Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.7.  Here's the summary of
  the changes:

   - ATH79: Support for DTB passuing using the UHI boot protocol
   - ATH79: Remove support for builtin DTB.
   - ATH79: Add zboot debug serial support.
   - ATH79: Add initial support for Dragino MS14 (Dragine 2), Onion Omega
            and DPT-Module.
   - ATH79: Update devicetree clock support for AR9132 and AR9331.
   - ATH79: Cleanup the DT code.
   - ATH79: Support newer SOCs in ath79_ddr_ctrl_init.
   - ATH79: Fix regression in PCI window initialization.
   - BCM47xx: Move SPROM driver to drivers/firmware/
   - BCM63xx: Enable partition parser in defconfig.
   - BMIPS: BMIPS5000 has I cache filing from D cache
   - BMIPS: BMIPS: Add cpu-feature-overrides.h
   - BMIPS: Add Whirlwind support
   - BMIPS: Adjust mips-hpt-frequency for BCM7435
   - BMIPS: Remove maxcpus from BCM97435SVMB DTS
   - BMIPS: Add missing 7038 L1 register cells to BCM7435
   - BMIPS: Various tweaks to initialization code.
   - BMIPS: Enable partition parser in defconfig.
   - BMIPS: Cache tweaks.
   - BMIPS: Add UART, I2C and SATA devices to DT.
   - BMIPS: Add BCM6358 and BCM63268support
   - BMIPS: Add device tree example for BCM6358.
   - BMIPS: Improve Improve BCM6328 and BCM6368 device trees
   - Lantiq: Add support for device tree file from boot loader
   - Lantiq: Allow build with no built-in DT.
   - Loongson 3: Reserve 32MB for RS780E integrated GPU.
   - Loongson 3: Fix build error after ld-version.sh modification
   - Loongson 3: Move chipset ACPI code from drivers to arch.
   - Loongson 3: Speedup irq processing.
   - Loongson 3: Add basic Loongson 3A support.
   - Loongson 3: Set cache flush handlers to nop.
   - Loongson 3: Invalidate special TLBs when needed.
   - Loongson 3: Fast TLB refill handler.
   - MT7620: Fallback strategy for invalid syscfg0.
   - Netlogic: Fix CP0_EBASE redefinition warnings
   - Octeon: Initialization fixes
   - Octeon: Add DTS files for the D-Link DSR-1000N and EdgeRouter Lite
   - Octeon: Enable add Octeon-drivers in cavium_octeon_defconfig
   - Octeon: Correctly handle endian-swapped initramfs images.
   - Octeon: Support CN73xx, CN75xx and CN78xx.
   - Octeon: Remove dead code from cvmx-sysinfo.
   - Octeon: Extend number of supported CPUs past 32.
   - Octeon: Remove some code limiting NR_IRQS to 255.
   - Octeon: Simplify octeon_irq_ciu_gpio_set_type.
   - Octeon: Mark some functions __init in smp.c
   - Octeon: Octeon: Add Octeon III CN7xxx interface detection
   - PIC32: Add serial driver and bindings for it.
   - PIC32: Add PIC32 deadman timer driver and bindings.
   - PIC32: Add PIC32 clock timer driver and bindings.
   - Pistachio: Determine SoC revision during boot
   - Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER.
   - Sibyte: Strip redundant comments from bcm1480_regs.h.
   - Panic immediately if panic_on_oops is set.
   - module: fix incorrect IS_ERR_VALUE macro usage.
   - module: Make consistent use of pr_*
   - Remove no longer needed work_on_cpu() call.
   - Remove CONFIG_IPV6_PRIVACY from defconfigs.
   - Fix registers of non-crashing CPUs in dumps.
   - Handle MIPSisms in new vmcore_elf32_check_arch.
   - Select CONFIG_HANDLE_DOMAIN_IRQ and make it work.
   - Allow RIXI to be used on non-R2 or R6 cores.
   - Reserve nosave data for hibernation
   - Fix siginfo.h to use strict POSIX types.
   - Don't unwind user mode with EVA.
   - Fix watchpoint restoration
   - Ptrace watchpoints for R6.
