summaryrefslogtreecommitdiffstats
path: root/drivers/tty
diff options
context:
space:
mode:
authorSebastian Andrzej Siewior <bigeasy@linutronix.de>2014-09-10 21:29:58 +0200
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2014-09-26 18:01:56 +0200
commit0aa525d11859c1a4d5b78fdc704148e2ae03ae13 (patch)
tree716c43ede261700ea3e278b708ff2564ece41425 /drivers/tty
parenttty: serial: 8250_core: add run time pm (diff)
downloadlinux-0aa525d11859c1a4d5b78fdc704148e2ae03ae13.tar.xz
linux-0aa525d11859c1a4d5b78fdc704148e2ae03ae13.zip
tty: serial: 8250_core: read only RX if there is something in the FIFO
The serial8250_do_startup() function unconditionally clears the interrupts and for that it reads from the RX-FIFO without checking if there is a byte in the FIFO or not. This works fine on OMAP4+ HW like AM335x or DRA7. OMAP3630 ES1.1 (which means probably all OMAP3 and earlier) does not like this: |Unhandled fault: external abort on non-linefetch (0x1028) at 0xfb020000 |Internal error: : 1028 [#1] ARM |Modules linked in: |CPU: 0 PID: 1 Comm: swapper Not tainted 3.16.0-00022-g7edcb57-dirty #1213 |task: de0572c0 ti: de058000 task.ti: de058000 |PC is at mem32_serial_in+0xc/0x1c |LR is at serial8250_do_startup+0x220/0x85c |Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel |Control: 10c5387d Table: 80004019 DAC: 00000015 |[<c03051d4>] (mem32_serial_in) from [<c0307fe8>] (serial8250_do_startup+0x220/0x85c) |[<c0307fe8>] (serial8250_do_startup) from [<c0309e00>] (omap_8250_startup+0x5c/0xe0) |[<c0309e00>] (omap_8250_startup) from [<c030863c>] (serial8250_startup+0x18/0x2c) |[<c030863c>] (serial8250_startup) from [<c030394c>] (uart_startup+0x78/0x1d8) |[<c030394c>] (uart_startup) from [<c0304678>] (uart_open+0xe8/0x114) |[<c0304678>] (uart_open) from [<c02e9e10>] (tty_open+0x1a8/0x5a4) Reviewed-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/8250/8250_core.c11
1 files changed, 6 insertions, 5 deletions
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 3cf5c98013e4..547afde9fdda 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -2088,8 +2088,8 @@ int serial8250_do_startup(struct uart_port *port)
/*
* Clear the interrupt registers.
*/
- serial_port_in(port, UART_LSR);
- serial_port_in(port, UART_RX);
+ if (serial_port_in(port, UART_LSR) & UART_LSR_DR)
+ serial_port_in(port, UART_RX);
serial_port_in(port, UART_IIR);
serial_port_in(port, UART_MSR);
@@ -2250,8 +2250,8 @@ dont_test_tx_en:
* saved flags to avoid getting false values from polling
* routines or the previous session.
*/
- serial_port_in(port, UART_LSR);
- serial_port_in(port, UART_RX);
+ if (serial_port_in(port, UART_LSR) & UART_LSR_DR)
+ serial_port_in(port, UART_RX);
serial_port_in(port, UART_IIR);
serial_port_in(port, UART_MSR);
up->lsr_saved_flags = 0;
@@ -2344,7 +2344,8 @@ void serial8250_do_shutdown(struct uart_port *port)
* Read data port to reset things, and then unlink from
* the IRQ chain.
*/
- serial_port_in(port, UART_RX);
+ if (serial_port_in(port, UART_LSR) & UART_LSR_DR)
+ serial_port_in(port, UART_RX);
serial8250_rpm_put(up);
del_timer_sync(&up->timer);