Merge tag 'thunderbolt-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next

Mika writes:

thunderbolt: Changes for v6.10 merge window

This includes following USB4/Thunderbolt changes for the v6.10 merge
window:

  - Enable NVM firmare upgrade on Intel Maple Ridge Thunderbolt 4
    controller
  - Improve USB3 tunnel bandwidth calculation
  - Improve sideband access
  - Minor cleanups and fixes.

All these have been in linux-next with no reported issues.

* tag 'thunderbolt-for-v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
  thunderbolt: Correct trace output of firmware connection manager packets
  thunderbolt: Fix kernel-doc for tb_tunnel_alloc_dp()
  thunderbolt: Fix uninitialized variable in tb_tunnel_alloc_usb3()
  thunderbolt: There are only 5 basic router registers in pre-USB4 routers
  thunderbolt: No need to loop over all retimers if access fails
  thunderbolt: Increase sideband access polling delay
  thunderbolt: Get rid of TB_CFG_PKG_PREPARE_TO_SLEEP
  thunderbolt: Use correct error code with ERROR_NOT_SUPPORTED
  thunderbolt: Allow USB3 bandwidth to be lower than maximum supported
  thunderbolt: Fix calculation of consumed USB3 bandwidth on a path
  thunderbolt: Enable NVM upgrade support on Intel Maple Ridge

9 files changed, 59 insertions, 47 deletions

diff --git a/drivers/thunderbolt/debugfs.c b/drivers/thunderbolt/debugfs.c
index e324cd899719..193e9dfc983b 100644
--- a/drivers/thunderbolt/debugfs.c
+++ b/drivers/thunderbolt/debugfs.c
@@ -1346,7 +1346,7 @@ static int switch_basic_regs_show(struct tb_switch *sw, struct seq_file *s)
 	if (tb_switch_is_usb4(sw))
 		dwords = ARRAY_SIZE(data);
 	else
-		dwords = 7;
+		dwords = 5;
 
 	ret = tb_sw_read(sw, data, TB_CFG_SWITCH, 0, dwords);
 	if (ret)
diff --git a/drivers/thunderbolt/icm.c b/drivers/thunderbolt/icm.c
index baf10d099c77..7859bccc592d 100644
--- a/drivers/thunderbolt/icm.c
+++ b/drivers/thunderbolt/icm.c
@@ -2532,6 +2532,7 @@ struct tb *icm_probe(struct tb_nhi *nhi)
 
 	case PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_2C_NHI:
 	case PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_4C_NHI:
+		icm->can_upgrade_nvm = true;
 		icm->is_supported = icm_tgl_is_supported;
 		icm->get_mode = icm_ar_get_mode;
 		icm->driver_ready = icm_tr_driver_ready;
diff --git a/drivers/thunderbolt/retimer.c b/drivers/thunderbolt/retimer.c
index 6bb49bdcd6c1..6eaaa5074ce8 100644
--- a/drivers/thunderbolt/retimer.c
+++ b/drivers/thunderbolt/retimer.c
@@ -199,8 +199,10 @@ static void tb_retimer_nvm_authenticate_status(struct tb_port *port, u32 *status
 	 * If the retimer has it set, store it for the new retimer
 	 * device instance.
 	 */
-	for (i = 1; i <= TB_MAX_RETIMER_INDEX; i++)
-		usb4_port_retimer_nvm_authenticate_status(port, i, &status[i]);
+	for (i = 1; i <= TB_MAX_RETIMER_INDEX; i++) {
+		if (usb4_port_retimer_nvm_authenticate_status(port, i, &status[i]))
+			break;
+	}
 }
 
 static void tb_retimer_set_inbound_sbtx(struct tb_port *port)
@@ -234,8 +236,10 @@ static void tb_retimer_unset_inbound_sbtx(struct tb_port *port)
 
 	tb_port_dbg(port, "disabling sideband transactions\n");
 