   - Sync icache when it fills from dcache
   - I6400 I-cache fills from dcache.
   - Various MSA fixes.
   - Cleanup MIPS_CPU_* definitions.
   - Signal: Move generic copy_siginfo to signal.h
   - Signal: Fix uapi include in exported asm/siginfo.h
   - Timer fixes for sake of KVM.
   - XPA TLB refill fixes.
   - Treat perf counter feature
   - Update John Crispin's email address
   - Add PIC32 watchdog and bindings.
   - Handle R10000 LL/SC bug in set_pte()
   - cpufreq: Various fixes for Longson1.
   - R6: Fix R2 emulation.
   - mathemu: Cosmetic fix to ADDIUPC emulation, plenty of other small fixes
   - ELF: ABI and FP fixes.
   - Allow for relocatable kernel and use that to support KASLR.
   - Fix CPC_BASE_ADDR mask
   - Plenty fo smp-cps, CM, R6 and M6250 fixes.
   - Make reset_control_ops const.
   - Fix kernel command line handling of leading whitespace.
   - Cleanups to cache handling.
   - Add brcm, bcm6345-l1-intc device tree bindings.
   - Use generic clkdev.h header
   - Remove CLK_IS_ROOT usage.
   - Misc small cleanups.
   - CM: Fix compilation error when !MIPS_CM
   - oprofile: Fix a preemption issue
   - Detect DSP ASE v3 support:1"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (275 commits)
  MIPS: pic32mzda: fix getting timer clock rate.
  MIPS: ath79: fix regression in PCI window initialization
  MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCs
  MIPS: Fix VZ probe gas errors with binutils <2.24
  MIPS: perf: Fix I6400 event numbers
  MIPS: DEC: Export `ioasic_ssr_lock' to modules
  MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC
  MIPS: CM: Fix compilation error when !MIPS_CM
  MIPS: Fix genvdso error on rebuild
  USB: ohci-jz4740: Remove obsolete driver
  MIPS: JZ4740: Probe OHCI platform device via DT
  MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant
  MIPS: pistachio: Determine SoC revision during boot
  MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435
  mips: mt7620: fallback to SDRAM when syscfg0 does not have a valid value for the memory type
  MIPS: Prevent "restoration" of MSA context in non-MSA kernels
  MIPS: cevt-r4k: Dynamically calculate min_delta_ns
  MIPS: malta-time: Take seconds into account
  MIPS: malta-time: Start GIC count before syncing to RTC
  MIPS: Force CPUs to lose FP context during mode switches
  ...

1 files changed, 126 insertions, 0 deletions

diff --git a/drivers/tty/serial/pic32_uart.h b/drivers/tty/serial/pic32_uart.h
new file mode 100644
index 000000000000..ec379da55ebb
--- /dev/null
+++ b/drivers/tty/serial/pic32_uart.h
@@ -0,0 +1,126 @@
+/*
+ * PIC32 Integrated Serial Driver.
+ *
+ * Copyright (C) 2015 Microchip Technology, Inc.
