summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-03-17 03:05:40 +0100
committerLinus Torvalds <torvalds@linux-foundation.org>2011-03-17 03:05:40 +0100
commit63a93699c6a58795b854ff573542a08367684dae (patch)
tree057ab4cbde66862c51867dde030be69a2fa7073f /drivers/tty/serial
parentMerge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm (diff)
parentARM: 6629/2: aaec2000: remove support for mach-aaec2000 (diff)
downloadlinux-63a93699c6a58795b854ff573542a08367684dae.tar.xz
linux-63a93699c6a58795b854ff573542a08367684dae.zip
Merge branch 'remove' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'remove' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6629/2: aaec2000: remove support for mach-aaec2000 ARM: lh7a40x: remove unmaintained platform support Fix up trivial conflicts in - arch/arm/mach-{aaec2000,lh7a40x}/include/mach/memory.h (removed) - drivers/usb/gadget/Kconfig (USB_[GADGET_]LH7A40X removed, others added)
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r--drivers/tty/serial/Kconfig23
-rw-r--r--drivers/tty/serial/Makefile1
-rw-r--r--drivers/tty/serial/serial_lh7a40x.c682
3 files changed, 0 insertions, 706 deletions
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index d9ccbf825095..e461be164f67 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1110,29 +1110,6 @@ config SERIAL_PMACZILOG_CONSOLE
on your (Power)Mac as the console, you can do so by answering
Y to this option.
-config SERIAL_LH7A40X
- tristate "Sharp LH7A40X embedded UART support"
- depends on ARM && ARCH_LH7A40X
- select SERIAL_CORE
- help
- This enables support for the three on-board UARTs of the
- Sharp LH7A40X series CPUs. Choose Y or M.
-
-config SERIAL_LH7A40X_CONSOLE
- bool "Support for console on Sharp LH7A40X serial port"
- depends on SERIAL_LH7A40X=y
- select SERIAL_CORE_CONSOLE
- help
- Say Y here if you wish to use one of the serial ports as the
- system console--the system console is the device which
- receives all kernel messages and warnings and which allows
- logins in single user mode.
-
- Even if you say Y here, the currently visible framebuffer console
- (/dev/tty0) will still be used as the default system console, but
- you can alter that using a kernel command line, for example
- "console=ttyAM1".
-
config SERIAL_CPM
tristate "CPM SCC/SMC serial port support"
depends on CPM2 || 8xx
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index d94dc005c8a6..31e868cb49b2 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -54,7 +54,6 @@ obj-$(CONFIG_SERIAL_68328) += 68328serial.o
obj-$(CONFIG_SERIAL_68360) += 68360serial.o
obj-$(CONFIG_SERIAL_MCF) += mcf.o
obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
-obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
obj-$(CONFIG_SERIAL_DZ) += dz.o
obj-$(CONFIG_SERIAL_ZS) += zs.o
obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o
diff --git a/drivers/tty/serial/serial_lh7a40x.c b/drivers/tty/serial/serial_lh7a40x.c
deleted file mode 100644
index ea744707c4d6..000000000000
--- a/drivers/tty/serial/serial_lh7a40x.c
+++ /dev/null
@@ -1,682 +0,0 @@
-/* drivers/serial/serial_lh7a40x.c
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-/* Driver for Sharp LH7A40X embedded serial ports
- *
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- * Based on drivers/serial/amba.c, by Deep Blue Solutions Ltd.
- *
- * ---
- *
- * This driver supports the embedded UARTs of the Sharp LH7A40X series
- * CPUs. While similar to the 16550 and other UART chips, there is
- * nothing close to register compatibility. Moreover, some of the
- * modem control lines are not available, either in the chip or they
- * are lacking in the board-level implementation.
- *
- * - Use of SIRDIS
- * For simplicity, we disable the IR functions of any UART whenever
- * we enable it.
