thermal/drivers/sun8i: Add thermal driver for H6/H5/H3/A64/A83T/R40

This patch adds the support for allwinner thermal sensor, within
allwinner SoC. It will register sensors for thermal framework
and use device tree to bind cooling device.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191219172823.1652600-2-anarsoul@gmail.com

3 files changed, 654 insertions, 0 deletions

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index dc36941aef6e..5a05db5438d6 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -280,6 +280,20 @@ config SPEAR_THERMAL
 	  Enable this to plug the SPEAr thermal sensor driver into the Linux
 	  thermal framework.
 
+config SUN8I_THERMAL
+	tristate "Allwinner sun8i thermal driver"
+	depends on ARCH_SUNXI || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on NVMEM
+	depends on OF
+	depends on RESET_CONTROLLER
+	help
+	  Support for the sun8i thermal sensor driver into the Linux thermal
+	  framework.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sun8i-thermal.
+
 config ROCKCHIP_THERMAL
 	tristate "Rockchip thermal driver"
 	depends on ARCH_ROCKCHIP || COMPILE_TEST
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index d502a597a717..9fb88e26fb10 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -32,6 +32,7 @@ thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o
 obj-y				+= broadcom/
 obj-$(CONFIG_THERMAL_MMIO)		+= thermal_mmio.o
 obj-$(CONFIG_SPEAR_THERMAL)	+= spear_thermal.o
+obj-$(CONFIG_SUN8I_THERMAL)     += sun8i_thermal.o
 obj-$(CONFIG_ROCKCHIP_THERMAL)	+= rockchip_thermal.o
 obj-$(CONFIG_RCAR_THERMAL)	+= rcar_thermal.o
 obj-$(CONFIG_RCAR_GEN3_THERMAL)	+= rcar_gen3_thermal.o
diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
new file mode 100644
index 000000000000..23a5f4aa4be4
--- /dev/null
+++ b/drivers/thermal/sun8i_thermal.c
@@ -0,0 +1,639 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Thermal sensor driver for Allwinner SOC
+ * Copyright (C) 2019 Yangtao Li
+ *
+ * Based on the work of Icenowy Zheng <icenowy@aosc.io>
+ * Based on the work of Ondrej Jirman <megous@megous.com>
+ * Based on the work of Josef Gajdusek <atx@atx.name>
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+
+#define MAX_SENSOR_NUM	4
+
+#define FT_TEMP_MASK				GENMASK(11, 0)
+#define TEMP_CALIB_MASK				GENMASK(11, 0)
+#define CALIBRATE_DEFAULT			0x800
+
+#define SUN8I_THS_CTRL0				0x00
+#define SUN8I_THS_CTRL2				0x40
+#define SUN8I_THS_IC				0x44
+#define SUN8I_THS_IS				0x48
+#define SUN8I_THS_MFC				0x70
+#define SUN8I_THS_TEMP_CALIB			0x74
+#define SUN8I_THS_TEMP_DATA			0x80
+
+#define SUN50I_THS_CTRL0			0x00
+#define SUN50I_H6_THS_ENABLE			0x04
+#define SUN50I_H6_THS_PC			0x08
+#define SUN50I_H6_THS_DIC			0x10
+#define SUN50I_H6_THS_DIS			0x20