-	for (i = TB_MAX_RETIMER_INDEX; i >= 1; i--)
-		usb4_port_retimer_unset_inbound_sbtx(port, i);
+	for (i = TB_MAX_RETIMER_INDEX; i >= 1; i--) {
+		if (usb4_port_retimer_unset_inbound_sbtx(port, i))
+			break;
+	}
 }
 
 static ssize_t nvm_authenticate_store(struct device *dev,
diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c
index 3e44c78ac409..10e719dd837c 100644
--- a/drivers/thunderbolt/tb.c
+++ b/drivers/thunderbolt/tb.c
@@ -498,8 +498,9 @@ static struct tb_tunnel *tb_find_first_usb3_tunnel(struct tb *tb,
  * @consumed_down: Consumed downstream bandwidth (Mb/s)
  *
  * Calculates consumed USB3 and PCIe bandwidth at @port between path
- * from @src_port to @dst_port. Does not take tunnel starting from
- * @src_port and ending from @src_port into account.
+ * from @src_port to @dst_port. Does not take USB3 tunnel starting from
+ * @src_port and ending on @src_port into account because that bandwidth is
+ * already included in as part of the "first hop" USB3 tunnel.
  */
 static int tb_consumed_usb3_pcie_bandwidth(struct tb *tb,
 					   struct tb_port *src_port,
@@ -514,8 +515,8 @@ static int tb_consumed_usb3_pcie_bandwidth(struct tb *tb,
 	*consumed_up = *consumed_down = 0;
 
 	tunnel = tb_find_first_usb3_tunnel(tb, src_port, dst_port);
-	if (tunnel && tunnel->src_port != src_port &&
-	    tunnel->dst_port != dst_port) {
+	if (tunnel && !tb_port_is_usb3_down(src_port) &&
+	    !tb_port_is_usb3_up(dst_port)) {
 		int ret;
 
 		ret = tb_tunnel_consumed_bandwidth(tunnel, consumed_up,
diff --git a/drivers/thunderbolt/tb_msgs.h b/drivers/thunderbolt/tb_msgs.h
index cd750e4b3440..a1670a96cbdc 100644
--- a/drivers/thunderbolt/tb_msgs.h
+++ b/drivers/thunderbolt/tb_msgs.h
@@ -98,12 +98,6 @@ struct cfg_reset_pkg {
 	struct tb_cfg_header header;
 } __packed;
 
-/* TB_CFG_PKG_PREPARE_TO_SLEEP */
-struct cfg_pts_pkg {
-	struct tb_cfg_header header;
-	u32 data;
-} __packed;
-
 /* ICM messages */
 
 enum icm_pkg_code {
diff --git a/drivers/thunderbolt/trace.h b/drivers/thunderbolt/trace.h
index 4dccfcf7af6a..6d0776514d12 100644
--- a/drivers/thunderbolt/trace.h
+++ b/drivers/thunderbolt/trace.h
@@ -87,23 +87,32 @@ static inline const char *show_data(struct trace_seq *p, u8 type,
 	const char *prefix = "";
 	int i;
 
-	show_route(p, data);
-
 	switch (type) {
 	case TB_CFG_PKG_READ:
 	case TB_CFG_PKG_WRITE:
+		show_route(p, data);
 		show_data_read_write(p, data);
 		break;
 
 	case TB_CFG_PKG_ERROR:
+		show_route(p, data);
 		show_data_error(p, data);
 		break;
 
 	case TB_CFG_PKG_EVENT:
+		show_route(p, data);
 		show_data_event(p, data);
 		break;
 
+	case TB_CFG_PKG_ICM_EVENT:
+	case TB_CFG_PKG_ICM_CMD:
+	case TB_CFG_PKG_ICM_RESP:
+		/* ICM messages always target the host router */
+		trace_seq_puts(p, "route=0, ");
+		break;
+
 	default:
+		show_route(p, data);
 		break;
 	}
 
