serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers

Add tunable RX interrupt trigger I/F of FIFO buffers.

Serial devices are used as not only message communication devices but control
or sending communication devices. For the latter uses, normally small data
will be exchanged, so user applications want to receive data unit as soon as
possible for real-time tendency. If we have a sensor which sends a 1 byte data
each time and must control a device based on the sensor feedback, the RX
interrupt should be triggered for each data.

According to HW specification of serial UART devices, RX interrupt trigger
can be changed, but the trigger is hard-coded. For example, RX interrupt trigger
in 16550A can be set to 1, 4, 8, or 14 bytes for HW, but current driver sets
the trigger to only 8bytes.

This patch makes some devices change RX interrupt trigger from userland.

<How to use>
- Read current setting
 # cat /sys/class/tty/ttyS0/rx_trig_bytes
 8

- Write user setting
 # echo 1 > /sys/class/tty/ttyS0/rx_trig_bytes
 # cat /sys/class/tty/ttyS0/rx_trig_bytes
 1

<Support uart devices>
- 16550A and Tegra (1, 4, 8, or 14 bytes)
- 16650V2 (8, 16, 24, or 28 bytes)
- 16654 (8, 16, 56, or 60 bytes)
- 16750 (1, 16, 32, or 56 bytes)

<Change log>
Changes in V9:
 - Use attr_group instead of dev_spec_attr_group of uart_port structure

Changes in V8:
 - Divide this patch from V7's patch based on Greg's comment

Changes in V7:
 - Add Documentation
 - Change I/F name from rx_int_trig to rx_trig_bytes because the name
   rx_int_trig is hard to understand how users specify the value

Changes in V6:
 - Move FCR_RX_TRIG_* definition in 8250.h to include/uapi/linux/serial_reg.h,
   rename those to UART_FCR_R_TRIG_*, and use UART_FCR_TRIGGER_MASK to
   UART_FCR_R_TRIG_BITS()
 - Change following function names:
    convert_fcr2val() => fcr_get_rxtrig_bytes()
    convert_val2rxtrig() => bytes_to_fcr_rxtrig()
 - Fix typo in serial8250_do_set_termios()
 - Delete the verbose error message pr_info() in bytes_to_fcr_rxtrig()
 - Rename *rx_int_trig/rx_trig* to *rxtrig* for several functions or variables
   (but UI remains rx_int_trig)
 - Change the meaningless variable name 'val' to 'bytes' following functions:
    fcr_get_rxtrig_bytes(), bytes_to_fcr_rxtrig(), do_set_rxtrig(),
    do_serial8250_set_rxtrig(), and serial8250_set_attr_rxtrig()
 - Use up->fcr in order to get rxtrig_bytes instead of rx_trig_raw in
   fcr_get_rxtrig_bytes()
 - Use conf_type->rxtrig_bytes[0] instead of switch statement for support check
   in register_dev_spec_attr_grp()
 - Delete the checking whether a user changed FCR or not when minimum buffer
   is needed in serial8250_do_set_termios()

Changes in V5.1:
 - Fix FCR_RX_TRIG_MAX_STATE definition

Changes in V5:
 - Support Tegra, 16650V2, 16654, and 16750
 - Store default FCR value to up->fcr when the port is first created
 - Add rx_trig_byte[] in uart_config[] for each device and use rx_trig_byte[]
   in convert_fcr2val() and convert_val2rxtrig()

Changes in V4:
 - Introduce fifo_bug flag in uart_8250_port structure
   This is enabled only when parity is enabled and UART_BUG_PARITY is enabled
   for up->bugs. If this flag is enabled, user cannot set RX trigger.
 - Return -EOPNOTSUPP when it does not support device at convert_fcr2val() and
   at convert_val2rxtrig()
 - Set the nearest lower RX trigger when users input a meaningless value at
   convert_val2rxtrig()
 - Check whether p->fcr is existing at serial8250_clear_and_reinit_fifos()
 - Set fcr = up->fcr in the begging of serial8250_do_set_termios()

Changes in V3:
 - Change I/F from ioctl(2) to sysfs(rx_int_trig)

Changed in V2:
 - Use _IOW for TIOCSFIFORTRIG definition
 - Pass the interrupt trigger value itself

Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2 files changed, 160 insertions, 15 deletions

diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 1ebf8538b4fa..1b08c918cd51 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -12,6 +12,7 @@
  */
 
 #include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
 #include <linux/dmaengine.h>
 
 struct uart_8250_dma {
@@ -60,6 +61,7 @@ struct serial8250_config {
 	unsigned short	fifo_size;
 	unsigned short	tx_loadsz;
 	unsigned char	fcr;
+	unsigned char	rxtrig_bytes[UART_FCR_R_TRIG_MAX_STATE];
 	unsigned int	flags;
 };
 
