diff options
| author | Bryan O'Donoghue <pure.logic@nexus-software.ie> | 2014-09-23 02:21:11 +0200 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2014-09-29 03:25:21 +0200 |
| commit | 1ede7dcca3c4fa15a518ab0473126f9c3e621e4c (patch) | |
| tree | 5dee7309903d8c31606435b12f6fafb617832680 /drivers/tty | |
| parent | tty: omap-serial: pull out calculation from baud_is_mode16 (diff) | |
| download | linux-1ede7dcca3c4fa15a518ab0473126f9c3e621e4c.tar.xz linux-1ede7dcca3c4fa15a518ab0473126f9c3e621e4c.zip | |
serial: 8250: Add Quark X1000 to 8250_pci.c
Quark X1000 contains two designware derived 8250 serial ports.
Each port has a unique PCI configuration space consisting of
BAR0:UART BAR1:DMA respectively.
Unlike the standard 8250 the register width is 32 bits for RHR,IER etc
The Quark UART has a fundamental clock @ 44.2368 MHz allowing for a
bitrate of up to about 2.76 megabits per second.
This patch enables standard 8250 mode
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 21 |
1 files changed, 21 insertions, 0 deletions
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 61830b1792eb..14d3e6be8800 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1788,6 +1788,7 @@ pci_wch_ch353_setup(struct serial_private *priv, #define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e +#define PCI_DEVICE_ID_INTEL_QRK_UART 0x0936 #define PCI_VENDOR_ID_SUNIX 0x1fd4 #define PCI_DEVICE_ID_SUNIX_1999 0x1999 @@ -1898,6 +1899,13 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = byt_serial_setup, }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_QRK_UART, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_default_setup, + }, /* * ITE */ @@ -2740,6 +2748,7 @@ enum pci_board_num_t { pbn_ADDIDATA_PCIe_8_3906250, pbn_ce4100_1_115200, pbn_byt, + pbn_qrk, pbn_omegapci, pbn_NETMOS9900_2s_115200, pbn_brcm_trumanage, @@ -3490,6 +3499,12 @@ static struct pciserial_board pci_boards[] = { .uart_offset = 0x80, .reg_shift = 2, }, + [pbn_qrk] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 2764800, + .reg_shift = 2, + }, [pbn_omegapci] = { .flags = FL_BASE0, .num_ports = 8, @@ -5192,6 +5207,12 @@ static struct pci_device_id serial_pci_tbl[] = { pbn_byt }, /* + * Intel Quark x1000 + */ + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_UART, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_qrk }, + /* * Cronyx Omega PCI */ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_CRONYX_OMEGA, |