serial: group all the 8250 related code together

The drivers/tty/serial dir is already getting rather busy.
Relocate the 8250 related drivers to their own subdir to
reduce the clutter.

Note that sunsu.c is not included in this move -- it is
8250-like hardware, but it does not use any of the existing
infrastructure -- and does not depend on SERIAL_8250.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 105 insertions, 0 deletions

diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
new file mode 100644
index 000000000000..ae027be57e25
--- /dev/null
+++ b/drivers/tty/serial/8250/8250.h
@@ -0,0 +1,105 @@
+/*
+ *  Driver for 8250/16550-type serial ports
+ *
+ *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ *  Copyright (C) 2001 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/serial_8250.h>
+
+struct uart_8250_port {
+	struct uart_port	port;
+	struct timer_list	timer;		/* "no irq" timer */
+	struct list_head	list;		/* ports on this IRQ */
+	unsigned short		capabilities;	/* port capabilities */
+	unsigned short		bugs;		/* port bugs */
+	unsigned int		tx_loadsz;	/* transmit fifo load size */
+	unsigned char		acr;
+	unsigned char		ier;
+	unsigned char		lcr;
+	unsigned char		mcr;
+	unsigned char		mcr_mask;	/* mask of user bits */
+	unsigned char		mcr_force;	/* mask of forced bits */
+	unsigned char		cur_iotype;	/* Running I/O type */
+
+	/*
+	 * Some bits in registers are cleared on a read, so they must
+	 * be saved whenever the register is read but the bits will not
+	 * be immediately processed.
+	 */
+#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS
+	unsigned char		lsr_saved_flags;
+#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
+	unsigned char		msr_saved_flags;
+};
+
+struct old_serial_port {
+	unsigned int uart;
+	unsigned int baud_base;
+	unsigned int port;
+	unsigned int irq;
+	unsigned int flags;
+	unsigned char hub6;
+	unsigned char io_type;
+	unsigned char *iomem_base;
+	unsigned short iomem_reg_shift;
+	unsigned long irqflags;
+};
+
+/*
+ * This replaces serial_uart_config in include/linux/serial.h
+ */
+struct serial8250_config {
+	const char	*name;
+	unsigned short	fifo_size;
+	unsigned short	tx_loadsz;
+	unsigned char	fcr;
+	unsigned int	flags;
+};
+
+#define UART_CAP_FIFO	(1 << 8)	/* UART has FIFO */
+#define UART_CAP_EFR	(1 << 9)	/* UART has EFR */
+#define UART_CAP_SLEEP	(1 << 10)	/* UART has IER sleep */
+#define UART_CAP_AFE	(1 << 11)	/* MCR-based hw flow control */
+#define UART_CAP_UUE	(1 << 12)	/* UART needs IER bit 6 set (Xscale) */
+#define UART_CAP_RTOIE	(1 << 13)	/* UART needs IER bit 4 set (Xscale, Tegra) */
+
+#define UART_BUG_QUOT	(1 << 0)	/* UART has buggy quot LSB */
+#define UART_BUG_TXEN	(1 << 1)	/* UART has buggy TX IIR status */
+#define UART_BUG_NOMSR	(1 << 2)	/* UART has buggy MSR status bits (Au1x00) */
+#define UART_BUG_THRE	(1 << 3)	/* UART has buggy THRE reassertion */
+
+#define PROBE_RSA	(1 << 0)
+#define PROBE_ANY	(~0)
+
+#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
+
+#ifdef CONFIG_SERIAL_8250_SHARE_IRQ
+#define SERIAL8250_SHARE_IRQS 1
+#else
+#define SERIAL8250_SHARE_IRQS 0
+#endif
+
+#if defined(__alpha__) && !defined(CONFIG_PCI)
+/*
+ * Digital did something really horribly wrong with the OUT1 and OUT2
+ * lines on at least some ALPHA's.  The failure mode is that if either
+ * is cleared, the machine locks up with endless interrupts.
+ */
+#define ALPHA_KLUDGE_MCR  (UART_MCR_OUT2 | UART_MCR_OUT1)
+#elif defined(CONFIG_SBC8560)
+/*
+ * WindRiver did something similarly broken on their SBC8560 board. The
+ * UART tristates its IRQ output while OUT2 is clear, but they pulled
+ * the interrupt line _up_ instead of down, so if we register the IRQ
+ * while the UART is in that state, we die in an IRQ storm. */
+#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2)
+#else
+#define ALPHA_KLUDGE_MCR 0
+#endif