tty: move drivers/serial/ to drivers/tty/serial/

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 633 insertions, 0 deletions

diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c
new file mode 100644
index 000000000000..9711e06a8374
--- /dev/null
+++ b/drivers/tty/serial/mux.c
@@ -0,0 +1,633 @@
+/*
+** mux.c:
+**	serial driver for the Mux console found in some PA-RISC servers.
+**
+**	(c) Copyright 2002 Ryan Bradetich
+**	(c) Copyright 2002 Hewlett-Packard Company
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License as published by
+** the Free Software Foundation; either version 2 of the License, or
+** (at your option) any later version.
+**
+** This Driver currently only supports the console (port 0) on the MUX.
+** Additional work will be needed on this driver to enable the full
+** functionality of the MUX.
+**
+*/
+
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/delay.h> /* for udelay */
+#include <linux/device.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/parisc-device.h>
+
+#ifdef CONFIG_MAGIC_SYSRQ
+#include <linux/sysrq.h>
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+
+#define MUX_OFFSET 0x800
+#define MUX_LINE_OFFSET 0x80
+
+#define MUX_FIFO_SIZE 255
+#define MUX_POLL_DELAY (30 * HZ / 1000)
+
+#define IO_DATA_REG_OFFSET 0x3c
+#define IO_DCOUNT_REG_OFFSET 0x40
+
+#define MUX_EOFIFO(status) ((status & 0xF000) == 0xF000)
+#define MUX_STATUS(status) ((status & 0xF000) == 0x8000)
+#define MUX_BREAK(status) ((status & 0xF000) == 0x2000)
+
+#define MUX_NR 256
+static unsigned int port_cnt __read_mostly;
+struct mux_port {
+	struct uart_port port;
+	int enabled;
+};
+static struct mux_port mux_ports[MUX_NR];
+
+static struct uart_driver mux_driver = {
+	.owner = THIS_MODULE,
+	.driver_name = "ttyB",
+	.dev_name = "ttyB",
+	.major = MUX_MAJOR,
+	.minor = 0,
+	.nr = MUX_NR,
+};
+
+static struct timer_list mux_timer;
+
+#define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + IO_DATA_REG_OFFSET)
+#define UART_GET_FIFO_CNT(p) __raw_readl((p)->membase + IO_DCOUNT_REG_OFFSET)
+
+/**
+ * get_mux_port_count - Get the number of available ports on the Mux.
+ * @dev: The parisc device.
+ *
+ * This function is used to determine the number of ports the Mux
+ * supports.  The IODC data reports the number of ports the Mux
+ * can support, but there are cases where not all the Mux ports
+ * are connected.  This function can override the IODC and
+ * return the true port count.
+ */
+static int __init get_mux_port_count(struct parisc_device *dev)
+{
+	int status;
+	u8 iodc_data[32];
+	unsigned long bytecnt;
+
+	/* If this is the built-in Mux for the K-Class (Eole CAP/MUX),
+	 * we only need to allocate resources for 1 port since the
+	 * other 7 ports are not connected.
+	 */
+	if(dev->id.hversion == 0x15)
+		return 1;
+
+	status = pdc_iodc_read(&bytecnt, dev->hpa.start, 0, iodc_data, 32);
+	BUG_ON(status != PDC_OK);
+
+	/* Return the number of ports specified in the iodc data. */
+	return ((((iodc_data)[4] & 0xf0) >> 4) * 8) + 8;
+}
+
+/**
+ * mux_tx_empty - Check if the transmitter fifo is empty.
+ * @port: Ptr to the uart_port.
+ *
+ * This function test if the transmitter fifo for the port
+ * described by 'port' is empty.  If it is empty, this function
+ * should return TIOCSER_TEMT, otherwise return 0.
+ */
+static unsigned int mux_tx_empty(struct uart_port *port)
+{
+	return UART_GET_FIFO_CNT(port) ? 0 : TIOCSER_TEMT;
+} 
+
+/**
+ * mux_set_mctrl - Set the current state of the modem control inputs.