- *
- */
-
-
-#if defined(CONFIG_SERIAL_LH7A40X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#define DEV_MAJOR 204
-#define DEV_MINOR 16
-#define DEV_NR 3
-
-#define ISR_LOOP_LIMIT 256
-
-#define UR(p,o) _UR ((p)->membase, o)
-#define _UR(b,o) (*((volatile unsigned int*)(((unsigned char*) b) + (o))))
-#define BIT_CLR(p,o,m) UR(p,o) = UR(p,o) & (~(unsigned int)m)
-#define BIT_SET(p,o,m) UR(p,o) = UR(p,o) | ( (unsigned int)m)
-
-#define UART_REG_SIZE 32
-
-#define UART_R_DATA (0x00)
-#define UART_R_FCON (0x04)
-#define UART_R_BRCON (0x08)
-#define UART_R_CON (0x0c)
-#define UART_R_STATUS (0x10)
-#define UART_R_RAWISR (0x14)
-#define UART_R_INTEN (0x18)
-#define UART_R_ISR (0x1c)
-
-#define UARTEN (0x01) /* UART enable */
-#define SIRDIS (0x02) /* Serial IR disable (UART1 only) */
-
-#define RxEmpty (0x10)
-#define TxEmpty (0x80)
-#define TxFull (0x20)
-#define nRxRdy RxEmpty
-#define nTxRdy TxFull
-#define TxBusy (0x08)
-
-#define RxBreak (0x0800)
-#define RxOverrunError (0x0400)
-#define RxParityError (0x0200)
-#define RxFramingError (0x0100)
-#define RxError (RxBreak | RxOverrunError | RxParityError | RxFramingError)
-
-#define DCD (0x04)
-#define DSR (0x02)
-#define CTS (0x01)
-
-#define RxInt (0x01)
-#define TxInt (0x02)
-#define ModemInt (0x04)
-#define RxTimeoutInt (0x08)
-
-#define MSEOI (0x10)
-
-#define WLEN_8 (0x60)
-#define WLEN_7 (0x40)
-#define WLEN_6 (0x20)
-#define WLEN_5 (0x00)
-#define WLEN (0x60) /* Mask for all word-length bits */
-#define STP2 (0x08)
-#define PEN (0x02) /* Parity Enable */
-#define EPS (0x04) /* Even Parity Set */
-#define FEN (0x10) /* FIFO Enable */
-#define BRK (0x01) /* Send Break */
-
-
-struct uart_port_lh7a40x {
- struct uart_port port;
- unsigned int statusPrev; /* Most recently read modem status */
-};
-
-static void lh7a40xuart_stop_tx (struct uart_port* port)
-{
- BIT_CLR (port, UART_R_INTEN, TxInt);
-}
-
-static void lh7a40xuart_start_tx (struct uart_port* port)
-{
- BIT_SET (port, UART_R_INTEN, TxInt);
-
- /* *** FIXME: do I need to check for startup of the
- transmitter? The old driver did, but AMBA
- doesn't . */
-}
-
-static void lh7a40xuart_stop_rx (struct uart_port* port)
-{
- BIT_SET (port, UART_R_INTEN, RxTimeoutInt | RxInt);
-}
-
-static void lh7a40xuart_enable_ms (struct uart_port* port)
-{
- BIT_SET (port, UART_R_INTEN, ModemInt);
-}
-
-static void lh7a40xuart_rx_chars (struct uart_port* port)
-{
- struct tty_struct* tty = port->state->port.tty;
- int cbRxMax = 256; /* (Gross) limit on receive */
- unsigned int data; /* Received data and status */
- unsigned int flag;
-
- while (!(UR (port, UART_R_STATUS) & nRxRdy) && --cbRxMax) {
- data = UR (port, UART_R_DATA);
- flag = TTY_NORMAL;
- ++port->icount.rx;
-
- if (unlikely(data & RxError)) {
- if (data & RxBreak) {
- data &= ~(RxFramingError | RxParityError);
- ++port->icount.brk;
- if (uart_handle_break (port))
- continue;
- }
- else if (data & RxParityError)
- ++port->icount.parity;
- else if (data & RxFramingError)
- ++port->icount.frame;
- if (data & RxOverrunError)
- ++port->icount.overrun;
-
- /* Mask by termios, leave Rx'd byte */
- data &= port->read_status_mask | 0xff;
-
- if (data & RxBreak)
- flag = TTY_BREAK;
- else if (data & RxParityError)
- flag = TTY_PARITY;
- else if (data & RxFramingError)
- flag = TTY_FRAME;
- }
-
- if (uart_handle_sysrq_char (port, (unsigned char) data))
- continue;
-
- uart_insert_char(port, data, RxOverrunError, data, flag);
- }
- tty_flip_buffer_push (tty);
- return;
-}
-
-static void lh7a40xuart_tx_chars (struct uart_port* port)
-{
- struct circ_buf* xmit = &port->state->xmit;
- int cbTxMax = port->fifosize;
-
- if (port->x_char) {
