Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh

SuperH updates for 3.3 merge window.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (38 commits)
  sh: magicpanelr2: Update for parse_mtd_partitions() fallout.
  sh: mach-rsk: Update for parse_mtd_partitions() fallout.
  sh: sh2a: Improve cache flush/invalidate functions
  sh: also without PM_RUNTIME pm_runtime.o must be built
  sh: add a resource name for shdma
  sh: Remove redundant try_to_freeze() invocations.
  sh: Ensure IRQs are enabled across do_notify_resume().
  sh: Fix up store queue code for subsys_interface changes.
  sh: clkfwk: sh_clk_init_parent() should be called after clk_register()
  sh: add platform_device for renesas_usbhs in board-sh7757lcr
  sh: modify clock-sh7757 for renesas_usbhs
  sh: pfc: ioremap() support
  sh: use ioread32/iowrite32 and mapped_reg for div6
  sh: use ioread32/iowrite32 and mapped_reg for div4
  sh: use ioread32/iowrite32 and mapped_reg for mstp32
  sh: extend clock struct with mapped_reg member
  sh: clkfwk: clock-sh73a0: all div6_clks use SH_CLK_DIV6_EXT()
  sh: clkfwk: clock-sh7724: all div6_clks use SH_CLK_DIV6_EXT()
  sh: clock-sh7723: add CLKDEV_ICK_ID for cleanup
  serial: sh-sci: Handle GPIO function requests.
  ...

1 files changed, 165 insertions, 18 deletions

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index aff9d612dff0..9e62349b3d9f 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -50,6 +50,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/scatterlist.h>
 #include <linux/slab.h>
+#include <linux/gpio.h>
 
 #ifdef CONFIG_SUPERH
 #include <asm/sh_bios.h>
@@ -73,6 +74,7 @@ struct sci_port {
 	struct clk		*fclk;
 
 	char			*irqstr[SCIx_NR_IRQS];
+	char			*gpiostr[SCIx_NR_FNS];
 
 	struct dma_chan			*chan_tx;
 	struct dma_chan			*chan_rx;
@@ -474,8 +476,15 @@ static void sci_init_pins(struct uart_port *port, unsigned int cflag)
 	if (!reg->size)
 		return;
 
-	if (!(cflag & CRTSCTS))
-		sci_out(port, SCSPTR, 0x0080); /* Set RTS = 1 */
+	if ((s->cfg->capabilities & SCIx_HAVE_RTSCTS) &&
+	    ((!(cflag & CRTSCTS)))) {
+		unsigned short status;
+
+		status = sci_in(port, SCSPTR);
+		status &= ~SCSPTR_CTSIO;
+		status |= SCSPTR_RTSIO;
+		sci_out(port, SCSPTR, status); /* Set RTS = 1 */
+	}
 }
 
 static int sci_txfill(struct uart_port *port)
@@ -621,6 +630,7 @@ static void sci_receive_chars(struct uart_port *port)
 		} else {
 			for (i = 0; i < count; i++) {
 				char c = sci_in(port, SCxRDR);
+
 				status = sci_in(port, SCxSR);
 #if defined(CONFIG_CPU_SH3)
 				/* Skip "chars" during break */
@@ -649,9 +659,11 @@ static void sci_receive_chars(struct uart_port *port)
 				/* Store data and status */
 				if (status & SCxSR_FER(port)) {
 					flag = TTY_FRAME;
+					port->icount.frame++;
 					dev_notice(port->dev, "frame error\n");
 				} else if (status & SCxSR_PER(port)) {
 					flag = TTY_PARITY;
+					port->icount.parity++;
 					dev_notice(port->dev, "parity error\n");
 				} else
 					flag = TTY_NORMAL;
@@ -723,6 +735,8 @@ static int sci_handle_errors(struct uart_port *port)
 	 */
 	if (s->cfg->overrun_bit != SCIx_NOT_SUPPORTED) {
 		if (status & (1 << s->cfg->overrun_bit)) {
+			port->icount.overrun++;
+
 			/* overrun error */
 			if (tty_insert_flip_char(tty, 0, TTY_OVERRUN))
 				copied++;
@@ -737,6 +751,8 @@ static int sci_handle_errors(struct uart_port *port)
 			struct sci_port *sci_port = to_sci_port(port);
 
 			if (!sci_port->break_flag) {
+				port->icount.brk++;
+
 				sci_port->break_flag = 1;
 				sci_schedule_break_timer(sci_port);
 
@@ -752,6 +768,8 @@ static int sci_handle_errors(struct uart_port *port)
 
 		} else {
 			/* frame error */
+			port->icount.frame++;
+
 			if (tty_insert_flip_char(tty, 0, TTY_FRAME))
 				copied++;
 
@@ -761,6 +779,8 @@ static int sci_handle_errors(struct uart_port *port)
 
 	if (status & SCxSR_PER(port)) {
 		/* parity error */
+		port->icount.parity++;
+
 		if (tty_insert_flip_char(tty, 0, TTY_PARITY))
 			copied++;
 
@@ -787,6 +807,8 @@ static int sci_handle_fifo_overrun(struct uart_port *port)
 	if ((sci_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) {
 		sci_out(port, SCLSR, 0);
 
+		port->icount.overrun++;
+
 		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
 		tty_flip_buffer_push(tty);
 
@@ -812,6 +834,9 @@ static int sci_handle_breaks(struct uart_port *port)
 		/* Debounce break */
 		s->break_flag = 1;
 #endif
+
+		port->icount.brk++;
+
 		/* Notify of BREAK */
 		if (tty_insert_flip_char(tty, 0, TTY_BREAK))
 			copied++;
@@ -1082,6 +1107,67 @@ static void sci_free_irq(struct sci_port *port)
 	}
 }
 
+static const char *sci_gpio_names[SCIx_NR_FNS] = {
+	"sck", "rxd", "txd", "cts", "rts",
+};
+
+static const char *sci_gpio_str(unsigned int index)
+{
+	return sci_gpio_names[index];
+}
+
+static void __devinit sci_init_gpios(struct sci_port *port)
+{
+	struct uart_port *up = &port->port;
+	int i;
+
+	if (!port->cfg)
+		return;
+
+	for (i = 0; i < SCIx_NR_FNS; i++) {
+		const char *desc;
+		int ret;
+
+		if (!port->cfg->gpios[i])
+			continue;
+
+		desc = sci_gpio_str(i);
+
+		port->gpiostr[i] = kasprintf(GFP_KERNEL, "%s:%s",
+					     dev_name(up->dev), desc);
+
+		/*
+		 * If we've failed the allocation, we can still continue
+		 * on with a NULL string.
+		 */
+		if (!port->gpiostr[i])
+			dev_notice(up->dev, "%s string allocation failure\n",
+				   desc);
+
+		ret = gpio_request(port->cfg->gpios[i], port->gpiostr[i]);
+		if (unlikely(ret != 0)) {
+			dev_notice(up->dev, "failed %s gpio request\n", desc);
+
+			/*
+			 * If we can't get the GPIO for whatever reason,
+			 * no point in keeping the verbose string around.
+			 */
+			kfree(port->gpiostr[i]);
+		}
+	}
+}
+
+static void sci_free_gpios(struct sci_port *port)
+{
+	int i;
+
+	for (i = 0; i < SCIx_NR_FNS; i++)
+		if (port->cfg->gpios[i]) {
+			gpio_free(port->cfg->gpios[i]);
+			kfree(port->gpiostr[i]);
+		}
+}
+
 static unsigned int sci_tx_empty(struct uart_port *port)
 {
 	unsigned short status = sci_in(port, SCxSR);
@@ -1090,19 +1176,39 @@ static unsigned int sci_tx_empty(struct uart_port *port)
 	return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0;
 }
 
+/*
+ * Modem control is a bit of a mixed bag for SCI(F) ports. Generally
+ * CTS/RTS is supported in hardware by at least one port and controlled
+ * via SCSPTR (SCxPCR for SCIFA/B parts), or external pins (presently
+ * handled via the ->init_pins() op, which is a bit of a one-way street,
+ * lacking any ability to defer pin control -- this will later be
+ * converted over to the GPIO framework).
+ *
+ * Other modes (such as loopback) are supported generically on certain
+ * port types, but not others. For these it's sufficient to test for the
+ * existence of the support register and simply ignore the port type.
+ */
 static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
-	/* This routine is used for seting signals of: DTR, DCD, CTS/RTS */
-	/* We use SCIF's hardware for CTS/RTS, so don't need any for that. */
-	/* If you have signals for DTR and DCD, please implement here. */
+	if (mctrl & TIOCM_LOOP) {
+		struct plat_sci_reg *reg;
+
+		/*
+		 * Standard loopback mode for SCFCR ports.
+		 */
+		reg = sci_getreg(port, SCFCR);
+		if (reg->size)
+			sci_out(port, SCFCR, sci_in(port, SCFCR) | 1);
+	}
 }
 
 static unsigned int sci_get_mctrl(struct uart_port *port)
 {
-	/* This routine is used for getting signals of: DTR, DCD, DSR, RI,
-	   and CTS/RTS */
-
-	return TIOCM_DTR | TIOCM_RTS | TIOCM_CTS | TIOCM_DSR;
+	/*
+	 * CTS/RTS is handled in hardware when supported, while nothing
+	 * else is wired up. Keep it simple and simply assert DSR/CAR.
+	 */
+	return TIOCM_DSR | TIOCM_CAR;
 }
 
 #ifdef CONFIG_SERIAL_SH_SCI_DMA
@@ -1449,12 +1555,17 @@ static void sci_stop_rx(struct uart_port *port)
 
 static void sci_enable_ms(struct uart_port *port)
 {
-	/* Nothing here yet .. */
+	/*
+	 * Not supported by hardware, always a nop.
+	 */
 }
 
 static void sci_break_ctl(struct uart_port *port, int break_state)
 {
-	/* Nothing here yet .. */
+	/*
+	 * Not supported by hardware. Most parts couple break and rx
+	 * interrupts together, with break detection always enabled.
+	 */
 }
 
 #ifdef CONFIG_SERIAL_SH_SCI_DMA
@@ -1652,6 +1763,7 @@ static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps,
 
 static void sci_reset(struct uart_port *port)
 {
+	struct plat_sci_reg *reg;
 	unsigned int status;
 
 	do {
@@ -1660,7 +1772,8 @@ static void sci_reset(struct uart_port *port)
 
 	sci_out(port, SCSCR, 0x00);	/* TE=0, RE=0, CKE1=0 */
 
-	if (port->type != PORT_SCI)
+	reg = sci_getreg(port, SCFCR);
+	if (reg->size)
 		sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
 }
 
@@ -1668,9 +1781,9 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 			    struct ktermios *old)
 {
 	struct sci_port *s = to_sci_port(port);
+	struct plat_sci_reg *reg;
 	unsigned int baud, smr_val, max_baud;
 	int t = -1;
-	u16 scfcr = 0;
 
 	/*
 	 * earlyprintk comes here early on with port->uartclk set to zero.
@@ -1720,7 +1833,27 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	}
 
 	sci_init_pins(port, termios->c_cflag);
-	sci_out(port, SCFCR, scfcr | ((termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0));
+
+	reg = sci_getreg(port, SCFCR);
+	if (reg->size) {
+		unsigned short ctrl = sci_in(port, SCFCR);
+
+		if (s->cfg->capabilities & SCIx_HAVE_RTSCTS) {
+			if (termios->c_cflag & CRTSCTS)
+				ctrl |= SCFCR_MCE;
+			else
+				ctrl &= ~SCFCR_MCE;
+		}
+
+		/*
+		 * As we've done a sci_reset() above, ensure we don't
+		 * interfere with the FIFOs while toggling MCE. As the
+		 * reset values could still be set, simply mask them out.
+		 */
+		ctrl &= ~(SCFCR_RFRST | SCFCR_TFRST);
+
+		sci_out(port, SCFCR, ctrl);
+	}
 
 	sci_out(port, SCSCR, s->cfg->scscr);
 
@@ -1892,6 +2025,8 @@ static int __devinit sci_init_single(struct platform_device *dev,
 	struct uart_port *port = &sci_port->port;
 	int ret;
 
+	sci_port->cfg	= p;
+
 	port->ops	= &sci_uart_ops;
 	port->iotype	= UPIO_MEM;
 	port->line	= index;
@@ -1937,6 +2072,8 @@ static int __devinit sci_init_single(struct platform_device *dev,
 
 		port->dev = &dev->dev;
 
+		sci_init_gpios(sci_port);
+
 		pm_runtime_irq_safe(&dev->dev);
 		pm_runtime_enable(&dev->dev);
 	}
@@ -1971,8 +2108,6 @@ static int __devinit sci_init_single(struct platform_device *dev,
 		p->error_mask |= (1 << p->overrun_bit);
 	}
 
-	sci_port->cfg		= p;
-
 	port->mapbase		= p->mapbase;
 	port->type		= p->type;
 	port->flags		= p->flags;
@@ -2113,9 +2248,16 @@ static int sci_runtime_suspend(struct device *dev)
 	struct uart_port *port = &sci_port->port;
 
 	if (uart_console(port)) {
+		struct plat_sci_reg *reg;
+
 		sci_port->saved_smr = sci_in(port, SCSMR);
 		sci_port->saved_brr = sci_in(port, SCBRR);
-		sci_port->saved_fcr = sci_in(port, SCFCR);
+
+		reg = sci_getreg(port, SCFCR);
+		if (reg->size)
+			sci_port->saved_fcr = sci_in(port, SCFCR);
+		else
+			sci_port->saved_fcr = 0;
 	}
 	return 0;
 }
@@ -2129,7 +2271,10 @@ static int sci_runtime_resume(struct device *dev)
 		sci_reset(port);
 		sci_out(port, SCSMR, sci_port->saved_smr);
 		sci_out(port, SCBRR, sci_port->saved_brr);
-		sci_out(port, SCFCR, sci_port->saved_fcr);
+
+		if (sci_port->saved_fcr)
+			sci_out(port, SCFCR, sci_port->saved_fcr);
+
 		sci_out(port, SCSCR, sci_port->cfg->scscr);
 	}
 	return 0;
@@ -2169,6 +2314,8 @@ static int sci_remove(struct platform_device *dev)
 	cpufreq_unregister_notifier(&port->freq_transition,
 				    CPUFREQ_TRANSITION_NOTIFIER);
 
+	sci_free_gpios(port);
+
 	uart_remove_one_port(&sci_uart_driver, &port->port);
 
 	clk_put(port->iclk);