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 0da01458816e..1d42dba6121d 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -31,7 +31,6 @@
 #include <linux/tty.h>
 #include <linux/ratelimit.h>
 #include <linux/tty_flip.h>
-#include <linux/serial_reg.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
 #include <linux/serial_8250.h>
@@ -161,6 +160,7 @@ static const struct serial8250_config uart_config[] = {
 		.fifo_size	= 16,
 		.tx_loadsz	= 16,
 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.rxtrig_bytes	= {1, 4, 8, 14},
 		.flags		= UART_CAP_FIFO,
 	},
 	[PORT_CIRRUS] = {
@@ -180,6 +180,7 @@ static const struct serial8250_config uart_config[] = {
 		.tx_loadsz	= 16,
 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
 				  UART_FCR_T_TRIG_00,
+		.rxtrig_bytes	= {8, 16, 24, 28},
 		.flags		= UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
 	},
 	[PORT_16750] = {
@@ -188,6 +189,7 @@ static const struct serial8250_config uart_config[] = {
 		.tx_loadsz	= 64,
 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
 				  UART_FCR7_64BYTE,
+		.rxtrig_bytes	= {1, 16, 32, 56},
 		.flags		= UART_CAP_FIFO | UART_CAP_SLEEP | UART_CAP_AFE,
 	},
 	[PORT_STARTECH] = {
@@ -209,6 +211,7 @@ static const struct serial8250_config uart_config[] = {
 		.tx_loadsz	= 32,
 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
 				  UART_FCR_T_TRIG_10,
+		.rxtrig_bytes	= {8, 16, 56, 60},
 		.flags		= UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
 	},
 	[PORT_16850] = {
@@ -266,6 +269,7 @@ static const struct serial8250_config uart_config[] = {
 		.tx_loadsz	= 8,
 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
 				  UART_FCR_T_TRIG_01,
+		.rxtrig_bytes	= {1, 4, 8, 14},
 		.flags		= UART_CAP_FIFO | UART_CAP_RTOIE,
 	},
 	[PORT_XR17D15X] = {
@@ -530,11 +534,8 @@ static void serial8250_clear_fifos(struct uart_8250_port *p)
 
 void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p)
 {
-	unsigned char fcr;
-
 	serial8250_clear_fifos(p);
-	fcr = uart_config[p->port.type].fcr;
-	serial_out(p, UART_FCR, fcr);
+	serial_out(p, UART_FCR, p->fcr);
 }
 EXPORT_SYMBOL_GPL(serial8250_clear_and_reinit_fifos);
 
@@ -2256,10 +2257,9 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 		          struct ktermios *old)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
-	unsigned char cval, fcr = 0;
+	unsigned char cval;
 	unsigned long flags;
 	unsigned int baud, quot;
-	int fifo_bug = 0;
 
 	switch (termios->c_cflag & CSIZE) {
 	case CS5:
@@ -2282,7 +2282,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 	if (termios->c_cflag & PARENB) {
 		cval |= UART_LCR_PARITY;
 		if (up->bugs & UART_BUG_PARITY)
-			fifo_bug = 1;
+			up->fifo_bug = true;
 	}
 	if (!(termios->c_cflag & PARODD))
 		cval |= UART_LCR_EPAR;
@@ -2306,10 +2306,10 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 		quot++;
 
 	if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) {
-		fcr = uart_config[port->type].fcr;
-		if ((baud < 2400 && !up->dma) || fifo_bug) {
-			fcr &= ~UART_FCR_TRIGGER_MASK;
-			fcr |= UART_FCR_TRIGGER_1;
+		/* NOTE: If fifo_bug is not set, a user can set RX_trigger. */
+		if ((baud < 2400 && !up->dma) || up->fifo_bug) {
+			up->fcr &= ~UART_FCR_TRIGGER_MASK;
+			up->fcr |= UART_FCR_TRIGGER_1;
 		}
 	}
 
@@ -2442,15 +2442,15 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 	 * is written without DLAB set, this mode will be disabled.
 	 */
 	if (port->type == PORT_16750)
-		serial_port_out(port, UART_FCR, fcr);
+		serial_port_out(port, UART_FCR, up->fcr);
 
 	serial_port_out(port, UART_LCR, cval);		/* reset DLAB */
 	up->lcr = cval;					/* Save LCR */
 	if (port->type != PORT_16750) {
 		/* emulated UARTs (Lucent Venus 167x) need two steps */
-		if (fcr & UART_FCR_ENABLE_FIFO)
+		if (up->fcr & UART_FCR_ENABLE_FIFO)
 			serial_port_out(port, UART_FCR, UART_FCR_ENABLE_FIFO);
-		serial_port_out(port, UART_FCR, fcr);		/* set fcr */
+		serial_port_out(port, UART_FCR, up->fcr);	/* set fcr */
 	}
 	serial8250_set_mctrl(port, port->mctrl);
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -2640,6 +2640,146 @@ static int serial8250_request_port(struct uart_port *port)
 	return ret;
 }
 
+static int fcr_get_rxtrig_bytes(struct uart_8250_port *up)
+{
+	const struct serial8250_config *conf_type = &uart_config[up->port.type];
+	unsigned char bytes;
+
+	bytes = conf_type->rxtrig_bytes[UART_FCR_R_TRIG_BITS(up->fcr)];
+
+	return bytes ? bytes : -EOPNOTSUPP;
+}
+
+static int bytes_to_fcr_rxtrig(struct uart_8250_port *up, unsigned char bytes)
+{
+	const struct serial8250_config *conf_type = &uart_config[up->port.type];
+	int i;
+
+	if (!conf_type->rxtrig_bytes[UART_FCR_R_TRIG_BITS(UART_FCR_R_TRIG_00)])
+		return -EOPNOTSUPP;
+
+	for (i = 1; i < UART_FCR_R_TRIG_MAX_STATE; i++) {
+		if (bytes < conf_type->rxtrig_bytes[i])
+			/* Use the nearest lower value */
+			return (--i) << UART_FCR_R_TRIG_SHIFT;
+	}
+
+	return UART_FCR_R_TRIG_11;
+}
+
+static int do_get_rxtrig(struct tty_port *port)
+{
+	struct uart_state *state = container_of(port, struct uart_state, port);
+	struct uart_port *uport = state->uart_port;
+	struct uart_8250_port *up =
+		container_of(uport, struct uart_8250_port, port);
+
+	if (!(up->capabilities & UART_CAP_FIFO) || uport->fifosize <= 1)
+		return -EINVAL;
+
+	return fcr_get_rxtrig_bytes(up);
+}
+
+static int do_serial8250_get_rxtrig(struct tty_port *port)
+{
+	int rxtrig_bytes;
+
+	mutex_lock(&port->mutex);
+	rxtrig_bytes = do_get_rxtrig(port);
+	mutex_unlock(&port->mutex);
+
+	return rxtrig_bytes;
+}
+
+static ssize_t serial8250_get_attr_rx_trig_bytes(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct tty_port *port = dev_get_drvdata(dev);
+	int rxtrig_bytes;
+
+	rxtrig_bytes = do_serial8250_get_rxtrig(port);
+	if (rxtrig_bytes < 0)
+		return rxtrig_bytes;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", rxtrig_bytes);
+}
+
+static int do_set_rxtrig(struct tty_port *port, unsigned char bytes)
+{
+	struct uart_state *state = container_of(port, struct uart_state, port);
+	struct uart_port *uport = state->uart_port;
+	struct uart_8250_port *up =
+		container_of(uport, struct uart_8250_port, port);
+	int rxtrig;
+
+	if (!(up->capabilities & UART_CAP_FIFO) || uport->fifosize <= 1 ||
+	    up->fifo_bug)
+		return -EINVAL;
+
+	rxtrig = bytes_to_fcr_rxtrig(up, bytes);
+	if (rxtrig < 0)
+		return rxtrig;
+
+	serial8250_clear_fifos(up);
+	up->fcr &= ~UART_FCR_TRIGGER_MASK;
+	up->fcr |= (unsigned char)rxtrig;
+	serial_out(up, UART_FCR, up->fcr);
+	return 0;
+}
+
+static int do_serial8250_set_rxtrig(struct tty_port *port, unsigned char bytes)
+{
+	int ret;
+
+	mutex_lock(&port->mutex);
+	ret = do_set_rxtrig(port, bytes);
+	mutex_unlock(&port->mutex);
+
+	return ret;
+}
+
+static ssize_t serial8250_set_attr_rx_trig_bytes(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct tty_port *port = dev_get_drvdata(dev);
+	unsigned char bytes;
+	int ret;
+
+	if (!count)
+		return -EINVAL;
+
+	ret = kstrtou8(buf, 10, &bytes);
+	if (ret < 0)
+		return ret;
+
+	ret = do_serial8250_set_rxtrig(port, bytes);
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR(rx_trig_bytes, S_IRUSR | S_IWUSR | S_IRGRP,
+		   serial8250_get_attr_rx_trig_bytes,
+		   serial8250_set_attr_rx_trig_bytes);
+
+static struct attribute *serial8250_dev_attrs[] = {
+	&dev_attr_rx_trig_bytes.attr,
+	NULL,
+	};
+
+static struct attribute_group serial8250_dev_attr_group = {
+	.attrs = serial8250_dev_attrs,
+	};
+
+static void register_dev_spec_attr_grp(struct uart_8250_port *up)
+{
+	const struct serial8250_config *conf_type = &uart_config[up->port.type];
+
+	if (conf_type->rxtrig_bytes[0])
+		up->port.attr_group = &serial8250_dev_attr_group;
+}
+
 static void serial8250_config_port(struct uart_port *port, int flags)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
@@ -2687,6 +2827,9 @@ static void serial8250_config_port(struct uart_port *port, int flags)
 	if ((port->type == PORT_XR17V35X) ||
 	   (port->type == PORT_XR17D15X))
 		port->handle_irq = exar_handle_irq;
+
+	register_dev_spec_attr_grp(up);
+	up->fcr = uart_config[up->port.type].fcr;
 }
 
 static int