diff options
| author | Mika Westerberg <mika.westerberg@linux.intel.com> | 2019-03-21 18:03:00 +0100 |
|---|---|---|
| committer | Mika Westerberg <mika.westerberg@linux.intel.com> | 2019-11-02 10:13:31 +0100 |
| commit | 91c0c12080d0f40ee7275485221b06b4e1e289e1 (patch) | |
| tree | 70e4119a7d77b11586f811906af5c8ab66ae7adc /drivers/thunderbolt/tb_regs.h | |
| parent | thunderbolt: Refactor add_switch() into two functions (diff) | |
| download | linux-91c0c12080d0f40ee7275485221b06b4e1e289e1.tar.xz linux-91c0c12080d0f40ee7275485221b06b4e1e289e1.zip | |
thunderbolt: Add support for lane bonding
Lane bonding allows aggregating two 10/20 Gb/s (depending on the
generation) lanes into a single 20/40 Gb/s bonded link. This allows
sharing the full bandwidth more efficiently. In order to establish lane
bonding we need to check that lane bonding is possible through link
controller and that both ends of the link actually supports 2x widths.
This also means that all the paths should be established through the
primary port so update tb_path_alloc() to handle this as well.
Lane bonding is supported starting from Falcon Ridge (2nd generation)
controllers.
We also expose the current speed and number of lanes under each device
except the host router following similar attribute naming than USB bus.
Expose speed and number of lanes for both directions to allow possibility
of asymmetric link in the future.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Diffstat (limited to 'drivers/thunderbolt/tb_regs.h')
| -rw-r--r-- | drivers/thunderbolt/tb_regs.h | 20 |
1 files changed, 20 insertions, 0 deletions
diff --git a/drivers/thunderbolt/tb_regs.h b/drivers/thunderbolt/tb_regs.h index faa14b3df83c..3a39490a954b 100644 --- a/drivers/thunderbolt/tb_regs.h +++ b/drivers/thunderbolt/tb_regs.h @@ -220,6 +220,23 @@ struct tb_regs_port_header { #define ADP_CS_5_LCA_MASK GENMASK(28, 22) #define ADP_CS_5_LCA_SHIFT 22 +/* Lane adapter registers */ +#define LANE_ADP_CS_0 0x00 +#define LANE_ADP_CS_0_SUPPORTED_WIDTH_MASK GENMASK(25, 20) +#define LANE_ADP_CS_0_SUPPORTED_WIDTH_SHIFT 20 +#define LANE_ADP_CS_1 0x01 +#define LANE_ADP_CS_1_TARGET_WIDTH_MASK GENMASK(9, 4) +#define LANE_ADP_CS_1_TARGET_WIDTH_SHIFT 4 +#define LANE_ADP_CS_1_TARGET_WIDTH_SINGLE 0x1 +#define LANE_ADP_CS_1_TARGET_WIDTH_DUAL 0x3 +#define LANE_ADP_CS_1_LB BIT(15) +#define LANE_ADP_CS_1_CURRENT_SPEED_MASK GENMASK(19, 16) +#define LANE_ADP_CS_1_CURRENT_SPEED_SHIFT 16 +#define LANE_ADP_CS_1_CURRENT_SPEED_GEN2 0x8 +#define LANE_ADP_CS_1_CURRENT_SPEED_GEN3 0x4 +#define LANE_ADP_CS_1_CURRENT_WIDTH_MASK GENMASK(25, 20) +#define LANE_ADP_CS_1_CURRENT_WIDTH_SHIFT 20 + /* Display Port adapter registers */ #define ADP_DP_CS_0 0x00 #define ADP_DP_CS_0_VIDEO_HOPID_MASK GENMASK(26, 16) @@ -277,6 +294,9 @@ struct tb_regs_hop { #define TB_LC_FUSE 0x03 /* Link controller registers */ +#define TB_LC_PORT_ATTR 0x8d +#define TB_LC_PORT_ATTR_BE BIT(12) + #define TB_LC_SX_CTRL 0x96 #define TB_LC_SX_CTRL_L1C BIT(16) #define TB_LC_SX_CTRL_L2C BIT(20) |