+ * @ports: Ptr to the uart_port.
+ * @mctrl: Modem control bits.
+ *
+ * The Serial MUX does not support CTS, DCD or DSR so this function
+ * is ignored.
+ */
+static void mux_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+/**
+ * mux_get_mctrl - Returns the current state of modem control inputs.
+ * @port: Ptr to the uart_port.
+ *
+ * The Serial MUX does not support CTS, DCD or DSR so these lines are
+ * treated as permanently active.
+ */
+static unsigned int mux_get_mctrl(struct uart_port *port)
+{ 
+	return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+}
+
+/**
+ * mux_stop_tx - Stop transmitting characters.
+ * @port: Ptr to the uart_port.
+ *
+ * The Serial MUX does not support this function.
+ */
+static void mux_stop_tx(struct uart_port *port)
+{
+}
+
+/**
+ * mux_start_tx - Start transmitting characters.
+ * @port: Ptr to the uart_port.
+ *
+ * The Serial Mux does not support this function.
+ */
+static void mux_start_tx(struct uart_port *port)
+{
+}
+
+/**
+ * mux_stop_rx - Stop receiving characters.
+ * @port: Ptr to the uart_port.
+ *
+ * The Serial Mux does not support this function.
+ */
+static void mux_stop_rx(struct uart_port *port)
+{
+}
+
+/**
+ * mux_enable_ms - Enable modum status interrupts.
+ * @port: Ptr to the uart_port.
+ *
+ * The Serial Mux does not support this function.
+ */
+static void mux_enable_ms(struct uart_port *port)
+{
+}
+
+/**
+ * mux_break_ctl - Control the transmitssion of a break signal.
+ * @port: Ptr to the uart_port.
+ * @break_state: Raise/Lower the break signal.
+ *
+ * The Serial Mux does not support this function.
+ */
+static void mux_break_ctl(struct uart_port *port, int break_state)
+{
+}
+
+/**
+ * mux_write - Write chars to the mux fifo.
+ * @port: Ptr to the uart_port.
+ *
+ * This function writes all the data from the uart buffer to
+ * the mux fifo.
+ */
+static void mux_write(struct uart_port *port)
+{
+	int count;
+	struct circ_buf *xmit = &port->state->xmit;
+
+	if(port->x_char) {
+		UART_PUT_CHAR(port, port->x_char);
+		port->icount.tx++;
+		port->x_char = 0;
+		return;
+	}
+
+	if(uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+		mux_stop_tx(port);
+		return;
+	}
+
+	count = (port->fifosize) - UART_GET_FIFO_CNT(port);
+	do {
+		UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+		if(uart_circ_empty(xmit))
+			break;
+
+	} while(--count > 0);
+
+	while(UART_GET_FIFO_CNT(port)) 
+		udelay(1);
+
+	if(uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_empty(xmit))
+		mux_stop_tx(port);
+}
+
+/**
+ * mux_read - Read chars from the mux fifo.
+ * @port: Ptr to the uart_port.
+ *
+ * This reads all available data from the mux's fifo and pushes
+ * the data to the tty layer.
+ */
+static void mux_read(struct uart_port *port)
+{
+	int data;
+	struct tty_struct *tty = port->state->port.tty;
+	__u32 start_count = port->icount.rx;
+
+	while(1) {
+		data = __raw_readl(port->membase + IO_DATA_REG_OFFSET);
+
+		if (MUX_STATUS(data))
+			continue;
+
+		if (MUX_EOFIFO(data))
+			break;
+
+		port->icount.rx++;
+
+		if (MUX_BREAK(data)) {
+			port->icount.brk++;
+			if(uart_handle_break(port))
+				continue;
+		}
+
+		if (uart_handle_sysrq_char(port, data & 0xffu))
+			continue;
+
+		tty_insert_flip_char(tty, data & 0xFF, TTY_NORMAL);
+	}
+	
+	if (start_count != port->icount.rx) {
+		tty_flip_buffer_push(tty);
+	}
+}
+
+/**
+ * mux_startup - Initialize the port.
