thunderbolt: Add USB4 port devices

Create devices for each USB4 port. This is needed when we add retimer
access when there is no device connected but may be useful for other
purposes too following what USB subsystem does. This exports a single
attribute "link" that shows the type of the USB4 link (or "none" if
there is no cable connected).

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 54 insertions, 0 deletions

diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c
index 94cc25cc6388..1f82af35328e 100644
--- a/drivers/thunderbolt/usb4.c
+++ b/drivers/thunderbolt/usb4.c
@@ -986,6 +986,60 @@ struct tb_port *usb4_switch_map_usb3_down(struct tb_switch *sw,
 }
 
 /**
+ * usb4_switch_add_ports() - Add USB4 ports for this router
+ * @sw: USB4 router
+ *
+ * For USB4 router finds all USB4 ports and registers devices for each.
+ * Can be called to any router.
+ *
+ * Return %0 in case of success and negative errno in case of failure.
+ */
+int usb4_switch_add_ports(struct tb_switch *sw)
+{
+	struct tb_port *port;
+
+	if (tb_switch_is_icm(sw) || !tb_switch_is_usb4(sw))
+		return 0;
+
+	tb_switch_for_each_port(sw, port) {
+		struct usb4_port *usb4;
+
+		if (!tb_port_is_null(port))
+			continue;
+		if (!port->cap_usb4)
+			continue;
+
+		usb4 = usb4_port_device_add(port);
+		if (IS_ERR(usb4)) {
+			usb4_switch_remove_ports(sw);
+			return PTR_ERR(usb4);
+		}
+
+		port->usb4 = usb4;
+	}
+
+	return 0;
+}
+
+/**
+ * usb4_switch_remove_ports() - Removes USB4 ports from this router
+ * @sw: USB4 router
+ *
+ * Unregisters previously registered USB4 ports.
+ */
+void usb4_switch_remove_ports(struct tb_switch *sw)
+{
+	struct tb_port *port;
+
+	tb_switch_for_each_port(sw, port) {
+		if (port->usb4) {
+			usb4_port_device_remove(port->usb4);
+			port->usb4 = NULL;
+		}
+	}
+}
+
+/**
  * usb4_port_unlock() - Unlock USB4 downstream port
  * @port: USB4 port to unlock
  *