- UR (port, UART_R_DATA) = port->x_char;
- ++port->icount.tx;
- port->x_char = 0;
- return;
- }
- if (uart_circ_empty (xmit) || uart_tx_stopped (port)) {
- lh7a40xuart_stop_tx (port);
- return;
- }
-
- /* Unlike the AMBA UART, the lh7a40x UART does not guarantee
- that at least half of the FIFO is empty. Instead, we check
- status for every character. Using the AMBA method causes
- the transmitter to drop characters. */
-
- do {
- UR (port, UART_R_DATA) = xmit->buf[xmit->tail];
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- ++port->icount.tx;
- if (uart_circ_empty(xmit))
- break;
- } while (!(UR (port, UART_R_STATUS) & nTxRdy)
- && cbTxMax--);
-
- if (uart_circ_chars_pending (xmit) < WAKEUP_CHARS)
- uart_write_wakeup (port);
-
- if (uart_circ_empty (xmit))
- lh7a40xuart_stop_tx (port);
-}
-
-static void lh7a40xuart_modem_status (struct uart_port* port)
-{
- unsigned int status = UR (port, UART_R_STATUS);
- unsigned int delta
- = status ^ ((struct uart_port_lh7a40x*) port)->statusPrev;
-
- BIT_SET (port, UART_R_RAWISR, MSEOI); /* Clear modem status intr */
-
- if (!delta) /* Only happens if we missed 2 transitions */
- return;
-
- ((struct uart_port_lh7a40x*) port)->statusPrev = status;
-
- if (delta & DCD)
- uart_handle_dcd_change (port, status & DCD);
-
- if (delta & DSR)
- ++port->icount.dsr;
-
- if (delta & CTS)
- uart_handle_cts_change (port, status & CTS);
-
- wake_up_interruptible (&port->state->port.delta_msr_wait);
-}
-
-static irqreturn_t lh7a40xuart_int (int irq, void* dev_id)
-{
- struct uart_port* port = dev_id;
- unsigned int cLoopLimit = ISR_LOOP_LIMIT;
- unsigned int isr = UR (port, UART_R_ISR);
-
-
- do {
- if (isr & (RxInt | RxTimeoutInt))
- lh7a40xuart_rx_chars(port);
- if (isr & ModemInt)
- lh7a40xuart_modem_status (port);
- if (isr & TxInt)
- lh7a40xuart_tx_chars (port);
-
- if (--cLoopLimit == 0)
- break;
-
- isr = UR (port, UART_R_ISR);
- } while (isr & (RxInt | TxInt | RxTimeoutInt));
-
- return IRQ_HANDLED;
-}
-
-static unsigned int lh7a40xuart_tx_empty (struct uart_port* port)
-{
- return (UR (port, UART_R_STATUS) & TxEmpty) ? TIOCSER_TEMT : 0;
-}
-
-static unsigned int lh7a40xuart_get_mctrl (struct uart_port* port)
-{
- unsigned int result = 0;
- unsigned int status = UR (port, UART_R_STATUS);
-
- if (status & DCD)
- result |= TIOCM_CAR;
- if (status & DSR)
- result |= TIOCM_DSR;
- if (status & CTS)
- result |= TIOCM_CTS;
-
- return result;
-}
-
-static void lh7a40xuart_set_mctrl (struct uart_port* port, unsigned int mctrl)
-{
- /* None of the ports supports DTR. UART1 supports RTS through GPIO. */
- /* Note, kernel appears to be setting DTR and RTS on console. */
-
- /* *** FIXME: this deserves more work. There's some work in
- tracing all of the IO pins. */
-#if 0
- if( port->mapbase == UART1_PHYS) {
- gpioRegs_t *gpio = (gpioRegs_t *)IO_ADDRESS(GPIO_PHYS);
-
- if (mctrl & TIOCM_RTS)
- gpio->pbdr &= ~GPIOB_UART1_RTS;
- else
- gpio->pbdr |= GPIOB_UART1_RTS;
- }
-#endif
-}
-
-static void lh7a40xuart_break_ctl (struct uart_port* port, int break_state)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&port->lock, flags);
- if (break_state == -1)
- BIT_SET (port, UART_R_FCON, BRK); /* Assert break */
- else
- BIT_CLR (port, UART_R_FCON, BRK); /* Deassert break */
- spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static int lh7a40xuart_startup (struct uart_port* port)
-{
- int retval;
-
- retval = request_irq (port->irq, lh7a40xuart_int, 0,
- "serial_lh7a40x", port);
- if (retval)
- return retval;
-
- /* Initial modem control-line settings */
- ((struct uart_port_lh7a40x*) port)->statusPrev
- = UR (port, UART_R_STATUS);
-
- /* There is presently no configuration option to enable IR.
