ static void int_error_stop(struct dw_spi *dws, const char *msg)
 
 void dw_spi_xfer_done(struct dw_spi *dws)
 {
-	/* Update total byte transfered return count actual bytes read */
+	/* Update total byte transferred return count actual bytes read */
 	dws->cur_msg->actual_length += dws->len;
 
 	/* Move to next transfer */
@@ -752,7 +752,7 @@ static int stop_queue(struct dw_spi *dws)
 
 	spin_lock_irqsave(&dws->lock, flags);
 	dws->run = QUEUE_STOPPED;
-	while (!list_empty(&dws->queue) && dws->busy && limit--) {
+	while ((!list_empty(&dws->queue) || dws->busy) && limit--) {
 		spin_unlock_irqrestore(&dws->lock, flags);
 		msleep(10);
 		spin_lock_irqsave(&dws->lock, flags);
diff --git a/drivers/spi/dw_spi.h b/drivers/spi/dw_spi.h
index d8aac1f4c546..7a5e78d2a5cb 100644
--- a/drivers/spi/dw_spi.h
+++ b/drivers/spi/dw_spi.h
@@ -46,7 +46,7 @@
 #define SPI_INT_RXFI			(1 << 4)
 #define SPI_INT_MSTI			(1 << 5)
 
-/* TX RX interrupt level threshhold, max can be 256 */
+/* TX RX interrupt level threshold, max can be 256 */
 #define SPI_INT_THRESHOLD		32
 
 enum dw_ssi_type {
diff --git a/drivers/spi/ep93xx_spi.c b/drivers/spi/ep93xx_spi.c
index 0ba35df9a6df..d3570071e98f 100644
--- a/drivers/spi/ep93xx_spi.c
+++ b/drivers/spi/ep93xx_spi.c
@@ -512,7 +512,7 @@ static int ep93xx_spi_read_write(struct ep93xx_spi *espi)
  *
  * This function processes one SPI transfer given in @t. Function waits until
  * transfer is complete (may sleep) and updates @msg->status based on whether
- * transfer was succesfully processed or not.
+ * transfer was successfully processed or not.
  */
 static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi,
 					struct spi_message *msg,
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index a429b01d0285..dc25bee8d33f 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -700,7 +700,7 @@ static void int_transfer_complete(struct driver_data *drv_data)
 	if (!pxa25x_ssp_comp(drv_data))
 		write_SSTO(0, reg);
 
-	/* Update total byte transfered return count actual bytes read */
+	/* Update total byte transferred return count actual bytes read */
 	drv_data->cur_msg->actual_length += drv_data->len -
 				(drv_data->rx_end - drv_data->rx);
 
@@ -759,7 +759,7 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
 
 		/*
 		 * PXA25x_SSP has no timeout, set up rx threshould for the
-		 * remaing RX bytes.
+		 * remaining RX bytes.
 		 */
 		if (pxa25x_ssp_comp(drv_data)) {
 
@@ -1493,7 +1493,7 @@ static int stop_queue(struct driver_data *drv_data)
 	 * execution path (pump_messages) would be required to call wake_up or
 	 * friends on every SPI message. Do this instead */
 	drv_data->run = QUEUE_STOPPED;
-	while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
+	while ((!list_empty(&drv_data->queue) || drv_data->busy) && limit--) {
 		spin_unlock_irqrestore(&drv_data->lock, flags);
 		msleep(10);
 		spin_lock_irqsave(&drv_data->lock, flags);
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 34bb17f03019..82b9a428c323 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -957,7 +957,7 @@ EXPORT_SYMBOL_GPL(spi_sync);
  * drivers may DMA directly into and out of the message buffers.
  *
  * This call should be used by drivers that require exclusive access to the
- * SPI bus. It has to be preceeded by a spi_bus_lock call. The SPI bus must
+ * SPI bus. It has to be preceded by a spi_bus_lock call. The SPI bus must
  * be released by a spi_bus_unlock call when the exclusive access is over.
  *
  * It returns zero on success, else a negative error code.
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index a28462486df8..f706dba165cf 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -905,7 +905,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
 			"IO write error!\n");
 		message->state = ERROR_STATE;
 	} else {
-		/* Update total byte transfered */
+		/* Update total byte transferred */
 		message->actual_length += drv_data->len_in_bytes;
 		/* Move to next transfer of this msg */
 		message->state = bfin_spi_next_transfer(drv_data);
@@ -1284,7 +1284,7 @@ static inline int bfin_spi_stop_queue(struct bfin_spi_master_data *drv_data)
 	 * friends on every SPI message. Do this instead
 	 */
 	drv_data->running = false;
-	while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
+	while ((!list_empty(&drv_data->queue) || drv_data->busy) && limit--) {
 		spin_unlock_irqrestore(&drv_data->lock, flags);
 		msleep(10);
 		spin_lock_irqsave(&drv_data->lock, flags);
diff --git a/drivers/spi/spi_fsl_espi.c b/drivers/spi/spi_fsl_espi.c
index 900e921ab80e..496f895a0024 100644
--- a/drivers/spi/spi_fsl_espi.c
+++ b/drivers/spi/spi_fsl_espi.c
@@ -474,7 +474,7 @@ static int fsl_espi_setup(struct spi_device *spi)
 	mpc8xxx_spi = spi_master_get_devdata(spi->master);
 	reg_base = mpc8xxx_spi->reg_base;
 
-	hw_mode = cs->hw_mode; /* Save orginal settings */
+	hw_mode = cs->hw_mode; /* Save original settings */
 	cs->hw_mode = mpc8xxx_spi_read_reg(
 			&reg_base->csmode[spi->chip_select]);
 	/* mask out bits we are going to set */