+ * @port: Ptr to the uart_port.
+ *
+ * Grab any resources needed for this port and start the
+ * mux timer.
+ */
+static int mux_startup(struct uart_port *port)
+{
+	mux_ports[port->line].enabled = 1;
+	return 0;
+}
+
+/**
+ * mux_shutdown - Disable the port.
+ * @port: Ptr to the uart_port.
+ *
+ * Release any resources needed for the port.
+ */
+static void mux_shutdown(struct uart_port *port)
+{
+	mux_ports[port->line].enabled = 0;
+}
+
+/**
+ * mux_set_termios - Chane port parameters.
+ * @port: Ptr to the uart_port.
+ * @termios: new termios settings.
+ * @old: old termios settings.
+ *
+ * The Serial Mux does not support this function.
+ */
+static void
+mux_set_termios(struct uart_port *port, struct ktermios *termios,
+	        struct ktermios *old)
+{
+}
+
+/**
+ * mux_type - Describe the port.
+ * @port: Ptr to the uart_port.
+ *
+ * Return a pointer to a string constant describing the
+ * specified port.
+ */
+static const char *mux_type(struct uart_port *port)
+{
+	return "Mux";
+}
+
+/**
+ * mux_release_port - Release memory and IO regions.
+ * @port: Ptr to the uart_port.
+ * 
+ * Release any memory and IO region resources currently in use by
+ * the port.
+ */
+static void mux_release_port(struct uart_port *port)
+{
+}
+
+/**
+ * mux_request_port - Request memory and IO regions.
+ * @port: Ptr to the uart_port.
+ *
+ * Request any memory and IO region resources required by the port.
+ * If any fail, no resources should be registered when this function
+ * returns, and it should return -EBUSY on failure.
+ */
+static int mux_request_port(struct uart_port *port)
+{
+	return 0;
+}
+
+/**
+ * mux_config_port - Perform port autoconfiguration.
+ * @port: Ptr to the uart_port.
+ * @type: Bitmask of required configurations.
+ *
+ * Perform any autoconfiguration steps for the port.  This function is
+ * called if the UPF_BOOT_AUTOCONF flag is specified for the port.
+ * [Note: This is required for now because of a bug in the Serial core.
+ *  rmk has already submitted a patch to linus, should be available for
+ *  2.5.47.]
+ */
+static void mux_config_port(struct uart_port *port, int type)
+{
+	port->type = PORT_MUX;
+}
+
+/**
+ * mux_verify_port - Verify the port information.
+ * @port: Ptr to the uart_port.
+ * @ser: Ptr to the serial information.
+ *
+ * Verify the new serial port information contained within serinfo is
+ * suitable for this port type.
+ */
+static int mux_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+	if(port->membase == NULL)
+		return -EINVAL;
+
+	return 0;
+}
+
+/**
+ * mux_drv_poll - Mux poll function.
+ * @unused: Unused variable
+ *
+ * This function periodically polls the Serial MUX to check for new data.
