summaryrefslogtreecommitdiffstats
path: root/drivers/tty
diff options
context:
space:
mode:
authorMarek Szyprowski <m.szyprowski@samsung.com>2018-09-13 10:21:25 +0200
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2018-09-18 16:07:24 +0200
commit1ff3652bc7111df26b5807037f624be294cf69d5 (patch)
tree344b23b8e50d8bf6c4e0efcc69809f31ea5c8a36 /drivers/tty
parentserial: sh-sci: Add earlycon for R7S9210 (diff)
downloadlinux-1ff3652bc7111df26b5807037f624be294cf69d5.tar.xz
linux-1ff3652bc7111df26b5807037f624be294cf69d5.zip
serial: samsung: Enable baud clock for UART reset procedure in resume
Ensure that the baud clock is also enabled for UART register writes in driver resume. On Exynos5433 SoC this is needed to avoid external abort issue. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/samsung.c8
1 files changed, 8 insertions, 0 deletions
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 2f8fa184aafa..da1bd4bba8a9 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1941,7 +1941,11 @@ static int s3c24xx_serial_resume(struct device *dev)
if (port) {
clk_prepare_enable(ourport->clk);
+ if (!IS_ERR(ourport->baudclk))
+ clk_prepare_enable(ourport->baudclk);
s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
+ if (!IS_ERR(ourport->baudclk))
+ clk_disable_unprepare(ourport->baudclk);
clk_disable_unprepare(ourport->clk);
uart_resume_port(&s3c24xx_uart_drv, port);
@@ -1964,7 +1968,11 @@ static int s3c24xx_serial_resume_noirq(struct device *dev)
if (rx_enabled(port))
uintm &= ~S3C64XX_UINTM_RXD_MSK;
clk_prepare_enable(ourport->clk);
+ if (!IS_ERR(ourport->baudclk))
+ clk_prepare_enable(ourport->baudclk);
wr_regl(port, S3C64XX_UINTM, uintm);
+ if (!IS_ERR(ourport->baudclk))
+ clk_disable_unprepare(ourport->baudclk);
clk_disable_unprepare(ourport->clk);
}
}