- Thus, we always disable it. */
-
- BIT_SET (port, UART_R_CON, UARTEN | SIRDIS);
- BIT_SET (port, UART_R_INTEN, RxTimeoutInt | RxInt);
-
- return 0;
-}
-
-static void lh7a40xuart_shutdown (struct uart_port* port)
-{
- free_irq (port->irq, port);
- BIT_CLR (port, UART_R_FCON, BRK | FEN);
- BIT_CLR (port, UART_R_CON, UARTEN);
-}
-
-static void lh7a40xuart_set_termios (struct uart_port* port,
- struct ktermios* termios,
- struct ktermios* old)
-{
- unsigned int con;
- unsigned int inten;
- unsigned int fcon;
- unsigned long flags;
- unsigned int baud;
- unsigned int quot;
-
- baud = uart_get_baud_rate (port, termios, old, 8, port->uartclk/16);
- quot = uart_get_divisor (port, baud); /* -1 performed elsewhere */
-
- switch (termios->c_cflag & CSIZE) {
- case CS5:
- fcon = WLEN_5;
- break;
- case CS6:
- fcon = WLEN_6;
- break;
- case CS7:
- fcon = WLEN_7;
- break;
- case CS8:
- default:
- fcon = WLEN_8;
- break;
- }
- if (termios->c_cflag & CSTOPB)
- fcon |= STP2;
- if (termios->c_cflag & PARENB) {
- fcon |= PEN;
- if (!(termios->c_cflag & PARODD))
- fcon |= EPS;
- }
- if (port->fifosize > 1)
- fcon |= FEN;
-
- spin_lock_irqsave (&port->lock, flags);
-
- uart_update_timeout (port, termios->c_cflag, baud);
-
- port->read_status_mask = RxOverrunError;
- if (termios->c_iflag & INPCK)
- port->read_status_mask |= RxFramingError | RxParityError;
- if (termios->c_iflag & (BRKINT | PARMRK))
- port->read_status_mask |= RxBreak;
-
- /* Figure mask for status we ignore */
- port->ignore_status_mask = 0;
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= RxFramingError | RxParityError;
- if (termios->c_iflag & IGNBRK) {
- port->ignore_status_mask |= RxBreak;
- /* Ignore overrun when ignorning parity */
- /* *** FIXME: is this in the right place? */
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= RxOverrunError;
- }
-
- /* Ignore all receive errors when receive disabled */
- if ((termios->c_cflag & CREAD) == 0)
- port->ignore_status_mask |= RxError;
-
- con = UR (port, UART_R_CON);
- inten = (UR (port, UART_R_INTEN) & ~ModemInt);
-
- if (UART_ENABLE_MS (port, termios->c_cflag))
- inten |= ModemInt;
-
- BIT_CLR (port, UART_R_CON, UARTEN); /* Disable UART */
- UR (port, UART_R_INTEN) = 0; /* Disable interrupts */
- UR (port, UART_R_BRCON) = quot - 1; /* Set baud rate divisor */
- UR (port, UART_R_FCON) = fcon; /* Set FIFO and frame ctrl */
- UR (port, UART_R_INTEN) = inten; /* Enable interrupts */
- UR (port, UART_R_CON) = con; /* Restore UART mode */
-
- spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static const char* lh7a40xuart_type (struct uart_port* port)
-{
- return port->type == PORT_LH7A40X ? "LH7A40X" : NULL;
-}
-
-static void lh7a40xuart_release_port (struct uart_port* port)
-{
- release_mem_region (port->mapbase, UART_REG_SIZE);
-}
-
-static int lh7a40xuart_request_port (struct uart_port* port)