+ */
+static void mux_poll(unsigned long unused)
+{  
+	int i;
+
+	for(i = 0; i < port_cnt; ++i) {
+		if(!mux_ports[i].enabled)
+			continue;
+
+		mux_read(&mux_ports[i].port);
+		mux_write(&mux_ports[i].port);
+	}
+
+	mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY);
+}
+
+
+#ifdef CONFIG_SERIAL_MUX_CONSOLE
+static void mux_console_write(struct console *co, const char *s, unsigned count)
+{
+	/* Wait until the FIFO drains. */
+	while(UART_GET_FIFO_CNT(&mux_ports[0].port))
+		udelay(1);
+
+	while(count--) {
+		if(*s == '\n') {
+			UART_PUT_CHAR(&mux_ports[0].port, '\r');
+		}
+		UART_PUT_CHAR(&mux_ports[0].port, *s++);
+	}
+
+}
+
+static int mux_console_setup(struct console *co, char *options)
+{
+        return 0;
+}
+
+struct tty_driver *mux_console_device(struct console *co, int *index)
+{
+        *index = co->index;
+	return mux_driver.tty_driver;
+}
+
+static struct console mux_console = {
+	.name =		"ttyB",
+	.write =	mux_console_write,
+	.device =	mux_console_device,
+	.setup =	mux_console_setup,
+	.flags =	CON_ENABLED | CON_PRINTBUFFER,
+	.index =	0,
+};
+
+#define MUX_CONSOLE	&mux_console
+#else
+#define MUX_CONSOLE	NULL
+#endif
+
+static struct uart_ops mux_pops = {
+	.tx_empty =		mux_tx_empty,
+	.set_mctrl =		mux_set_mctrl,
+	.get_mctrl =		mux_get_mctrl,
+	.stop_tx =		mux_stop_tx,
+	.start_tx =		mux_start_tx,
+	.stop_rx =		mux_stop_rx,
+	.enable_ms =		mux_enable_ms,
+	.break_ctl =		mux_break_ctl,
+	.startup =		mux_startup,
+	.shutdown =		mux_shutdown,
+	.set_termios =		mux_set_termios,
+	.type =			mux_type,
+	.release_port =		mux_release_port,
+	.request_port =		mux_request_port,
+	.config_port =		mux_config_port,
+	.verify_port =		mux_verify_port,
+};
+
+/**
+ * mux_probe - Determine if the Serial Mux should claim this device.
+ * @dev: The parisc device.
+ *
+ * Deterimine if the Serial Mux should claim this chip (return 0)
+ * or not (return 1).
+ */
+static int __init mux_probe(struct parisc_device *dev)
+{
+	int i, status;
+
+	int port_count = get_mux_port_count(dev);
+	printk(KERN_INFO "Serial mux driver (%d ports) Revision: 0.6\n", port_count);
+
+	dev_set_drvdata(&dev->dev, (void *)(long)port_count);
+	request_mem_region(dev->hpa.start + MUX_OFFSET,
+                           port_count * MUX_LINE_OFFSET, "Mux");
+
+	if(!port_cnt) {
+		mux_driver.cons = MUX_CONSOLE;
+
+		status = uart_register_driver(&mux_driver);
+		if(status) {
+			printk(KERN_ERR "Serial mux: Unable to register driver.\n");
+			return 1;
+		}
+	}
+
+	for(i = 0; i < port_count; ++i, ++port_cnt) {
+		struct uart_port *port = &mux_ports[port_cnt].port;
+		port->iobase	= 0;
+		port->mapbase	= dev->hpa.start + MUX_OFFSET +
+						(i * MUX_LINE_OFFSET);
+		port->membase	= ioremap_nocache(port->mapbase, MUX_LINE_OFFSET);
+		port->iotype	= UPIO_MEM;
+		port->type	= PORT_MUX;
+		port->irq	= NO_IRQ;
+		port->uartclk	= 0;
+		port->fifosize	= MUX_FIFO_SIZE;
+		port->ops	= &mux_pops;
+		port->flags	= UPF_BOOT_AUTOCONF;
+		port->line	= port_cnt;
+
+		/* The port->timeout needs to match what is present in
+		 * uart_wait_until_sent in serial_core.c.  Otherwise
+		 * the time spent in msleep_interruptable will be very
+		 * long, causing the appearance of a console hang.
