diff options
| author | Serge Semin <fancer.lancer@gmail.com> | 2019-05-14 12:14:14 +0200 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2019-05-21 12:15:53 +0200 |
| commit | 2b9e6f0a400b6be1a408cd63ed09cfeb8f5dd627 (patch) | |
| tree | c607b11b8447c31af6bd3c1d58736fde897f4866 /drivers/tty/serial/max310x.c | |
| parent | tty: max310x: Add rx-during-tx rs485 flag support (diff) | |
| download | linux-2b9e6f0a400b6be1a408cd63ed09cfeb8f5dd627.tar.xz linux-2b9e6f0a400b6be1a408cd63ed09cfeb8f5dd627.zip | |
tty: max310x: Optionally enable rs485 on startup
UART port might be pre-configured with rs485 enabled flag at the
time of the port starting up process. In this case we need to
have the hardware rs485-related registers initialized in accordance
with the rs485 flags and settings provided by the configs descriptor.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial/max310x.c')
| -rw-r--r-- | drivers/tty/serial/max310x.c | 16 |
1 files changed, 16 insertions, 0 deletions
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 2255300404bd..36943f6c198c 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1030,6 +1030,22 @@ static int max310x_startup(struct uart_port *port) max310x_port_update(port, MAX310X_MODE2_REG, MAX310X_MODE2_FIFORST_BIT, 0); + /* Configure mode1/mode2 to have rs485/rs232 enabled at startup */ + val = (clamp(port->rs485.delay_rts_before_send, 0U, 15U) << 4) | + clamp(port->rs485.delay_rts_after_send, 0U, 15U); + max310x_port_write(port, MAX310X_HDPIXDELAY_REG, val); + + if (port->rs485.flags & SER_RS485_ENABLED) { + max310x_port_update(port, MAX310X_MODE1_REG, + MAX310X_MODE1_TRNSCVCTRL_BIT, + MAX310X_MODE1_TRNSCVCTRL_BIT); + + if (!(port->rs485.flags & SER_RS485_RX_DURING_TX)) + max310x_port_update(port, MAX310X_MODE2_REG, + MAX310X_MODE2_ECHOSUPR_BIT, + MAX310X_MODE2_ECHOSUPR_BIT); + } + /* Configure flow control levels */ /* Flow control halt level 96, resume level 48 */ max310x_port_write(port, MAX310X_FLOWLVL_REG, |