-{
- return request_mem_region (port->mapbase, UART_REG_SIZE,
- "serial_lh7a40x") != NULL
- ? 0 : -EBUSY;
-}
-
-static void lh7a40xuart_config_port (struct uart_port* port, int flags)
-{
- if (flags & UART_CONFIG_TYPE) {
- port->type = PORT_LH7A40X;
- lh7a40xuart_request_port (port);
- }
-}
-
-static int lh7a40xuart_verify_port (struct uart_port* port,
- struct serial_struct* ser)
-{
- int ret = 0;
-
- if (ser->type != PORT_UNKNOWN && ser->type != PORT_LH7A40X)
- ret = -EINVAL;
- if (ser->irq < 0 || ser->irq >= nr_irqs)
- ret = -EINVAL;
- if (ser->baud_base < 9600) /* *** FIXME: is this true? */
- ret = -EINVAL;
- return ret;
-}
-
-static struct uart_ops lh7a40x_uart_ops = {
- .tx_empty = lh7a40xuart_tx_empty,
- .set_mctrl = lh7a40xuart_set_mctrl,
- .get_mctrl = lh7a40xuart_get_mctrl,
- .stop_tx = lh7a40xuart_stop_tx,
- .start_tx = lh7a40xuart_start_tx,
- .stop_rx = lh7a40xuart_stop_rx,
- .enable_ms = lh7a40xuart_enable_ms,
- .break_ctl = lh7a40xuart_break_ctl,
- .startup = lh7a40xuart_startup,
- .shutdown = lh7a40xuart_shutdown,
- .set_termios = lh7a40xuart_set_termios,
- .type = lh7a40xuart_type,
- .release_port = lh7a40xuart_release_port,
- .request_port = lh7a40xuart_request_port,
- .config_port = lh7a40xuart_config_port,
- .verify_port = lh7a40xuart_verify_port,
-};
-
-static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = {
- {
- .port = {
- .membase = (void*) io_p2v (UART1_PHYS),
- .mapbase = UART1_PHYS,
- .iotype = UPIO_MEM,
- .irq = IRQ_UART1INTR,
- .uartclk = 14745600/2,
- .fifosize = 16,
- .ops = &lh7a40x_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 0,
- },
- },
- {
- .port = {
- .membase = (void*) io_p2v (UART2_PHYS),
- .mapbase = UART2_PHYS,
- .iotype = UPIO_MEM,
- .irq = IRQ_UART2INTR,
- .uartclk = 14745600/2,
- .fifosize = 16,
- .ops = &lh7a40x_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 1,
- },
- },
- {
- .port = {
- .membase = (void*) io_p2v (UART3_PHYS),
- .mapbase = UART3_PHYS,
- .iotype = UPIO_MEM,
- .irq = IRQ_UART3INTR,
- .uartclk = 14745600/2,
- .fifosize = 16,
- .ops = &lh7a40x_uart_ops,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 2,
- },
- },
-};
-
-#ifndef CONFIG_SERIAL_LH7A40X_CONSOLE
-# define LH7A40X_CONSOLE NULL
-#else
-# define LH7A40X_CONSOLE &lh7a40x_console
-
-static void lh7a40xuart_console_putchar(struct uart_port *port, int ch)
-{
- while (UR(port, UART_R_STATUS) & nTxRdy)
- ;
- UR(port, UART_R_DATA) = ch;
-}
-
-static void lh7a40xuart_console_write (struct console* co,
- const char* s,
- unsigned int count)
-{
- struct uart_port* port = &lh7a40x_ports[co->index].port;
- unsigned int con = UR (port, UART_R_CON);
- unsigned int inten = UR (port, UART_R_INTEN);
-
-
- UR (port, UART_R_INTEN) = 0; /* Disable all interrupts */
- BIT_SET (port, UART_R_CON, UARTEN | SIRDIS); /* Enable UART */
-
- uart_console_write(port, s, count, lh7a40xuart_console_putchar);