diff --git a/drivers/thunderbolt/tunnel.c b/drivers/thunderbolt/tunnel.c
index cb6609a56a03..41cf6378ad25 100644
--- a/drivers/thunderbolt/tunnel.c
+++ b/drivers/thunderbolt/tunnel.c
@@ -1435,10 +1435,10 @@ err_free:
  * @in: DP in adapter port
  * @out: DP out adapter port
  * @link_nr: Preferred lane adapter when the link is not bonded
- * @max_up: Maximum available upstream bandwidth for the DP tunnel (%0
- *	    if not limited)
- * @max_down: Maximum available downstream bandwidth for the DP tunnel
- *	      (%0 if not limited)
+ * @max_up: Maximum available upstream bandwidth for the DP tunnel.
+ *	    %0 if no available bandwidth.
+ * @max_down: Maximum available downstream bandwidth for the DP tunnel.
+ *	      %0 if no available bandwidth.
  *
  * Allocates a tunnel between @in and @out that is capable of tunneling
  * Display Port traffic.
@@ -2048,10 +2048,10 @@ err_free:
  * @tb: Pointer to the domain structure
  * @up: USB3 upstream adapter port
  * @down: USB3 downstream adapter port
- * @max_up: Maximum available upstream bandwidth for the USB3 tunnel (%0
- *	    if not limited).
- * @max_down: Maximum available downstream bandwidth for the USB3 tunnel
- *	      (%0 if not limited).
+ * @max_up: Maximum available upstream bandwidth for the USB3 tunnel.
+ *	    %0 if no available bandwidth.
+ * @max_down: Maximum available downstream bandwidth for the USB3 tunnel.
+ *	      %0 if no available bandwidth.
  *
  * Allocate an USB3 tunnel. The ports must be of type @TB_TYPE_USB3_UP and
  * @TB_TYPE_USB3_DOWN.
@@ -2066,24 +2066,19 @@ struct tb_tunnel *tb_tunnel_alloc_usb3(struct tb *tb, struct tb_port *up,
 	struct tb_path *path;
 	int max_rate = 0;
 
-	/*
-	 * Check that we have enough bandwidth available for the new
-	 * USB3 tunnel.
-	 */
-	if (max_up > 0 || max_down > 0) {
+	if (!tb_route(down->sw) && (max_up > 0 || max_down > 0)) {
+		/*
+		 * For USB3 isochronous transfers, we allow bandwidth which is
+		 * not higher than 90% of maximum supported bandwidth by USB3
+		 * adapters.
+		 */
 		max_rate = tb_usb3_max_link_rate(down, up);
 		if (max_rate < 0)
 			return NULL;
 
-		/* Only 90% can be allocated for USB3 isochronous transfers */
 		max_rate = max_rate * 90 / 100;
-		tb_port_dbg(up, "required bandwidth for USB3 tunnel %d Mb/s\n",
+		tb_port_dbg(up, "maximum required bandwidth for USB3 tunnel %d Mb/s\n",
 			    max_rate);
-
-		if (max_rate > max_up || max_rate > max_down) {
-			tb_port_warn(up, "not enough bandwidth for USB3 tunnel\n");
-			return NULL;
-		}
 	}
 
 	tunnel = tb_tunnel_alloc(tb, 2, TB_TUNNEL_USB3);
@@ -2115,8 +2110,8 @@ struct tb_tunnel *tb_tunnel_alloc_usb3(struct tb *tb, struct tb_port *up,
 	tunnel->paths[TB_USB3_PATH_UP] = path;
 
 	if (!tb_route(down->sw)) {
-		tunnel->allocated_up = max_rate;
-		tunnel->allocated_down = max_rate;
+		tunnel->allocated_up = min(max_rate, max_up);
+		tunnel->allocated_down = min(max_rate, max_down);
 
 		tunnel->init = tb_usb3_init;
 		tunnel->consumed_bandwidth = tb_usb3_consumed_bandwidth;
diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c
index 78b06e922fda..de480bf2a53d 100644
--- a/drivers/thunderbolt/usb4.c
+++ b/drivers/thunderbolt/usb4.c
@@ -52,6 +52,10 @@ enum usb4_ba_index {
 #define USB4_BA_VALUE_MASK		GENMASK(31, 16)
 #define USB4_BA_VALUE_SHIFT		16
 