+#define SUN50I_H6_THS_MFC			0x30
+#define SUN50I_H6_THS_TEMP_CALIB		0xa0
+#define SUN50I_H6_THS_TEMP_DATA			0xc0
+
+#define SUN8I_THS_CTRL0_T_ACQ0(x)		(GENMASK(15, 0) & (x))
+#define SUN8I_THS_CTRL2_T_ACQ1(x)		((GENMASK(15, 0) & (x)) << 16)
+#define SUN8I_THS_DATA_IRQ_STS(x)		BIT(x + 8)
+
+#define SUN50I_THS_CTRL0_T_ACQ(x)		((GENMASK(15, 0) & (x)) << 16)
+#define SUN50I_THS_FILTER_EN			BIT(2)
+#define SUN50I_THS_FILTER_TYPE(x)		(GENMASK(1, 0) & (x))
+#define SUN50I_H6_THS_PC_TEMP_PERIOD(x)		((GENMASK(19, 0) & (x)) << 12)
+#define SUN50I_H6_THS_DATA_IRQ_STS(x)		BIT(x)
+
+/* millidegree celsius */
+#define THS_EFUSE_CP_FT_MASK			0x3000
+#define THS_EFUSE_CP_FT_BIT			12
+#define THS_CALIBRATION_IN_FT			1
+
+struct tsensor {
+	struct ths_device		*tmdev;
+	struct thermal_zone_device	*tzd;
+	int				id;
+};
+
+struct ths_thermal_chip {
+	bool            has_mod_clk;
+	bool            has_bus_clk_reset;
+	int		sensor_num;
+	int		offset;
+	int		scale;
+	int		ft_deviation;
+	int		temp_data_base;
+	int		(*calibrate)(struct ths_device *tmdev,
+				     u16 *caldata, int callen);
+	int		(*init)(struct ths_device *tmdev);
+	int             (*irq_ack)(struct ths_device *tmdev);
+	int		(*calc_temp)(struct ths_device *tmdev,
+				     int id, int reg);
+};
+
+struct ths_device {
+	const struct ths_thermal_chip		*chip;
+	struct device				*dev;
+	struct regmap				*regmap;
+	struct reset_control			*reset;
+	struct clk				*bus_clk;
+	struct clk                              *mod_clk;
+	struct tsensor				sensor[MAX_SENSOR_NUM];
+	u32					cp_ft_flag;
+};
+
+/* Temp Unit: millidegree Celsius */
+static int sun8i_ths_calc_temp(struct ths_device *tmdev,
+			       int id, int reg)
+{
+	return tmdev->chip->offset - (reg * tmdev->chip->scale / 10);
+}
+
+static int sun50i_h5_calc_temp(struct ths_device *tmdev,
+			       int id, int reg)
+{
+	if (reg >= 0x500)
+		return -1191 * reg / 10 + 223000;
+	else if (!id)
+		return -1452 * reg / 10 + 259000;
+	else
+		return -1590 * reg / 10 + 276000;
+}
+
+static int sun8i_ths_get_temp(void *data, int *temp)
+{
+	struct tsensor *s = data;
+	struct ths_device *tmdev = s->tmdev;
+	int val = 0;
+
+	regmap_read(tmdev->regmap, tmdev->chip->temp_data_base +
+		    0x4 * s->id, &val);
+
+	/* ths have no data yet */
+	if (!val)
+		return -EAGAIN;
+
+	*temp = tmdev->chip->calc_temp(tmdev, s->id, val);
+	/*
+	 * According to the original sdk, there are some platforms(rarely)
+	 * that add a fixed offset value after calculating the temperature
+	 * value. We can't simply put it on the formula for calculating the
+	 * temperature above, because the formula for calculating the
+	 * temperature above is also used when the sensor is calibrated. If
+	 * do this, the correct calibration formula is hard to know.
+	 */
+	*temp += tmdev->chip->ft_deviation;
+
+	return 0;
+}
+
+static const struct thermal_zone_of_device_ops ths_ops = {
+	.get_temp = sun8i_ths_get_temp,
+};
+
+static const struct regmap_config config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.fast_io = true,
+	.max_register = 0xfc,
+};
+
+static int sun8i_h3_irq_ack(struct ths_device *tmdev)
+{
+	int i, state, ret = 0;
+
+	regmap_read(tmdev->regmap, SUN8I_THS_IS, &state);
+
+	for (i = 0; i < tmdev->chip->sensor_num; i++) {
+		if (state & SUN8I_THS_DATA_IRQ_STS(i)) {
+			regmap_write(tmdev->regmap, SUN8I_THS_IS,
+				     SUN8I_THS_DATA_IRQ_STS(i));
+			ret |= BIT(i);
+		}
+	}
+
+	return ret;
+}
+
+static int sun50i_h6_irq_ack(struct ths_device *tmdev)
+{
+	int i, state, ret = 0;
+
+	regmap_read(tmdev->regmap, SUN50I_H6_THS_DIS, &state);
+
+	for (i = 0; i < tmdev->chip->sensor_num; i++) {
+		if (state & SUN50I_H6_THS_DATA_IRQ_STS(i)) {
+			regmap_write(tmdev->regmap, SUN50I_H6_THS_DIS,
+				     SUN50I_H6_THS_DATA_IRQ_STS(i));
+			ret |= BIT(i);
+		}
+	}
+
+	return ret;
+}
+
+static irqreturn_t sun8i_irq_thread(int irq, void *data)
+{
+	struct ths_device *tmdev = data;
+	int i, state;
+
+	state = tmdev->chip->irq_ack(tmdev);
+
+	for (i = 0; i < tmdev->chip->sensor_num; i++) {
+		if (state & BIT(i))
+			thermal_zone_device_update(tmdev->sensor[i].tzd,
+						   THERMAL_EVENT_UNSPECIFIED);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int sun8i_h3_ths_calibrate(struct ths_device *tmdev,
+				  u16 *caldata, int callen)
+{
+	int i;
+
+	if (!caldata[0] || callen < 2 * tmdev->chip->sensor_num)
+		return -EINVAL;
+
+	for (i = 0; i < tmdev->chip->sensor_num; i++) {
+		int offset = (i % 2) << 4;
+
+		regmap_update_bits(tmdev->regmap,
+				   SUN8I_THS_TEMP_CALIB + (4 * (i >> 1)),
+				   0xfff << offset,
+				   caldata[i] << offset);
+	}
+
+	return 0;
+}
+
+static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
+				   u16 *caldata, int callen)
+{
+	struct device *dev = tmdev->dev;
+	int i, ft_temp;
+
+	if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num)
+		return -EINVAL;
+
+	/*
+	 * efuse layout:
+	 *
+	 *	0   11  16	 32
+	 *	+-------+-------+-------+
+	 *	|temp|  |sensor0|sensor1|
+	 *	+-------+-------+-------+
+	 *
+	 * The calibration data on the H6 is the ambient temperature and
+	 * sensor values that are filled during the factory test stage.
+	 *
+	 * The unit of stored FT temperature is 0.1 degreee celusis.
+	 *
+	 * We need to calculate a delta between measured and caluclated
+	 * register values and this will become a calibration offset.
+	 */
+	ft_temp = (caldata[0] & FT_TEMP_MASK) * 100;
+	tmdev->cp_ft_flag = (caldata[0] & THS_EFUSE_CP_FT_MASK)
+		>> THS_EFUSE_CP_FT_BIT;
+
+	for (i = 0; i < tmdev->chip->sensor_num; i++) {
+		int sensor_reg = caldata[i + 1];
+		int cdata, offset;
+		int sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);
+
+		/*
+		 * Calibration data is CALIBRATE_DEFAULT - (calculated
+		 * temperature from sensor reading at factory temperature
+		 * minus actual factory temperature) * 14.88 (scale from
+		 * temperature to register values)
+		 */
+		cdata = CALIBRATE_DEFAULT -
+			((sensor_temp - ft_temp) * 10 / tmdev->chip->scale);
+		if (cdata & ~TEMP_CALIB_MASK) {
+			/*
+			 * Calibration value more than 12-bit, but calibration
+			 * register is 12-bit. In this case, ths hardware can
+			 * still work without calibration, although the data
+			 * won't be so accurate.
+			 */
+			dev_warn(dev, "sensor%d is not calibrated.\n", i);
+			continue;
+		}
+
+		offset = (i % 2) * 16;
+		regmap_update_bits(tmdev->regmap,
+				   SUN50I_H6_THS_TEMP_CALIB + (i / 2 * 4),
+				   0xfff << offset,
+				   cdata << offset);
+	}
+
+	return 0;
+}
+
+static int sun8i_ths_calibrate(struct ths_device *tmdev)
+{
+	struct nvmem_cell *calcell;
+	struct device *dev = tmdev->dev;
+	u16 *caldata;
+	size_t callen;
+	int ret = 0;
+
+	calcell = devm_nvmem_cell_get(dev, "calibration");
+	if (IS_ERR(calcell)) {
+		if (PTR_ERR(calcell) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		/*
+		 * Even if the external calibration data stored in sid is
+		 * not accessible, the THS hardware can still work, although
+		 * the data won't be so accurate.
+		 *
+		 * The default value of calibration register is 0x800 for
+		 * every sensor, and the calibration value is usually 0x7xx
+		 * or 0x8xx, so they won't be away from the default value
+		 * for a lot.
+		 *
+		 * So here we do not return error if the calibartion data is
+		 * not available, except the probe needs deferring.
+		 */
+		goto out;
+	}
+
+	caldata = nvmem_cell_read(calcell, &callen);
+	if (IS_ERR(caldata)) {
+		ret = PTR_ERR(caldata);
+		goto out;
+	}
+
+	tmdev->chip->calibrate(tmdev, caldata, callen);
+
+	kfree(caldata);
+out:
+	return ret;
+}
+
+static int sun8i_ths_resource_init(struct ths_device *tmdev)
+{
+	struct device *dev = tmdev->dev;
+	struct platform_device *pdev = to_platform_device(dev);
+	void __iomem *base;
+	int ret;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	tmdev->regmap = devm_regmap_init_mmio(dev, base, &config);
+	if (IS_ERR(tmdev->regmap))
+		return PTR_ERR(tmdev->regmap);
+
+	if (tmdev->chip->has_bus_clk_reset) {
+		tmdev->reset = devm_reset_control_get(dev, 0);
+		if (IS_ERR(tmdev->reset))
+			return PTR_ERR(tmdev->reset);
+
+		tmdev->bus_clk = devm_clk_get(&pdev->dev, "bus");
+		if (IS_ERR(tmdev->bus_clk))
+			return PTR_ERR(tmdev->bus_clk);
+	}
+
+	if (tmdev->chip->has_mod_clk) {
+		tmdev->mod_clk = devm_clk_get(&pdev->dev, "mod");
+		if (IS_ERR(tmdev->mod_clk))
+			return PTR_ERR(tmdev->mod_clk);
+	}
+
+	ret = reset_control_deassert(tmdev->reset);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(tmdev->bus_clk);
+	if (ret)
+		goto assert_reset;
+
+	ret = clk_set_rate(tmdev->mod_clk, 24000000);
+	if (ret)
+		goto bus_disable;
+
+	ret = clk_prepare_enable(tmdev->mod_clk);
+	if (ret)
+		goto bus_disable;
+
+	ret = sun8i_ths_calibrate(tmdev);
+	if (ret)
+		goto mod_disable;
+
+	return 0;
+
+mod_disable:
+	clk_disable_unprepare(tmdev->mod_clk);
+bus_disable:
+	clk_disable_unprepare(tmdev->bus_clk);
+assert_reset:
+	reset_control_assert(tmdev->reset);
+
+	return ret;
+}
+
+static int sun8i_h3_thermal_init(struct ths_device *tmdev)
+{
+	int val;
+
+	/* average over 4 samples */
+	regmap_write(tmdev->regmap, SUN8I_THS_MFC,
+		     SUN50I_THS_FILTER_EN |
+		     SUN50I_THS_FILTER_TYPE(1));
+	/*
+	 * clkin = 24MHz
+	 * filter_samples = 4
+	 * period = 0.25s
+	 *
+	 * x = period * clkin / 4096 / filter_samples - 1
+	 *   = 365
+	 */
+	val = GENMASK(7 + tmdev->chip->sensor_num, 8);
+	regmap_write(tmdev->regmap, SUN8I_THS_IC,
+		     SUN50I_H6_THS_PC_TEMP_PERIOD(365) | val);
+	/*
+	 * T_acq = 20us
+	 * clkin = 24MHz
+	 *
+	 * x = T_acq * clkin - 1
+	 *   = 479
+	 */
+	regmap_write(tmdev->regmap, SUN8I_THS_CTRL0,
+		     SUN8I_THS_CTRL0_T_ACQ0(479));
+	val = GENMASK(tmdev->chip->sensor_num - 1, 0);
+	regmap_write(tmdev->regmap, SUN8I_THS_CTRL2,
+		     SUN8I_THS_CTRL2_T_ACQ1(479) | val);
+
+	return 0;
+}
+
+/*
+ * Without this undocummented value, the returned temperatures would
+ * be higher than real ones by about 20C.
+ */
+#define SUN50I_H6_CTRL0_UNK 0x0000002f
+
+static int sun50i_h6_thermal_init(struct ths_device *tmdev)
+{
+	int val;
+
+	/*
+	 * T_acq = 20us
+	 * clkin = 24MHz
+	 *
+	 * x = T_acq * clkin - 1
+	 *   = 479
+	 */
+	regmap_write(tmdev->regmap, SUN50I_THS_CTRL0,
+		     SUN50I_H6_CTRL0_UNK | SUN50I_THS_CTRL0_T_ACQ(479));
+	/* average over 4 samples */
+	regmap_write(tmdev->regmap, SUN50I_H6_THS_MFC,
+		     SUN50I_THS_FILTER_EN |
+		     SUN50I_THS_FILTER_TYPE(1));
+	/*
+	 * clkin = 24MHz
+	 * filter_samples = 4
+	 * period = 0.25s
+	 *
+	 * x = period * clkin / 4096 / filter_samples - 1
+	 *   = 365
+	 */
+	regmap_write(tmdev->regmap, SUN50I_H6_THS_PC,
+		     SUN50I_H6_THS_PC_TEMP_PERIOD(365));
+	/* enable sensor */
+	val = GENMASK(tmdev->chip->sensor_num - 1, 0);
+	regmap_write(tmdev->regmap, SUN50I_H6_THS_ENABLE, val);
+	/* thermal data interrupt enable */
+	val = GENMASK(tmdev->chip->sensor_num - 1, 0);
+	regmap_write(tmdev->regmap, SUN50I_H6_THS_DIC, val);
+
+	return 0;
+}
+
+static int sun8i_ths_register(struct ths_device *tmdev)
+{
+	int i;
+
+	for (i = 0; i < tmdev->chip->sensor_num; i++) {
+		tmdev->sensor[i].tmdev = tmdev;
+		tmdev->sensor[i].id = i;
+		tmdev->sensor[i].tzd =
+			devm_thermal_zone_of_sensor_register(tmdev->dev,
+							     i,
+							     &tmdev->sensor[i],
+							     &ths_ops);
+		if (IS_ERR(tmdev->sensor[i].tzd))
+			return PTR_ERR(tmdev->sensor[i].tzd);
+	}
+
+	return 0;
+}
+
+static int sun8i_ths_probe(struct platform_device *pdev)
+{
+	struct ths_device *tmdev;
+	struct device *dev = &pdev->dev;
+	int ret, irq;
+
+	tmdev = devm_kzalloc(dev, sizeof(*tmdev), GFP_KERNEL);
+	if (!tmdev)
+		return -ENOMEM;
+
+	tmdev->dev = dev;
+	tmdev->chip = of_device_get_match_data(&pdev->dev);
+	if (!tmdev->chip)
+		return -EINVAL;
+
+	platform_set_drvdata(pdev, tmdev);
+
+	ret = sun8i_ths_resource_init(tmdev);
+	if (ret)
+		return ret;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ret = tmdev->chip->init(tmdev);
+	if (ret)
+		return ret;
+
+	ret = sun8i_ths_register(tmdev);
+	if (ret)
+		return ret;
+
+	/*
+	 * Avoid entering the interrupt handler, the thermal device is not
+	 * registered yet, we deffer the registration of the interrupt to
+	 * the end.
+	 */
+	ret = devm_request_threaded_irq(dev, irq, NULL,
+					sun8i_irq_thread,
+					IRQF_ONESHOT, "ths", tmdev);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int sun8i_ths_remove(struct platform_device *pdev)
+{
+	struct ths_device *tmdev = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(tmdev->mod_clk);
+	clk_disable_unprepare(tmdev->bus_clk);
+	reset_control_assert(tmdev->reset);
+
+	return 0;
+}
+
+static const struct ths_thermal_chip sun8i_a83t_ths = {
+	.sensor_num = 3,
+	.scale = 705,
+	.offset = 191668,
+	.temp_data_base = SUN8I_THS_TEMP_DATA,
+	.calibrate = sun8i_h3_ths_calibrate,
+	.init = sun8i_h3_thermal_init,
+	.irq_ack = sun8i_h3_irq_ack,
+	.calc_temp = sun8i_ths_calc_temp,
+};
+
+static const struct ths_thermal_chip sun8i_h3_ths = {
+	.sensor_num = 1,
+	.scale = 1211,
+	.offset = 217000,
+	.has_mod_clk = true,
+	.has_bus_clk_reset = true,
+	.temp_data_base = SUN8I_THS_TEMP_DATA,
+	.calibrate = sun8i_h3_ths_calibrate,
+	.init = sun8i_h3_thermal_init,
+	.irq_ack = sun8i_h3_irq_ack,
+	.calc_temp = sun8i_ths_calc_temp,
+};
+
+static const struct ths_thermal_chip sun8i_r40_ths = {
+	.sensor_num = 3,
+	.offset = 251086,
+	.scale = 1130,
+	.has_mod_clk = true,
+	.has_bus_clk_reset = true,
+	.temp_data_base = SUN8I_THS_TEMP_DATA,
+	.calibrate = sun8i_h3_ths_calibrate,
+	.init = sun8i_h3_thermal_init,
+	.irq_ack = sun8i_h3_irq_ack,
+	.calc_temp = sun8i_ths_calc_temp,
+};
+
+static const struct ths_thermal_chip sun50i_a64_ths = {
+	.sensor_num = 3,
+	.offset = 260890,
+	.scale = 1170,
+	.has_mod_clk = true,
+	.has_bus_clk_reset = true,
+	.temp_data_base = SUN8I_THS_TEMP_DATA,
+	.calibrate = sun8i_h3_ths_calibrate,
+	.init = sun8i_h3_thermal_init,
+	.irq_ack = sun8i_h3_irq_ack,
+	.calc_temp = sun8i_ths_calc_temp,
+};
+
+static const struct ths_thermal_chip sun50i_h5_ths = {
+	.sensor_num = 2,
+	.has_mod_clk = true,
+	.has_bus_clk_reset = true,
+	.temp_data_base = SUN8I_THS_TEMP_DATA,
+	.calibrate = sun8i_h3_ths_calibrate,
+	.init = sun8i_h3_thermal_init,
+	.irq_ack = sun8i_h3_irq_ack,
+	.calc_temp = sun50i_h5_calc_temp,
+};
+
+static const struct ths_thermal_chip sun50i_h6_ths = {
+	.sensor_num = 2,
+	.has_bus_clk_reset = true,
+	.ft_deviation = 7000,
+	.offset = 187744,
+	.scale = 672,
+	.temp_data_base = SUN50I_H6_THS_TEMP_DATA,
+	.calibrate = sun50i_h6_ths_calibrate,
+	.init = sun50i_h6_thermal_init,
+	.irq_ack = sun50i_h6_irq_ack,
+	.calc_temp = sun8i_ths_calc_temp,
+};
+
+static const struct of_device_id of_ths_match[] = {
+	{ .compatible = "allwinner,sun8i-a83t-ths", .data = &sun8i_a83t_ths },
+	{ .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths },
+	{ .compatible = "allwinner,sun8i-r40-ths", .data = &sun8i_r40_ths },
+	{ .compatible = "allwinner,sun50i-a64-ths", .data = &sun50i_a64_ths },
+	{ .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths },
+	{ .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, of_ths_match);
+
+static struct platform_driver ths_driver = {
+	.probe = sun8i_ths_probe,
+	.remove = sun8i_ths_remove,
+	.driver = {
+		.name = "sun8i-thermal",
+		.of_match_table = of_ths_match,
+	},
+};
+module_platform_driver(ths_driver);
+
+MODULE_DESCRIPTION("Thermal sensor driver for Allwinner SOC");
+MODULE_LICENSE("GPL v2");