thunderbolt: Add support for NHI mailbox

The host controller includes two sets of registers that are used to
communicate with the firmware. Add functions that can be used to access
these registers.

This code is based on the work done by Amir Levy and Michael Jamet.

Signed-off-by: Michael Jamet <michael.jamet@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 58 insertions, 0 deletions

diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c
index fa4c2745dba2..c358c074f925 100644
--- a/drivers/thunderbolt/nhi.c
+++ b/drivers/thunderbolt/nhi.c
@@ -14,6 +14,7 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/dmi.h>
+#include <linux/delay.h>
 
 #include "nhi.h"
 #include "nhi_regs.h"
@@ -28,6 +29,8 @@
 #define MSIX_MIN_VECS		6
 #define MSIX_MAX_VECS		16
 
+#define NHI_MAILBOX_TIMEOUT	500 /* ms */
+
 static int ring_interrupt_index(struct tb_ring *ring)
 {
 	int bit = ring->hop;
@@ -525,6 +528,61 @@ void ring_free(struct tb_ring *ring)
 	kfree(ring);
 }
 
+/**
+ * nhi_mailbox_cmd() - Send a command through NHI mailbox
+ * @nhi: Pointer to the NHI structure
+ * @cmd: Command to send
+ * @data: Data to be send with the command
+ *
+ * Sends mailbox command to the firmware running on NHI. Returns %0 in
+ * case of success and negative errno in case of failure.
+ */
+int nhi_mailbox_cmd(struct tb_nhi *nhi, enum nhi_mailbox_cmd cmd, u32 data)
+{
+	ktime_t timeout;
+	u32 val;
+
+	iowrite32(data, nhi->iobase + REG_INMAIL_DATA);
+
+	val = ioread32(nhi->iobase + REG_INMAIL_CMD);
+	val &= ~(REG_INMAIL_CMD_MASK | REG_INMAIL_ERROR);
+	val |= REG_INMAIL_OP_REQUEST | cmd;
+	iowrite32(val, nhi->iobase + REG_INMAIL_CMD);
+
+	timeout = ktime_add_ms(ktime_get(), NHI_MAILBOX_TIMEOUT);
+	do {
+		val = ioread32(nhi->iobase + REG_INMAIL_CMD);
+		if (!(val & REG_INMAIL_OP_REQUEST))
+			break;
+		usleep_range(10, 20);
+	} while (ktime_before(ktime_get(), timeout));
+
+	if (val & REG_INMAIL_OP_REQUEST)
+		return -ETIMEDOUT;
+	if (val & REG_INMAIL_ERROR)
+		return -EIO;
+
+	return 0;
+}
+
+/**
+ * nhi_mailbox_mode() - Return current firmware operation mode
+ * @nhi: Pointer to the NHI structure
+ *
+ * The function reads current firmware operation mode using NHI mailbox
+ * registers and returns it to the caller.
+ */
+enum nhi_fw_mode nhi_mailbox_mode(struct tb_nhi *nhi)
+{
+	u32 val;
+
+	val = ioread32(nhi->iobase + REG_OUTMAIL_CMD);
+	val &= REG_OUTMAIL_CMD_OPMODE_MASK;
+	val >>= REG_OUTMAIL_CMD_OPMODE_SHIFT;
+
+	return (enum nhi_fw_mode)val;
+}
+
 static void nhi_interrupt_work(struct work_struct *work)
 {
 	struct tb_nhi *nhi = container_of(work, typeof(*nhi), interrupt_work);