+		 */
+		port->timeout   = HZ / 50;
+		spin_lock_init(&port->lock);
+
+		status = uart_add_one_port(&mux_driver, port);
+		BUG_ON(status);
+	}
+
+	return 0;
+}
+
+static int __devexit mux_remove(struct parisc_device *dev)
+{
+	int i, j;
+	int port_count = (long)dev_get_drvdata(&dev->dev);
+
+	/* Find Port 0 for this card in the mux_ports list. */
+	for(i = 0; i < port_cnt; ++i) {
+		if(mux_ports[i].port.mapbase == dev->hpa.start + MUX_OFFSET)
+			break;
+	}
+	BUG_ON(i + port_count > port_cnt);
+
+	/* Release the resources associated with each port on the device. */
+	for(j = 0; j < port_count; ++j, ++i) {
+		struct uart_port *port = &mux_ports[i].port;
+
+		uart_remove_one_port(&mux_driver, port);
+		if(port->membase)
+			iounmap(port->membase);
+	}
+
+	release_mem_region(dev->hpa.start + MUX_OFFSET, port_count * MUX_LINE_OFFSET);
+	return 0;
+}
+
+/* Hack.  This idea was taken from the 8250_gsc.c on how to properly order
+ * the serial port detection in the proper order.   The idea is we always
+ * want the builtin mux to be detected before addin mux cards, so we
+ * specifically probe for the builtin mux cards first.
+ *
+ * This table only contains the parisc_device_id of known builtin mux
+ * devices.  All other mux cards will be detected by the generic mux_tbl.
+ */
+static struct parisc_device_id builtin_mux_tbl[] = {
+	{ HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x15, 0x0000D }, /* All K-class */
+	{ HPHW_A_DIRECT, HVERSION_REV_ANY_ID, 0x44, 0x0000D }, /* E35, E45, and E55 */
+	{ 0, }
+};
+
+static struct parisc_device_id mux_tbl[] = {
+	{ HPHW_A_DIRECT, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0000D },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(parisc, builtin_mux_tbl);
+MODULE_DEVICE_TABLE(parisc, mux_tbl);
+
+static struct parisc_driver builtin_serial_mux_driver = {
+	.name =		"builtin_serial_mux",
+	.id_table =	builtin_mux_tbl,
+	.probe =	mux_probe,
+	.remove =       __devexit_p(mux_remove),
+};
+
+static struct parisc_driver serial_mux_driver = {
+	.name =		"serial_mux",
+	.id_table =	mux_tbl,
+	.probe =	mux_probe,
+	.remove =       __devexit_p(mux_remove),
+};
+
+/**
+ * mux_init - Serial MUX initialization procedure.
+ *
+ * Register the Serial MUX driver.
+ */
+static int __init mux_init(void)
+{
+	register_parisc_driver(&builtin_serial_mux_driver);
+	register_parisc_driver(&serial_mux_driver);
+
+	if(port_cnt > 0) {
+		/* Start the Mux timer */
+		init_timer(&mux_timer);
+		mux_timer.function = mux_poll;
+		mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY);
+
+#ifdef CONFIG_SERIAL_MUX_CONSOLE
+	        register_console(&mux_console);
+#endif
+	}
+
+	return 0;
+}
+
+/**
+ * mux_exit - Serial MUX cleanup procedure.
+ *
+ * Unregister the Serial MUX driver from the tty layer.
+ */
+static void __exit mux_exit(void)
+{
+	/* Delete the Mux timer. */
+	if(port_cnt > 0) {
+		del_timer(&mux_timer);
+#ifdef CONFIG_SERIAL_MUX_CONSOLE
+		unregister_console(&mux_console);
+#endif
+	}
+
+	unregister_parisc_driver(&builtin_serial_mux_driver);
+	unregister_parisc_driver(&serial_mux_driver);
+	uart_unregister_driver(&mux_driver);
+}
+
+module_init(mux_init);
+module_exit(mux_exit);
+
+MODULE_AUTHOR("Ryan Bradetich");
+MODULE_DESCRIPTION("Serial MUX driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CHARDEV_MAJOR(MUX_MAJOR);