Merge tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

 - Use the newly introduced 'hot' and 'critical' ops for the acpi
   thermal driver (Daniel Lezcano)

 - Remove the notify ops as it is no longer used (Daniel Lezcano)

 - Remove the 'forced passive' option and the unused bind/unbind
   functions (Daniel Lezcano)

 - Remove the THERMAL_TRIPS_NONE and the code cleanup around this macro
   (Daniel Lezcano)

 - Rework the delays to make them pre-computed instead of computing them
   again and again at each polling interval (Daniel Lezcano)

 - Remove the pointless 'thermal_zone_device_reset' function (Daniel
   Lezcano)

 - Use the critical and hot ops to prevent an unexpected system shutdown
   on int340x (Kai-Heng Feng)

 - Make the cooling device state private to the thermal subsystem
   (Daniel Lezcano)

 - Prevent to use not-power-aware actor devices with the power allocator
   governor (Lukasz Luba)

 - Remove 'zx' and 'tango' support along with the corresponding
   platforms (Arnd Bergman)

 - Fix several issues on the Omap thermal driver (Tony Lindgren)

 - Add support for adc-tm5 PMIC thermal monitor for Qcom platforms
   (Dmitry Baryshkov)

 - Fix an initialization loop in the adc-tm5 (Colin Ian King)

 - Fix a return error check in the cpufreq cooling device (Viresh Kumar)

* tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits)
  thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on error
  thermal: qcom: Fix comparison with uninitialized variable channels_available
  thermal: qcom: add support for adc-tm5 PMIC thermal monitor
  dt-bindings: thermal: qcom: add adc-thermal monitor bindings
  thermal: ti-soc-thermal: Use non-inverted define for omap4
  thermal: ti-soc-thermal: Simplify polling with iopoll
  thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430
  thermal: ti-soc-thermal: Skip pointless register access for dra7
  thermal/drivers/zx: Remove zx driver
  thermal/drivers/tango: Remove tango driver
  thermal: power allocator: fail binding for non-power actor devices
  thermal/core: Make cooling device state change private
  thermal: intel: pch: Fix unexpected shutdown at critical temperature
  thermal: int340x: Fix unexpected shutdown at critical temperature
  thermal/core: Remove pointless thermal_zone_device_reset() function
  thermal/core: Remove ms based delay fields
  thermal/core: Use precomputed jiffies for the polling
  thermal/core: Precompute the delays from msecs to jiffies
  thermal/core: Remove unused macro THERMAL_TRIPS_NONE
  thermal/core: Remove THERMAL_TRIPS_NONE test
  ...

1 files changed, 4 insertions, 2 deletions

diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index 2ce4b19f312a..f84375865c97 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -166,6 +166,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
 			     char *domain)
 {
 	struct ti_thermal_data *data;
+	int interval;
 
 	data = ti_bandgap_get_sensor_data(bgp, id);
 
@@ -183,9 +184,10 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
 		return PTR_ERR(data->ti_thermal);
 	}
 
+	interval = jiffies_to_msecs(data->ti_thermal->polling_delay_jiffies);
+
 	ti_bandgap_set_sensor_data(bgp, id, data);
-	ti_bandgap_write_update_interval(bgp, data->sensor_id,
-					data->ti_thermal->polling_delay);
+	ti_bandgap_write_update_interval(bgp, data->sensor_id, interval);
 
 	return 0;
 }