-
- /* Wait until all characters are sent */
- while (UR (port, UART_R_STATUS) & TxBusy)
- ;
-
- /* Restore control and interrupt mask */
- UR (port, UART_R_CON) = con;
- UR (port, UART_R_INTEN) = inten;
-}
-
-static void __init lh7a40xuart_console_get_options (struct uart_port* port,
- int* baud,
- int* parity,
- int* bits)
-{
- if (UR (port, UART_R_CON) & UARTEN) {
- unsigned int fcon = UR (port, UART_R_FCON);
- unsigned int quot = UR (port, UART_R_BRCON) + 1;
-
- switch (fcon & (PEN | EPS)) {
- default: *parity = 'n'; break;
- case PEN: *parity = 'o'; break;
- case PEN | EPS: *parity = 'e'; break;
- }
-
- switch (fcon & WLEN) {
- default:
- case WLEN_8: *bits = 8; break;
- case WLEN_7: *bits = 7; break;
- case WLEN_6: *bits = 6; break;
- case WLEN_5: *bits = 5; break;
- }
-
- *baud = port->uartclk/(16*quot);
- }
-}
-
-static int __init lh7a40xuart_console_setup (struct console* co, char* options)
-{
- struct uart_port* port;
- int baud = 38400;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- if (co->index >= DEV_NR) /* Bounds check on device number */
- co->index = 0;
- port = &lh7a40x_ports[co->index].port;
-
- if (options)
- uart_parse_options (options, &baud, &parity, &bits, &flow);
- else
- lh7a40xuart_console_get_options (port, &baud, &parity, &bits);
-
- return uart_set_options (port, co, baud, parity, bits, flow);
-}
-
-static struct uart_driver lh7a40x_reg;
-static struct console lh7a40x_console = {
- .name = "ttyAM",
- .write = lh7a40xuart_console_write,
- .device = uart_console_device,
- .setup = lh7a40xuart_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
- .data = &lh7a40x_reg,
-};
-
-static int __init lh7a40xuart_console_init(void)
-{
- register_console (&lh7a40x_console);
- return 0;
-}
-
-console_initcall (lh7a40xuart_console_init);
-
-#endif
-
-static struct uart_driver lh7a40x_reg = {
- .owner = THIS_MODULE,
- .driver_name = "ttyAM",
- .dev_name = "ttyAM",
- .major = DEV_MAJOR,
- .minor = DEV_MINOR,
- .nr = DEV_NR,
- .cons = LH7A40X_CONSOLE,
-};
-
-static int __init lh7a40xuart_init(void)
-{
- int ret;
-
- printk (KERN_INFO "serial: LH7A40X serial driver\n");
-
- ret = uart_register_driver (&lh7a40x_reg);
-
- if (ret == 0) {
- int i;
-
- for (i = 0; i < DEV_NR; i++) {
- /* UART3, when used, requires GPIO pin reallocation */
- if (lh7a40x_ports[i].port.mapbase == UART3_PHYS)
- GPIO_PINMUX |= 1<<3;
- uart_add_one_port (&lh7a40x_reg,
- &lh7a40x_ports[i].port);
- }
- }
- return ret;
-}
-
-static void __exit lh7a40xuart_exit(void)
-{
- int i;
-
- for (i = 0; i < DEV_NR; i++)
- uart_remove_one_port (&lh7a40x_reg, &lh7a40x_ports[i].port);
-
- uart_unregister_driver (&lh7a40x_reg);
-}
-
-module_init (lh7a40xuart_init);
-module_exit (lh7a40xuart_exit);
-
-MODULE_AUTHOR ("Marc Singer");
-MODULE_DESCRIPTION ("Sharp LH7A40X serial port driver");
-MODULE_LICENSE ("GPL");