+/* Delays in us used with usb4_port_wait_for_bit() */
+#define USB4_PORT_DELAY			50
+#define USB4_PORT_SB_DELAY		5000
+
 static int usb4_native_switch_op(struct tb_switch *sw, u16 opcode,
 				 u32 *metadata, u8 *status,
 				 const void *tx_data, size_t tx_dwords,
@@ -1245,7 +1249,7 @@ void usb4_port_unconfigure_xdomain(struct tb_port *port)
 }
 
 static int usb4_port_wait_for_bit(struct tb_port *port, u32 offset, u32 bit,
-				  u32 value, int timeout_msec)
+			  u32 value, int timeout_msec, unsigned long delay_usec)
 {
 	ktime_t timeout = ktime_add_ms(ktime_get(), timeout_msec);
 
@@ -1260,7 +1264,7 @@ static int usb4_port_wait_for_bit(struct tb_port *port, u32 offset, u32 bit,
 		if ((val & bit) == value)
 			return 0;
 
-		usleep_range(50, 100);
+		fsleep(delay_usec);
 	} while (ktime_before(ktime_get(), timeout));
 
 	return -ETIMEDOUT;
@@ -1308,7 +1312,7 @@ static int usb4_port_sb_read(struct tb_port *port, enum usb4_sb_target target,
 		return ret;
 
 	ret = usb4_port_wait_for_bit(port, port->cap_usb4 + PORT_CS_1,
-				     PORT_CS_1_PND, 0, 500);
+				     PORT_CS_1_PND, 0, 500, USB4_PORT_SB_DELAY);
 	if (ret)
 		return ret;
 
@@ -1355,7 +1359,7 @@ static int usb4_port_sb_write(struct tb_port *port, enum usb4_sb_target target,
 		return ret;
 
 	ret = usb4_port_wait_for_bit(port, port->cap_usb4 + PORT_CS_1,
-				     PORT_CS_1_PND, 0, 500);
+				     PORT_CS_1_PND, 0, 500, USB4_PORT_SB_DELAY);
 	if (ret)
 		return ret;
 
@@ -1410,6 +1414,8 @@ static int usb4_port_sb_op(struct tb_port *port, enum usb4_sb_target target,
 
 		if (val != opcode)
 			return usb4_port_sb_opcode_err_to_errno(val);
+
+		fsleep(USB4_PORT_SB_DELAY);
 	} while (ktime_before(ktime_get(), timeout));
 
 	return -ETIMEDOUT;
@@ -1591,13 +1597,14 @@ int usb4_port_asym_start(struct tb_port *port)
 	 * port started the symmetry transition.
 	 */
 	ret = usb4_port_wait_for_bit(port, port->cap_usb4 + PORT_CS_19,
-				     PORT_CS_19_START_ASYM, 0, 1000);
+				     PORT_CS_19_START_ASYM, 0, 1000,
+				     USB4_PORT_DELAY);
 	if (ret)
 		return ret;
 
 	/* Then wait for the transtion to be completed */
 	return usb4_port_wait_for_bit(port, port->cap_usb4 + PORT_CS_18,
-				      PORT_CS_18_TIP, 0, 5000);
+				      PORT_CS_18_TIP, 0, 5000, USB4_PORT_DELAY);
 }
 
 /**
@@ -2123,7 +2130,8 @@ static int usb4_usb3_port_cm_request(struct tb_port *port, bool request)
 	 */
 	val &= ADP_USB3_CS_2_CMR;
 	return usb4_port_wait_for_bit(port, port->cap_adap + ADP_USB3_CS_1,
-				      ADP_USB3_CS_1_HCA, val, 1500);
+				      ADP_USB3_CS_1_HCA, val, 1500,
+				      USB4_PORT_DELAY);
 }
 
 static inline int usb4_usb3_port_set_cm_request(struct tb_port *port)
diff --git a/drivers/thunderbolt/xdomain.c b/drivers/thunderbolt/xdomain.c
index 940ae97987ff..11a50c86a1e4 100644
--- a/drivers/thunderbolt/xdomain.c
+++ b/drivers/thunderbolt/xdomain.c
@@ -250,7 +250,7 @@ static int tb_xdp_handle_error(const struct tb_xdp_error_response *res)
 	case ERROR_UNKNOWN_DOMAIN:
 		return -EIO;
 	case ERROR_NOT_SUPPORTED:
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	case ERROR_NOT_READY:
 		return -EAGAIN;
 	default: