diff options
author | Stephen Chivers <schivers@csc.com> | 2014-05-14 00:04:39 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2014-05-28 22:07:27 +0200 |
commit | 7fa21dd8bd191564a195291161d6b43db5d9c350 (patch) | |
tree | fa2e01328a932ad906f3bb6f704973dda716c9ea /drivers/tty/serial/of_serial.c | |
parent | serial: 8250_dma: check the result of TX buffer mapping (diff) | |
download | linux-7fa21dd8bd191564a195291161d6b43db5d9c350.tar.xz linux-7fa21dd8bd191564a195291161d6b43db5d9c350.zip |
printk/of_serial: fix serial console cessation part way through boot.
Commit 5f5c9ae56c38942623f69c3e6dc6ec78e4da2076
"serial_core: Unregister console in uart_remove_one_port()"
fixed a crash where a serial port was removed but
not deregistered as a console.
There is a side effect of that commit for platforms having serial consoles
and of_serial configured (CONFIG_SERIAL_OF_PLATFORM). The serial console
is disabled midway through the boot process.
This cessation of the serial console affects PowerPC computers
such as the MVME5100 and SAM440EP.
The sequence is:
bootconsole [udbg0] enabled
....
serial8250/16550 driver initialises and registers its UARTS,
one of these is the serial console.
console [ttyS0] enabled
....
of_serial probes "platform" devices, registering them as it goes.
One of these is the serial console.
console [ttyS0] disabled.
The disabling of the serial console is due to:
a. unregister_console in printk not clearing the
CONS_ENABLED bit in the console flags,
even though it has announced that the console is disabled; and
b. of_platform_serial_probe in of_serial not setting the port type
before it registers with serial8250_register_8250_port.
This patch ensures that the serial console is re-enabled when of_serial
registers a serial port that corresponds to the designated console.
Signed-off-by: Stephen Chivers <schivers@csc.com>
Tested-by: Stephen Chivers <schivers@csc.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [unregister_console]
Cc: stable <stable@vger.kernel.org> # 3.15
===
The above failure was identified in Linux-3.15-rc2.
Tested using MVME5100 and SAM440EP PowerPC computers with
kernels built from Linux-3.15-rc5 and tty-next.
The continued operation of the serial console is vital for computers
such as the MVME5100 as that Single Board Computer does not
have any grapical/display hardware.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial/of_serial.c')
-rw-r--r-- | drivers/tty/serial/of_serial.c | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index 77ec6a147522..68d4455f3cf9 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -173,6 +173,7 @@ static int of_platform_serial_probe(struct platform_device *ofdev) { struct uart_8250_port port8250; memset(&port8250, 0, sizeof(port8250)); + port.type = port_type; port8250.port = port; if (port.fifosize) |