+ *
+ * Authors:
+ *   Sorin-Andrei Pistirica <andrei.pistirica@microchip.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#ifndef __DT_PIC32_UART_H__
+#define __DT_PIC32_UART_H__
+
+#define PIC32_UART_DFLT_BRATE		(9600)
+#define PIC32_UART_TX_FIFO_DEPTH	(8)
+#define PIC32_UART_RX_FIFO_DEPTH	(8)
+
+#define PIC32_UART_MODE		0x00
+#define PIC32_UART_STA		0x10
+#define PIC32_UART_TX		0x20
+#define PIC32_UART_RX		0x30
+#define PIC32_UART_BRG		0x40
+
+struct pic32_console_opt {
+	int baud;
+	int parity;
+	int bits;
+	int flow;
+};
+
+/* struct pic32_sport - pic32 serial port descriptor
+ * @port: uart port descriptor
+ * @idx: port index
+ * @irq_fault: virtual fault interrupt number
+ * @irqflags_fault: flags related to fault irq
+ * @irq_fault_name: irq fault name
+ * @irq_rx: virtual rx interrupt number
+ * @irqflags_rx: flags related to rx irq
+ * @irq_rx_name: irq rx name
+ * @irq_tx: virtual tx interrupt number
+ * @irqflags_tx: : flags related to tx irq
+ * @irq_tx_name: irq tx name
+ * @cts_gpio: clear to send gpio
+ * @dev: device descriptor
+ **/
+struct pic32_sport {
+	struct uart_port port;
+	struct pic32_console_opt opt;
+	int idx;
+
+	int irq_fault;
+	int irqflags_fault;
+	const char *irq_fault_name;
+	int irq_rx;
+	int irqflags_rx;
+	const char *irq_rx_name;
+	int irq_tx;
+	int irqflags_tx;
+	const char *irq_tx_name;
+	u8 enable_tx_irq;
+
+	bool hw_flow_ctrl;
+	int cts_gpio;
+
+	int ref_clk;
+	struct clk *clk;
+
+	struct device *dev;
+};
+#define to_pic32_sport(c) container_of(c, struct pic32_sport, port)
+#define pic32_get_port(sport) (&sport->port)
+#define pic32_get_opt(sport) (&sport->opt)
+#define tx_irq_enabled(sport) (sport->enable_tx_irq)
+
+static inline void pic32_uart_writel(struct pic32_sport *sport,
+					u32 reg, u32 val)
+{
+	struct uart_port *port = pic32_get_port(sport);
+
+	__raw_writel(val, port->membase + reg);
+}
+
+static inline u32 pic32_uart_readl(struct pic32_sport *sport, u32 reg)
+{
+	struct uart_port *port = pic32_get_port(sport);
+
+	return	__raw_readl(port->membase + reg);
+}
+
+/* pic32 uart mode register bits */
+#define PIC32_UART_MODE_ON        BIT(15)
+#define PIC32_UART_MODE_FRZ       BIT(14)
+#define PIC32_UART_MODE_SIDL      BIT(13)
+#define PIC32_UART_MODE_IREN      BIT(12)
+#define PIC32_UART_MODE_RTSMD     BIT(11)
+#define PIC32_UART_MODE_RESV1     BIT(10)
+#define PIC32_UART_MODE_UEN1      BIT(9)
+#define PIC32_UART_MODE_UEN0      BIT(8)
+#define PIC32_UART_MODE_WAKE      BIT(7)
+#define PIC32_UART_MODE_LPBK      BIT(6)
+#define PIC32_UART_MODE_ABAUD     BIT(5)
+#define PIC32_UART_MODE_RXINV     BIT(4)
+#define PIC32_UART_MODE_BRGH      BIT(3)
+#define PIC32_UART_MODE_PDSEL1    BIT(2)
+#define PIC32_UART_MODE_PDSEL0    BIT(1)
+#define PIC32_UART_MODE_STSEL     BIT(0)
+
+/* pic32 uart status register bits */
+#define PIC32_UART_STA_UTXISEL1   BIT(15)
+#define PIC32_UART_STA_UTXISEL0   BIT(14)
+#define PIC32_UART_STA_UTXINV     BIT(13)
+#define PIC32_UART_STA_URXEN      BIT(12)
+#define PIC32_UART_STA_UTXBRK     BIT(11)
+#define PIC32_UART_STA_UTXEN      BIT(10)
+#define PIC32_UART_STA_UTXBF      BIT(9)
+#define PIC32_UART_STA_TRMT       BIT(8)
+#define PIC32_UART_STA_URXISEL1   BIT(7)
+#define PIC32_UART_STA_URXISEL0   BIT(6)
+#define PIC32_UART_STA_ADDEN      BIT(5)
+#define PIC32_UART_STA_RIDLE      BIT(4)
+#define PIC32_UART_STA_PERR       BIT(3)
+#define PIC32_UART_STA_FERR       BIT(2)
+#define PIC32_UART_STA_OERR       BIT(1)
+#define PIC32_UART_STA_URXDA      BIT(0)
+
+#endif /* __DT_PIC32_UART_H__ */